diff options
Diffstat (limited to 'drivers/media/video/em28xx/em28xx-cards.c')
| -rw-r--r-- | drivers/media/video/em28xx/em28xx-cards.c | 60 |
1 files changed, 59 insertions, 1 deletions
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 3e4f3c7e92e7..938c51e1c86d 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -157,6 +157,28 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .mts_firmware = 1, + .has_dvb = 1, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = 0, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = 1, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = 1, + } }, + }, + [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { + .name = "Hauppauge WinTV HVR 900 (R2)", + .vchannels = 3, + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_XC2028, + .mts_firmware = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, @@ -195,6 +217,29 @@ struct em28xx_board em28xx_boards[] = { .amux = 1, } }, }, + [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { + .name = "Pinnacle PCTV HD Pro Stick", + .vchannels = 3, + .tda9887_conf = TDA9887_PRESENT, + .tuner_type = TUNER_XC2028, + .mts_firmware = 1, + .has_12mhz_i2s = 1, + .has_dvb = 1, + .decoder = EM28XX_TVP5150, + .input = { { + .type = EM28XX_VMUX_TELEVISION, + .vmux = TVP5150_COMPOSITE0, + .amux = 0, + }, { + .type = EM28XX_VMUX_COMPOSITE1, + .vmux = TVP5150_COMPOSITE1, + .amux = 1, + }, { + .type = EM28XX_VMUX_SVIDEO, + .vmux = TVP5150_SVIDEO, + .amux = 1, + } }, + }, [EM2880_BOARD_TERRATEC_HYBRID_XS] = { .name = "Terratec Hybrid XS", .vchannels = 3, @@ -416,10 +461,12 @@ struct usb_device_id em28xx_id_table [] = { .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, { USB_DEVICE(0x2304, 0x021a), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, + { USB_DEVICE(0x2304, 0x0227), + .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, { USB_DEVICE(0x2040, 0x6502), - .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, + .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 }, { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ @@ -524,6 +571,9 @@ void em28xx_pre_card_setup(struct em28xx *dev) rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (rc > 0) { switch (rc) { + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; @@ -538,8 +588,10 @@ void em28xx_pre_card_setup(struct em28xx *dev) switch (dev->model) { case EM2880_BOARD_TERRATEC_PRODIGY_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2880_BOARD_TERRATEC_HYBRID_XS: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x27", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); msleep(50); @@ -572,7 +624,12 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: ctl->demod = XC3028_FE_ZARLINK456; break; + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: + /* djh - Not sure which demod we need here */ + ctl->demod = XC3028_FE_DEFAULT; + break; case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: + case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: /* FIXME: Better to specify the needed IF */ ctl->demod = XC3028_FE_DEFAULT; break; @@ -750,6 +807,7 @@ void em28xx_card_setup(struct em28xx *dev) switch (dev->model) { case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: + case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950: { struct tveeprom tv; |