summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/microchip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/microchip')
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c97
-rw-r--r--drivers/net/dsa/microchip/ksz_common.h21
-rw-r--r--drivers/net/dsa/microchip/ksz_ptp.c26
-rw-r--r--drivers/net/dsa/microchip/ksz_ptp.h7
4 files changed, 129 insertions, 22 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index f95a9aac56ee..f492fa9f6dd4 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -4078,6 +4078,89 @@ static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p,
return p->bands - 1 - band;
}
+/**
+ * ksz88x3_tc_ets_add - Configure ETS (Enhanced Transmission Selection)
+ * for a port on KSZ88x3 switch
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number to configure
+ * @p: Pointer to offload replace parameters describing ETS bands and mapping
+ *
+ * The KSZ88x3 supports two scheduling modes: Strict Priority and
+ * Weighted Fair Queuing (WFQ). Both modes have fixed behavior:
+ * - No configurable queue-to-priority mapping
+ * - No weight adjustment in WFQ mode
+ *
+ * This function configures the switch to use strict priority mode by
+ * clearing the WFQ enable bit for all queues associated with ETS bands.
+ * If strict priority is not explicitly requested, the switch will default
+ * to WFQ mode.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_tc_ets_add(struct ksz_device *dev, int port,
+ struct tc_ets_qopt_offload_replace_params *p)
+{
+ int ret, band;
+
+ /* Only strict priority mode is supported for now.
+ * WFQ is implicitly enabled when strict mode is disabled.
+ */
+ for (band = 0; band < p->bands; band++) {
+ int queue = ksz_ets_band_to_queue(p, band);
+ u8 reg;
+
+ /* Calculate TXQ Split Control register address for this
+ * port/queue
+ */
+ reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue);
+
+ /* Clear WFQ enable bit to select strict priority scheduling */
+ ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz88x3_tc_ets_del - Reset ETS (Enhanced Transmission Selection) config
+ * for a port on KSZ88x3 switch
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number to reset
+ *
+ * The KSZ88x3 supports only fixed scheduling modes: Strict Priority or
+ * Weighted Fair Queuing (WFQ), with no reconfiguration of weights or
+ * queue mapping. This function resets the port’s scheduling mode to
+ * the default, which is WFQ, by enabling the WFQ bit for all queues.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_tc_ets_del(struct ksz_device *dev, int port)
+{
+ int ret, queue;
+
+ /* Iterate over all transmit queues for this port */
+ for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
+ u8 reg;
+
+ /* Calculate TXQ Split Control register address for this
+ * port/queue
+ */
+ reg = KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue);
+
+ /* Set WFQ enable bit to revert back to default scheduling
+ * mode
+ */
+ ret = ksz_rmw8(dev, reg, KSZ8873_TXQ_WFQ_ENABLE,
+ KSZ8873_TXQ_WFQ_ENABLE);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue)
{
int ret;
@@ -4159,6 +4242,7 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port)
for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
ret = ksz_queue_set_wrr(dev, port, queue,
KSZ9477_DEFAULT_WRR_WEIGHT);
+
if (ret)
return ret;
}
@@ -4211,7 +4295,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
struct ksz_device *dev = ds->priv;
int ret;
- if (is_ksz8(dev))
+ if (is_ksz8(dev) && !ksz_is_ksz88x3(dev))
return -EOPNOTSUPP;
if (qopt->parent != TC_H_ROOT) {
@@ -4225,9 +4309,16 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
if (ret)
return ret;
- return ksz_tc_ets_add(dev, port, &qopt->replace_params);
+ if (ksz_is_ksz88x3(dev))
+ return ksz88x3_tc_ets_add(dev, port,
+ &qopt->replace_params);
+ else
+ return ksz_tc_ets_add(dev, port, &qopt->replace_params);
case TC_ETS_DESTROY:
- return ksz_tc_ets_del(dev, port);
+ if (ksz_is_ksz88x3(dev))
+ return ksz88x3_tc_ets_del(dev, port);
+ else
+ return ksz_tc_ets_del(dev, port);
case TC_ETS_STATS:
case TC_ETS_GRAFT:
return -EOPNOTSUPP;
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index af17a9c030d4..a034017568cd 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -142,7 +142,7 @@ struct ksz_port {
struct ksz_irq pirq;
u8 num;
#if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP)
- struct hwtstamp_config tstamp_config;
+ struct kernel_hwtstamp_config tstamp_config;
bool hwts_tx_en;
bool hwts_rx_en;
struct ksz_irq ptpirq;
@@ -836,6 +836,25 @@ static inline bool is_lan937x_tx_phy(struct ksz_device *dev, int port)
#define SW_HI_SPEED_DRIVE_STRENGTH_S 4
#define SW_LO_SPEED_DRIVE_STRENGTH_S 0
+/* TXQ Split Control Register for per-port, per-queue configuration.
+ * Register 0xAF is TXQ Split for Q3 on Port 1.
+ * Register offset formula: 0xAF + (port * 4) + (3 - queue)
+ * where: port = 0..2, queue = 0..3
+ */
+#define KSZ8873_TXQ_SPLIT_CTRL_REG(port, queue) \
+ (0xAF + ((port) * 4) + (3 - (queue)))
+
+/* Bit 7 selects between:
+ * 0 = Strict priority mode (highest-priority queue first)
+ * 1 = Weighted Fair Queuing (WFQ) mode:
+ * Queue weights: Q3:Q2:Q1:Q0 = 8:4:2:1
+ * If any queues are empty, weight is redistributed.
+ *
+ * Note: This is referred to as "Weighted Fair Queuing" (WFQ) in KSZ8863/8873
+ * documentation, and as "Weighted Round Robin" (WRR) in KSZ9477 family docs.
+ */
+#define KSZ8873_TXQ_WFQ_ENABLE BIT(7)
+
#define KSZ9477_REG_PORT_OUT_RATE_0 0x0420
#define KSZ9477_OUT_RATE_NO_LIMIT 0
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index 22fb9ef4645c..bc54a96ba646 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -319,22 +319,21 @@ int ksz_get_ts_info(struct dsa_switch *ds, int port, struct kernel_ethtool_ts_in
return 0;
}
-int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr)
+int ksz_hwtstamp_get(struct dsa_switch *ds, int port,
+ struct kernel_hwtstamp_config *config)
{
struct ksz_device *dev = ds->priv;
- struct hwtstamp_config *config;
struct ksz_port *prt;
prt = &dev->ports[port];
- config = &prt->tstamp_config;
+ *config = prt->tstamp_config;
- return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ?
- -EFAULT : 0;
+ return 0;
}
static int ksz_set_hwtstamp_config(struct ksz_device *dev,
struct ksz_port *prt,
- struct hwtstamp_config *config)
+ struct kernel_hwtstamp_config *config)
{
int ret;
@@ -404,26 +403,21 @@ static int ksz_set_hwtstamp_config(struct ksz_device *dev,
return ksz_ptp_enable_mode(dev);
}
-int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr)
+int ksz_hwtstamp_set(struct dsa_switch *ds, int port,
+ struct kernel_hwtstamp_config *config,
+ struct netlink_ext_ack *extack)
{
struct ksz_device *dev = ds->priv;
- struct hwtstamp_config config;
struct ksz_port *prt;
int ret;
prt = &dev->ports[port];
- if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
- return -EFAULT;
-
- ret = ksz_set_hwtstamp_config(dev, prt, &config);
+ ret = ksz_set_hwtstamp_config(dev, prt, config);
if (ret)
return ret;
- memcpy(&prt->tstamp_config, &config, sizeof(config));
-
- if (copy_to_user(ifr->ifr_data, &config, sizeof(config)))
- return -EFAULT;
+ prt->tstamp_config = *config;
return 0;
}
diff --git a/drivers/net/dsa/microchip/ksz_ptp.h b/drivers/net/dsa/microchip/ksz_ptp.h
index 2f1783c0d723..3086e519b1b6 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.h
+++ b/drivers/net/dsa/microchip/ksz_ptp.h
@@ -39,8 +39,11 @@ void ksz_ptp_clock_unregister(struct dsa_switch *ds);
int ksz_get_ts_info(struct dsa_switch *ds, int port,
struct kernel_ethtool_ts_info *ts);
-int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr);
-int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr);
+int ksz_hwtstamp_get(struct dsa_switch *ds, int port,
+ struct kernel_hwtstamp_config *config);
+int ksz_hwtstamp_set(struct dsa_switch *ds, int port,
+ struct kernel_hwtstamp_config *config,
+ struct netlink_ext_ack *extack);
void ksz_port_txtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb);
void ksz_port_deferred_xmit(struct kthread_work *work);
bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb,
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-27 18:04:48 +0000