summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/i915_irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/i915_irq.c')
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c676
1 files changed, 169 insertions, 507 deletions
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 26f48932a51e..69b9a42da95e 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -33,11 +33,23 @@
#define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \
- I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+ I915_INTERRUPT_ENABLE_VAR)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -59,6 +71,41 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask)
}
}
+static inline u32
+i915_pipestat(int pipe)
+{
+ if (pipe == 0)
+ return PIPEASTAT;
+ if (pipe == 1)
+ return PIPEBSTAT;
+ BUG();
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != mask) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] |= mask;
+ /* Enable the interrupt, clear any pending status */
+ I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+ (void) I915_READ(reg);
+ }
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != 0) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] &= ~mask;
+ I915_WRITE(reg, dev_priv->pipestat[pipe]);
+ (void) I915_READ(reg);
+ }
+}
+
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
@@ -80,211 +127,6 @@ i915_pipe_enabled(struct drm_device *dev, int pipe)
return 0;
}
-/**
- * Emit blits for scheduled buffer swaps.
- *
- * This function will be called with the HW lock held.
- * Because this function must grab the ring mutex (dev->struct_mutex),
- * it can no longer run at soft irq time. We'll fix this when we do
- * the DRI2 swap buffer work.
- */
-static void i915_vblank_tasklet(struct drm_device *dev)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long irqflags;
- struct list_head *list, *tmp, hits, *hit;
- int nhits, nrects, slice[2], upper[2], lower[2], i;
- unsigned counter[2];
- struct drm_drawable_info *drw;
- drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
- u32 cpp = dev_priv->cpp;
- u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
- XY_SRC_COPY_BLT_WRITE_ALPHA |
- XY_SRC_COPY_BLT_WRITE_RGB)
- : XY_SRC_COPY_BLT_CMD;
- u32 src_pitch = sarea_priv->pitch * cpp;
- u32 dst_pitch = sarea_priv->pitch * cpp;
- u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
- RING_LOCALS;
-
- mutex_lock(&dev->struct_mutex);
-
- if (IS_I965G(dev) && sarea_priv->front_tiled) {
- cmd |= XY_SRC_COPY_BLT_DST_TILED;
- dst_pitch >>= 2;
- }
- if (IS_I965G(dev) && sarea_priv->back_tiled) {
- cmd |= XY_SRC_COPY_BLT_SRC_TILED;
- src_pitch >>= 2;
- }
-
- counter[0] = drm_vblank_count(dev, 0);
- counter[1] = drm_vblank_count(dev, 1);
-
- DRM_DEBUG("\n");
-
- INIT_LIST_HEAD(&hits);
-
- nhits = nrects = 0;
-
- spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
- /* Find buffer swaps scheduled for this vertical blank */
- list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
- drm_i915_vbl_swap_t *vbl_swap =
- list_entry(list, drm_i915_vbl_swap_t, head);
- int pipe = vbl_swap->pipe;
-
- if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
- continue;
-
- list_del(list);
- dev_priv->swaps_pending--;
- drm_vblank_put(dev, pipe);
-
- spin_unlock(&dev_priv->swaps_lock);
- spin_lock(&dev->drw_lock);
-
- drw = drm_get_drawable_info(dev, vbl_swap->drw_id);
-
- list_for_each(hit, &hits) {
- drm_i915_vbl_swap_t *swap_cmp =
- list_entry(hit, drm_i915_vbl_swap_t, head);
- struct drm_drawable_info *drw_cmp =
- drm_get_drawable_info(dev, swap_cmp->drw_id);
-
- /* Make sure both drawables are still
- * around and have some rectangles before
- * we look inside to order them for the
- * blts below.
