summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/denali.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/denali.h')
-rw-r--r--drivers/mtd/nand/denali.h148
1 files changed, 44 insertions, 104 deletions
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
index 422a29ab2f60..3918bcb1561e 100644
--- a/drivers/mtd/nand/denali.h
+++ b/drivers/mtd/nand/denali.h
@@ -17,7 +17,7 @@
*
*/
-#include <linux/mtd/nand.h>
+#include <linux/mtd/nand.h>
#define DEVICE_RESET 0x0
#define DEVICE_RESET__BANK0 0x0001
@@ -29,7 +29,7 @@
#define TRANSFER_SPARE_REG__FLAG 0x0001
#define LOAD_WAIT_CNT 0x20
-#define LOAD_WAIT_CNT__VALUE 0xffff
+#define LOAD_WAIT_CNT__VALUE 0xffff
#define PROGRAM_WAIT_CNT 0x30
#define PROGRAM_WAIT_CNT__VALUE 0xffff
@@ -83,7 +83,7 @@
#define RE_2_WE 0x120
#define RE_2_WE__VALUE 0x003f
-#define ACC_CLKS 0x130
+#define ACC_CLKS 0x130
#define ACC_CLKS__VALUE 0x000f
#define NUMBER_OF_PLANES 0x140
@@ -140,7 +140,7 @@
#define DEVICES_CONNECTED 0x250
#define DEVICES_CONNECTED__VALUE 0x0007
-#define DIE_MASK 0x260
+#define DIE_MASK 0x260
#define DIE_MASK__VALUE 0x00ff
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
@@ -152,7 +152,7 @@
#define RE_2_RE 0x290
#define RE_2_RE__VALUE 0x003f
-#define MANUFACTURER_ID 0x300
+#define MANUFACTURER_ID 0x300
#define MANUFACTURER_ID__VALUE 0x00ff
#define DEVICE_ID 0x310
@@ -173,13 +173,13 @@
#define LOGICAL_PAGE_SPARE_SIZE 0x360
#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
-#define REVISION 0x370
+#define REVISION 0x370
#define REVISION__VALUE 0xffff
#define ONFI_DEVICE_FEATURES 0x380
#define ONFI_DEVICE_FEATURES__VALUE 0x003f
-#define ONFI_OPTIONAL_COMMANDS 0x390
+#define ONFI_OPTIONAL_COMMANDS 0x390
#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
#define ONFI_TIMING_MODE 0x3a0
@@ -201,12 +201,12 @@
#define FEATURES 0x3f0
#define FEATURES__N_BANKS 0x0003
#define FEATURES__ECC_MAX_ERR 0x003c
-#define FEATURES__DMA 0x0040
+#define FEATURES__DMA 0x0040
#define FEATURES__CMD_DMA 0x0080
#define FEATURES__PARTITION 0x0100
#define FEATURES__XDMA_SIDEBAND 0x0200
#define FEATURES__GPREG 0x0400
-#define FEATURES__INDEX_ADDR 0x0800
+#define FEATURES__INDEX_ADDR 0x0800
#define TRANSFER_MODE 0x400
#define TRANSFER_MODE__VALUE 0x0003
@@ -235,12 +235,12 @@
#define INTR_EN0__DMA_CMD_COMP 0x0004
#define INTR_EN0__TIME_OUT 0x0008
#define INTR_EN0__PROGRAM_FAIL 0x0010
-#define INTR_EN0__ERASE_FAIL 0x0020
+#define INTR_EN0__ERASE_FAIL 0x0020
#define INTR_EN0__LOAD_COMP 0x0040
#define INTR_EN0__PROGRAM_COMP 0x0080
-#define INTR_EN0__ERASE_COMP 0x0100
+#define INTR_EN0__ERASE_COMP 0x0100
#define INTR_EN0__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN0__LOCKED_BLK 0x0400
+#define INTR_EN0__LOCKED_BLK 0x0400
#define INTR_EN0__UNSUP_CMD 0x0800
#define INTR_EN0__INT_ACT 0x1000
#define INTR_EN0__RST_COMP 0x2000
@@ -253,7 +253,7 @@
#define ERR_PAGE_ADDR0 0x440
#define ERR_PAGE_ADDR0__VALUE 0xffff
-#define ERR_BLOCK_ADDR0 0x450
+#define ERR_BLOCK_ADDR0 0x450
#define ERR_BLOCK_ADDR0__VALUE 0xffff
#define INTR_STATUS1 0x460
@@ -280,12 +280,12 @@
#define INTR_EN1__DMA_CMD_COMP 0x0004
#define INTR_EN1__TIME_OUT 0x0008
#define INTR_EN1__PROGRAM_FAIL 0x0010
-#define INTR_EN1__ERASE_FAIL 0x0020
+#define INTR_EN1__ERASE_FAIL 0x0020
#define INTR_EN1__LOAD_COMP 0x0040
#define INTR_EN1__PROGRAM_COMP 0x0080
-#define INTR_EN1__ERASE_COMP 0x0100
+#define INTR_EN1__ERASE_COMP 0x0100
#define INTR_EN1__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN1__LOCKED_BLK 0x0400
+#define INTR_EN1__LOCKED_BLK 0x0400
#define INTR_EN1__UNSUP_CMD 0x0800
#define INTR_EN1__INT_ACT 0x1000
#define INTR_EN1__RST_COMP 0x2000
@@ -298,7 +298,7 @@
#define ERR_PAGE_ADDR1 0x490
#define ERR_PAGE_ADDR1__VALUE 0xffff
-#define ERR_BLOCK_ADDR1 0x4a0
+#define ERR_BLOCK_ADDR1 0x4a0
#define ERR_BLOCK_ADDR1__VALUE 0xffff
#define INTR_STATUS2 0x4b0
@@ -325,12 +325,12 @@
#define INTR_EN2__DMA_CMD_COMP 0x0004
#define INTR_EN2__TIME_OUT 0x0008
#define INTR_EN2__PROGRAM_FAIL 0x0010
-#define INTR_EN2__ERASE_FAIL 0x0020
+#define INTR_EN2__ERASE_FAIL 0x0020
#define INTR_EN2__LOAD_COMP 0x0040
#define INTR_EN2__PROGRAM_COMP 0x0080
-#define INTR_EN2__ERASE_COMP 0x0100
+#define INTR_EN2__ERASE_COMP 0x0100
#define INTR_EN2__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN2__LOCKED_BLK 0x0400
+#define INTR_EN2__LOCKED_BLK 0x0400
#define INTR_EN2__UNSUP_CMD 0x0800
#define INTR_EN2__INT_ACT 0x1000
#define INTR_EN2__RST_COMP 0x2000
@@ -343,7 +343,7 @@
#define ERR_PAGE_ADDR2 0x4e0
#define ERR_PAGE_ADDR2__VALUE 0xffff
-#define ERR_BLOCK_ADDR2 0x4f0
+#define ERR_BLOCK_ADDR2 0x4f0
#define ERR_BLOCK_ADDR2__VALUE 0xffff
#define INTR_STATUS3 0x500
@@ -370,12 +370,12 @@
#define INTR_EN3__DMA_CMD_COMP 0x0004
#define INTR_EN3__TIME_OUT 0x0008
#define INTR_EN3__PROGRAM_FAIL 0x0010
-#define INTR_EN3__ERASE_FAIL 0x0020
+#define INTR_EN3__ERASE_FAIL 0x0020
#define INTR_EN3__LOAD_COMP 0x0040
#define INTR_EN3__PROGRAM_COMP 0x0080
-#define INTR_EN3__ERASE_COMP 0x0100
+#define INTR_EN3__ERASE_COMP 0x0100
#define INTR_EN3__PIPE_CPYBCK_CMD_COMP 0x0200
-#define INTR_EN3__LOCKED_BLK 0x0400
+#define INTR_EN3__LOCKED_BLK 0x0400
#define INTR_EN3__UNSUP_CMD 0x0800
#define INTR_EN3__INT_ACT 0x1000
#define INTR_EN3__RST_COMP 0x2000
@@ -388,7 +388,7 @@
#define ERR_PAGE_ADDR3 0x530
#define ERR_PAGE_ADDR3__VALUE 0xffff
-#define ERR_BLOCK_ADDR3 0x540
+#define ERR_BLOCK_ADDR3 0x540
#define ERR_BLOCK_ADDR3__VALUE 0xffff
#define DATA_INTR 0x550
@@ -412,9 +412,9 @@
#define GPREG_3__VALUE 0xffff
#define ECC_THRESHOLD 0x600
-#define ECC_THRESHOLD__VALUE 0x03ff
+#define ECC_THRESHOLD__VALUE 0x03ff
-#define ECC_ERROR_BLOCK_ADDRESS 0x610
