summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/sh_mobile_sdhi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/sh_mobile_sdhi.c')
-rw-r--r--drivers/mmc/host/sh_mobile_sdhi.c95
1 files changed, 50 insertions, 45 deletions
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index d46c2d00c182..bc6be0dbea39 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -143,6 +143,7 @@ MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
struct sh_mobile_sdhi {
struct clk *clk;
+ struct clk *clk_cd;
struct tmio_mmc_data mmc_data;
struct tmio_mmc_dma dma_priv;
struct pinctrl *pinctrl;
@@ -190,6 +191,12 @@ static int sh_mobile_sdhi_clk_enable(struct tmio_mmc_host *host)
if (ret < 0)
return ret;
+ ret = clk_prepare_enable(priv->clk_cd);
+ if (ret < 0) {
+ clk_disable_unprepare(priv->clk);
+ return ret;
+ }
+
/*
* The clock driver may not know what maximum frequency
* actually works, so it should be set with the max-frequency
@@ -255,6 +262,7 @@ static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host)
struct sh_mobile_sdhi *priv = host_to_priv(host);
clk_disable_unprepare(priv->clk);
+ clk_disable_unprepare(priv->clk_cd);
}
static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc)
@@ -335,9 +343,6 @@ static unsigned int sh_mobile_sdhi_init_tuning(struct tmio_mmc_host *host)
{
struct sh_mobile_sdhi *priv;
- if (!(host->mmc->caps & MMC_CAP_UHS_SDR104))
- return 0;
-
priv = host_to_priv(host);
/* set sampling clock selection range */
@@ -444,12 +449,7 @@ static int sh_mobile_sdhi_select_tuning(struct tmio_mmc_host *host)
static bool sh_mobile_sdhi_check_scc_error(struct tmio_mmc_host *host)
{
- struct sh_mobile_sdhi *priv;
-
- if (!(host->mmc->caps & MMC_CAP_UHS_SDR104))
- return 0;
-
- priv = host_to_priv(host);
+ struct sh_mobile_sdhi *priv = host_to_priv(host);
/* Check SCC error */
if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL) &
@@ -468,9 +468,6 @@ static void sh_mobile_sdhi_hw_reset(struct tmio_mmc_host *host)
{
struct sh_mobile_sdhi *priv;
- if (!(host->mmc->caps & MMC_CAP_UHS_SDR104))
- return;
-
priv = host_to_priv(host);
/* Reset SCC */
@@ -556,8 +553,7 @@ static void sh_mobile_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
static int sh_mobile_sdhi_probe(struct platform_device *pdev)
{
- const struct of_device_id *of_id =
- of_match_device(sh_mobile_sdhi_of_match, &pdev->dev);
+ const struct sh_mobile_sdhi_of_data *of_data = of_device_get_match_data(&pdev->dev);
struct sh_mobile_sdhi *priv;
struct tmio_mmc_data *mmc_data;
struct tmio_mmc_data *mmd = pdev->dev.platform_data;
@@ -584,6 +580,21 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
goto eprobe;
}
+ /*
+ * Some controllers provide a 2nd clock just to run the internal card
+ * detection logic. Unfortunately, the existing driver architecture does
+ * not support a separation of clocks for runtime PM usage. When
+ * native hotplug is used, the tmio driver assumes that the core
+ * must continue to run for card detect to stay active, so we cannot
+ * disable it.
+ * Additionally, it is prohibited to supply a clock to the core but not
+ * to the card detect circuit. That leaves us with if separate clocks
+ * are presented, we must treat them both as virtually 1 clock.
+ */
+ priv->clk_cd = devm_clk_get(&pdev->dev, "cd");
+ if (IS_ERR(priv->clk_cd))
+ priv->clk_cd = NULL;
+
priv->pinctrl = devm_pinctrl_get(&pdev->dev);
if (!IS_ERR(priv->pinctrl)) {
priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
@@ -598,9 +609,8 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
goto eprobe;
}
- if (of_id && of_id->data) {
- const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
+ if (of_data) {
mmc_data->flags |= of_data->tmio_flags;
mmc_data->ocr_mask = of_data->tmio_ocr_mask;
mmc_data->capabilities |= of_data->capabilities;
@@ -623,11 +633,6 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
host->card_busy = sh_mobile_sdhi_card_busy;
host->start_signal_voltage_switch =
sh_mobile_sdhi_start_signal_voltage_switch;
- host->init_tuning = sh_mobile_sdhi_init_tuning;
- host->prepare_tuning = sh_mobile_sdhi_prepare_tuning;
- host->select_tuning = sh_mobile_sdhi_select_tuning;
- host->check_scc_error = sh_mobile_sdhi_check_scc_error;
- host->hw_reset = sh_mobile_sdhi_hw_reset;
}
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
@@ -659,40 +664,40 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
*/
mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL;
- /*
- * All SDHI need SDIO_INFO1 reserved bit
- */
- mmc_data->flags |= TMIO_MMC_SDIO_STATUS_QUIRK;
+ /* All SDHI have SDIO status bits which must be 1 */
+ mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS;
ret = tmio_mmc_host_probe(host, mmc_data);
if (ret < 0)
goto efree;
- if (host->mmc->caps & MMC_CAP_UHS_SDR104) {
+ /* Enable tuning iff we have an SCC and a supported mode */
+ if (of_data && of_data->scc_offset &&
+ (host->mmc->caps & MMC_CAP_UHS_SDR104 ||
+ host->mmc->caps2 & MMC_CAP2_HS200_1_8V_SDR)) {
+ const struct sh_mobile_sdhi_scc *taps = of_data->taps;
+ bool hit = false;
+
host->mmc->caps |= MMC_CAP_HW_RESET;
- if (of_id && of_id->data) {
- const struct sh_mobile_sdhi_of_data *of_data;
- const struct sh_mobile_sdhi_scc *taps;
- bool hit = false;
-
- of_data = of_id->data;
- taps = of_data->taps;
-
- for (i = 0; i < of_data->taps_num; i++) {
- if (taps[i].clk_rate == 0 ||
- taps[i].clk_rate == host->mmc->f_max) {
- host->scc_tappos = taps->tap;
- hit = true;
- break;
- }
+ for (i = 0; i < of_data->taps_num; i++) {
+ if (taps[i].clk_rate == 0 ||
+ taps[i].clk_rate == host->mmc->f_max) {
+ host->scc_tappos = taps->tap;
+ hit = true;
+ break;
}
+ }
- if (!hit)
- dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
+ if (!hit)
+ dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n");
- priv->scc_ctl = host->ctl + of_data->scc_offset;
- }
+ priv->scc_ctl = host->ctl + of_data->scc_offset;
+ host->init_tuning = sh_mobile_sdhi_init_tuning;
+ host->prepare_tuning = sh_mobile_sdhi_prepare_tuning;
+ host->select_tuning = sh_mobile_sdhi_select_tuning;
+ host->check_scc_error = sh_mobile_sdhi_check_scc_error;
+ host->hw_reset = sh_mobile_sdhi_hw_reset;
}
i = 0;