- */
- if (drw_cmp && drw_cmp->num_rects > 0 &&
- drw && drw->num_rects > 0 &&
- drw_cmp->rects[0].y1 > drw->rects[0].y1) {
- list_add_tail(list, hit);
- break;
- }
- }
-
- spin_unlock(&dev->drw_lock);
-
- /* List of hits was empty, or we reached the end of it */
- if (hit == &hits)
- list_add_tail(list, hits.prev);
-
- nhits++;
-
- spin_lock(&dev_priv->swaps_lock);
- }
-
- if (nhits == 0) {
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
- mutex_unlock(&dev->struct_mutex);
- return;
- }
-
- spin_unlock(&dev_priv->swaps_lock);
-
- i915_kernel_lost_context(dev);
-
- if (IS_I965G(dev)) {
- BEGIN_LP_RING(4);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
- OUT_RING(0);
- OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16));
- OUT_RING(0);
- ADVANCE_LP_RING();
- } else {
- BEGIN_LP_RING(6);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(sarea_priv->width | sarea_priv->height << 16);
- OUT_RING(sarea_priv->width | sarea_priv->height << 16);
- OUT_RING(0);
-
- ADVANCE_LP_RING();
- }
-
- sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
-
- upper[0] = upper[1] = 0;
- slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
- slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
- lower[0] = sarea_priv->pipeA_y + slice[0];
- lower[1] = sarea_priv->pipeB_y + slice[0];
-
- spin_lock(&dev->drw_lock);
-
- /* Emit blits for buffer swaps, partitioning both outputs into as many
- * slices as there are buffer swaps scheduled in order to avoid tearing
- * (based on the assumption that a single buffer swap would always
- * complete before scanout starts).
- */
- for (i = 0; i++ < nhits;
- upper[0] = lower[0], lower[0] += slice[0],
- upper[1] = lower[1], lower[1] += slice[1]) {
- if (i == nhits)
- lower[0] = lower[1] = sarea_priv->height;
-
- list_for_each(hit, &hits) {
- drm_i915_vbl_swap_t *swap_hit =
- list_entry(hit, drm_i915_vbl_swap_t, head);
- struct drm_clip_rect *rect;
- int num_rects, pipe;
- unsigned short top, bottom;
-
- drw = drm_get_drawable_info(dev, swap_hit->drw_id);
-
- /* The drawable may have been destroyed since
- * the vblank swap was queued
- */
- if (!drw)
- continue;
-
- rect = drw->rects;
- pipe = swap_hit->pipe;
- top = upper[pipe];
- bottom = lower[pipe];
-
- for (num_rects = drw->num_rects; num_rects--; rect++) {
- int y1 = max(rect->y1, top);
- int y2 = min(rect->y2, bottom);
-
- if (y1 >= y2)
- continue;
-
- BEGIN_LP_RING(8);
-
- OUT_RING(cmd);
- OUT_RING(ropcpp | dst_pitch);
- OUT_RING((y1 << 16) | rect->x1);
- OUT_RING((y2 << 16) | rect->x2);
- OUT_RING(sarea_priv->front_offset);
- OUT_RING((y1 << 16) | rect->x1);
- OUT_RING(src_pitch);
- OUT_RING(sarea_priv->back_offset);
-
- ADVANCE_LP_RING();
- }
- }
- }
-
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- mutex_unlock(&dev->struct_mutex);
-
- list_for_each_safe(hit, tmp, &hits) {
- drm_i915_vbl_swap_t *swap_hit =
- list_entry(hit, drm_i915_vbl_swap_t, head);
-
- list_del(hit);
-
- drm_free(swap_hit, sizeof(*swap_hit), DRM_MEM_DRIVER);
- }
-}
-
/* Called from drm generic code, passed a 'crtc', which
* we use as a pipe index
*/
@@ -322,121 +164,106 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int pipe)
return count;
}
-void
-i915_vblank_work_handler(struct work_struct *work)
-{
- drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
- vblank_work);
- struct drm_device *dev = dev_priv->dev;
- unsigned long irqflags;
-
- if (dev->lock.hw_lock == NULL) {
- i915_vblank_tasklet(dev);
- return;
- }
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- dev->locked_tasklet_func = i915_vblank_tasklet;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- /* Try to get the lock now, if this fails, the lock
- * holder will execute the tasklet during unlock
- */
- if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT))
- return;
-
- dev->lock.lock_time = jiffies;
- atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
-
- spin_lock_irqsave(&dev->tasklet_lock, irqflags);
- dev->locked_tasklet_func = NULL;
- spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
-
- i915_vblank_tasklet(dev);
- drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT);
-}
-
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
+ u32 vblank_status;
+ u32 vblank_enable;
int vblank = 0;
+ unsigned long irqflags;
+ int irq_received;
+ int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, ~0);
iir = I915_READ(IIR);
- if (iir == 0) {
- if (dev->pdev->msi_enabled) {
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IMR);
- }
- return IRQ_NONE;
+ if (IS_I965G(dev)) {
+ vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ } else {
+ vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+ for (;;) {
+ irq_received = iir != 0;
+
+ /* Can't rely on pipestat interrupt bit in iir as it might
+ * have been cleared after the pipestat interrupt was received.
