summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/Kconfig')
-rw-r--r--drivers/mtd/nand/Kconfig42
1 files changed, 41 insertions, 1 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7d17cecad69d..31bb7e5b504a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -115,6 +115,46 @@ config MTD_NAND_OMAP2
Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
platforms.
+config MTD_NAND_OMAP_BCH
+ depends on MTD_NAND && MTD_NAND_OMAP2 && ARCH_OMAP3
+ bool "Enable support for hardware BCH error correction"
+ default n
+ select BCH
+ select BCH_CONST_PARAMS
+ help
+ Support for hardware BCH error correction.
+
+choice
+ prompt "BCH error correction capability"
+ depends on MTD_NAND_OMAP_BCH
+
+config MTD_NAND_OMAP_BCH8
+ bool "8 bits / 512 bytes (recommended)"
+ help
+ Support correcting up to 8 bitflips per 512-byte block.
+ This will use 13 bytes of spare area per 512 bytes of page data.
+ This is the recommended mode, as 4-bit mode does not work
+ on some OMAP3 revisions, due to a hardware bug.
+
+config MTD_NAND_OMAP_BCH4
+ bool "4 bits / 512 bytes"
+ help
+ Support correcting up to 4 bitflips per 512-byte block.
+ This will use 7 bytes of spare area per 512 bytes of page data.
+ Note that this mode does not work on some OMAP3 revisions, due to a
+ hardware bug. Please check your OMAP datasheet before selecting this
+ mode.
+
+endchoice
+
+if MTD_NAND_OMAP_BCH
+config BCH_CONST_M
+ default 13
+config BCH_CONST_T
+ default 4 if MTD_NAND_OMAP_BCH4
+ default 8 if MTD_NAND_OMAP_BCH8
+endif
+
config MTD_NAND_IDS
tristate
@@ -440,7 +480,7 @@ config MTD_NAND_NANDSIM
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
- depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH