diff options
Diffstat (limited to 'drivers/ide/ppc')
-rw-r--r-- | drivers/ide/ppc/Makefile | 1 | ||||
-rw-r--r-- | drivers/ide/ppc/mpc8xx.c | 851 | ||||
-rw-r--r-- | drivers/ide/ppc/pmac.c | 243 |
3 files changed, 139 insertions, 956 deletions
diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile index 65af5848b28c..74e52adcdf4b 100644 --- a/drivers/ide/ppc/Makefile +++ b/drivers/ide/ppc/Makefile @@ -1,3 +1,2 @@ obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o -obj-$(CONFIG_BLK_DEV_MPC8xx_IDE) += mpc8xx.o diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c deleted file mode 100644 index 236f9c38e519..000000000000 --- a/drivers/ide/ppc/mpc8xx.c +++ /dev/null @@ -1,851 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Wolfgang Denk, wd@denx.de - * Modified for direct IDE interface - * by Thomas Lange, thomas@corelatus.com - * Modified for direct IDE interface on 8xx without using the PCMCIA - * controller - * by Steven.Scholz@imc-berlin.de - * Moved out of arch/ppc/kernel/m8xx_setup.c, other minor cleanups - * by Mathew Locke <mattl@mvista.com> - */ - -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/tty.h> -#include <linux/major.h> -#include <linux/interrupt.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/ide.h> -#include <linux/bootmem.h> - -#include <asm/mpc8xx.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/ide.h> -#include <asm/8xx_immap.h> -#include <asm/machdep.h> -#include <asm/irq.h> - -#define DRV_NAME "ide-mpc8xx" - -static int identify (volatile u8 *p); -static void print_fixed (volatile u8 *p); -static void print_funcid (int func); -static int check_ide_device (unsigned long base); - -static void ide_interrupt_ack (void *dev); -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio); - -typedef struct ide_ioport_desc { - unsigned long base_off; /* Offset to PCMCIA memory */ - unsigned long reg_off[IDE_NR_PORTS]; /* controller register offsets */ - int irq; /* IRQ */ -} ide_ioport_desc_t; - -ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = { -#ifdef IDE0_BASE_OFFSET - { IDE0_BASE_OFFSET, - { - IDE0_DATA_REG_OFFSET, - IDE0_ERROR_REG_OFFSET, - IDE0_NSECTOR_REG_OFFSET, - IDE0_SECTOR_REG_OFFSET, - IDE0_LCYL_REG_OFFSET, - IDE0_HCYL_REG_OFFSET, - IDE0_SELECT_REG_OFFSET, - IDE0_STATUS_REG_OFFSET, - IDE0_CONTROL_REG_OFFSET, - IDE0_IRQ_REG_OFFSET, - }, - IDE0_INTERRUPT, - }, -#ifdef IDE1_BASE_OFFSET - { IDE1_BASE_OFFSET, - { - IDE1_DATA_REG_OFFSET, - IDE1_ERROR_REG_OFFSET, - IDE1_NSECTOR_REG_OFFSET, - IDE1_SECTOR_REG_OFFSET, - IDE1_LCYL_REG_OFFSET, - IDE1_HCYL_REG_OFFSET, - IDE1_SELECT_REG_OFFSET, - IDE1_STATUS_REG_OFFSET, - IDE1_CONTROL_REG_OFFSET, - IDE1_IRQ_REG_OFFSET, - }, - IDE1_INTERRUPT, - }, -#endif /* IDE1_BASE_OFFSET */ -#endif /* IDE0_BASE_OFFSET */ -}; - -ide_pio_timings_t ide_pio_clocks[6]; -int hold_time[6] = {30, 20, 15, 10, 10, 10 }; /* PIO Mode 5 with IORDY (nonstandard) */ - -/* - * Warning: only 1 (ONE) PCMCIA slot supported here, - * which must be correctly initialized by the firmware (PPCBoot). - */ -static int _slot_ = -1; /* will be read from PCMCIA registers */ - -/* Make clock cycles and always round up */ -#define PCMCIA_MK_CLKS( t, T ) (( (t) * ((T)/1000000) + 999U ) / 1000U ) - -#define M8XX_PCMCIA_CD2(slot) (0x10000000 >> (slot << 4)) -#define M8XX_PCMCIA_CD1(slot) (0x08000000 >> (slot << 4)) - -/* - * The TQM850L hardware has two pins swapped! Grrrrgh! - */ -#ifdef CONFIG_TQM850L -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXOE -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXRESET -#else -#define __MY_PCMCIA_GCRX_CXRESET PCMCIA_GCRX_CXRESET -#define __MY_PCMCIA_GCRX_CXOE PCMCIA_GCRX_CXOE -#endif - -#if defined(CONFIG_BLK_DEV_MPC8xx_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define PCMCIA_SCHLVL IDE0_INTERRUPT /* Status Change Interrupt Level */ -static int pcmcia_schlvl = PCMCIA_SCHLVL; -#endif - -/* - * See include/linux/ide.h for definition of hw_regs_t (p, base) - */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _using_ - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - typedef struct { - ulong br; - ulong or; - } pcmcia_win_t; - volatile pcmcia_win_t *win; - volatile pcmconf8xx_t *pcmp; - - uint *pgcrx; - u32 pcmcia_phy_base; - u32 pcmcia_phy_end; - static unsigned