diff options
Diffstat (limited to 'drivers/net/Kconfig')
| -rw-r--r-- | drivers/net/Kconfig | 82 |
1 files changed, 71 insertions, 11 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ce2fcdd4ab90..53c4810b119e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -484,7 +484,7 @@ config XTENSA_XT2000_SONIC config MIPS_AU1X00_ENET tristate "MIPS AU1000 Ethernet support" - depends on SOC_AU1X00 + depends on MIPS_ALCHEMY select PHYLIB select CRC32 help @@ -530,14 +530,15 @@ config SH_ETH depends on SUPERH && \ (CPU_SUBTYPE_SH7710 || CPU_SUBTYPE_SH7712 || \ CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \ - CPU_SUBTYPE_SH7724) + CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757) select CRC32 select MII select MDIO_BITBANG select PHYLIB help Renesas SuperH Ethernet device driver. - This driver support SH7710, SH7712, SH7763, SH7619, and SH7724. + This driver supporting CPUs are: + - SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757. config SUNLANCE tristate "Sun LANCE support" @@ -913,7 +914,7 @@ config SMC91X tristate "SMC 91C9x/91C1xxx support" select CRC32 select MII - depends on ARM || REDWOOD_5 || REDWOOD_6 || M32R || SUPERH || \ + depends on ARM || M32R || SUPERH || \ MIPS || BLACKFIN || MN10300 || COLDFIRE help This is a driver for SMC's 91x series of Ethernet chipsets, @@ -927,6 +928,16 @@ config SMC91X The module will be called smc91x. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt>. +config PXA168_ETH + tristate "Marvell pxa168 ethernet support" + depends on CPU_PXA168 + select PHYLIB + help + This driver supports the pxa168 Ethernet ports. + + To compile this driver as a module, choose M here. The module + will be called pxa168_eth. + config NET_NETX tristate "NetX Ethernet support" select MII @@ -1463,7 +1474,7 @@ config FORCEDETH config CS89x0 tristate "CS89x0 support" depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \ - || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS) + || ARCH_IXDP2X01 || MACH_MX31ADS) ---help--- Support for CS89x0 chipset based Ethernet cards. If you have a network (Ethernet) card of this type, say Y and read the @@ -1477,7 +1488,7 @@ config CS89x0 config CS89x0_NONISA_IRQ def_bool y depends on CS89x0 != n - depends on MACH_IXDP2351 || ARCH_IXDP2X01 || ARCH_PNX010X || MACH_MX31ADS + depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS config TC35815 tristate "TOSHIBA TC35815 Ethernet support" @@ -1659,6 +1670,7 @@ config R6040 depends on NET_PCI && PCI select CRC32 select MII + select PHYLIB help This is a driver for the R6040 Fast Ethernet MACs found in the the RDC R-321x System-on-chips. @@ -1748,11 +1760,12 @@ config TLAN Please email feedback to <torben.mathiasen@compaq.com>. config KS8842 - tristate "Micrel KSZ8842" - depends on HAS_IOMEM + tristate "Micrel KSZ8841/42 with generic bus interface" + depends on HAS_IOMEM && DMA_ENGINE help - This platform driver is for Micrel KSZ8842 / KS8842 - 2-port ethernet switch chip (managed, VLAN, QoS). + This platform driver is for KSZ8841(1-port) / KS8842(2-port) + ethernet switch chip (managed, VLAN, QoS) from Micrel or + Timberdale(FPGA). config KS8851 tristate "Micrel KS8851 SPI" @@ -2601,6 +2614,29 @@ config CHELSIO_T4 To compile this driver as a module choose M here; the module will be called cxgb4. +config CHELSIO_T4VF_DEPENDS + tristate + depends on PCI && INET + default y + +config CHELSIO_T4VF + tristate "Chelsio Communications T4 Virtual Function Ethernet support" + depends on CHELSIO_T4VF_DEPENDS + help + This driver supports Chelsio T4-based gigabit and 10Gb Ethernet + adapters with PCI-E SR-IOV Virtual Functions. + + For general information about Chelsio and our products, visit + our website at <http://www.chelsio.com>. + + For customer support, please visit our customer support page at + <http://www.chelsio.com/support.htm>. + + Please send feedback to <linux-bugs@chelsio.com>. + + To compile this driver as a module choose M here; the module + will be called cxgb4vf. + config EHEA tristate "eHEA Ethernet support" depends on IBMEBUS && INET && SPARSEMEM @@ -2614,7 +2650,6 @@ config EHEA config ENIC tristate "Cisco VIC Ethernet NIC Support" depends on PCI && INET - select INET_LRO help This enables the support for the Cisco VIC Ethernet card. @@ -2834,6 +2869,20 @@ config QLGE To compile this driver as a module, choose M here: the module will be called qlge. +config BNA + tristate "Brocade 1010/1020 10Gb Ethernet Driver support" + depends on PCI + ---help--- + This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet + cards. + To compile this driver as a module, choose M here: the module + will be called bna. + + For general information and support, go to the Brocade support + website at: + + <http://support.brocade.com> + source "drivers/net/sfc/Kconfig" source "drivers/net/benet/Kconfig" @@ -3167,6 +3216,17 @@ config PPPOE which contains instruction on how to use this driver (under the heading "Kernel mode PPPoE"). +config PPTP + tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)" + depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX + help + Support for PPP over IPv4.(Point-to-Point Tunneling Protocol) + + This driver requires pppd plugin to work in client mode or + modified pptpd (poptop) to work in server mode. + See http://accel-pptp.sourceforge.net/ for information how to + utilize this module. + config PPPOATM tristate "PPP over ATM" depends on ATM && PPP |