summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_main.c')
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c82
1 files changed, 61 insertions, 21 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 353deae139f9..c2d145a56b5e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6,6 +6,7 @@
#include <linux/pci.h>
#include <linux/bpf.h>
#include <generated/utsrelease.h>
+#include <linux/crash_dump.h>
/* Local includes */
#include "i40e.h"
@@ -2023,7 +2024,7 @@ static void i40e_undo_add_filter_entries(struct i40e_vsi *vsi,
}
/**
- * i40e_next_entry - Get the next non-broadcast filter from a list
+ * i40e_next_filter - Get the next non-broadcast filter from a list
* @next: pointer to filter in list
*
* Returns the next non-broadcast filter in the list. Required so that we
@@ -2560,8 +2561,7 @@ int i40e_sync_vsi_filters(struct i40e_vsi *vsi)
i40e_stat_str(hw, aq_ret),
i40e_aq_str(hw, hw->aq.asq_last_status));
} else {
- dev_info(&pf->pdev->dev, "%s is %s allmulti mode.\n",
- vsi->netdev->name,
+ dev_info(&pf->pdev->dev, "%s allmulti mode.\n",
cur_multipromisc ? "entering" : "leaving");
}
}
@@ -3259,6 +3259,17 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)
}
/**
+ * i40e_rx_offset - Return expected offset into page to access data
+ * @rx_ring: Ring we are requesting offset of
+ *
+ * Returns the offset value for ring into the data buffer.
+ */
+static unsigned int i40e_rx_offset(struct i40e_ring *rx_ring)
+{
+ return ring_uses_build_skb(rx_ring) ? I40E_SKB_PAD : 0;
+}
+
+/**
* i40e_configure_rx_ring - Configure a receive ring context
* @ring: The Rx ring to configure
*
@@ -3369,6 +3380,8 @@ static int i40e_configure_rx_ring(struct i40e_ring *ring)
else
set_ring_build_skb_enabled(ring);
+ ring->rx_offset = i40e_rx_offset(ring);
+
/* cache tail for quicker writes, and clear the reg before use */
ring->tail = hw->hw_addr + I40E_QRX_TAIL(pf_q);
writel(0, ring->tail);
@@ -5191,7 +5204,7 @@ static u8 i40e_pf_get_num_tc(struct i40e_pf *pf)
}
/**
- * i40e_pf_get_pf_tc_map - Get bitmap for enabled traffic classes
+ * i40e_pf_get_tc_map - Get bitmap for enabled traffic classes
* @pf: PF being queried
*
* Return a bitmap for enabled traffic classes for this PF.
@@ -6725,9 +6738,9 @@ out:
set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state);
set_bit(__I40E_CLIENT_L2_CHANGE, pf->state);
}
- /* registers are set, lets apply */
- if (pf->hw_features & I40E_HW_USE_SET_LLDP_MIB)
- ret = i40e_hw_set_dcb_config(pf, new_cfg);
+ /* registers are set, lets apply */
+ if (pf->hw_features & I40E_HW_USE_SET_LLDP_MIB)
+ ret = i40e_hw_set_dcb_config(pf, new_cfg);
}
err:
@@ -7326,7 +7339,7 @@ static void i40e_vsi_set_default_tc_config(struct i40e_vsi *vsi)
qcount = min_t(int, vsi->alloc_queue_pairs,
i40e_pf_get_max_q_per_tc(vsi->back));
for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
- /* For the TC that is not enabled set the offset to to default
+ /* For the TC that is not enabled set the offset to default
* queue and allocate one queue for the given TC.
*/
vsi->tc_config.tc_info[i].qoffset = 0;
@@ -9454,7 +9467,7 @@ static void i40e_fdir_flush_and_replay(struct i40e_pf *pf)
}
/**
- * i40e_get_current_atr_count - Get the count of total FD ATR filters programmed
+ * i40e_get_current_atr_cnt - Get the count of total FD ATR filters programmed
* @pf: board private structure
**/
u32 i40e_get_current_atr_cnt(struct i40e_pf *pf)
@@ -10560,12 +10573,6 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
goto end_core_reset;
}
- if (!lock_acquired)
- rtnl_lock();
- ret = i40e_setup_pf_switch(pf, reinit);
- if (ret)
- goto end_unlock;
-
#ifdef CONFIG_I40E_DCB
/* Enable FW to write a default DCB config on link-up
* unless I40E_FLAG_TC_MQPRIO was enabled or DCB
@@ -10580,7 +10587,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
i40e_aq_set_dcb_parameters(hw, false, NULL);
dev_warn(&pf->pdev->dev,
"DCB is not supported for X710-T*L 2.5/5G speeds\n");
- pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
+ pf->flags &= ~I40E_FLAG_DCB_CAPABLE;
} else {
i40e_aq_set_dcb_parameters(hw, true, NULL);
ret = i40e_init_pf_dcb(pf);
@@ -10594,6 +10601,11 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
}
#endif /* CONFIG_I40E_DCB */
+ if (!lock_acquired)
+ rtnl_lock();
+ ret = i40e_setup_pf_switch(pf, reinit);
+ if (ret)
+ goto end_unlock;
/* The driver only wants link up/down and module qualification
* reports from firmware. Note the negative logic.