long pcmcia_base = 0; - unsigned long base; - - *p = 0; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - if (!pcmcia_base) { - /* - * Read out PCMCIA registers. Since the reset values - * are undefined, we sure hope that they have been - * set up by firmware - */ - - /* Scan all registers for valid settings */ - pcmcia_phy_base = 0xFFFFFFFF; - pcmcia_phy_end = 0; - /* br0 is start of brX and orX regs */ - win = (pcmcia_win_t *) \ - (&(((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pbr0)); - for (i = 0; i < 8; i++) { - if (win->or & 1) { /* This bank is marked as valid */ - if (win->br < pcmcia_phy_base) { - pcmcia_phy_base = win->br; - } - if ((win->br + PCMCIA_MEM_SIZE) > pcmcia_phy_end) { - pcmcia_phy_end = win->br + PCMCIA_MEM_SIZE; - } - /* Check which slot that has been defined */ - _slot_ = (win->or >> 2) & 1; - - } /* Valid bank */ - win++; - } /* for */ - - printk ("PCMCIA slot %c: phys mem %08x...%08x (size %08x)\n", - 'A' + _slot_, - pcmcia_phy_base, pcmcia_phy_end, - pcmcia_phy_end - pcmcia_phy_base); - - if (!request_mem_region(pcmcia_phy_base, - pcmcia_phy_end - pcmcia_phy_base, - DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - pcmcia_base=(unsigned long)ioremap(pcmcia_phy_base, - pcmcia_phy_end-pcmcia_phy_base); - -#ifdef DEBUG - printk ("PCMCIA virt base: %08lx\n", pcmcia_base); -#endif - /* Compute clock cycles for PIO timings */ - for (i=0; i<6; ++i) { - bd_t *binfo = (bd_t *)__res; - - hold_time[i] = - PCMCIA_MK_CLKS (hold_time[i], - binfo->bi_busfreq); - ide_pio_clocks[i].setup_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time, - binfo->bi_busfreq); - ide_pio_clocks[i].active_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].active_time, - binfo->bi_busfreq); - ide_pio_clocks[i].cycle_time = - PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time, - binfo->bi_busfreq); -#if 0 - printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n", - i, - ide_pio_clocks[i].setup_time, - ide_pio_clocks[i].active_time, - ide_pio_clocks[i].hold_time, - ide_pio_clocks[i].cycle_time, - ide_pio_timings[i].setup_time, - ide_pio_timings[i].active_time, - ide_pio_timings[i].hold_time, - ide_pio_timings[i].cycle_time); -#endif - } - } - - if (_slot_ == -1) { - printk ("PCMCIA slot has not been defined! Using A as default\n"); - _slot_ = 0; - } - -#ifdef CONFIG_IDE_8xx_PCCARD - -#ifdef DEBUG - printk ("PIPR = 0x%08X slot %c ==> mask = 0x%X\n", - pcmp->pcmc_pipr, - 'A' + _slot_, - M8XX_PCMCIA_CD1(_slot_) | M8XX_PCMCIA_CD2(_slot_) ); -#endif /* DEBUG */ - - if (pcmp->pcmc_pipr & (M8XX_PCMCIA_CD1(_slot_)|M8XX_PCMCIA_CD2(_slot_))) { - printk ("No card in slot %c: PIPR=%08x\n", - 'A' + _slot_, (u32) pcmp->pcmc_pipr); - return -ENODEV; /* No card in slot */ - } - - check_ide_device (pcmcia_base); - -#endif /* CONFIG_IDE_8xx_PCCARD */ - - base = pcmcia_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - pcmcia_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - -#ifdef CONFIG_IDE_8xx_PCCARD - { - unsigned int reg; - - if (_slot_) - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcrb; - else - pgcrx = &((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pgcra; - - reg = *pgcrx; - reg |= mk_int_int_mask (pcmcia_schlvl) << 24; - reg |= mk_int_int_mask (pcmcia_schlvl) << 16; - *pgcrx = reg; - } -#endif /* CONFIG_IDE_8xx_PCCARD */ - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - -#ifdef CONFIG_IDE_8xx_PCCARD - /* Make sure we don't get garbage irq */ - ((immap_t *) IMAP_ADDR)->im_pcmcia.pcmc_pscr = 0xFFFF; - - /* Enable falling edge irq */ - pcmp->pcmc_per = 0x100000 >> (16 * _slot_); -#endif /* CONFIG_IDE_8xx_PCCARD */ - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ - -/* - * m8xx_ide_init_ports() for a direct IDE interface _not_ using - * MPC8xx's internal PCMCIA interface - */ -#if defined(CONFIG_IDE_EXT_DIRECT) -static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) -{ - unsigned long *p = hw->io_ports_array; - int i; - - u32 ide_phy_base; - u32 ide_phy_end; - static unsigned long ide_base = 0; - unsigned long base; - - *p = 0; - - if (!ide_base) { - - /* TODO: - * - add code to read ORx, BRx - */ - ide_phy_base = CFG_ATA_BASE_ADDR; - ide_phy_end = CFG_ATA_BASE_ADDR + 0x200; - - printk ("IDE phys mem : %08x...%08x (size %08x)\n", - ide_phy_base, ide_phy_end, - ide_phy_end - ide_phy_base); - - if (!request_mem_region(ide_phy_base, 0x200, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - ide_base=(unsigned long)ioremap(ide_phy_base, - ide_phy_end-ide_phy_base); - -#ifdef DEBUG - printk ("IDE virt base: %08lx\n", ide_base); -#endif - } - - base = ide_base + ioport_dsc[data_port].base_off; -#ifdef DEBUG - printk ("base: %08x + %08x = %08x\n", - ide_base, ioport_dsc[data_port].base_off, base); -#endif - - for (i = 0; i < IDE_NR_PORTS; ++i) { -#ifdef DEBUG - printk ("port[%d]: %08x + %08x = %08x\n", - i, - base, - ioport_dsc[data_port].reg_off[i], - i, base + ioport_dsc[data_port].reg_off[i]); -#endif - *p++ = base + ioport_dsc[data_port].reg_off[i]; - } - - /* direct connected IDE drive, i.e. external IRQ */ - hw->irq = ioport_dsc[data_port].irq; - hw->ack_intr = (ide_ack_intr_t *)ide_interrupt_ack; - - /* Enable Harddisk Interrupt, - * and make it edge sensitive - */ - /* (11-18) Set edge detect for irq, no wakeup from low power mode */ - ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= - (0x80000000 >> ioport_dsc[data_port].irq); - - hw->chipset = ide_generic; - - return 0; -} -#endif /* CONFIG_IDE_8xx_DIRECT */ - - -/* -------------------------------------------------------------------- */ - - -/* PCMCIA Timing */ -#ifndef PCMCIA_SHT -#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */ -#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */ -#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */ -#endif - -/* Calculate PIO timings */ -static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ -#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) - volatile pcmconf8xx_t *pcmp; - ulong timing, mask, reg; - - pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia)); - - mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF)); - - timing = PCMCIA_SHT(hold_time[pio] ) - | PCMCIA_SST(ide_pio_clocks[pio].setup_time ) - | PCMCIA_SL (ide_pio_clocks[pio].active_time) - ; - -#if 1 - printk ("Setting timing bits 0x%08lx in PCMCIA controller\n", timing); -#endif - if ((reg = pcmp->pcmc_por0 & mask) != 0) - pcmp->pcmc_por0 = reg | timing; - - if ((reg = pcmp->pcmc_por1 & mask) != 0) - pcmp->pcmc_por1 = reg | timing; - - if ((reg = pcmp->pcmc_por2 & mask) != 0) - pcmp->pcmc_por2 = reg | timing; - - if ((reg = pcmp->pcmc_por3 & mask) != 0) - pcmp->pcmc_por3 = reg | timing; - - if ((reg = pcmp->pcmc_por4 & mask) != 0) - pcmp->pcmc_por4 = reg | timing; - - if ((reg = pcmp->pcmc_por5 & mask) != 0) - pcmp->pcmc_por5 = reg | timing; - - if ((reg = pcmp->pcmc_por6 & mask) != 0) - pcmp->pcmc_por6 = reg | timing; - - if ((reg = pcmp->pcmc_por7 & mask) != 0) - pcmp->pcmc_por7 = reg | timing; - -#elif defined(CONFIG_IDE_EXT_DIRECT) - - printk("%s[%d] %s: not implemented yet!\n", - __FILE__, __LINE__, __func__); -#endif /* defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_PCMCIA */ -} - -static const struct ide_port_ops m8xx_port_ops = { - .set_pio_mode = m8xx_ide_set_pio_mode, -}; - -static void -ide_interrupt_ack (void *dev) -{ -#ifdef CONFIG_IDE_8xx_PCCARD - u_int pscr, pipr; - -#if (PCMCIA_SOCKETS_NO == 2) - u_int _slot_; -#endif - - /* get interrupt sources */ - - pscr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr; - pipr = ((volatile immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pipr; - - /* - * report only if both card detect signals are the same - * not too nice done, - * we depend on that CD2 is the bit to the left of CD1... - */ - - if(_slot_==-1){ - printk("PCMCIA slot has not been defined! Using A as default\n"); - _slot_=0; - } - - if(((pipr & M8XX_PCMCIA_CD2(_slot_)) >> 1) ^ - (pipr & M8XX_PCMCIA_CD1(_slot_)) ) { - printk ("card detect interrupt\n"); - } - /* clear the interrupt sources */ - ((immap_t *)IMAP_ADDR)->im_pcmcia.pcmc_pscr = pscr; - -#else /* ! CONFIG_IDE_8xx_PCCARD */ - /* - * Only CONFIG_IDE_8xx_PCCARD is using the interrupt of the - * MPC8xx's PCMCIA controller, so there is nothing to be done here - * for CONFIG_IDE_8xx_DIRECT and CONFIG_IDE_EXT_DIRECT. - * The interrupt is handled somewhere else. -- Steven - */ -#endif /* CONFIG_IDE_8xx_PCCARD */ -} - - - -/* - * CIS Tupel codes - */ -#define CISTPL_NULL 0x00 -#define CISTPL_DEVICE 