diff options
Diffstat (limited to 'drivers/dma/ste_dma40_ll.c')
| -rw-r--r-- | drivers/dma/ste_dma40_ll.c | 101 |
1 files changed, 48 insertions, 53 deletions
diff --git a/drivers/dma/ste_dma40_ll.c b/drivers/dma/ste_dma40_ll.c index 435a223c891f..ab5a2a706f7a 100644 --- a/drivers/dma/ste_dma40_ll.c +++ b/drivers/dma/ste_dma40_ll.c @@ -50,63 +50,58 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg, } -/* Sets up SRC and DST CFG register for both logical and physical channels */ -void d40_phy_cfg(struct stedma40_chan_cfg *cfg, - u32 *src_cfg, u32 *dst_cfg, bool is_log) +void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg) { u32 src = 0; u32 dst = 0; - if (!is_log) { - /* Physical channel */ - if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { - /* Set master port to 1 */ - src |= 1 << D40_SREG_CFG_MST_POS; - src |= D40_TYPE_TO_EVENT(cfg->dev_type); - - if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - src |= 1 << D40_SREG_CFG_PHY_TM_POS; - else - src |= 3 << D40_SREG_CFG_PHY_TM_POS; - } - if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || - (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { - /* Set master port to 1 */ - dst |= 1 << D40_SREG_CFG_MST_POS; - dst |= D40_TYPE_TO_EVENT(cfg->dev_type); - - if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) - dst |= 1 << D40_SREG_CFG_PHY_TM_POS; - else - dst |= 3 << D40_SREG_CFG_PHY_TM_POS; - } - /* Interrupt on end of transfer for destination */ - dst |= 1 << D40_SREG_CFG_TIM_POS; - - /* Generate interrupt on error */ - src |= 1 << D40_SREG_CFG_EIM_POS; - dst |= 1 << D40_SREG_CFG_EIM_POS; - - /* PSIZE */ - if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { - src |= 1 << D40_SREG_CFG_PHY_PEN_POS; - src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; - } - if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { - dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; - dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; - } - - /* Element size */ - src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; - dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; - - /* Set the priority bit to high for the physical channel */ - if (cfg->high_priority) { - src |= 1 << D40_SREG_CFG_PRI_POS; - dst |= 1 << D40_SREG_CFG_PRI_POS; - } + if ((cfg->dir == STEDMA40_PERIPH_TO_MEM) || + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + /* Set master port to 1 */ + src |= 1 << D40_SREG_CFG_MST_POS; + src |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + src |= 1 << D40_SREG_CFG_PHY_TM_POS; + else + src |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + if ((cfg->dir == STEDMA40_MEM_TO_PERIPH) || + (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) { + /* Set master port to 1 */ + dst |= 1 << D40_SREG_CFG_MST_POS; + dst |= D40_TYPE_TO_EVENT(cfg->dev_type); + + if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL) + dst |= 1 << D40_SREG_CFG_PHY_TM_POS; + else + dst |= 3 << D40_SREG_CFG_PHY_TM_POS; + } + /* Interrupt on end of transfer for destination */ + dst |= 1 << D40_SREG_CFG_TIM_POS; + + /* Generate interrupt on error */ + src |= 1 << D40_SREG_CFG_EIM_POS; + dst |= 1 << D40_SREG_CFG_EIM_POS; + + /* PSIZE */ + if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) { + src |= 1 << D40_SREG_CFG_PHY_PEN_POS; + src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS; + } + if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) { + dst |= 1 << D40_SREG_CFG_PHY_PEN_POS; + dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS; + } + + /* Element size */ + src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS; + dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS; + + /* Set the priority bit to high for the physical channel */ + if (cfg->high_priority) { + src |= 1 << D40_SREG_CFG_PRI_POS; + dst |= 1 << D40_SREG_CFG_PRI_POS; } if (cfg->src_info.big_endian) |