+#define ECC_ERROR_BLOCK_ADDRESS 0x610
#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
#define ECC_ERROR_PAGE_ADDRESS 0x620
@@ -466,7 +466,7 @@
#define CHNL_ACTIVE__CHANNEL3 0x0008
#define ACTIVE_SRC_ID 0x800
-#define ACTIVE_SRC_ID__VALUE 0x00ff
+#define ACTIVE_SRC_ID__VALUE 0x00ff
#define PTN_INTR 0x810
#define PTN_INTR__CONFIG_ERROR 0x0001
@@ -485,7 +485,7 @@
#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020
#define PERM_SRC_ID_0 0x830
-#define PERM_SRC_ID_0__SRCID 0x00ff
+#define PERM_SRC_ID_0__SRCID 0x00ff
#define PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_0__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_0__READ_ACTIVE 0x4000
@@ -502,7 +502,7 @@
#define MIN_MAX_BANK_0__MAX_VALUE 0x000c
#define PERM_SRC_ID_1 0x870
-#define PERM_SRC_ID_1__SRCID 0x00ff
+#define PERM_SRC_ID_1__SRCID 0x00ff
#define PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_1__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_1__READ_ACTIVE 0x4000
@@ -519,7 +519,7 @@
#define MIN_MAX_BANK_1__MAX_VALUE 0x000c
#define PERM_SRC_ID_2 0x8b0
-#define PERM_SRC_ID_2__SRCID 0x00ff
+#define PERM_SRC_ID_2__SRCID 0x00ff
#define PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_2__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_2__READ_ACTIVE 0x4000
@@ -536,7 +536,7 @@
#define MIN_MAX_BANK_2__MAX_VALUE 0x000c
#define PERM_SRC_ID_3 0x8f0
-#define PERM_SRC_ID_3__SRCID 0x00ff
+#define PERM_SRC_ID_3__SRCID 0x00ff
#define PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_3__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_3__READ_ACTIVE 0x4000
@@ -553,7 +553,7 @@
#define MIN_MAX_BANK_3__MAX_VALUE 0x000c
#define PERM_SRC_ID_4 0x930
-#define PERM_SRC_ID_4__SRCID 0x00ff
+#define PERM_SRC_ID_4__SRCID 0x00ff
#define PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_4__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_4__READ_ACTIVE 0x4000
@@ -570,7 +570,7 @@
#define MIN_MAX_BANK_4__MAX_VALUE 0x000c
#define PERM_SRC_ID_5 0x970
-#define PERM_SRC_ID_5__SRCID 0x00ff
+#define PERM_SRC_ID_5__SRCID 0x00ff
#define PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_5__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_5__READ_ACTIVE 0x4000
@@ -587,7 +587,7 @@
#define MIN_MAX_BANK_5__MAX_VALUE 0x000c
#define PERM_SRC_ID_6 0x9b0
-#define PERM_SRC_ID_6__SRCID 0x00ff
+#define PERM_SRC_ID_6__SRCID 0x00ff
#define PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_6__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_6__READ_ACTIVE 0x4000
@@ -604,7 +604,7 @@
#define MIN_MAX_BANK_6__MAX_VALUE 0x000c
#define PERM_SRC_ID_7 0x9f0
-#define PERM_SRC_ID_7__SRCID 0x00ff
+#define PERM_SRC_ID_7__SRCID 0x00ff
#define PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE 0x0800
#define PERM_SRC_ID_7__WRITE_ACTIVE 0x2000