0x01 -#define CISTPL_LONGLINK_CB 0x02 -#define CISTPL_INDIRECT 0x03 -#define CISTPL_CONFIG_CB 0x04 -#define CISTPL_CFTABLE_ENTRY_CB 0x05 -#define CISTPL_LONGLINK_MFC 0x06 -#define CISTPL_BAR 0x07 -#define CISTPL_PWR_MGMNT 0x08 -#define CISTPL_EXTDEVICE 0x09 -#define CISTPL_CHECKSUM 0x10 -#define CISTPL_LONGLINK_A 0x11 -#define CISTPL_LONGLINK_C 0x12 -#define CISTPL_LINKTARGET 0x13 -#define CISTPL_NO_LINK 0x14 -#define CISTPL_VERS_1 0x15 -#define CISTPL_ALTSTR 0x16 -#define CISTPL_DEVICE_A 0x17 -#define CISTPL_JEDEC_C 0x18 -#define CISTPL_JEDEC_A 0x19 -#define CISTPL_CONFIG 0x1a -#define CISTPL_CFTABLE_ENTRY 0x1b -#define CISTPL_DEVICE_OC 0x1c -#define CISTPL_DEVICE_OA 0x1d -#define CISTPL_DEVICE_GEO 0x1e -#define CISTPL_DEVICE_GEO_A 0x1f -#define CISTPL_MANFID 0x20 -#define CISTPL_FUNCID 0x21 -#define CISTPL_FUNCE 0x22 -#define CISTPL_SWIL 0x23 -#define CISTPL_END 0xff - -/* - * CIS Function ID codes - */ -#define CISTPL_FUNCID_MULTI 0x00 -#define CISTPL_FUNCID_MEMORY 0x01 -#define CISTPL_FUNCID_SERIAL 0x02 -#define CISTPL_FUNCID_PARALLEL 0x03 -#define CISTPL_FUNCID_FIXED 0x04 -#define CISTPL_FUNCID_VIDEO 0x05 -#define CISTPL_FUNCID_NETWORK 0x06 -#define CISTPL_FUNCID_AIMS 0x07 -#define CISTPL_FUNCID_SCSI 0x08 - -/* - * Fixed Disk FUNCE codes - */ -#define CISTPL_IDE_INTERFACE 0x01 - -#define CISTPL_FUNCE_IDE_IFACE 0x01 -#define CISTPL_FUNCE_IDE_MASTER 0x02 -#define CISTPL_FUNCE_IDE_SLAVE 0x03 - -/* First feature byte */ -#define CISTPL_IDE_SILICON 0x04 -#define CISTPL_IDE_UNIQUE 0x08 -#define CISTPL_IDE_DUAL 0x10 - -/* Second feature byte */ -#define CISTPL_IDE_HAS_SLEEP 0x01 -#define CISTPL_IDE_HAS_STANDBY 0x02 -#define CISTPL_IDE_HAS_IDLE 0x04 -#define CISTPL_IDE_LOW_POWER 0x08 -#define CISTPL_IDE_REG_INHIBIT 0x10 -#define CISTPL_IDE_HAS_INDEX 0x20 -#define CISTPL_IDE_IOIS16 0x40 - - -/* -------------------------------------------------------------------- */ - - -#define MAX_TUPEL_SZ 512 -#define MAX_FEATURES 4 - -static int check_ide_device (unsigned long base) -{ - volatile u8 *ident = NULL; - volatile u8 *feature_p[MAX_FEATURES]; - volatile u8 *p, *start; - int n_features = 0; - u8 func_id = ~0; - u8 code, len; - unsigned short config_base = 0; - int found = 0; - int i; - -#ifdef DEBUG - printk ("PCMCIA MEM: %08lX\n", base); -#endif - start = p = (volatile u8 *) base; - - while ((p - start) < MAX_TUPEL_SZ) { - - code = *p; p += 2; - - if (code == 0xFF) { /* End of chain */ - break; - } - - len = *p; p += 2; -#ifdef DEBUG_PCMCIA - { volatile u8 *q = p; - printk ("\nTuple code %02x length %d\n\tData:", - code, len); - - for (i = 0; i < len; ++i) { - printk (" %02x", *q); - q+= 2; - } - } -#endif /* DEBUG_PCMCIA */ - switch (code) { - case CISTPL_VERS_1: - ident = p + 4; - break; - case CISTPL_FUNCID: - func_id = *p; - break; - case CISTPL_FUNCE: - if (n_features < MAX_FEATURES) - feature_p[n_features++] = p; - break; - case CISTPL_CONFIG: - config_base = (*(p+6) << 8) + (*(p+4)); - default: - break; - } - p += 2 * len; - } - - found = identify (ident); - - if (func_id != ((u8)~0)) { - print_funcid (func_id); - - if (func_id == CISTPL_FUNCID_FIXED) - found = 1; - else - return (1); /* no disk drive */ - } - - for (i=0; i<n_features; ++i) { - print_fixed (feature_p[i]); - } - - if (!found) { - printk ("unknown card type\n"); - return (1); - } - - /* set level mode irq and I/O mapped device in config reg*/ - *((u8 *)(base + config_base)) = 0x41; - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -static void print_funcid (int func) -{ - switch (func) { - case CISTPL_FUNCID_MULTI: - printk (" Multi-Function"); - break; - case CISTPL_FUNCID_MEMORY: - printk (" Memory"); - break; - case CISTPL_FUNCID_SERIAL: - printk (" Serial Port"); - break; - case CISTPL_FUNCID_PARALLEL: - printk (" Parallel Port"); - break; - case CISTPL_FUNCID_FIXED: - printk (" Fixed Disk"); - break; - case CISTPL_FUNCID_VIDEO: - printk (" Video Adapter"); - break; - case CISTPL_FUNCID_NETWORK: - printk (" Network Adapter"); - break; - case CISTPL_FUNCID_AIMS: - printk (" AIMS Card"); - break; - case CISTPL_FUNCID_SCSI: - printk (" SCSI Adapter"); - break; - default: - printk (" Unknown"); - break; - } - printk (" Card\n"); -} - -/* ------------------------------------------------------------------------- */ - -static void print_fixed (volatile u8 *p) -{ - if (p == NULL) - return; - - switch (*p) { - case CISTPL_FUNCE_IDE_IFACE: - { u8 iface = *(p+2); - - printk ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown"); - printk (" interface "); - break; - } - case CISTPL_FUNCE_IDE_MASTER: - case CISTPL_FUNCE_IDE_SLAVE: - { u8 f1 = *(p+2); - u8 f2 = *(p+4); - - printk ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]"); - - if (f1 & CISTPL_IDE_UNIQUE) - printk (" [unique]"); - - printk ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]"); - - if (f2 & CISTPL_IDE_HAS_SLEEP) - printk (" [sleep]"); - - if (f2 & CISTPL_IDE_HAS_STANDBY) - printk (" [standby]"); - - if (f2 & CISTPL_IDE_HAS_IDLE) - printk (" [idle]"); - - if (f2 & CISTPL_IDE_LOW_POWER) - printk (" [low power]"); - - if (f2 & CISTPL_IDE_REG_INHIBIT) - printk (" [reg inhibit]"); - - if (f2 & CISTPL_IDE_HAS_INDEX) - printk (" [index]"); - - if (f2 & CISTPL_IDE_IOIS16) - printk (" [IOis16]"); - - break; - } - } - printk ("\n"); -} - -/* ------------------------------------------------------------------------- */ - - -#define MAX_IDENT_CHARS 64 -#define MAX_IDENT_FIELDS 4 - -static u8 *known_cards[] = { - "ARGOSY PnPIDE D5", - NULL -}; - -static int identify (volatile u8 *p) -{ - u8 id_str[MAX_IDENT_CHARS]; - u8 data; - u8 *t; - u8 **card; - int i, done; - - if (p == NULL) - return (0); /* Don't know */ - - t = id_str; - done =0; - - for (i=0; i<=4 && !done; ++i, p+=2) { - while ((data = *p) != '\0') { - if (data == 0xFF) { - done = 1; - break; - } - *t++ = data; - if (t == &id_str[MAX_IDENT_CHARS-1]) { - done = 1; - break; - } - p += 2; - } - if (!done) - *t++ = ' '; - } - *t = '\0'; - while (--t > id_str) { - if (*t == ' ') - *t = '\0'; - else - break; - } - printk ("Card ID: %s\n", id_str); - - for (card=known_cards; *card; ++card) { - if (strcmp(*card, id_str) == 0) { /* found! */ - return (1); - } - } - - return (0); /* don't know */ -} - -static int __init mpc8xx_ide_probe(void) -{ - hw_regs_t hw; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - -#ifdef IDE0_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 0)) { - ide_hwif_t *hwif = ide_find_port(); - - if (hwif) { - ide_init_port_hw(hwif, &hw); - hwif->pio_mask = ATA_PIO4; - hwif->port_ops = &m8xx_port_ops; - - idx[0] = hwif->index; - } - } -#ifdef IDE1_BASE_OFFSET - memset(&hw, 0, sizeof(hw)); - if (!m8xx_ide_init_ports(&hw, 1)) { - ide_hwif_t *mate = ide_find_port(); - - if (mate) { - ide_init_port_hw(mate, &hw); - mate->pio_mask = ATA_PIO4; - mate->port_ops = &m8xx_port_ops; - - idx[1] = mate->index; - } - } -#endif -#endif - - ide_device_add(idx, NULL); - - return 0; -} - -module_init(mpc8xx_ide_probe); - -MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index ba2d58727964..c521bf6e1bf2 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -5,7 +5,7 @@ * for doing DMA. * * Copyright (C) 1998-2003 Paul Mackerras & Ben. Herrenschmidt - * Copyright (C) 2007 Bartlomiej Zolnierkiewicz + * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -48,7 +48,7 @@ #include <asm/mediabay.h> #endif -#include "../ide-timing.h" +#define DRV_NAME "ide-pmac" #undef IDE_PMAC_DEBUG @@ -426,7 +426,9 @@ static void pmac_ide_kauai_selectproc(ide_drive_t *drive); static void pmac_ide_selectproc(ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); if (pmif == NULL) return; @@ -446,7 +448,9 @@ pmac_ide_selectproc(ide_drive_t *drive) static void pmac_ide_kauai_selectproc(ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); if (pmif == NULL) return; @@ -467,7 +471,9 @@ pmac_ide_kauai_selectproc(ide_drive_t *drive) static void pmac_ide_do_update_timings(ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); if (pmif == NULL) return; @@ -480,13 +486,27 @@ pmac_ide_do_update_timings(ide_drive_t *drive) pmac_ide_selectproc(drive); } -static void -pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port) +static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd) { - u32 tmp; - - writeb(value, (void __iomem *) port); - tmp = readl(PMAC_IDE_REG(IDE_TIMING_CONFIG)); + writeb(cmd, (void __iomem *)hwif->io_ports.command_addr); + (void)readl((void __iomem *)(hwif->io_ports.data_addr + + IDE_TIMING_CONFIG)); +} + +static void pmac_set_irq(ide_hwif_t *hwif, int on) +{ + u8 ctl = ATA_DEVCTL_OBS; + + if (on == 4) { /* hack for SRST */ + ctl |= 4; + on &= ~4; + } + + ctl |= on ? 