summaryrefslogtreecommitdiff
path: root/drivers/mtd/ubi/io.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/ubi/io.c')
-rw-r--r--drivers/mtd/ubi/io.c138
1 files changed, 50 insertions, 88 deletions
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index 332f992f13d9..c2960ac9f39c 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -376,25 +376,6 @@ retry:
return 0;
}
-/**
- * check_pattern - check if buffer contains only a certain byte pattern.
- * @buf: buffer to check
- * @patt: the pattern to check
- * @size: buffer size in bytes
- *
- * This function returns %1 in there are only @patt bytes in @buf, and %0 if
- * something else was also found.
- */
-static int check_pattern(const void *buf, uint8_t patt, int size)
-{
- int i;
-
- for (i = 0; i < size; i++)
- if (((const uint8_t *)buf)[i] != patt)
- return 0;
- return 1;
-}
-
/* Patterns to write to a physical eraseblock when torturing it */
static uint8_t patterns[] = {0xa5, 0x5a, 0x0};
@@ -426,7 +407,7 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
if (err)
goto out;
- err = check_pattern(ubi->peb_buf1, 0xFF, ubi->peb_size);
+ err = ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->peb_size);
if (err == 0) {
ubi_err("erased PEB %d, but a non-0xFF byte found",
pnum);
@@ -445,7 +426,8 @@ static int torture_peb(struct ubi_device *ubi, int pnum)
if (err)
goto out;
- err = check_pattern(ubi->peb_buf1, patterns[i], ubi->peb_size);
+ err = ubi_check_pattern(ubi->peb_buf1, patterns[i],
+ ubi->peb_size);
if (err == 0) {
ubi_err("pattern %x checking failed for PEB %d",
patterns[i], pnum);
@@ -517,7 +499,7 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
* In this case we probably anyway have garbage in this PEB.
*/
err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
- if (err1 == UBI_IO_BAD_HDR_READ || err1 == UBI_IO_BAD_HDR)
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
/*
* The VID header is corrupted, so we can safely erase this
* PEB and not afraid that it will be treated as a valid PEB in
@@ -712,47 +694,47 @@ bad:
* and corrected by the flash driver; this is harmless but may indicate that
* this eraseblock may become bad soon (but may be not);
* o %UBI_IO_BAD_HDR if the erase counter header is corrupted (a CRC error);
- * o %UBI_IO_PEB_EMPTY if the physical eraseblock is empty;
+ * o %UBI_IO_BAD_HDR_EBADMSG is the same as %UBI_IO_BAD_HDR, but there also was
+ * a data integrity error (uncorrectable ECC error in case of NAND);
+ * o %UBI_IO_FF if only 0xFF bytes were read (the PEB is supposedly empty)
* o a negative error code in case of failure.
*/
int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
struct ubi_ec_hdr *ec_hdr, int verbose)
{
- int err, read_err = 0;
+ int err, read_err;
uint32_t crc, magic, hdr_crc;
dbg_io("read EC header from PEB %d", pnum);
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
- err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
- if (err) {
- if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
- return err;
+ read_err = ubi_io_read(ubi, ec_hdr, pnum, 0, UBI_EC_HDR_SIZE);
+ if (read_err) {
+ if (read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ return read_err;
/*
* We read all the data, but either a correctable bit-flip
- * occurred, or MTD reported about some data integrity error,
- * like an ECC error in case of NAND. The former is harmless,
- * the later may mean that the read data is corrupted. But we
- * have a CRC check-sum and we will detect this. If the EC
- * header is still OK, we just report this as there was a
- * bit-flip.
+ * occurred, or MTD reported a data integrity error
+ * (uncorrectable ECC error in case of NAND). The former is
+ * harmless, the later may mean that the read data is
+ * corrupted. But we have a CRC check-sum and we will detect
+ * this. If the EC header is still OK, we just report this as
+ * there was a bit-flip, to force scrubbing.
*/
- if (err == -EBADMSG)
- read_err = UBI_IO_BAD_HDR_READ;
}
magic = be32_to_cpu(ec_hdr->magic);
if (magic != UBI_EC_HDR_MAGIC) {
- if (read_err)
- return read_err;
+ if (read_err == -EBADMSG)
+ return UBI_IO_BAD_HDR_EBADMSG;
/*
* The magic field is wrong. Let's check if we have read all
* 0xFF. If yes, this physical eraseblock is assumed to be
* empty.
*/
- if (check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
+ if (ubi_check_pattern(ec_hdr, 0xFF, UBI_EC_HDR_SIZE)) {
/* The physical eraseblock is supposedly empty */
if (verbose)
ubi_warn("no EC header found at PEB %d, "
@@ -760,7 +742,10 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
else if (UBI_IO_DEBUG)
dbg_msg("no EC header found at PEB %d, "
"only 0xFF bytes", pnum);
- return UBI_IO_PEB_EMPTY;
+ if (!read_err)
+ return UBI_IO_FF;
+ else
+ return UBI_IO_FF_BITFLIPS;
}
/*
@@ -788,7 +773,11 @@ int ubi_io_read_ec_hdr(struct ubi_device *ubi, int pnum,
} else if (UBI_IO_DEBUG)
dbg_msg("bad EC header CRC at PEB %d, calculated "
"%#08x, read %#08x", pnum, crc, hdr_crc);
- return read_err ?: UBI_IO_BAD_HDR;
+
+ if (!read_err)
+ return UBI_IO_BAD_HDR;
+ else
+ return UBI_IO_BAD_HDR_EBADMSG;
}
/* And of course validate what has just been read from the media */
@@ -975,22 +964,16 @@ bad:
*
* This function reads the volume identifier header from physical eraseblock
* @pnum and stores it in @vid_hdr. It also checks CRC checksum of the read
- * volume identifier header. The following codes may be returned:
+ * volume identifier header. The error codes are the same as in
+ * 'ubi_io_read_ec_hdr()'.
