summaryrefslogtreecommitdiff
path: root/drivers/char/istallion.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/istallion.c')
-rw-r--r--drivers/char/istallion.c221
1 files changed, 70 insertions, 151 deletions
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 4b10770fa937..5c3dc6b8411c 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -151,7 +151,7 @@ static char *stli_drvversion = "5.6.0";
static char *stli_serialname = "ttyE";
static struct tty_driver *stli_serial;
-
+static const struct tty_port_operations stli_port_ops;
#define STLI_TXBUFSIZE 4096
@@ -626,8 +626,6 @@ static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp);
static int stli_initopen(struct tty_struct *tty, struct stlibrd *brdp, struct stliport *portp);
static int stli_rawopen(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
static int stli_rawclose(struct stlibrd *brdp, struct stliport *portp, unsigned long arg, int wait);
-static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
- struct stliport *portp, struct file *filp);
static int stli_setport(struct tty_struct *tty);
static int stli_cmdwait(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
static void stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigned long cmd, void *arg, int size, int copyback);
@@ -769,7 +767,7 @@ static int stli_parsebrd(struct stlconf *confp, char **argp)
break;
}
if (i == ARRAY_SIZE(stli_brdstr)) {
- printk("STALLION: unknown board name, %s?\n", argp[0]);
+ printk(KERN_WARNING "istallion: unknown board name, %s?\n", argp[0]);
return 0;
}
@@ -787,6 +785,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
{
struct stlibrd *brdp;
struct stliport *portp;
+ struct tty_port *port;
unsigned int minordev, brdnr, portnr;
int rc;
@@ -808,30 +807,19 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
return -ENODEV;
if (portp->devnr < 1)
return -ENODEV;
-
-
-/*
- * Check if this port is in the middle of closing. If so then wait
- * until it is closed then return error status based on flag settings.
- * The sleep here does not need interrupt protection since the wakeup
- * for it is done with the same context.
- */
- if (portp->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->port.close_wait);
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
+ port = &portp->port;
/*
* On the first open of the device setup the port hardware, and
* initialize the per port data structure. Since initializing the port
* requires several commands to the board we will need to wait for any
* other open that is already initializing the port.
+ *
+ * Review - locking
*/
- tty_port_tty_set(&portp->port, tty);
+ tty_port_tty_set(port, tty);
tty->driver_data = portp;
- portp->port.count++;
+ port->count++;
wait_event_interruptible(portp->raw_wait,
!test_bit(ST_INITIALIZING, &portp->state));
@@ -841,7 +829,8 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
if ((rc = stli_initopen(tty, brdp, portp)) >= 0) {
- portp->port.flags |= ASYNC_INITIALIZED;
+ /* Locking */
+ port->flags |= ASYNC_INITIALIZED;
clear_bit(TTY_IO_ERROR, &tty->flags);
}
clear_bit(ST_INITIALIZING, &portp->state);
@@ -849,31 +838,7 @@ static int stli_open(struct tty_struct *tty, struct file *filp)
if (rc < 0)
return rc;
}
-
-/*
- * Check if this port is in the middle of closing. If so then wait
- * until it is closed then return error status, based on flag settings.
- * The sleep here does not need interrupt protection since the wakeup
- * for it is done with the same context.
- */
- if (portp->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->port.close_wait);
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
-/*
- * Based on type of open being done check if it can overlap with any
- * previous opens still in effect. If we are a normal serial device
- * then also we might have to wait for carrier.
- */
- if (!(filp->f_flags & O_NONBLOCK)) {
- if ((rc = stli_waitcarrier(tty, brdp, portp, filp)) != 0)
- return rc;
- }
- portp->port.flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
+ return tty_port_block_til_ready(&portp->port, tty, filp);
}
/*****************************************************************************/
@@ -882,25 +847,16 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
{
struct stlibrd *brdp;
struct stliport *portp;
+ struct tty_port *port;
unsigned long flags;
portp = tty->driver_data;
if (portp == NULL)
return;
+ port = &portp->port;
- spin_lock_irqsave(&stli_lock, flags);
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&stli_lock, flags);
- return;
- }
- if ((tty->count == 1) && (portp->port.count != 1))
- portp->port.count = 1;
- if (portp->port.count-- > 1) {
- spin_unlock_irqrestore(&stli_lock, flags);
+ if (tty_port_close_start(port, tty, filp) == 0)
return;
- }
-
- portp->port.flags |= ASYNC_CLOSING;
/*
* May want to wait for data to drain before closing. The BUSY flag
@@ -908,15 +864,19 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
* updated by messages from the slave - indicating when all chars
* really have drained.