0 : 2; + + writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr); + (void)readl((void __iomem *)(hwif->io_ports.data_addr + + IDE_TIMING_CONFIG)); } /* @@ -495,10 +515,13 @@ pmac_outbsync(ide_drive_t *drive, u8 value, unsigned long port) static void pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) { + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); u32 *timings, t; unsigned accessTicks, recTicks; unsigned accessTime, recTime; - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; unsigned int cycle_time; if (pmif == NULL) @@ -526,10 +549,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) } case controller_kl_ata4: /* 66Mhz cell */ - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS_66(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -542,10 +564,9 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) default: { /* 33Mhz cell */ int ebit = 0; - recTime = cycle_time - ide_pio_timings[pio].active_time - - ide_pio_timings[pio].setup_time; + recTime = cycle_time - tim->active - tim->setup; recTime = max(recTime, 150U); - accessTime = ide_pio_timings[pio].active_time; + accessTime = tim->active; accessTime = max(accessTime, 150U); accessTicks = SYSCLK_TICKS(accessTime); accessTicks = min(accessTicks, 0x1fU); @@ -781,9 +802,11 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) { + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); int unit = (drive->select.b.unit & 0x01); int ret = 0; - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; u32 *timings, *timings2, tl[2]; timings = &pmif->timings[unit]; @@ -855,11 +878,8 @@ sanitize_timings(pmac_ide_hwif_t *pmif) /* Suspend call back, should be called after the child devices * have actually been suspended */ -static int -pmac_ide_do_suspend(ide_hwif_t *hwif) +static int pmac_ide_do_suspend(pmac_ide_hwif_t *pmif) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data; - /* We clear the timings */ pmif->timings[0] = 0; pmif->timings[1] = 0; @@ -887,11 +907,8 @@ pmac_ide_do_suspend(ide_hwif_t *hwif) /* Resume call back, should be called before the child devices * are resumed */ -static int -pmac_ide_do_resume(ide_hwif_t *hwif) +static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data; - /* Hard reset & re-enable controller (do we really need to reset ? -BenH) */ if (!pmif->mediabay) { ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1); @@ -919,7 +936,8 @@ pmac_ide_do_resume(ide_hwif_t *hwif) static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif); + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); struct device_node *np = pmif->node; const char *cable = of_get_property(np, "cable-type", NULL); @@ -939,7 +957,40 @@ static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) return ATA_CBL_PATA40; } +static void pmac_ide_init_dev(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); + + if (pmif->mediabay) { +#ifdef CONFIG_PMAC_MEDIABAY + if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) { + drive->noprobe = 0; + return; + } +#endif + drive->noprobe = 1; + } +} + +static const struct ide_tp_ops pmac_tp_ops = { + .exec_command = pmac_exec_command, + .read_status = ide_read_status, + .read_altstatus = ide_read_altstatus, + .read_sff_dma_status = ide_read_sff_dma_status, + + .set_irq = pmac_set_irq, + + .tf_load = ide_tf_load, + .tf_read = ide_tf_read, + + .input_data = ide_input_data, + .output_data = ide_output_data, +}; + static const struct ide_port_ops pmac_ide_ata6_port_ops = { + .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_kauai_selectproc, @@ -947,6 +998,7 @@ static const struct ide_port_ops pmac_ide_ata6_port_ops = { }; static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_selectproc, @@ -954,6 +1006,7 @@ static const struct ide_port_ops pmac_ide_ata4_port_ops = { }; static const struct ide_port_ops pmac_ide_port_ops = { + .init_dev = pmac_ide_init_dev, .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_selectproc, @@ -962,12 +1015,14 @@ static const struct ide_port_ops pmac_ide_port_ops = { static const struct ide_dma_ops pmac_dma_ops; static const struct ide_port_info pmac_port_info = { + .name = DRV_NAME, .init_dma = pmac_ide_init_dma, .chipset = ide_pmac, + .tp_ops = &pmac_tp_ops, + .port_ops = &pmac_ide_port_ops, #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC .dma_ops = &pmac_dma_ops, #endif - .port_ops = &pmac_ide_port_ops, .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_MMIO | @@ -980,13 +1035,15 @@ static const struct ide_port_info pmac_port_info = { * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). */ -static int __devinit -pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) +static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw) { struct device_node *np = pmif->node; const int *bidp; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_host *host; + ide_hwif_t *hwif; + hw_regs_t *hws[] = { hw, NULL, NULL, NULL }; struct ide_port_info d = pmac_port_info; + int rc; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { @@ -1057,31 +1114,16 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) msleep(jiffies_to_msecs(IDE_WAKEUP_DELAY)); } - /* Setup MMIO ops */ - default_hwif_mmiops(hwif); - hwif->OUTBSYNC = pmac_outbsync; + printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), " + "bus ID %d%s, irq %d\n", model_name[pmif->kind], + pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id, + pmif->mediabay ? " (mediabay)" : "", hw->irq); - hwif->hwif_data = pmif; - ide_init_port_hw(hwif, hw); + rc = ide_host_add(&d, hws, &host); + if (rc) + return rc; - printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", - hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, - pmif->mediabay ? " (mediabay)" : "", hwif->irq); - - if (pmif->mediabay) { -#ifdef CONFIG_PMAC_MEDIABAY - if (check_media_bay_by_base(pmif->regbase, MB_CD)) { -#else - if (1) { -#endif - hwif->drives[0].noprobe = 1; - hwif->drives[1].noprobe = 1; - } - } - - idx[0] = hwif->index; - - ide_device_add(idx, &d); + hwif = host->ports[0]; return 0; } @@ -1104,7 +1146,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) { void __iomem *base; unsigned long regbase; - ide_hwif_t *hwif; pmac_ide_hwif_t *pmif; int irq, rc; hw_regs_t hw; @@ -1113,14 +1154,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) if (pmif == NULL) return -ENOMEM; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-pmac: MacIO interface attach with no slot\n"); - printk(KERN_ERR " %s\n", mdev->ofdev.node->full_name); - rc = -ENODEV; - goto out_free_pmif; - } - if (macio_resource_count(mdev) == 0) { printk(KERN_WARNING "ide-pmac: no address for %s\n", mdev->ofdev.node->full_name); @@ -1151,8 +1184,6 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) base = ioremap(macio_resource_start(mdev, 0), 0x400); regbase = (unsigned long) base; - hwif->dev = &mdev->bus->pdev->dev; - pmif->mdev = mdev; pmif->node = mdev->ofdev.node; pmif->regbase = regbase; @@ -1169,14 +1200,15 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) } else pmif->dma_regs = NULL; #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - dev_set_drvdata(&mdev->ofdev.dev, hwif); + dev_set_drvdata(&mdev->ofdev.dev, pmif); memset(&hw, 0, sizeof(hw)); pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = irq; - hw.dev = &mdev->ofdev.dev; + hw.dev = &mdev->bus->pdev->dev; + hw.parent = &mdev->ofdev.dev; - rc = pmac_ide_setup_device(pmif, hwif, &hw); + rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ dev_set_drvdata(&mdev->ofdev.dev, NULL); @@ -1199,12 +1231,13 @@ out_free_pmif: static int pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) { - ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); - int rc = 0; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + int rc = 0; if (mesg.event != mdev->ofdev.dev.power.power_state.event && (mesg.event & PM_EVENT_SLEEP)) { - rc = pmac_ide_do_suspend(hwif); + rc = pmac_ide_do_suspend(pmif); if (rc == 0) mdev->ofdev.dev.power.power_state = mesg; } @@ -1215,11 +1248,12 @@ pmac_ide_macio_suspend(struct macio_dev *mdev, pm_message_t mesg) static int pmac_ide_macio_resume(struct macio_dev *mdev) { - ide_hwif_t *hwif = (ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); - int rc = 0; - + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev); + int rc = 0; + if (mdev->ofdev.dev.power.power_state.event != PM_EVENT_ON) { - rc = pmac_ide_do_resume(hwif); + rc = pmac_ide_do_resume(pmif); if (rc == 0) mdev->ofdev.dev.power.power_state = PMSG_ON; } @@ -1233,7 +1267,6 @@ pmac_ide_macio_resume(struct macio_dev *mdev) static int __devinit pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) { - ide_hwif_t *hwif; struct device_node *np; pmac_ide_hwif_t *pmif; void __iomem *base; @@ -1251,14 +1284,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) if (pmif == NULL) return -ENOMEM; - hwif = ide_find_port(); - if (hwif == NULL) { - printk(KERN_ERR "ide-pmac: PCI interface attach with no slot\n"); - printk(KERN_ERR " %s\n", np->full_name); - rc = -ENODEV; - goto out_free_pmif; - } - if (pci_enable_device(pdev)) { printk(KERN_WARNING "ide-pmac: Can't enable PCI device for " "%s\n", np->full_name); @@ -1274,7 +1299,6 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) goto out_free_pmif; } - hwif->dev = &pdev->dev; pmif->mdev = NULL; pmif->node = np; @@ -1289,14 +1313,14 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) pmif->kauai_fcr = base; pmif->irq = pdev->irq; - pci_set_drvdata(pdev, hwif); + pci_set_drvdata(pdev, pmif); memset(&hw, 0, sizeof(hw)); pmac_ide_init_ports(&hw, pmif->regbase); hw.irq = pdev->irq; hw.dev = &pdev->dev; - rc = pmac_ide_setup_device(pmif, hwif, &hw); + rc = pmac_ide_setup_device(pmif, &hw); if (rc != 0) { /* The inteface is released to the common IDE layer */ pci_set_drvdata(pdev, NULL); @@ -1315,12 +1339,12 @@ out_free_pmif: static int pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) { - ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev); - int rc = 0; - + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + int rc = 0; + if (mesg.event != pdev->dev.power.power_state.event && (mesg.event & PM_EVENT_SLEEP)) { - rc = pmac_ide_do_suspend(hwif); + rc = pmac_ide_do_suspend(pmif); if (rc == 0) pdev->dev.power.power_state = mesg; } @@ -1331,11 +1355,11 @@ pmac_ide_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) static int pmac_ide_pci_resume(struct pci_dev *pdev) { - ide_hwif_t *hwif = (ide_hwif_t *)pci_get_drvdata(pdev); - int rc = 0; - + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)pci_get_drvdata(pdev); + int rc = 0; + if (pdev->dev.power.power_state.event != PM_EVENT_ON) { - rc = pmac_ide_do_resume(hwif); + rc = pmac_ide_do_resume(pmif); if (rc == 0) pdev->dev.power.power_state = PMSG_ON; } @@ -1426,10 +1450,11 @@ out: static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq) { + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); struct dbdma_cmd *table; int i, count = 0; - ide_hwif_t *hwif = HWIF(drive); - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data; volatile struct dbdma_regs __iomem *dma = pmif->dma_regs; struct scatterlist *sg; int wr = (rq_data_dir(rq) == WRITE); @@ -1525,7 +1550,8 @@ static int pmac_ide_dma_setup(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)hwif->hwif_data; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); struct request *rq = HWGROUP(drive)->rq; u8 unit = (drive->select.b.unit & 0x01); u8 ata4; @@ -1565,7 +1591,9 @@ pmac_ide_dma_exec_cmd(ide_drive_t *drive, u8 command) static void pmac_ide_dma_start(ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; dma = pmif->dma_regs; @@ -1581,7 +1609,9 @@ pmac_ide_dma_start(ide_drive_t *drive) static int pmac_ide_dma_end (ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; u32 dstat; @@ -1609,7 +1639,9 @@ pmac_ide_dma_end (ide_drive_t *drive) static int pmac_ide_dma_test_irq (ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; unsigned long status, timeout; @@ -1669,7 +1701,9 @@ static void pmac_ide_dma_host_set(ide_drive_t *drive, int on) static void pmac_ide_dma_lost_irq (ide_drive_t *drive) { - pmac_ide_hwif_t* pmif = (pmac_ide_hwif_t *)HWIF(drive)->hwif_data; + ide_hwif_t *hwif = drive->hwif; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); volatile struct dbdma_regs __iomem *dma; unsigned long status; @@ -1699,7 +1733,8 @@ static const struct ide_dma_ops pmac_dma_ops = { static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { - pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)hwif->hwif_data; + pmac_ide_hwif_t *pmif = + (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); struct pci_dev *dev = to_pci_dev(hwif->dev); /* We won't need pci_dev if we switch to generic consistent |