+ * It doesn't set the bit in iir again, but it still produces
+ * interrupts (for non-MSI).
+ */
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
- pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ pipeb_stats = I915_READ(PIPEBSTAT);
+ /*
+ * Clear the PIPE(A|B)STAT regs before the IIR
+ */
+ if (pipea_stats & 0x8000ffff) {
+ I915_WRITE(PIPEASTAT, pipea_stats);
+ irq_received = 1;
+ }
+
+ if (pipeb_stats & 0x8000ffff) {
+ I915_WRITE(PIPEBSTAT, pipeb_stats);
+ irq_received = 1;
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+ if (!irq_received)
+ break;
+
+ ret = IRQ_HANDLED;
+
+ I915_WRITE(IIR, iir);
+ new_iir = I915_READ(IIR); /* Flush posted writes */
+
+ if (dev_priv->sarea_priv)
+ dev_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+
+ if (iir & I915_USER_INTERRUPT) {
+ dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
+ if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
- I915_WRITE(PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(PIPEBSTAT);
- /* Ack the event */
- I915_WRITE(PIPEBSTAT, pipeb_stats);
-
- /* The vblank interrupt gets enabled even if we didn't ask for
- it, so make sure it's shut down again */
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
- pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
- if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+ if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+ (iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
- I915_WRITE(PIPEBSTAT, pipeb_stats);
- }
-
- I915_WRITE(IIR, iir);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IIR); /* Flush posted writes */
-
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ /* With MSI, interrupts are only generated when iir
+ * transitions from zero to nonzero. If another bit got
+ * set while we were handling the existing iir bits, then
+ * we would never get another interrupt.
+ *
+ * This is fine on non-MSI as well, as if we hit this path
+ * we avoid exiting the interrupt handler only to generate
+ * another one.
+ *
+ * Note that for MSI this could cause a stray interrupt report
+ * if an interrupt landed in the time between writing IIR and
+ * the posting read. This should be rare enough to never
+ * trigger the 99% of 100,000 interrupts test for disabling
+ * stray interrupts.
+ */
+ iir = new_iir;
}
- if (iir & I915_ASLE_INTERRUPT)
- opregion_asle_intr(dev);
-
- if (vblank && dev_priv->swaps_pending > 0)
- schedule_work(&dev_priv->vblank_work);
-
- return IRQ_HANDLED;
+ return ret;
}
static int i915_emit_irq(struct drm_device * dev)
@@ -454,12 +281,10 @@ static int i915_emit_irq(struct drm_device * dev)
if (dev_priv->sarea_priv)
dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
- BEGIN_LP_RING(6);
+ BEGIN_LP_RING(4);
OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(5 << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(I915_BREADCRUMB_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
OUT_RING(dev_priv->counter);
- OUT_RING(0);
- OUT_RING(0);
OUT_RING(MI_USER_INTERRUPT);
ADVANCE_LP_RING();
@@ -574,48 +399,16 @@ int i915_irq_wait(struct drm_device *dev, void *data,
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- return 0;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- /* Enabling vblank events in IMR comes before PIPESTAT write, or
- * there's a race where the PIPESTAT vblank bit gets set to 1, so
- * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
- * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
- * IMR masks it. It doesn't ever get set after we clear the masking
- * in IMR because the ISR bit is edge, not level-triggered, on the
- * OR of PIPESTAT bits.
- */
- i915_enable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
- pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
- pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
return 0;
}
@@ -625,37 +418,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- return;
- break;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
- pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
@@ -696,123 +464,21 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data,
int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
- drm_i915_vblank_swap_t *swap = data;
- drm_i915_vbl_swap_t *vbl_swap, *vbl_old;
- unsigned int pipe, seqtype, curseq;
- unsigned long irqflags;
- struct list_head *list;
- int ret;
-
- if (!dev_priv || !dev_priv->sarea_priv) {
- DRM_ERROR("%s called with no initialization\n", __func__);
- return -EINVAL;
- }
-
- if (dev_priv->sarea_priv->rotation) {
- DRM_DEBUG("Rotation not supported\n");
- return -EINVAL;
- }
-
- if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
- _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) {
- DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype);
- return -EINVAL;
- }
-
- pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
-
- seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
-
- if (!(dev_priv->vblank_pipe & (1 << pipe))) {
- DRM_ERROR("Invalid pipe %d\n", pipe);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&dev->drw_lock, irqflags);
-
- if (!drm_get_drawable_info(dev, swap->drawable)) {
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable);
- return -EINVAL;
- }
-
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-
- /*
- * We take the ref here and put it when the swap actually completes
- * in the tasklet.