*/
+ spin_lock_irqsave(&stli_lock, flags);
if (tty == stli_txcooktty)
stli_flushchars(tty);
- tty->closing = 1;
spin_unlock_irqrestore(&stli_lock, flags);
+ /* We end up doing this twice for the moment. This needs looking at
+ eventually. Note we still use portp->closing_wait as a result */
if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, portp->closing_wait);
- portp->port.flags &= ~ASYNC_INITIALIZED;
+ /* FIXME: port locking here needs attending to */
+ port->flags &= ~ASYNC_INITIALIZED;
+
brdp = stli_brds[portp->brdnr];
stli_rawclose(brdp, portp, 0, 0);
if (tty->termios->c_cflag & HUPCL) {
@@ -934,17 +894,8 @@ static void stli_close(struct tty_struct *tty, struct file *filp)
set_bit(ST_DOFLUSHRX, &portp->state);
stli_flushbuffer(tty);
- tty->closing = 0;
- tty_port_tty_set(&portp->port, NULL);
-
- if (portp->openwaitcnt) {
- if (portp->close_delay)
- msleep_interruptible(jiffies_to_msecs(portp->close_delay));
- wake_up_interruptible(&portp->port.open_wait);
- }
-
- portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&portp->port.close_wait);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
/*****************************************************************************/
@@ -1183,62 +1134,23 @@ static int stli_setport(struct tty_struct *tty)
/*****************************************************************************/
-/*
- * Possibly need to wait for carrier (DCD signal) to come high. Say
- * maybe because if we are clocal then we don't need to wait...
- */
-
-static int stli_waitcarrier(struct tty_struct *tty, struct stlibrd *brdp,
- struct stliport *portp, struct file *filp)
+static int stli_carrier_raised(struct tty_port *port)
{
- unsigned long flags;
- int rc, doclocal;
-
- rc = 0;
- doclocal = 0;
-
- if (tty->termios->c_cflag & CLOCAL)
- doclocal++;
-
- spin_lock_irqsave(&stli_lock, flags);
- portp->openwaitcnt++;
- if (! tty_hung_up_p(filp))
- portp->port.count--;
- spin_unlock_irqrestore(&stli_lock, flags);
-
- for (;;) {
- stli_mkasysigs(&portp->asig, 1, 1);
- if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS,
- &portp->asig, sizeof(asysigs_t), 0)) < 0)
- break;
- if (tty_hung_up_p(filp) ||
- ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- rc = -EBUSY;
- else
- rc = -ERESTARTSYS;
- break;
- }
- if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
- (doclocal || (portp->sigs & TIOCM_CD))) {
- break;
- }
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- interruptible_sleep_on(&portp->port.open_wait);
- }
-
- spin_lock_irqsave(&stli_lock, flags);
- if (! tty_hung_up_p(filp))
- portp->port.count++;
- portp->openwaitcnt--;
- spin_unlock_irqrestore(&stli_lock, flags);
+ struct stliport *portp = container_of(port, struct stliport, port);
+ return (portp->sigs & TIOCM_CD) ? 1 : 0;
+}
- return rc;
+static void stli_raise_dtr_rts(struct tty_port *port)
+{
+ struct stliport *portp = container_of(port, struct stliport, port);
+ struct stlibrd *brdp = stli_brds[portp->brdnr];
+ stli_mkasysigs(&portp->asig, 1, 1);
+ if (stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+ sizeof(asysigs_t), 0) < 0)
+ printk(KERN_WARNING "istallion: dtr raise failed.\n");
}
+
/*****************************************************************************/
/*
@@ -1550,7 +1462,7 @@ static int stli_getserial(struct stliport *portp, struct serial_struct __user *s
sio.irq = 0;
sio.flags = portp->port.flags;
sio.baud_base = portp->baud_base;
- sio.close_delay = portp->close_delay;
+ sio.close_delay = portp->port.close_delay;
sio.closing_wait = portp->closing_wait;
sio.custom_divisor = portp->custom_divisor;
sio.xmit_fifo_size = 0;
@@ -1582,7 +1494,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s
return -EFAULT;
if (!capable(CAP_SYS_ADMIN)) {
if ((sio.baud_base != portp->baud_base) ||
- (sio.close_delay != portp->close_delay) ||
+ (sio.close_delay != portp->port.close_delay) ||