#define PERM_SRC_ID_7__READ_ACTIVE 0x4000
@@ -620,47 +620,6 @@
#define MIN_MAX_BANK_7__MIN_VALUE 0x0003
#define MIN_MAX_BANK_7__MAX_VALUE 0x000c
-/* flash.h */
-struct device_info_tag {
- uint16_t wDeviceMaker;
- uint16_t wDeviceID;
- uint8_t bDeviceParam0;
- uint8_t bDeviceParam1;
- uint8_t bDeviceParam2;
- uint32_t wDeviceType;
- uint32_t wSpectraStartBlock;
- uint32_t wSpectraEndBlock;
- uint32_t wTotalBlocks;
- uint16_t wPagesPerBlock;
- uint16_t wPageSize;
- uint16_t wPageDataSize;
- uint16_t wPageSpareSize;
- uint16_t wNumPageSpareFlag;
- uint16_t wECCBytesPerSector;
- uint32_t wBlockSize;
- uint32_t wBlockDataSize;
- uint32_t wDataBlockNum;
- uint8_t bPlaneNum;
- uint16_t wDeviceMainAreaSize;
- uint16_t wDeviceSpareAreaSize;
- uint16_t wDevicesConnected;
- uint16_t wDeviceWidth;
- uint16_t wHWRevision;
- uint16_t wHWFeatures;
-
- uint16_t wONFIDevFeatures;
- uint16_t wONFIOptCommands;
- uint16_t wONFITimingMode;
- uint16_t wONFIPgmCacheTimingMode;
-
- uint16_t MLCDevice;
- uint16_t wSpareSkipBytes;
-
- uint8_t nBitsInPageNumber;
- uint8_t nBitsInPageDataSize;
- uint8_t nBitsInBlockDataSize;
-};
-
/* ffsdefs.h */
#define CLEAR 0 /*use this to clear a field instead of "fail"*/
#define SET 1 /*use this to set a field instead of "pass"*/
@@ -676,24 +635,6 @@ struct device_info_tag {
#define CLK_X 5
#define CLK_MULTI 4
-/* ffsport.h */
-#define VERBOSE 1
-
-#define NAND_DBG_WARN 1
-#define NAND_DBG_DEBUG 2
-#define NAND_DBG_TRACE 3
-
-#ifdef VERBOSE
-#define nand_dbg_print(level, args...) \
- do { \
- if (level <= nand_debug_level) \
- printk(KERN_ALERT args); \
- } while (0)
-#else
-#define nand_dbg_print(level, args...)
-#endif
-
-
/* spectraswconfig.h */
#define CMD_DMA 0
@@ -772,10 +713,9 @@ struct device_info_tag {
#define ECC_SECTOR_SIZE 512
#define LLD_MAX_FLASH_BANKS 4
-#define DENALI_BUF_SIZE NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE
+#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE)
-struct nand_buf
-{
+struct nand_buf {
int head;
int tail;
uint8_t buf[DENALI_BUF_SIZE];
@@ -788,7 +728,6 @@ struct nand_buf
struct denali_nand_info {
struct mtd_info mtd;
struct nand_chip nand;
- struct device_info_tag dev_info;
int flash_bank; /* currently selected chip */
int status;
int platform;
@@ -806,11 +745,12 @@ struct denali_nand_info {
uint32_t irq_status;
int irq_debug_array[32];
int idx;
-};
-static uint16_t NAND_Flash_Reset(struct denali_nand_info *denali);
-static uint16_t NAND_Read_Device_ID(struct denali_nand_info *denali);
-static void NAND_LLD_Enable_Disable_Interrupts(struct denali_nand_info *denali, uint16_t INT_ENABLE);
+ uint32_t devnum; /* represent how many nands connected */
+ uint32_t fwblks; /* represent how many blocks FW used */
+ uint32_t totalblks;
+ uint32_t blksperchip;
+ uint32_t bbtskipbytes;
+};
#endif /*_LLD_NAND_*/
-