summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-timings.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/ide-timings.c')
-rw-r--r--drivers/ide/ide-timings.c198
1 files changed, 0 insertions, 198 deletions
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c
deleted file mode 100644
index cfe78df74b7d..000000000000
--- a/drivers/ide/ide-timings.c
+++ /dev/null
@@ -1,198 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 1999-2001 Vojtech Pavlik
- * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
- */
-
-#include <linux/kernel.h>
-#include <linux/ide.h>
-#include <linux/module.h>
-
-/*
- * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
- * These were taken from ATA/ATAPI-6 standard, rev 0a, except
- * for PIO 5, which is a nonstandard extension and UDMA6, which
- * is currently supported only by Maxtor drives.
- */
-
-static struct ide_timing ide_timing[] = {
-
- { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 },
- { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 },
- { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 },
- { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 },
-
- { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 },
- { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 },
- { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
-
- { XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 80, 0 },
- { XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 100, 0 },
- { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
- { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
- { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
- { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
- { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
- { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
-
- { XFER_PIO_6, 10, 55, 20, 80, 55, 20, 80, 0 },
- { XFER_PIO_5, 15, 65, 25, 100, 65, 25, 100, 0 },
- { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 },
- { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 },
-
- { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 },
- { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 },
- { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 },
-
- { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 },
-
- { 0xff }
-};
-
-struct ide_timing *ide_timing_find_mode(u8 speed)
-{
- struct ide_timing *t;
-
- for (t = ide_timing; t->mode != speed; t++)
- if (t->mode == 0xff)
- return NULL;
- return t;
-}
-EXPORT_SYMBOL_GPL(ide_timing_find_mode);
-
-u16 ide_pio_cycle_time(ide_drive_t *drive, u8 pio)
-{
- u16 *id = drive->id;
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- u16 cycle = 0;
-
- if (id[ATA_ID_FIELD_VALID] & 2) {
- if (ata_id_has_iordy(drive->id))
- cycle = id[ATA_ID_EIDE_PIO_IORDY];
- else
- cycle = id[ATA_ID_EIDE_PIO];
-
- /* conservative "downgrade" for all pre-ATA2 drives */
- if (pio < 3 && cycle < t->cycle)
- cycle = 0; /* use standard timing */
-
- /* Use the standard timing for the CF specific modes too */
- if (pio > 4 && ata_id_is_cfa(id))
- cycle = 0;
- }
-
- return cycle ? cycle : t->cycle;
-}
-EXPORT_SYMBOL_GPL(ide_pio_cycle_time);
-
-#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1)
-#define EZ(v, unit) ((v) ? ENOUGH((v) * 1000, unit) : 0)
-
-static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q,
- int T, int UT)
-{
- q->setup = EZ(t->setup, T);
- q->act8b = EZ(t->act8b, T);
- q->rec8b = EZ(t->rec8b, T);
- q->cyc8b = EZ(t->cyc8b, T);
- q->active = EZ(t->active, T);
- q->recover = EZ(t->recover, T);
- q->cycle = EZ(t->cycle, T);
- q->udma = EZ(t->udma, UT);
-}
-
-void ide_timing_merge(struct ide_timing *a, struct ide_timing *b,
- struct ide_timing *m, unsigned int what)
-{
- if (what & IDE_TIMING_SETUP)
- m->setup = max(a->setup, b->setup);
- if (what & IDE_TIMING_ACT8B)
- m->act8b = max(a->act8b, b->act8b);
- if (what & IDE_TIMING_REC8B)
- m->rec8b = max(a->rec8b, b->rec8b);
- if (what & IDE_TIMING_CYC8B)
- m->cyc8b = max(a->cyc8b, b->cyc8b);
- if (what & IDE_TIMING_ACTIVE)
- m->active = max(a->active, b->active);
- if (what & IDE_TIMING_RECOVER)
- m->recover = max(a->recover, b->recover);
- if (what & IDE_TIMING_CYCLE)
- m->cycle = max(a->cycle, b->cycle);
- if (what & IDE_TIMING_UDMA)
- m->udma = max(a->udma, b->udma);
-}
-EXPORT_SYMBOL_GPL(ide_timing_merge);
-
-int ide_timing_compute(ide_drive_t *drive, u8 speed,
- struct ide_timing *t, int T, int UT)
-{
- u16 *id = drive->id;
- struct ide_timing *s, p;
-
- /*
- * Find the mode.
- */
- s = ide_timing_find_mode(speed);
- if (s == NULL)
- return -EINVAL;
-
- /*
- * Copy the timing from the table.
- */
- *t = *s;
-
- /*
- * If the drive is an EIDE drive, it can tell us it needs extended
- * PIO/MWDMA cycle timing.
- */
- if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
- memset(&p, 0, sizeof(p));
-
- if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
- if (speed <= XFER_PIO_2)
- p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
- else if ((speed <= XFER_PIO_4) ||
- (speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
- p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
- } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- p.cycle = id[ATA_ID_EIDE_DMA_MIN];
-
- ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
- }
-
- /*
- * Convert the timing to bus clock counts.
- */
- ide_timing_quantize(t, t, T, UT);
-
- /*
- * Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
- * S.M.A.R.T and some other commands. We have to ensure that the
- * DMA cycle timing is slower/equal than the current PIO timing.
- */
- if (speed >= XFER_SW_DMA_0) {
- ide_timing_compute(drive, drive->pio_mode, &p, T, UT);
- ide_timing_merge(&p, t, t, IDE_TIMING_ALL);
- }
-
- /*
- * Lengthen active & recovery time so that cycle time is correct.
- */
- if (t->act8b + t->rec8b < t->cyc8b) {
- t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
- t->rec8b = t->cyc8b - t->act8b;
- }
-
- if (t->active + t->recover < t->cycle) {
- t->active += (t->cycle - (t->active + t->recover)) / 2;
- t->recover = t->cycle - t->active;
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_timing_compute);