*
- * o %0 if the CRC checksum is correct and the header was successfully read;
- * o %UBI_IO_BITFLIPS if the CRC is correct, but bit-flips were detected
- * and corrected by the flash driver; this is harmless but may indicate that
- * this eraseblock may become bad soon;
- * o %UBI_IO_BAD_HDR if the volume identifier header is corrupted (a CRC
- * error detected);
- * o %UBI_IO_PEB_FREE if the physical eraseblock is free (i.e., there is no VID
- * header there);
- * o a negative error code in case of failure.
+ * Note, the implementation of this function is also very similar to
+ * 'ubi_io_read_ec_hdr()', so refer commentaries in 'ubi_io_read_ec_hdr()'.
*/
int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
struct ubi_vid_hdr *vid_hdr, int verbose)
{
- int err, read_err = 0;
+ int err, read_err;
uint32_t crc, magic, hdr_crc;
void *p;
@@ -998,48 +981,29 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
ubi_assert(pnum >= 0 && pnum < ubi->peb_count);
p = (char *)vid_hdr - ubi->vid_hdr_shift;
- err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
+ read_err = ubi_io_read(ubi, p, pnum, ubi->vid_hdr_aloffset,
ubi->vid_hdr_alsize);
- if (err) {
- if (err != UBI_IO_BITFLIPS && err != -EBADMSG)
- return err;
-
- /*
- * We read all the data, but either a correctable bit-flip
- * occurred, or MTD reported about some data integrity error,
- * like an ECC error in case of NAND. The former is harmless,
- * the later may mean the read data is corrupted. But we have a
- * CRC check-sum and we will identify this. If the VID header is
- * still OK, we just report this as there was a bit-flip.
- */
- if (err == -EBADMSG)
- read_err = UBI_IO_BAD_HDR_READ;
- }
+ if (read_err && read_err != UBI_IO_BITFLIPS && read_err != -EBADMSG)
+ return read_err;
magic = be32_to_cpu(vid_hdr->magic);
if (magic != UBI_VID_HDR_MAGIC) {
- if (read_err)
- return read_err;
+ if (read_err == -EBADMSG)
+ return UBI_IO_BAD_HDR_EBADMSG;
- /*
- * If we have read all 0xFF bytes, the VID header probably does
- * not exist and the physical eraseblock is assumed to be free.
- */
- if (check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
- /* The physical eraseblock is supposedly free */
+ if (ubi_check_pattern(vid_hdr, 0xFF, UBI_VID_HDR_SIZE)) {
if (verbose)
ubi_warn("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
else if (UBI_IO_DEBUG)
dbg_msg("no VID header found at PEB %d, "
"only 0xFF bytes", pnum);
- return UBI_IO_PEB_FREE;
+ if (!read_err)
+ return UBI_IO_FF;
+ else
+ return UBI_IO_FF_BITFLIPS;
}
- /*
- * This is not a valid VID header, and these are not 0xFF
- * bytes. Report that the header is corrupted.
- */
if (verbose) {
ubi_warn("bad magic number at PEB %d: %08x instead of "
"%08x", pnum, magic, UBI_VID_HDR_MAGIC);
@@ -1061,20 +1025,18 @@ int ubi_io_read_vid_hdr(struct ubi_device *ubi, int pnum,
} else if (UBI_IO_DEBUG)
dbg_msg("bad CRC at PEB %d, calculated %#08x, "
"read %#08x", pnum, crc, hdr_crc);
- return read_err ?: UBI_IO_BAD_HDR;
+ if (!read_err)
+ return UBI_IO_BAD_HDR;
+ else
+ return UBI_IO_BAD_HDR_EBADMSG;
}
- /* Validate the VID header that we have just read */
err = validate_vid_hdr(ubi, vid_hdr);
if (err) {
ubi_err("validation failed for PEB %d", pnum);
return -EINVAL;
}
- /*
- * If there was a read error (%-EBADMSG), but the header CRC is still
- * OK, report about a bit-flip to force scrubbing on this PEB.
- */
return read_err ? UBI_IO_BITFLIPS : 0;
}
@@ -1383,7 +1345,7 @@ int ubi_dbg_check_all_ff(struct ubi_device *ubi, int pnum, int offset, int len)
goto error;
}
- err = check_pattern(ubi->dbg_peb_buf, 0xFF, len);
+ err = ubi_check_pattern(ubi->dbg_peb_buf, 0xFF, len);
if (err == 0) {
ubi_err("flash region at PEB %d:%d, length %d does not "
"contain all 0xFF bytes", pnum, offset, len);