summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mediatek/mtk_sgmii.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/mediatek/mtk_sgmii.c')
-rw-r--r--drivers/net/ethernet/mediatek/mtk_sgmii.c46
1 files changed, 32 insertions, 14 deletions
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 5c286f2c9418..bb00de1003ac 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -43,11 +43,6 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
int advertise, link_timer;
bool changed, use_an;
- if (interface == PHY_INTERFACE_MODE_2500BASEX)
- rgc3 = RG_PHY_SPEED_3_125G;
- else
- rgc3 = 0;
-
advertise = phylink_mii_c22_pcs_encode_advertisement(interface,
advertising);
if (advertise < 0)
@@ -88,9 +83,22 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
bmcr = 0;
}
- /* Configure the underlying interface speed */
- regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
- RG_PHY_SPEED_3_125G, rgc3);
+ if (mpcs->interface != interface) {
+ /* PHYA power down */
+ regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
+ SGMII_PHYA_PWD, SGMII_PHYA_PWD);
+
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
+ rgc3 = RG_PHY_SPEED_3_125G;
+ else
+ rgc3 = 0;
+
+ /* Configure the underlying interface speed */
+ regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3,
+ RG_PHY_SPEED_3_125G, rgc3);
+
+ mpcs->interface = interface;
+ }
/* Update the advertisement, noting whether it has changed */
regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE,
@@ -108,9 +116,17 @@ static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1,
SGMII_AN_RESTART | SGMII_AN_ENABLE, bmcr);
- /* Release PHYA power down state */
- regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL,
- SGMII_PHYA_PWD, 0);
+ /* Release PHYA power down state
+ * Only removing bit SGMII_PHYA_PWD isn't enough.
+ * There are cases when the SGMII_PHYA_PWD register contains 0x9 which
+ * prevents SGMII from working. The SGMII still shows link but no traffic
+ * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was
+ * taken from a good working state of the SGMII interface.
+ * Unknown how much the QPHY needs but it is racy without a sleep.
+ * Tested on mt7622 & mt7986.
+ */
+ usleep_range(50, 100);
+ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0);
return changed;
}
@@ -138,11 +154,11 @@ static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
else
sgm_mode = SGMII_SPEED_1000;
- if (duplex == DUPLEX_FULL)
- sgm_mode |= SGMII_DUPLEX_FULL;
+ if (duplex != DUPLEX_FULL)
+ sgm_mode |= SGMII_DUPLEX_HALF;
regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE,
- SGMII_DUPLEX_FULL | SGMII_SPEED_MASK,
+ SGMII_DUPLEX_HALF | SGMII_SPEED_MASK,
sgm_mode);
}
}
@@ -171,6 +187,8 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
return PTR_ERR(ss->pcs[i].regmap);
ss->pcs[i].pcs.ops = &mtk_pcs_ops;
+ ss->pcs[i].pcs.poll = true;
+ ss->pcs[i].interface = PHY_INTERFACE_MODE_NA;
}
return 0;