diff options
Diffstat (limited to 'drivers/net/dsa/lantiq_gswip.c')
-rw-r--r-- | drivers/net/dsa/lantiq_gswip.c | 357 |
1 files changed, 305 insertions, 52 deletions
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c index 52e865a3912c..314ae78bbdd6 100644 --- a/drivers/net/dsa/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq_gswip.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Lantiq / Intel GSWIP switch driver for VRX200 SoCs + * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs * * Copyright (C) 2010 Lantiq Deutschland * Copyright (C) 2012 John Crispin <john@phrozen.org> @@ -93,13 +93,18 @@ /* GSWIP MII Registers */ #define GSWIP_MII_CFGp(p) (0x2 * (p)) +#define GSWIP_MII_CFG_RESET BIT(15) #define GSWIP_MII_CFG_EN BIT(14) +#define GSWIP_MII_CFG_ISOLATE BIT(13) #define GSWIP_MII_CFG_LDCLKDIS BIT(12) +#define GSWIP_MII_CFG_RGMII_IBS BIT(8) +#define GSWIP_MII_CFG_RMII_CLK BIT(7) #define GSWIP_MII_CFG_MODE_MIIP 0x0 #define GSWIP_MII_CFG_MODE_MIIM 0x1 #define GSWIP_MII_CFG_MODE_RMIIP 0x2 #define GSWIP_MII_CFG_MODE_RMIIM 0x3 #define GSWIP_MII_CFG_MODE_RGMII 0x4 +#define GSWIP_MII_CFG_MODE_GMII 0x9 #define GSWIP_MII_CFG_MODE_MASK 0xf #define GSWIP_MII_CFG_RATE_M2P5 0x00 #define GSWIP_MII_CFG_RATE_M25 0x10 @@ -190,6 +195,23 @@ #define GSWIP_PCE_DEFPVID(p) (0x486 + ((p) * 0xA)) #define GSWIP_MAC_FLEN 0x8C5 +#define GSWIP_MAC_CTRL_0p(p) (0x903 + ((p) * 0xC)) +#define GSWIP_MAC_CTRL_0_PADEN BIT(8) +#define GSWIP_MAC_CTRL_0_FCS_EN BIT(7) +#define GSWIP_MAC_CTRL_0_FCON_MASK 0x0070 +#define GSWIP_MAC_CTRL_0_FCON_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FCON_RX 0x0010 +#define GSWIP_MAC_CTRL_0_FCON_TX 0x0020 +#define GSWIP_MAC_CTRL_0_FCON_RXTX 0x0030 +#define GSWIP_MAC_CTRL_0_FCON_NONE 0x0040 +#define GSWIP_MAC_CTRL_0_FDUP_MASK 0x000C +#define GSWIP_MAC_CTRL_0_FDUP_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_FDUP_EN 0x0004 +#define GSWIP_MAC_CTRL_0_FDUP_DIS 0x000C +#define GSWIP_MAC_CTRL_0_GMII_MASK 0x0003 +#define GSWIP_MAC_CTRL_0_GMII_AUTO 0x0000 +#define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 +#define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 #define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) #define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ @@ -220,6 +242,7 @@ struct gswip_hw_info { int max_ports; int cpu_port; + const struct dsa_switch_ops *ops; }; struct xway_gphy_match_data { @@ -653,16 +676,13 @@ static int gswip_port_enable(struct dsa_switch *ds, int port, GSWIP_SDMA_PCTRLp(port)); if (!dsa_is_cpu_port(ds, port)) { - u32 macconf = GSWIP_MDIO_PHY_LINK_AUTO | - GSWIP_MDIO_PHY_SPEED_AUTO | - GSWIP_MDIO_PHY_FDUP_AUTO | - GSWIP_MDIO_PHY_FCONTX_AUTO | - GSWIP_MDIO_PHY_FCONRX_AUTO | - (phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK); - - gswip_mdio_w(priv, macconf, GSWIP_MDIO_PHYp(port)); - /* Activate MDIO auto polling */ - gswip_mdio_mask(priv, 0, BIT(port), GSWIP_MDIO_MDC_CFG0); + u32 mdio_phy = 0; + + if (phydev) + mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); } return 0; @@ -675,14 +695,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port) if (!dsa_is_user_port(ds, port)) return; - if (!dsa_is_cpu_port(ds, port)) { - gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_DOWN, - GSWIP_MDIO_PHY_LINK_MASK, - GSWIP_MDIO_PHYp(port)); - /* Deactivate MDIO auto polling */ - gswip_mdio_mask(priv, BIT(port), 0, GSWIP_MDIO_MDC_CFG0); - } - gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0, GSWIP_FDMA_PCTRLp(port)); gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0, @@ -794,14 +806,32 @@ static int gswip_setup(struct dsa_switch *ds) gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP2); gswip_switch_w(priv, BIT(cpu_port), GSWIP_PCE_PMAP3); - /* disable PHY auto polling */ + /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an + * interoperability problem with this auto polling mechanism because + * their status registers think that the link is in a different state + * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set + * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the + * auto polling state machine consider the link being negotiated with + * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads + * to the switch port being completely dead (RX and TX are both not + * working). + * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F + * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes + * it would work fine for a few minutes to hours and then stop, on + * other device it would no traffic could be sent or received at all. + * Testing shows that when PHY auto polling is disabled these problems + * go away. + */ gswip_mdio_w(priv, 0x0, GSWIP_MDIO_MDC_CFG0); + /* Configure the MDIO Clock 2.5 MHz */ gswip_mdio_mask(priv, 0xff, 0x09, GSWIP_MDIO_MDC_CFG1); - /* Disable the xMII link */ + /* Disable the xMII interface and clear it's isolation bit */ for (i = 0; i < priv->hw_info->max_ports; i++) - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, i); + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, + 