diff options
Diffstat (limited to 'drivers/ide/ide-xfer-mode.c')
| -rw-r--r-- | drivers/ide/ide-xfer-mode.c | 267 |
1 files changed, 0 insertions, 267 deletions
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c deleted file mode 100644 index 0b9709b489b7..000000000000 --- a/drivers/ide/ide-xfer-mode.c +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -#include <linux/types.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/export.h> -#include <linux/interrupt.h> -#include <linux/ide.h> -#include <linux/bitops.h> - -static const char *udma_str[] = - { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44", - "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" }; -static const char *mwdma_str[] = - { "MWDMA0", "MWDMA1", "MWDMA2", "MWDMA3", "MWDMA4" }; -static const char *swdma_str[] = - { "SWDMA0", "SWDMA1", "SWDMA2" }; -static const char *pio_str[] = - { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5", "PIO6" }; - -/** - * ide_xfer_verbose - return IDE mode names - * @mode: transfer mode - * - * Returns a constant string giving the name of the mode - * requested. - */ - -const char *ide_xfer_verbose(u8 mode) -{ - const char *s; - u8 i = mode & 0xf; - - if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7) - s = udma_str[i]; - else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_4) - s = mwdma_str[i]; - else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2) - s = swdma_str[i]; - else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_6) - s = pio_str[i & 0x7]; - else if (mode == XFER_PIO_SLOW) - s = "PIO SLOW"; - else - s = "XFER ERROR"; - - return s; -} -EXPORT_SYMBOL(ide_xfer_verbose); - -/** - * ide_get_best_pio_mode - get PIO mode from drive - * @drive: drive to consider - * @mode_wanted: preferred mode - * @max_mode: highest allowed mode - * - * This routine returns the recommended PIO settings for a given drive, - * based on the drive->id information and the ide_pio_blacklist[]. - * - * Drive PIO mode is auto-selected if 255 is passed as mode_wanted. - * This is used by most chipset support modules when "auto-tuning". - */ - -static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) -{ - u16 *id = drive->id; - int pio_mode = -1, overridden = 0; - - if (mode_wanted != 255) - return min_t(u8, mode_wanted, max_mode); - - if ((drive->hwif->host_flags & IDE_HFLAG_PIO_NO_BLACKLIST) == 0) - pio_mode = ide_scan_pio_blacklist((char *)&id[ATA_ID_PROD]); - - if (pio_mode != -1) { - printk(KERN_INFO "%s: is on PIO blacklist\n", drive->name); - } else { - pio_mode = id[ATA_ID_OLD_PIO_MODES] >> 8; - if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */ - pio_mode = 2; - overridden = 1; - } - - if (id[ATA_ID_FIELD_VALID] & 2) { /* ATA2? */ - if (ata_id_is_cfa(id) && (id[ATA_ID_CFA_MODES] & 7)) - pio_mode = 4 + min_t(int, 2, - id[ATA_ID_CFA_MODES] & 7); - else if (ata_id_has_iordy(id)) { - if (id[ATA_ID_PIO_MODES] & 7) { - overridden = 0; - if (id[ATA_ID_PIO_MODES] & 4) - pio_mode = 5; - else if (id[ATA_ID_PIO_MODES] & 2) - pio_mode = 4; - else - pio_mode = 3; - } - } - } - - if (overridden) - printk(KERN_INFO "%s: tPIO > 2, assuming tPIO = 2\n", - drive->name); - } - - if (pio_mode > max_mode) - pio_mode = max_mode; - - return pio_mode; -} - -int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio) -{ - /* - * IORDY may lead to controller lock up on certain controllers - * if the port is not occupied. - */ - if (pio == 0 && (drive->hwif->port_flags & IDE_PFLAG_PROBING)) - return 0; - return ata_id_pio_need_iordy(drive->id, pio); -} -EXPORT_SYMBOL_GPL(ide_pio_need_iordy); - -int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL) - return -1; - - /* - * TODO: temporary hack for some legacy host drivers that didn't - * set transfer mode on the device in ->set_pio_mode method... - */ - if (port_ops->set_dma_mode == NULL) { - drive->pio_mode = mode; - port_ops->set_pio_mode(hwif, drive); - return 0; - } - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - drive->pio_mode = mode; - port_ops->set_pio_mode(hwif, drive); - return 0; - } else { - drive->pio_mode = mode; - port_ops->set_pio_mode(hwif, drive); - return ide_config_drive_speed(drive, mode); - } -} - -int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE) - return 0; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL) - return -1; - - if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { - if (ide_config_drive_speed(drive, mode)) - return -1; - drive->dma_mode = mode; - port_ops->set_dma_mode(hwif, drive); - return 0; - } else { - drive->dma_mode = mode; - port_ops->set_dma_mode(hwif, drive); - return ide_config_drive_speed(drive, mode); - } -} -EXPORT_SYMBOL_GPL(ide_set_dma_mode); - -/* req_pio == "255" for auto-tune */ -void ide_set_pio(ide_drive_t *drive, u8 req_pio) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - u8 host_pio, pio; - - if (port_ops == NULL || port_ops->set_pio_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return; - - BUG_ON(hwif->pio_mask == 0x00); - - host_pio = fls(hwif->pio_mask) - 1; - - pio = ide_get_best_pio_mode(drive, req_pio, host_pio); - - /* - * TODO: - * - report device max PIO mode - * - check req_pio != 255 against device max PIO mode - */ - printk(KERN_DEBUG "%s: host max PIO%d wanted PIO%d%s selected PIO%d\n", - drive->name, host_pio, req_pio, - req_pio == 255 ? "(auto-tune)" : "", pio); - - (void)ide_set_pio_mode(drive, XFER_PIO_0 + pio); -} -EXPORT_SYMBOL_GPL(ide_set_pio); - -/** - * ide_rate_filter - filter transfer mode - * @drive: IDE device - * @speed: desired speed - * - * Given the available transfer modes this function returns - * the best available speed at or below the speed requested. - * - * TODO: check device PIO capabilities - */ - -static u8 ide_rate_filter(ide_drive_t *drive, u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mode = ide_find_dma_mode(drive, speed); - - if (mode == 0) { - if (hwif->pio_mask) - mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; - else - mode = XFER_PIO_4; - } - -/* printk("%s: mode 0x%02x, speed 0x%02x\n", __func__, mode, speed); */ - - return min(speed, mode); -} - -/** - * ide_set_xfer_rate - set transfer rate - * @drive: drive to set - * @rate: speed to attempt to set - * - * General helper for setting the speed of an IDE device. This - * function knows about user enforced limits from the configuration - * which ->set_pio_mode/->set_dma_mode does not. - */ - -int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) -{ - ide_hwif_t *hwif = drive->hwif; - const struct ide_port_ops *port_ops = hwif->port_ops; - - if (port_ops == NULL || port_ops->set_dma_mode == NULL || - (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)) - return -1; - - rate = ide_rate_filter(drive, rate); - - BUG_ON(rate < XFER_PIO_0); - - if (rate >= XFER_PIO_0 && rate <= XFER_PIO_6) - return ide_set_pio_mode(drive, rate); - - return ide_set_dma_mode(drive, rate); -} |