diff options
Diffstat (limited to 'drivers/net/ethernet')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 |
3 files changed, 15 insertions, 11 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c index 318ae9f10104..99b8040af592 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c @@ -89,20 +89,20 @@ static void dwmac1000_dma_init(void __iomem *ioaddr, u32 dma_tx, u32 dma_rx, int atds) { u32 value = readl(ioaddr + DMA_BUS_MODE); + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; /* * Set the DMA PBL (Programmable Burst Length) mode. * * Note: before stmmac core 3.50 this mode bit was 4xPBL, and * post 3.5 mode bit acts as 8*PBL. - * - * This configuration doesn't take care about the Separate PBL - * so only the bits: 13-8 are programmed with the PBL passed from the - * platform. */ value |= DMA_BUS_MODE_MAXPBL; - value &= ~DMA_BUS_MODE_PBL_MASK; - value |= (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT); + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); /* Set the Fixed burst mode */ if (dma_cfg->fixed_burst) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 7d82a3464097..2c3b2098f350 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -71,11 +71,14 @@ static void dwmac4_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi) writel(value, ioaddr + DMA_SYS_BUS_MODE); } -static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl, +static void dwmac4_dma_init_channel(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, u32 dma_tx_phy, u32 dma_rx_phy, u32 channel) { u32 value; + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; /* set PBL for each channels. Currently we affect same configuration * on each channel @@ -85,11 +88,11 @@ static void dwmac4_dma_init_channel(void __iomem *ioaddr, int pbl, writel(value, ioaddr + DMA_CHAN_CONTROL(channel)); value = readl(ioaddr + DMA_CHAN_TX_CONTROL(channel)); - value = value | (pbl << DMA_BUS_MODE_PBL_SHIFT); + value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT); writel(value, ioaddr + DMA_CHAN_TX_CONTROL(channel)); value = readl(ioaddr + DMA_CHAN_RX_CONTROL(channel)); - value = value | (pbl << DMA_BUS_MODE_RPBL_SHIFT); + value = value | (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); writel(value, ioaddr + DMA_CHAN_RX_CONTROL(channel)); /* Mask interrupts by writing to CSR7 */ @@ -120,8 +123,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr, writel(value, ioaddr + DMA_SYS_BUS_MODE); for (i = 0; i < DMA_CHANNEL_NB_MAX; i++) - dwmac4_dma_init_channel(ioaddr, dma_cfg->pbl, - dma_tx, dma_rx, i); + dwmac4_dma_init_channel(ioaddr, dma_cfg, dma_tx, dma_rx, i); } static void _dwmac4_dump_dma_regs(void __iomem *ioaddr, u32 channel) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 81800f23a9c4..96afe0561c99 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -315,6 +315,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl); if (!dma_cfg->pbl) dma_cfg->pbl = DEFAULT_DMA_PBL; + of_property_read_u32(np, "snps,txpbl", &dma_cfg->txpbl); + of_property_read_u32(np, "snps,rxpbl", &dma_cfg->rxpbl); dma_cfg->aal = of_property_read_bool(np, "snps,aal"); dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst"); |