summaryrefslogtreecommitdiff
path: root/drivers/ide/via82cxxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/via82cxxx.c')
-rw-r--r--drivers/ide/via82cxxx.c532
1 files changed, 0 insertions, 532 deletions
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
deleted file mode 100644
index 63a3aca506fc..000000000000
--- a/drivers/ide/via82cxxx.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * VIA IDE driver for Linux. Supported southbridges:
- *
- * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
- * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
- * vt8235, vt8237, vt8237a
- *
- * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
- *
- * Based on the work of:
- * Michel Aubry
- * Jeff Garzik
- * Andre Hedrick
- *
- * Documentation:
- * Obsolete device documentation publicly available from via.com.tw
- * Current device documentation available under NDA only
- */
-
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/dmi.h>
-
-#ifdef CONFIG_PPC_CHRP
-#include <asm/processor.h>
-#endif
-
-#define DRV_NAME "via82cxxx"
-
-#define VIA_IDE_ENABLE 0x40
-#define VIA_IDE_CONFIG 0x41
-#define VIA_FIFO_CONFIG 0x43
-#define VIA_MISC_1 0x44
-#define VIA_MISC_2 0x45
-#define VIA_MISC_3 0x46
-#define VIA_DRIVE_TIMING 0x48
-#define VIA_8BIT_TIMING 0x4e
-#define VIA_ADDRESS_SETUP 0x4c
-#define VIA_UDMA_TIMING 0x50
-
-#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */
-#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */
-#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */
-#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
-#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
-#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
-#define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */
-
-enum {
- VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
-};
-
-/*
- * VIA SouthBridge chips.
- */
-
-static struct via_isa_bridge {
- char *name;
- u16 id;
- u8 rev_min;
- u8 rev_max;
- u8 udma_mask;
- u8 flags;
-} via_isa_bridges[] = {
- { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
- { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
- { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
- { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
- { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
- { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
- { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
- { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
- { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
- { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
- { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
- { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
- { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { NULL }
-};
-
-static unsigned int via_clock;
-static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
-
-struct via82cxxx_dev
-{
- struct via_isa_bridge *via_config;
- unsigned int via_80w;
-};
-
-/**
- * via_set_speed - write timing registers
- * @dev: PCI device
- * @dn: device
- * @timing: IDE timing data to use
- *
- * via_set_speed writes timing values to the chipset registers
- */
-
-static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- u8 t;
-
- if (~vdev->via_config->flags & VIA_BAD_AST) {
- pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
- }
-
- pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
- ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
-
- pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
- ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
- case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
- case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
- }
-
- /* Set UDMA unless device is not UDMA capable */
- if (vdev->via_config->udma_mask) {
- u8 udma_etc;
-
- pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc);
-
- /* clear transfer mode bit */
- udma_etc &= ~0x20;
-
- if (timing->udma) {
- /* preserve 80-wire cable detection bit */
- udma_etc &= 0x10;
- udma_etc |= t;
- }
-
- pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc);
- }
-}
-
-/**
- * via_set_drive - configure transfer mode
- * @hwif: port
- * @drive: Drive to set up
- *
- * via_set_drive() computes timing values configures the chipset to
- * a desired transfer mode. It also can be called by upper layers.
- */
-
-static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- ide_drive_t *peer = ide_get_pair_dev(drive);
- struct ide_host *host = dev_get_drvdata(hwif->dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- struct ide_timing t, p;
- unsigned int T, UT;
- const u8 speed = drive->dma_mode;
-
- T = 1000000000 / via_clock;
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: UT = T; break;
- case ATA_UDMA4: UT = T/2; break;
- case ATA_UDMA5: UT = T/3; break;
- case ATA_UDMA6: UT = T/4; break;
- default: UT = T;
- }
-
- ide_timing_compute(drive, speed, &t, T, UT);
-
- if (peer) {
- ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
- ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
- }
-
- via_set_speed(hwif, drive->dn, &t);
-}
-
-/**
- * via_set_pio_mode - set host controller for PIO mode
- * @hwif: port
- * @drive: drive
- *
- * A callback from the upper layers for PIO-only tuning.
- */
-
-static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- drive->dma_mode = drive->pio_mode;
- via_set_drive(hwif, drive);
-}
-
-static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
-{
- struct via_isa_bridge *via_config;
-
- for (via_config = via_isa_bridges;
- via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++)
- if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
- !!(via_config->flags & VIA_BAD_ID),
- via_config->id, NULL))) {
-
- if ((*isa)->revision >= via_config->rev_min &&
- (*isa)->revision <= via_config->rev_max)
- break;
- pci_dev_put(*isa);
- }
-
- return via_config;
-}
-
-/*
- * Check and handle 80-wire cable presence
- */
-static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
-{
- int i;
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA4:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> (i & 16)) & 8) &&
- ((u >> i) & 0x20) &&
- (((u >> i) & 7) < 2)) {
- /*
- * 2x PCI clock and
- * UDMA w/ < 3T/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA5:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 4))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA6:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 6))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
- }
-}
-
-/**
- * init_chipset_via82cxxx - initialization handler
- * @dev: PCI device
- *
- * The initialization callback. Here we determine the IDE chip type
- * and initialize its drive independent registers.
- */
-
-static int init_chipset_via82cxxx(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- struct via_isa_bridge *via_config = vdev->via_config;
- u8 t, v;
- u32 u;
-
- /*
- * Detect cable and configure Clk66
- */
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-
- via_cable_detect(vdev, u);
-
- if (via_config->udma_mask == ATA_UDMA4) {
- /* Enable Clk66 */
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
- } else if (via_config->flags & VIA_BAD_CLK66) {
- /* Would cause trouble on 596a and 686 */
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
- }
-
- /*
- * Check whether interfaces are enabled.
- */
-
- pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
-
- /*
- * Set up FIFO sizes and thresholds.
- */
-
- pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
-
- /* Disable PREQ# till DDACK# */
- if (via_config->flags & VIA_BAD_PREQ) {
- /* Would crash on 586b rev 41 */
- t &= 0x7f;
- }
-
- /* Fix FIFO split between channels */
- if (via_config->flags & VIA_SET_FIFO) {
- t &= (t & 0x9f);
- switch (v & 3) {
- case 2: t |= 0x00; break; /* 16 on primary */
- case 1: t |= 0x60; break; /* 16 on secondary */
- case 3: t |= 0x20; break; /* 8 pri 8 sec */
- }
- }
-
- pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
-
- return 0;
-}
-
-/*
- * Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
- {
- .ident = "Acer Ferrari 3400",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
- DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
- },
- },
- { }
-};
-
-static int via_cable_override(struct pci_dev *pdev)
-{
- /* Systems by DMI */
- if (dmi_check_system(cable_dmi_table))
- return 1;
-
- /* Arima W730-K8/Targa Visionary 811/... */
- if (pdev->subsystem_vendor == 0x161F &&
- pdev->subsystem_device == 0x2032)
- return 1;
-
- return 0;
-}
-
-static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(pdev);
- struct via82cxxx_dev *vdev = host->host_priv;
-
- if (via_cable_override(pdev))
- return ATA_CBL_PATA40_SHORT;
-
- if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0)
- return ATA_CBL_SATA;
-
- if ((vdev->via_80w >> hwif->channel) & 1)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops via_port_ops = {
- .set_pio_mode = via_set_pio_mode,
- .set_dma_mode = via_set_drive,
- .cable_detect = via82cxxx_cable_detect,
-};
-
-static const struct ide_port_info via82cxxx_chipset = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_via82cxxx,
- .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
- .port_ops = &via_port_ops,
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_IO_32BIT,
- .pio_mask = ATA_PIO5,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct pci_dev *isa = NULL;
- struct via_isa_bridge *via_config;
- struct via82cxxx_dev *vdev;
- int rc;
- u8 idx = id->driver_data;
- struct ide_port_info d;
-
- d = via82cxxx_chipset;
-
- /*
- * Find the ISA bridge and check we know what it is.
- */
- via_config = via_config_find(&isa);
-
- /*
- * Print the boot message.
- */
- printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
- pci_name(dev), via_config->name, isa->revision,
- via_config->udma_mask ? "U" : "MW",
- via_dma[via_config->udma_mask ?
- (fls(via_config->udma_mask) - 1) : 0]);
-
- pci_dev_put(isa);
-
- /*
- * Determine system bus clock.
- */
- via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
- switch (via_clock) {
- case 33000: via_clock = 33333; break;
- case 37000: via_clock = 37500; break;
- case 41000: via_clock = 41666; break;
- }
-
- if (via_clock < 20000 || via_clock > 50000) {
- printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
- "impossible (%d), using 33 MHz instead.\n", via_clock);
- via_clock = 33333;
- }
-
- if (idx == 1)
- d.enablebits[1].reg = d.enablebits[0].reg = 0;
- else
- d.host_flags |= IDE_HFLAG_NO_AUTODMA;
-
- if (idx == VIA_IDFLAG_SINGLE)
- d.host_flags |= IDE_HFLAG_SINGLE;
-
- if ((via_config->flags & VIA_NO_UNMASK) == 0)
- d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
-
- d.udma_mask = via_config->udma_mask;
-
- vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
- if (!vdev) {
- printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
- pci_name(dev));
- return -ENOMEM;
- }
-
- vdev->via_config = via_config;
-
- rc = ide_pci_init_one(dev, &d, vdev);
- if (rc)
- kfree(vdev);
-
- return rc;
-}
-
-static void via_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
-
- ide_pci_remove(dev);
- kfree(vdev);
-}
-
-static const struct pci_device_id via_pci_tbl[] = {
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, via_pci_tbl);
-
-static struct pci_driver via_pci_driver = {
- .name = "VIA_IDE",
- .id_table = via_pci_tbl,
- .probe = via_init_one,
- .remove = via_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init via_ide_init(void)
-{
- return ide_pci_register_driver(&via_pci_driver);
-}
-
-static void __exit via_ide_exit(void)
-{
- pci_unregister_driver(&via_pci_driver);
-}
-
-module_init(via_ide_init);
-module_exit(via_ide_exit);
-
-MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for VIA IDE");
-MODULE_LICENSE("GPL");