((sio.flags & ~ASYNC_USR_MASK) !=
(portp->port.flags & ~ASYNC_USR_MASK)))
return -EPERM;
@@ -1591,7 +1503,7 @@ static int stli_setserial(struct tty_struct *tty, struct serial_struct __user *s
portp->port.flags = (portp->port.flags & ~ASYNC_USR_MASK) |
(sio.flags & ASYNC_USR_MASK);
portp->baud_base = sio.baud_base;
- portp->close_delay = sio.close_delay;
+ portp->port.close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
@@ -1821,6 +1733,7 @@ static void stli_hangup(struct tty_struct *tty)
{
struct stliport *portp;
struct stlibrd *brdp;
+ struct tty_port *port;
unsigned long flags;
portp = tty->driver_data;
@@ -1831,8 +1744,11 @@ static void stli_hangup(struct tty_struct *tty)
brdp = stli_brds[portp->brdnr];
if (brdp == NULL)
return;
+ port = &portp->port;
- portp->port.flags &= ~ASYNC_INITIALIZED;
+ spin_lock_irqsave(&port->lock, flags);
+ port->flags &= ~ASYNC_INITIALIZED;
+ spin_unlock_irqrestore(&port->lock, flags);
if (!test_bit(ST_CLOSING, &portp->state))
stli_rawclose(brdp, portp, 0, 0);
@@ -1853,12 +1769,9 @@ static void stli_hangup(struct tty_struct *tty)
clear_bit(ST_TXBUSY, &portp->state);
clear_bit(ST_RXSTOP, &portp->state);
set_bit(TTY_IO_ERROR, &tty->flags);
- tty_port_tty_set(&portp->port, NULL);
- portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- portp->port.count = 0;
spin_unlock_irqrestore(&stli_lock, flags);
- wake_up_interruptible(&portp->port.open_wait);
+ tty_port_hangup(port);
}
/*****************************************************************************/
@@ -2132,7 +2045,7 @@ static void __stli_sendcmd(struct stlibrd *brdp, struct stliport *portp, unsigne
unsigned char __iomem *bits;
if (test_bit(ST_CMDING, &portp->state)) {
- printk(KERN_ERR "STALLION: command already busy, cmd=%x!\n",
+ printk(KERN_ERR "istallion: command already busy, cmd=%x!\n",
(int) cmd);
return;
}
@@ -2692,16 +2605,17 @@ static int stli_initports(struct stlibrd *brdp)
for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
portp = kzalloc(sizeof(struct stliport), GFP_KERNEL);
if (!portp) {
- printk("STALLION: failed to allocate port structure\n");
+ printk(KERN_WARNING "istallion: failed to allocate port structure\n");
continue;
}
tty_port_init(&portp->port);
+ portp->port.ops = &stli_port_ops;
portp->magic = STLI_PORTMAGIC;
portp->portnr = i;
portp->brdnr = brdp->brdnr;
portp->panelnr = panelnr;
portp->baud_base = STL_BAUDBASE;
- portp->close_delay = STL_CLOSEDELAY;
+ portp->port.close_delay = STL_CLOSEDELAY;
portp->closing_wait = 30 * HZ;
init_waitqueue_head(&portp->port.open_wait);
init_waitqueue_head(&portp->port.close_wait);
@@ -2758,7 +2672,7 @@ static void __iomem *stli_ecpgetmemptr(struct stlibrd *brdp, unsigned long offse
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2832,7 +2746,7 @@ static void __iomem *stli_ecpeigetmemptr(struct stlibrd *brdp, unsigned long off
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2884,7 +2798,7 @@ static void __iomem *stli_ecpmcgetmemptr(struct stlibrd *brdp, unsigned long off
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2929,7 +2843,7 @@ static void __iomem *stli_ecppcigetmemptr(struct stlibrd *brdp, unsigned long of
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), board=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -2994,7 +2908,7 @@ static void __iomem *stli_onbgetmemptr(struct stlibrd *brdp, unsigned long offse
void __iomem *ptr;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -3060,7 +2974,7 @@ static void __iomem *stli_onbegetmemptr(struct stlibrd *brdp, unsigned long offs
unsigned char val;
if (offset > brdp->memsize) {
- printk(KERN_ERR "STALLION: shared memory pointer=%x out of "
+ printk(KERN_ERR "istallion: shared memory pointer=%x out of "
"range at line=%d(%d), brd=%d\n",
(int) offset, line, __LINE__, brdp->brdnr);
ptr = NULL;
