summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/ich8lan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c42
1 files changed, 20 insertions, 22 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 31277d3bb7dc..1dddfb7b2de6 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1367,9 +1367,6 @@ out:
* Checks to see of the link status of the hardware has changed. If a
* change in link status has been detected, then we read the PHY registers
* to get the current speed/duplex if link exists.
- *
- * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
- * up).
**/
static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
{
@@ -1385,7 +1382,8 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* Change or Rx Sequence Error interrupt.
*/
if (!mac->get_link_status)
- return 1;
+ return 0;
+ mac->get_link_status = false;
/* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
@@ -1393,12 +1391,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
if (ret_val)
- return ret_val;
+ goto out;
if (hw->mac.type == e1000_pchlan) {
ret_val = e1000_k1_gig_workaround_hv(hw, link);
if (ret_val)
- return ret_val;
+ goto out;
}
/* When connected at 10Mbps half-duplex, some parts are excessively
@@ -1431,7 +1429,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- return ret_val;
+ goto out;
if (hw->mac.type == e1000_pch2lan)
emi_addr = I82579_RX_CONFIG;
@@ -1453,7 +1451,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
hw->phy.ops.release(hw);
if (ret_val)
- return ret_val;
+ goto out;
if (hw->mac.type >= e1000_pch_spt) {
u16 data;
@@ -1462,14 +1460,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
if (speed == SPEED_1000) {
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- return ret_val;
+ goto out;
ret_val = e1e_rphy_locked(hw,
PHY_REG(776, 20),
&data);
if (ret_val) {
hw->phy.ops.release(hw);
- return ret_val;
+ goto out;
}
ptr_gap = (data & (0x3FF << 2)) >> 2;
@@ -1483,18 +1481,18 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
}
hw->phy.ops.release(hw);
if (ret_val)
- return ret_val;
+ goto out;
} else {
ret_val = hw->phy.ops.acquire(hw);
if (ret_val)
- return ret_val;
+ goto out;
ret_val = e1e_wphy_locked(hw,
PHY_REG(776, 20),
0xC023);
hw->phy.ops.release(hw);
if (ret_val)
- return ret_val;
+ goto out;
}
}
@@ -1521,7 +1519,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
(hw->adapter->pdev->device == E1000_DEV_ID_PCH_I218_V3)) {
ret_val = e1000_k1_workaround_lpt_lp(hw, link);
if (ret_val)
- return ret_val;
+ goto out;
}
if (hw->mac.type >= e1000_pch_lpt) {
/* Set platform power management values for
@@ -1529,7 +1527,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
*/
ret_val = e1000_platform_pm_pch_lpt(hw, link);
if (ret_val)
- return ret_val;
+ goto out;
}
/* Clear link partner's EEE ability */
@@ -1552,9 +1550,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
}
if (!link)
- return 0; /* No link detected */
-
- mac->get_link_status = false;
+ goto out;
switch (hw->mac.type) {
case e1000_pch2lan:
@@ -1616,12 +1612,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
* different link partner.
*/
ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
+ if (ret_val)
e_dbg("Error configuring flow control\n");
- return ret_val;
- }
- return 1;
+ return ret_val;
+
+out:
+ mac->get_link_status = true;
+ return ret_val;
}
static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)