summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_pf.c')
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_pf.c141
1 files changed, 26 insertions, 115 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
index 8cf943db5662..dc75507c9926 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -1,5 +1,5 @@
-/* Intel Ethernet Switch Host Interface Driver
- * Copyright(c) 2013 - 2015 Intel Corporation.
+/* Intel(R) Ethernet Switch Host Interface Driver
+ * Copyright(c) 2013 - 2016 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -219,8 +219,8 @@ static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
/* VLAN multi-bit write:
* The multi-bit write has several parts to it.
- * 3 2 1 0
- * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ * 24 16 8 0
+ * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | RSVD0 | Length |C|RSVD0| VLAN ID |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
@@ -488,6 +488,10 @@ static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort,
if (!fm10k_glort_valid_pf(hw, glort))
return FM10K_ERR_PARAM;
+ /* reset multicast mode if deleting lport */
+ if (!enable)
+ fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE);
+
/* construct the lport message from the 2 pieces of data we have */
lport_msg = ((u32)count << 16) | glort;
@@ -527,8 +531,8 @@ static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
return FM10K_ERR_PARAM;
/* determine count of VSIs and queues */
- queue_count = 1 << (dglort->rss_l + dglort->pc_l);
- vsi_count = 1 << (dglort->vsi_l + dglort->queue_l);
+ queue_count = BIT(dglort->rss_l + dglort->pc_l);
+ vsi_count = BIT(dglort->vsi_l + dglort->queue_l);
glort = dglort->glort;
q_idx = dglort->queue_b;
@@ -544,8 +548,8 @@ static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
}
/* determine count of PCs and queues */
- queue_count = 1 << (dglort->queue_l + dglort->rss_l + dglort->vsi_l);
- pc_count = 1 << dglort->pc_l;
+ queue_count = BIT(dglort->queue_l + dglort->rss_l + dglort->vsi_l);
+ pc_count = BIT(dglort->pc_l);
/* configure PC for Tx queues */
for (pc = 0; pc < pc_count; pc++) {
@@ -711,8 +715,8 @@ static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs,
FM10K_RXDCTL_WRITE_BACK_MIN_DELAY |
FM10K_RXDCTL_DROP_ON_EMPTY);
fm10k_write_reg(hw, FM10K_RXQCTL(vf_q_idx),
- FM10K_RXQCTL_VF |
- (i << FM10K_RXQCTL_VF_SHIFT));
+ (i << FM10K_RXQCTL_VF_SHIFT) |
+ FM10K_RXQCTL_VF);
/* map queue pair to VF */
fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
@@ -864,9 +868,13 @@ static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
- /* determine correct default VLAN ID */
+ /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is
+ * used here to indicate to the VF that it will not have privilege to
+ * write VLAN_TABLE. All policy is enforced on the PF but this allows
+ * the VF to correctly report errors to userspace rqeuests.
+ */
if (vf_info->pf_vid)
- vf_vid = vf_info->pf_vid | FM10K_VLAN_CLEAR;
+ vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE;
else
vf_vid = vf_info->sw_vid;
@@ -952,7 +960,7 @@ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
return FM10K_ERR_PARAM;
/* clear event notification of VF FLR */
- fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), 1 << (vf_idx % 32));
+ fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), BIT(vf_idx % 32));
/* force timeout and then disconnect the mailbox */
vf_info->mbx.timeout = 0;
@@ -987,7 +995,7 @@ static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) |
(vf_idx << FM10K_TXQCTL_TC_SHIFT) |
FM10K_TXQCTL_VF | vf_idx;
- rxqctl = FM10K_RXQCTL_VF | (vf_idx << FM10K_RXQCTL_VF_SHIFT);
+ rxqctl = (vf_idx << FM10K_RXQCTL_VF_SHIFT) | FM10K_RXQCTL_VF;
/* stop further DMA and reset queue ownership back to VF */
for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) {
@@ -1140,19 +1148,6 @@ static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw,
fm10k_update_hw_stats_q(hw, q, idx, qpp);
}
-static s32 fm10k_iov_report_timestamp_pf(struct fm10k_hw *hw,
- struct fm10k_vf_info *vf_info,
- u64 timestamp)
-{
- u32 msg[4];
-
- /* generate port state response to notify VF it is not ready */
- fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_1588);
- fm10k_tlv_attr_put_u64(msg, FM10K_1588_MSG_TIMESTAMP, timestamp);
-
- return vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
-}
-
/**
* fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF
* @hw: Pointer to hardware structure
@@ -1384,7 +1379,7 @@ s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results,
mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode);
/* if mode is not currently enabled, enable it */
- if (!(FM10K_VF_FLAG_ENABLED(vf_info) & (1 << mode)))
+ if (!(FM10K_VF_FLAG_ENABLED(vf_info) & BIT(mode)))
fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode);
/* swap mode back to a bit flag */
@@ -1618,7 +1613,7 @@ static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw)
* @hw: pointer to hardware structure
* @switch_ready: pointer to boolean value that will record switch state
*
- * This funciton will check the DMA_CTRL2 register and mailbox in order
+ * This function will check the DMA_CTRL2 register and mailbox in order
* to determine if the switch is ready for the PF to begin requesting
* addresses and mapping traffic to the local interface.