@@ -3499,7 +3413,7 @@ static int stli_startbrd(struct stlibrd *brdp)
#endif
if (nrdevs < (brdp->nrports + 1)) {
- printk(KERN_ERR "STALLION: slave failed to allocate memory for "
+ printk(KERN_ERR "istallion: slave failed to allocate memory for "
"all devices, devices=%d\n", nrdevs);
brdp->nrports = nrdevs - 1;
}
@@ -3509,13 +3423,13 @@ static int stli_startbrd(struct stlibrd *brdp)
brdp->bitsize = (nrdevs + 7) / 8;
memoff = readl(&hdrp->memp);
if (memoff > brdp->memsize) {
- printk(KERN_ERR "STALLION: corrupted shared memory region?\n");
+ printk(KERN_ERR "istallion: corrupted shared memory region?\n");
rc = -EIO;
goto stli_donestartup;
}
memp = (cdkmem_t __iomem *) EBRDGETMEMPTR(brdp, memoff);
if (readw(&memp->dtype) != TYP_ASYNCTRL) {
- printk(KERN_ERR "STALLION: no slave control device found\n");
+ printk(KERN_ERR "istallion: no slave control device found\n");
goto stli_donestartup;
}
memp++;
@@ -3600,7 +3514,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp)
retval = stli_initonb(brdp);
break;
default:
- printk(KERN_ERR "STALLION: board=%d is unknown board "
+ printk(KERN_ERR "istallion: board=%d is unknown board "
"type=%d\n", brdp->brdnr, brdp->brdtype);
retval = -ENODEV;
}
@@ -3609,7 +3523,7 @@ static int __devinit stli_brdinit(struct stlibrd *brdp)
return retval;
stli_initports(brdp);
- printk(KERN_INFO "STALLION: %s found, board=%d io=%x mem=%x "
+ printk(KERN_INFO "istallion: %s found, board=%d io=%x mem=%x "
"nrpanels=%d nrports=%d\n", stli_brdnames[brdp->brdtype],
brdp->brdnr, brdp->iobase, (int) brdp->memaddr,
brdp->nrpanels, brdp->nrports);
@@ -3703,7 +3617,7 @@ static int stli_eisamemprobe(struct stlibrd *brdp)
if (! foundit) {
brdp->memaddr = 0;
brdp->membase = NULL;
- printk(KERN_ERR "STALLION: failed to probe shared memory "
+ printk(KERN_ERR "istallion: failed to probe shared memory "
"region for %s in EISA slot=%d\n",
stli_brdnames[brdp->brdtype], (brdp->iobase >> 12));
return -ENODEV;
@@ -3848,7 +3762,7 @@ static int __devinit stli_pciprobe(struct pci_dev *pdev,
mutex_lock(&stli_brdslock);
brdnr = stli_getbrdnr();
if (brdnr < 0) {
- printk(KERN_INFO "STALLION: too many boards found, "
+ printk(KERN_INFO "istallion: too many boards found, "
"maximum supported %d\n", STL_MAXBRDS);
mutex_unlock(&stli_brdslock);
retval = -EIO;
@@ -3920,7 +3834,7 @@ static struct stlibrd *stli_allocbrd(void)
brdp = kzalloc(sizeof(struct stlibrd), GFP_KERNEL);
if (!brdp) {
- printk(KERN_ERR "STALLION: failed to allocate memory "
+ printk(KERN_ERR "istallion: failed to allocate memory "
"(size=%Zd)\n", sizeof(struct stlibrd));
return NULL;
}
@@ -4518,6 +4432,11 @@ static const struct tty_operations stli_ops = {
.tiocmset = stli_tiocmset,
};
+static const struct tty_port_operations stli_port_ops = {
+ .carrier_raised = stli_carrier_raised,
+ .raise_dtr_rts = stli_raise_dtr_rts,
+};
+
/*****************************************************************************/
/*
* Loadable module initialization stuff.
@@ -4554,7 +4473,7 @@ static int __init istallion_module_init(void)
stli_txcookbuf = kmalloc(STLI_TXBUFSIZE, GFP_KERNEL);
if (!stli_txcookbuf) {
- printk(KERN_ERR "STALLION: failed to allocate memory "
+ printk(KERN_ERR "istallion: failed to allocate memory "
"(size=%d)\n", STLI_TXBUFSIZE);
retval = -ENOMEM;
goto err;
@@ -4579,7 +4498,7 @@ static int __init istallion_module_init(void)
retval = tty_register_driver(stli_serial);
if (retval) {
- printk(KERN_ERR "STALLION: failed to register serial driver\n");
+ printk(KERN_ERR "istallion: failed to register serial driver\n");
goto err_ttyput;
}
@@ -4593,7 +4512,7 @@ static int __init istallion_module_init(void)
*/
retval = register_chrdev(STL_SIOMEMMAJOR, "staliomem", &stli_fsiomem);
if (retval) {
- printk(KERN_ERR "STALLION: failed to register serial memory "
+ printk(KERN_ERR "istallion: failed to register serial memory "
"device\n");
goto err_deinit;
}