summaryrefslogtreecommitdiff
path: root/drivers/ide/cs5520.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/cs5520.c')
-rw-r--r--drivers/ide/cs5520.c168
1 files changed, 0 insertions, 168 deletions
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
deleted file mode 100644
index 89a4ff100b7a..000000000000
--- a/drivers/ide/cs5520.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * IDE tuning and bus mastering support for the CS5510/CS5520
- * chipsets
- *
- * The CS5510/CS5520 are slightly unusual devices. Unlike the
- * typical IDE controllers they do bus mastering with the drive in
- * PIO mode and smarter silicon.
- *
- * The practical upshot of this is that we must always tune the
- * drive for the right PIO mode. We must also ignore all the blacklists
- * and the drive bus mastering DMA information.
- *
- * *** This driver is strictly experimental ***
- *
- * (c) Copyright Red Hat Inc 2002
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * For the avoidance of doubt the "preferred form" of this code is one which
- * is in an open non patent encumbered format. Where cryptographic key signing
- * forms part of the process of creating an executable the information
- * including keys needed to generate an equivalently functional executable
- * are deemed to be part of the source code.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-
-#define DRV_NAME "cs5520"
-
-struct pio_clocks
-{
- int address;
- int assert;
- int recovery;
-};
-
-static struct pio_clocks cs5520_pio_clocks[]={
- {3, 6, 11},
- {2, 5, 6},
- {1, 4, 3},
- {1, 3, 2},
- {1, 2, 1}
-};
-
-static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- int controller = drive->dn > 1 ? 1 : 0;
- const u8 pio = drive->pio_mode - XFER_PIO_0;
-
- /* 8bit CAT/CRT - 8bit command timing for channel */
- pci_write_config_byte(pdev, 0x62 + controller,
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
-
- /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
-
- /* FIXME: should these use address ? */
- /* Data read timing */
- pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
- /* Write command timing */
- pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
-}
-
-static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- printk(KERN_ERR "cs55x0: bad ide timing.\n");
-
- drive->pio_mode = XFER_PIO_0 + 0;
- cs5520_set_pio_mode(hwif, drive);
-}
-
-static const struct ide_port_ops cs5520_port_ops = {
- .set_pio_mode = cs5520_set_pio_mode,
- .set_dma_mode = cs5520_set_dma_mode,
-};
-
-static const struct ide_port_info cyrix_chipset = {
- .name = DRV_NAME,
- .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
- .port_ops = &cs5520_port_ops,
- .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
- .pio_mask = ATA_PIO4,
-};
-
-/*
- * The 5510/5520 are a bit weird. They don't quite set up the way
- * the PCI helper layer expects so we must do much of the set up
- * work longhand.
- */
-
-static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &cyrix_chipset;
- struct ide_hw hw[2], *hws[] = { NULL, NULL };
-
- ide_setup_pci_noise(dev, d);
-
- /* We must not grab the entire device, it has 'ISA' space in its
- * BARS too and we will freak out other bits of the kernel
- */
- if (pci_enable_device_io(dev)) {
- printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
- return -ENODEV;
- }
- pci_set_master(dev);
- if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING "%s: No suitable DMA available.\n",
- d->name);
- return -ENODEV;
- }
-
- /*
- * Now the chipset is configured we can let the core
- * do all the device setup for us
- */
-
- ide_pci_setup_ports(dev, d, &hw[0], &hws[0]);
- hw[0].irq = 14;
- hw[1].irq = 15;
-
- return ide_host_add(d, hws, 2, NULL);
-}
-
-static const struct pci_device_id cs5520_pci_tbl[] = {
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 },
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
-
-static struct pci_driver cs5520_pci_driver = {
- .name = "Cyrix_IDE",
- .id_table = cs5520_pci_tbl,
- .probe = cs5520_init_one,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5520_ide_init(void)
-{
- return ide_pci_register_driver(&cs5520_pci_driver);
-}
-
-module_init(cs5520_ide_init);
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
-MODULE_LICENSE("GPL");