@@ -10612,7 +10624,7 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
* need to rebuild the switch model in the HW.
*
* If there were VEBs but the reconstitution failed, we'll try
- * try to recover minimal use by getting the basic PF VSI working.
+ * to recover minimal use by getting the basic PF VSI working.
*/
if (vsi->uplink_seid != pf->mac_seid) {
dev_dbg(&pf->pdev->dev, "attempting to rebuild switch\n");
@@ -11028,6 +11040,11 @@ static int i40e_set_num_rings_in_vsi(struct i40e_vsi *vsi)
return -ENODATA;
}
+ if (is_kdump_kernel()) {
+ vsi->num_tx_desc = I40E_MIN_NUM_DESCRIPTORS;
+ vsi->num_rx_desc = I40E_MIN_NUM_DESCRIPTORS;
+ }
+
return 0;
}
@@ -12346,6 +12363,7 @@ static int i40e_sw_init(struct i40e_pf *pf)
{
int err = 0;
int size;
+ u16 pow;
/* Set default capability flags */
pf->flags = I40E_FLAG_RX_CSUM_ENABLED |
@@ -12364,6 +12382,11 @@ static int i40e_sw_init(struct i40e_pf *pf)
pf->rss_table_size = pf->hw.func_caps.rss_table_size;
pf->rss_size_max = min_t(int, pf->rss_size_max,
pf->hw.func_caps.num_tx_qp);
+
+ /* find the next higher power-of-2 of num cpus */
+ pow = roundup_pow_of_two(num_online_cpus());
+ pf->rss_size_max = min_t(int, pf->rss_size_max, pow);
+
if (pf->hw.func_caps.rss) {
pf->flags |= I40E_FLAG_RSS_ENABLED;
pf->alloc_rss_size = min_t(int, pf->rss_size_max,
@@ -15127,12 +15150,16 @@ static int i40e_init_recovery_mode(struct i40e_pf *pf, struct i40e_hw *hw)
* in order to register the netdev
*/
v_idx = i40e_vsi_mem_alloc(pf, I40E_VSI_MAIN);
- if (v_idx < 0)
+ if (v_idx < 0) {
+ err = v_idx;
goto err_switch_setup;
+ }
pf->lan_vsi = v_idx;
vsi = pf->vsi[v_idx];
- if (!vsi)
+ if (!vsi) {
+ err = -EFAULT;
goto err_switch_setup;
+ }
vsi->alloc_queue_pairs = 1;
err = i40e_config_netdev(vsi);
if (err)
@@ -15321,8 +15348,13 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
i40e_check_recovery_mode(pf);
- hw->aq.num_arq_entries = I40E_AQ_LEN;
- hw->aq.num_asq_entries = I40E_AQ_LEN;
+ if (is_kdump_kernel()) {
+ hw->aq.num_arq_entries = I40E_MIN_ARQ_LEN;
+ hw->aq.num_asq_entries = I40E_MIN_ASQ_LEN;
+ } else {
+ hw->aq.num_arq_entries = I40E_AQ_LEN;
+ hw->aq.num_asq_entries = I40E_AQ_LEN;
+ }
hw->aq.arq_buf_size = I40E_MAX_AQ_BUF_SIZE;
hw->aq.asq_buf_size = I40E_MAX_AQ_BUF_SIZE;
pf->adminq_work_limit = I40E_AQ_WORK_LIMIT;
@@ -15485,6 +15517,14 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err)
goto err_switch_setup;
+ /* Reduce Tx and Rx pairs for kdump
+ * When MSI-X is enabled, it's not allowed to use more TC queue
+ * pairs than MSI-X vectors (pf->num_lan_msix) exist. Thus
+ * vsi->num_queue_pairs will be equal to pf->num_lan_msix, i.e., 1.
+ */
+ if (is_kdump_kernel())
+ pf->num_lan_msix = 1;
+
pf->udp_tunnel_nic.set_port = i40e_udp_tunnel_set_port;
pf->udp_tunnel_nic.unset_port = i40e_udp_tunnel_unset_port;
pf->udp_tunnel_nic.flags = UDP_TUNNEL_NIC_INFO_MAY_SLEEP;
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-17 07:31:16 +0000