diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/armada-37xx-cpufreq.c | 37 |
1 files changed, 37 insertions, 0 deletions
diff --git a/drivers/cpufreq/armada-37xx-cpufreq.c b/drivers/cpufreq/armada-37xx-cpufreq.c index b8dc6c849579..c7683d447b11 100644 --- a/drivers/cpufreq/armada-37xx-cpufreq.c +++ b/drivers/cpufreq/armada-37xx-cpufreq.c @@ -73,6 +73,8 @@ #define LOAD_LEVEL_NR 4 #define MIN_VOLT_MV 1000 +#define MIN_VOLT_MV_FOR_L1_1000MHZ 1108 +#define MIN_VOLT_MV_FOR_L1_1200MHZ 1155 /* AVS value for the corresponding voltage (in mV) */ static int avs_map[] = { @@ -208,6 +210,8 @@ static u32 armada_37xx_avs_val_match(int target_vm) * - L2 & L3 voltage should be about 150mv smaller than L0 voltage. * This function calculates L1 & L2 & L3 AVS values dynamically based * on L0 voltage and fill all AVS values to the AVS value table. + * When base CPU frequency is 1000 or 1200 MHz then there is additional + * minimal avs value for load L1. */ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base, struct armada_37xx_dvfs *dvfs) @@ -239,6 +243,19 @@ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base, for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) dvfs->avs[load_level] = avs_min; + /* + * Set the avs values for load L0 and L1 when base CPU frequency + * is 1000/1200 MHz to its typical initial values according to + * the Armada 3700 Hardware Specifications. + */ + if (dvfs->cpu_freq_max >= 1000*1000*1000) { + if (dvfs->cpu_freq_max >= 1200*1000*1000) + avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1200MHZ); + else + avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1000MHZ); + dvfs->avs[0] = dvfs->avs[1] = avs_min; + } + return; } @@ -258,6 +275,26 @@ static void __init armada37xx_cpufreq_avs_configure(struct regmap *base, target_vm = avs_map[l0_vdd_min] - 150; target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV; dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm); + + /* + * Fix the avs value for load L1 when base CPU frequency is 1000/1200 MHz, + * otherwise the CPU gets stuck when switching from load L1 to load L0. + * Also ensure that avs value for load L1 is not higher than for L0. + */ + if (dvfs->cpu_freq_max >= 1000*1000*1000) { + u32 avs_min_l1; + + if (dvfs->cpu_freq_max >= 1200*1000*1000) + avs_min_l1 = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1200MHZ); + else + avs_min_l1 = armada_37xx_avs_val_match(MIN_VOLT_MV_FOR_L1_1000MHZ); + + if (avs_min_l1 > dvfs->avs[0]) + avs_min_l1 = dvfs->avs[0]; + + if (dvfs->avs[1] < avs_min_l1) + dvfs->avs[1] = avs_min_l1; + } } static void __init armada37xx_cpufreq_avs_setup(struct regmap *base, |