**/
@@ -1647,6 +1642,8 @@ out:
/* This structure defines the attibutes to be parsed below */
const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = {
+ FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+ sizeof(struct fm10k_swapi_error)),
FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP),
FM10K_TLV_ATTR_LAST
};
@@ -1787,89 +1784,6 @@ s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results,
return 0;
}
-const struct fm10k_tlv_attr fm10k_1588_timestamp_msg_attr[] = {
- FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_1588_TIMESTAMP,
- sizeof(struct fm10k_swapi_1588_timestamp)),
- FM10K_TLV_ATTR_LAST
-};
-
-/* currently there is no shared 1588 timestamp handler */
-
-/**
- * fm10k_adjust_systime_pf - Adjust systime frequency
- * @hw: pointer to hardware structure
- * @ppb: adjustment rate in parts per billion
- *
- * This function will adjust the SYSTIME_CFG register contained in BAR 4
- * if this function is supported for BAR 4 access. The adjustment amount
- * is based on the parts per billion value provided and adjusted to a
- * value based on parts per 2^48 clock cycles.
- *
- * If adjustment is not supported or the requested value is too large
- * we will return an error.
- **/
-static s32 fm10k_adjust_systime_pf(struct fm10k_hw *hw, s32 ppb)
-{
- u64 systime_adjust;
-
- /* if sw_addr is not set we don't have switch register access */
- if (!hw->sw_addr)
- return ppb ? FM10K_ERR_PARAM : 0;
-
- /* we must convert the value from parts per billion to parts per
- * 2^48 cycles. In addition I have opted to only use the 30 most
- * significant bits of the adjustment value as the 8 least
- * significant bits are located in another register and represent
- * a value significantly less than a part per billion, the result
- * of dropping the 8 least significant bits is that the adjustment
- * value is effectively multiplied by 2^8 when we write it.
- *
- * As a result of all this the math for this breaks down as follows:
- * ppb / 10^9 == adjust * 2^8 / 2^48
- * If we solve this for adjust, and simplify it comes out as:
- * ppb * 2^31 / 5^9 == adjust
- */
- systime_adjust = (ppb < 0) ? -ppb : ppb;
- systime_adjust <<= 31;
- do_div(systime_adjust, 1953125);
-
- /* verify the requested adjustment value is in range */
- if (systime_adjust > FM10K_SW_SYSTIME_ADJUST_MASK)
- return FM10K_ERR_PARAM;
-
- if (ppb > 0)
- systime_adjust |= FM10K_SW_SYSTIME_ADJUST_DIR_POSITIVE;
-
- fm10k_write_sw_reg(hw, FM10K_SW_SYSTIME_ADJUST, (u32)systime_adjust);
-
- return 0;
-}
-
-/**
- * fm10k_read_systime_pf - Reads value of systime registers
- * @hw: pointer to the hardware structure
- *
- * Function reads the content of 2 registers, combined to represent a 64 bit
- * value measured in nanosecods. In order to guarantee the value is accurate
- * we check the 32 most significant bits both before and after reading the
- * 32 least significant bits to verify they didn't change as we were reading
- * the registers.
- **/
-static u64 fm10k_read_systime_pf(struct fm10k_hw *hw)
-{
- u32 systime_l, systime_h, systime_tmp;
-
- systime_h = fm10k_read_reg(hw, FM10K_SYSTIME + 1);
-
- do {
- systime_tmp = systime_h;
- systime_l = fm10k_read_reg(hw, FM10K_SYSTIME);
- systime_h = fm10k_read_reg(hw, FM10K_SYSTIME + 1);
- } while (systime_tmp != systime_h);
-
- return ((u64)systime_h << 32) | systime_l;
-}
-
static const struct fm10k_msg_data fm10k_msg_data_pf[] = {
FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
@@ -1899,8 +1813,6 @@ static const struct fm10k_mac_ops mac_ops_pf = {
.set_dma_mask = fm10k_set_dma_mask_pf,
.get_fault = fm10k_get_fault_pf,
.get_host_state = fm10k_get_host_state_pf,
- .adjust_systime = fm10k_adjust_systime_pf,
- .read_systime = fm10k_read_systime_pf,
};
static const struct fm10k_iov_ops iov_ops_pf = {
@@ -1912,7 +1824,6 @@ static const struct fm10k_iov_ops iov_ops_pf = {
.set_lport = fm10k_iov_set_lport_pf,
.reset_lport = fm10k_iov_reset_lport_pf,
.update_stats = fm10k_iov_update_stats_pf,
- .report_timestamp = fm10k_iov_report_timestamp_pf,
};
static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw)