summaryrefslogtreecommitdiff
path: root/drivers/isdn/hisax/sedlbauer_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/isdn/hisax/sedlbauer_cs.c')
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c83
1 files changed, 21 insertions, 62 deletions
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 1f4feaab21af..a024192b672a 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -46,7 +46,6 @@
#include <asm/io.h>
#include <asm/system.h>
-#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
@@ -130,9 +129,8 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
/* from old sedl_cs
*/
/* The io structure describes IO port mapping */
- link->io.NumPorts1 = 8;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = 3;
+ link->resource[0]->end = 8;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
@@ -173,8 +171,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
unsigned int vcc,
void *priv_data)
{
- win_req_t *req = priv_data;
-
if (cfg->index == 0)
return -ENODEV;
@@ -202,52 +198,25 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
- p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.BasePort1 = io->win[0].base;
- p_dev->io.NumPorts1 = io->win[0].len;
+ p_dev->resource[0]->start = io->win[0].base;
+ p_dev->resource[0]->end = io->win[0].len;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |=
+ pcmcia_io_cfg_data_width(io->flags);
if (io->nwin > 1) {
- p_dev->io.Attributes2 = p_dev->io.Attributes1;
- p_dev->io.BasePort2 = io->win[1].base;
- p_dev->io.NumPorts2 = io->win[1].len;
+ p_dev->resource[1]->flags = p_dev->resource[0]->flags;
+ p_dev->resource[1]->start = io->win[1].base;
+ p_dev->resource[1]->end = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ p_dev->io_lines = 3;
+ if (pcmcia_request_io(p_dev) != 0)
return -ENODEV;
}
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
- memreq_t map;
- req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req->Attributes |= WIN_ENABLE;
- req->Base = mem->win[0].host_addr;
- req->Size = mem->win[0].len;
- req->AccessSpeed = 0;
- if (pcmcia_request_window(p_dev, req, &p_dev->win) != 0)
- return -ENODEV;
- map.Page = 0;
- map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(p_dev, p_dev->win, &map) != 0)
- return -ENODEV;
- }
return 0;
}
@@ -255,16 +224,11 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
- win_req_t *req;
int ret;
IsdnCard_t icard;
dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link);
- req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
- if (!req)
- return -ENOMEM;
-
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
@@ -277,7 +241,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- ret = pcmcia_loop_config(link, sedlbauer_config_check, req);
+ ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL);
if (ret)
goto failed;
@@ -297,27 +261,22 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq);
- if (link->io.NumPorts1)
- printk(", io 0x%04x-0x%04x", link->io.BasePort1,
- link->io.BasePort1+link->io.NumPorts1-1);
- if (link->io.NumPorts2)
- printk(" & 0x%04x-0x%04x", link->io.BasePort2,
- link->io.BasePort2+link->io.NumPorts2-1);
- if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req->Base,
- req->Base+req->Size-1);
+ if (link->resource[0])
+ printk(" & %pR", link->resource[0]);
+ if (link->resource[1])
+ printk(" & %pR", link->resource[1]);
printk("\n");
icard.para[0] = link->irq;
- icard.para[1] = link->io.BasePort1;
+ icard.para[1] = link->resource[0]->start;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
ret = hisax_init_pcmcia(link,
&(((local_info_t *)link->priv)->stop), &icard);
if (ret < 0) {
- printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d at i/o %#x\n",
- ret, link->io.BasePort1);
+ printk(KERN_ERR "sedlbauer_cs: failed to initialize SEDLBAUER PCMCIA %d with %pR\n",
+ ret, link->resource[0]);
sedlbauer_release(link);
return -ENODEV;
} else