+ /* The delayed swap mechanism was fundamentally racy, and has been
+ * removed. The model was that the client requested a delayed flip/swap
+ * from the kernel, then waited for vblank before continuing to perform
+ * rendering. The problem was that the kernel might wake the client
+ * up before it dispatched the vblank swap (since the lock has to be
+ * held while touching the ringbuffer), in which case the client would
+ * clear and start the next frame before the swap occurred, and
+ * flicker would occur in addition to likely missing the vblank.
+ *
+ * In the absence of this ioctl, userland falls back to a correct path
+ * of waiting for a vblank, then dispatching the swap on its own.
+ * Context switching to userland and back is plenty fast enough for
+ * meeting the requirements of vblank swapping.
*/
- ret = drm_vblank_get(dev, pipe);
- if (ret)
- return ret;
- curseq = drm_vblank_count(dev, pipe);
-
- if (seqtype == _DRM_VBLANK_RELATIVE)
- swap->sequence += curseq;
-
- if ((curseq - swap->sequence) <= (1<<23)) {
- if (swap->seqtype & _DRM_VBLANK_NEXTONMISS) {
- swap->sequence = curseq + 1;
- } else {
- DRM_DEBUG("Missed target sequence\n");
- drm_vblank_put(dev, pipe);
- return -EINVAL;
- }
- }
-
- vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER);
-
- if (!vbl_swap) {
- DRM_ERROR("Failed to allocate memory to queue swap\n");
- drm_vblank_put(dev, pipe);
- return -ENOMEM;
- }
-
- vbl_swap->drw_id = swap->drawable;
- vbl_swap->pipe = pipe;
- vbl_swap->sequence = swap->sequence;
-
- spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
-
- list_for_each(list, &dev_priv->vbl_swaps.head) {
- vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
-
- if (vbl_old->drw_id == swap->drawable &&
- vbl_old->pipe == pipe &&
- vbl_old->sequence == swap->sequence) {
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
- drm_vblank_put(dev, pipe);
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
- DRM_DEBUG("Already scheduled\n");
- return 0;
- }
- }
-
- if (dev_priv->swaps_pending >= 10) {
- DRM_DEBUG("Too many swaps queued\n");
- DRM_DEBUG(" pipe 0: %d pipe 1: %d\n",
- drm_vblank_count(dev, 0),
- drm_vblank_count(dev, 1));
-
- list_for_each(list, &dev_priv->vbl_swaps.head) {
- vbl_old = list_entry(list, drm_i915_vbl_swap_t, head);
- DRM_DEBUG("\tdrw %x pipe %d seq %x\n",
- vbl_old->drw_id, vbl_old->pipe,
- vbl_old->sequence);
- }
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
- drm_vblank_put(dev, pipe);
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
- return -EBUSY;
- }
-
- list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head);
- dev_priv->swaps_pending++;
-
- spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
-
- return 0;
+ return -EINVAL;
}
/* drm_dma.h hooks
@@ -822,37 +488,35 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
+ (void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
-
- spin_lock_init(&dev_priv->swaps_lock);
- INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
- INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler);
- dev_priv->swaps_pending = 0;
-
- /* Set initial unmasked IRQs to just the selected vblank pipes. */
- dev_priv->irq_mask_reg = ~0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+ /* Unmask the interrupts that we always want on. */
+ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ /* Disable pipe interrupt enables, clear pending pipe status */
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ /* Clear pending interrupt status */
+ I915_WRITE(IIR, I915_READ(IIR));
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
@@ -864,7 +528,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev)
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
if (!dev_priv)
return;
@@ -872,13 +535,12 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
- temp = I915_READ(PIPEASTAT);
- I915_WRITE(PIPEASTAT, temp);
- temp = I915_READ(PIPEBSTAT);
- I915_WRITE(PIPEBSTAT, temp);
- temp = I915_READ(IIR);
- I915_WRITE(IIR, temp);
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ I915_WRITE(IIR, I915_READ(IIR));
}