diff options
Diffstat (limited to 'drivers/hwmon/adt7475.c')
| -rw-r--r-- | drivers/hwmon/adt7475.c | 18 |
1 files changed, 7 insertions, 11 deletions
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 4224ffb30483..bc186c61a2c0 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -1676,7 +1676,6 @@ static int adt7475_probe(struct i2c_client *client) struct device *hwmon_dev; int i, ret = 0, revision, group_num = 0; u8 config3; - const struct i2c_device_id *id = i2c_match_id(adt7475_id, client); data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); if (data == NULL) @@ -1686,10 +1685,7 @@ static int adt7475_probe(struct i2c_client *client) data->client = client; i2c_set_clientdata(client, data); - if (client->dev.of_node) - chip = (uintptr_t)of_device_get_match_data(&client->dev); - else - chip = id->driver_data; + chip = (uintptr_t)i2c_get_match_data(client); /* Initialize device-specific values */ switch (chip) { @@ -1717,7 +1713,7 @@ static int adt7475_probe(struct i2c_client *client) if (!(config3 & CONFIG3_SMBALERT)) data->has_pwm2 = 1; /* Meaning of this bit is inverted for the ADT7473-1 */ - if (id->driver_data == adt7473 && revision >= 1) + if (chip == adt7473 && revision >= 1) data->has_pwm2 = !data->has_pwm2; data->config4 = adt7475_read(REG_CONFIG4); @@ -1730,12 +1726,12 @@ static int adt7475_probe(struct i2c_client *client) * because 2 different pins (TACH4 and +2.5 Vin) can be used for * this function */ - if (id->driver_data == adt7490) { + if (chip == adt7490) { if ((data->config4 & CONFIG4_PINFUNC) == 0x1 && !(config3 & CONFIG3_THERM)) data->has_fan4 = 1; } - if (id->driver_data == adt7476 || id->driver_data == adt7490) { + if (chip == adt7476 || chip == adt7490) { if (!(config3 & CONFIG3_THERM) || (data->config4 & CONFIG4_PINFUNC) == 0x1) data->has_voltage |= (1 << 0); /* in0 */ @@ -1745,7 +1741,7 @@ static int adt7475_probe(struct i2c_client *client) * On the ADT7476, the +12V input pin may instead be used as VID5, * and VID pins may alternatively be used as GPIO */ - if (id->driver_data == adt7476) { + if (chip == adt7476) { u8 vid = adt7475_read(REG_VID); if (!(vid & VID_VIDSEL)) data->has_voltage |= (1 << 4); /* in4 */ @@ -1829,7 +1825,7 @@ static int adt7475_probe(struct i2c_client *client) } dev_info(&client->dev, "%s device, revision %d\n", - names[id->driver_data], revision); + names[chip], revision); if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2) dev_info(&client->dev, "Optional features:%s%s%s%s%s\n", (data->has_voltage & (1 << 0)) ? " in0" : "", @@ -1900,7 +1896,7 @@ static void adt7475_read_pwm(struct i2c_client *client, int index) data->pwm[CONTROL][index] &= ~0xE0; data->pwm[CONTROL][index] |= (7 << 5); - i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), + i2c_smbus_write_byte_data(client, PWM_REG(index), data->pwm[INPUT][index]); i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index), |