0, i); /* enable special tag insertion on cpu port */ gswip_switch_mask(priv, 0, GSWIP_FDMA_PCTRL_STEN, @@ -1384,12 +1414,42 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, return 0; } -static void gswip_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) +static void gswip_phylink_set_capab(unsigned long *supported, + struct phylink_link_state *state) { __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + /* Allow all the expected bits */ + phylink_set(mask, Autoneg); + phylink_set_port_modes(mask); + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + /* With the exclusion of MII, Reverse MII and Reduced MII, we + * support Gigabit, including Half duplex + */ + if (state->interface != PHY_INTERFACE_MODE_MII && + state->interface != PHY_INTERFACE_MODE_REVMII && + state->interface != PHY_INTERFACE_MODE_RMII) { + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseT_Half); + } + + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + + bitmap_and(supported, supported, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ switch (port) { case 0: case 1: @@ -1416,38 +1476,160 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port, return; } - /* Allow all the expected bits */ - phylink_set(mask, Autoneg); - phylink_set_port_modes(mask); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); + gswip_phylink_set_capab(supported, state); - /* With the exclusion of MII, Reverse MII and Reduced MII, we - * support Gigabit, including Half duplex - */ - if (state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_REVMII && - state->interface != PHY_INTERFACE_MODE_RMII) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseT_Half); + return; + +unsupported: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(state->interface), port); +} + +static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + switch (port) { + case 0: + if (!phy_interface_mode_is_rgmii(state->interface) && + state->interface != PHY_INTERFACE_MODE_GMII && + state->interface != PHY_INTERFACE_MODE_RMII) + goto unsupported; + break; + case 1: + case 2: + case 3: + case 4: + if (state->interface != PHY_INTERFACE_MODE_INTERNAL) + goto unsupported; + break; + case 5: + if (!phy_interface_mode_is_rgmii(state->interface) && + state->interface != PHY_INTERFACE_MODE_INTERNAL && + state->interface != PHY_INTERFACE_MODE_RMII) + goto unsupported; + break; + default: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported port: %i\n", port); + return; } - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); + gswip_phylink_set_capab(supported, state); - bitmap_and(supported, supported, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); - bitmap_and(state->advertising, state->advertising, mask, - __ETHTOOL_LINK_MODE_MASK_NBITS); return; unsupported: bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", phy_modes(state->interface), port); - return; +} + +static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +{ + u32 mdio_phy; + + if (link) + mdio_phy = GSWIP_MDIO_PHY_LINK_UP; + else + mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_LINK_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); +} + +static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, + phy_interface_t interface) +{ + u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; + + switch (speed) { + case SPEED_10: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M2P5; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_100: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M25; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_1000: + mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; + + mii_cfg = GSWIP_MII_CFG_RATE_M125; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; + break; + } + + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); + gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0, + GSWIP_MAC_CTRL_0p(port)); +} + +static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) +{ + u32 mac_ctrl_0, mdio_phy; + + if (duplex == DUPLEX_FULL) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; + mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; + mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; + } + + gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0, + GSWIP_MAC_CTRL_0p(port)); + gswip_mdio_mask(priv, GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy, + GSWIP_MDIO_PHYp(port)); +} + +static void gswip_port_set_pause(struct gswip_priv *priv, int port, + bool tx_pause, bool rx_pause) +{ + u32 mac_ctrl_0, mdio_phy; + + if (tx_pause && rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_EN; + } else if (tx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_DIS; + } else if (rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_DIS; + } + + gswip_switch_mask(priv, GSWIP_MAC_CTRL_0_FCON_MASK, + mac_ctrl_0, GSWIP_MAC_CTRL_0p(port)); + gswip_mdio_mask(priv, + GSWIP_MDIO_PHY_FCONTX_MASK | + GSWIP_MDIO_PHY_FCONRX_MASK, + mdio_phy, GSWIP_MDIO_PHYp(port)); } static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, @@ -1469,6 +1651,9 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, break; case PHY_INTERFACE_MODE_RMII: miicfg |= GSWIP_MII_CFG_MODE_RMIIM; + + /* Configure the RMII clock as output: */ + miicfg |= GSWIP_MII_CFG_RMII_CLK; break; case PHY_INTERFACE_MODE_RGMII: case PHY_INTERFACE_MODE_RGMII_ID: @@ -1476,12 +1661,19 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port, case PHY_INTERFACE_MODE_RGMII_TXID: miicfg |= GSWIP_MII_CFG_MODE_RGMII; break; + case PHY_INTERFACE_MODE_GMII: + miicfg |= GSWIP_MII_CFG_MODE_GMII; + break; default: dev_err(ds->dev, "Unsupported interface: %d\n", state->interface); return; } - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_MODE_MASK, miicfg, port); + + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | + GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, + miicfg, port); switch (state->interface) { case PHY_INTERFACE_MODE_RGMII_ID: @@ -1506,6 +1698,9 @@ static void gswip_phylink_mac_link_down(struct dsa_switch *ds, int port, struct gswip_priv *priv = ds->priv; gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); + + if (!dsa_is_cpu_port(ds, port)) + gswip_port_set_link(priv, port, false); } static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, @@ -1517,6 +1712,13 @@ static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, { struct gswip_priv *priv = ds->priv; + if (!dsa_is_cpu_port(ds, port)) { + gswip_port_set_link(priv, port, true); + gswip_port_set_speed(priv, port, speed, interface); + gswip_port_set_duplex(priv, port, duplex); + gswip_port_set_pause(priv, port, tx_pause, rx_pause); + } + gswip_mii_mask_cfg(priv, 0, GSWIP_MII_CFG_EN, port); } @@ -1588,7 +1790,7 @@ static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(gswip_rmon_cnt); } -static const struct dsa_switch_ops gswip_switch_ops = { +static const struct dsa_switch_ops gswip_xrx200_switch_ops = { .get_tag_protocol = gswip_get_tag_protocol, .setup = gswip_setup, .port_enable = gswip_port_enable, @@ -1603,7 +1805,31 @@ static const struct dsa_switch_ops gswip_switch_ops = { .port_fdb_add = gswip_port_fdb_add, .port_fdb_del = gswip_port_fdb_del, .port_fdb_dump = gswip_port_fdb_dump, - .phylink_validate = gswip_phylink_validate, + .phylink_validate = gswip_xrx200_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, + .phylink_mac_link_up = gswip_phylink_mac_link_up, + .get_strings = gswip_get_strings, + .get_ethtool_stats = gswip_get_ethtool_stats, + .get_sset_count = gswip_get_sset_count, +}; + +static const struct dsa_switch_ops gswip_xrx300_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_enable = gswip_port_enable, + .port_disable = gswip_port_disable, + .port_bridge_join = gswip_port_bridge_join, + .port_bridge_leave = gswip_port_bridge_leave, + .port_fast_age = gswip_port_fast_age, + .port_vlan_filtering = gswip_port_vlan_filtering, + .port_vlan_add = gswip_port_vlan_add, + .port_vlan_del = gswip_port_vlan_del, + .port_stp_state_set = gswip_port_stp_state_set, + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, + .phylink_validate = gswip_xrx300_phylink_validate, .phylink_mac_config = gswip_phylink_mac_config, .phylink_mac_link_down = gswip_phylink_mac_link_down, .phylink_mac_link_up = gswip_phylink_mac_link_up, @@ -1832,7 +2058,7 @@ remove_gphy: static int gswip_probe(struct platform_device *pdev) { struct gswip_priv *priv; - struct device_node *mdio_np, *gphy_fw_np; + struct device_node *np, *mdio_np, *gphy_fw_np; struct device *dev = &pdev->dev; int err; int i; @@ -1865,10 +2091,28 @@ static int gswip_probe(struct platform_device *pdev) priv->ds->dev = dev; priv->ds->num_ports = priv->hw_info->max_ports; priv->ds->priv = priv; - priv->ds->ops = &gswip_switch_ops; + priv->ds->ops = priv->hw_info->ops; priv->dev = dev; version = gswip_switch_r(priv, GSWIP_VERSION); + np = dev->of_node; + switch (version) { + case GSWIP_VERSION_2_0: + case GSWIP_VERSION_2_1: + if (!of_device_is_compatible(np, "lantiq,xrx200-gswip")) + return -EINVAL; + break; + case GSWIP_VERSION_2_2: + case GSWIP_VERSION_2_2_ETC: + if (!of_device_is_compatible(np, "lantiq,xrx300-gswip") && + !of_device_is_compatible(np, "lantiq,xrx330-gswip")) + return -EINVAL; + break; + default: + dev_err(dev, "unknown GSWIP version: 0x%x", version); + return -ENOENT; + } + /* bring up the mdio bus */ gphy_fw_np = of_get_compatible_child(dev->of_node, "lantiq,gphy-fw"); if (gphy_fw_np) { @@ -1946,10 +2190,19 @@ static int gswip_remove(struct platform_device *pdev) static const struct gswip_hw_info gswip_xrx200 = { .max_ports = 7, .cpu_port = 6, + .ops = &gswip_xrx200_switch_ops, +}; + +static const struct gswip_hw_info gswip_xrx300 = { + .max_ports = 7, + .cpu_port = 6, + .ops = &gswip_xrx300_switch_ops, }; static const struct of_device_id gswip_of_match[] = { { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, + { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, + { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, {}, }; MODULE_DEVICE_TABLE(of, gswip_of_match); |