diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 94 |
1 files changed, 11 insertions, 83 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 0bd8fbb5bfd0..e34643eef162 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -56,9 +56,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, bool autoneg_wait_to_complete); -static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg); static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg, @@ -174,7 +171,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { mac->ops.setup_link = &ixgbe_setup_copper_link_82599; mac->ops.get_link_capabilities = - &ixgbe_get_copper_link_capabilities_82599; + &ixgbe_get_copper_link_capabilities_generic; } /* Set necessary function pointers based on phy type */ @@ -184,6 +181,10 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) phy->ops.get_firmware_version = &ixgbe_get_phy_firmware_version_tnx; break; + case ixgbe_phy_aq: + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_generic; + break; default: break; } @@ -290,37 +291,6 @@ out: } /** - * ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @autoneg: boolean auto-negotiation value - * - * Determines the link capabilities by reading the AUTOC register. - **/ -static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) -{ - s32 status = IXGBE_ERR_LINK_SETUP; - u16 speed_ability; - - *speed = 0; - *autoneg = true; - - status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, - &speed_ability); - - if (status == 0) { - if (speed_ability & MDIO_SPEED_10G) - *speed |= IXGBE_LINK_SPEED_10GB_FULL; - if (speed_ability & MDIO_PMA_SPEED_1000) - *speed |= IXGBE_LINK_SPEED_1GB_FULL; - } - - return status; -} - -/** * ixgbe_get_media_type_82599 - Get media type * @hw: pointer to hardware structure * @@ -332,7 +302,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) /* Detect if there is a copper PHY attached. */ if (hw->phy.type == ixgbe_phy_cu_unknown || - hw->phy.type == ixgbe_phy_tn) { + hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq) { media_type = ixgbe_media_type_copper; goto out; } @@ -1924,6 +1895,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) hw->phy.ops.identify(hw); if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq || hw->phy.type == ixgbe_phy_cu_unknown) { hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, &ext_ability); @@ -2125,51 +2097,6 @@ fw_version_out: return status; } -/** - * ixgbe_get_wwn_prefix_82599 - Get alternative WWNN/WWPN prefix from - * the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix - * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. - **/ -static s32 ixgbe_get_wwn_prefix_82599(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix) -{ - u16 offset, caps; - u16 alt_san_mac_blk_offset; - - /* clear output first */ - *wwnn_prefix = 0xFFFF; - *wwpn_prefix = 0xFFFF; - - /* check if alternative SAN MAC is supported */ - hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, - &alt_san_mac_blk_offset); - - if ((alt_san_mac_blk_offset == 0) || - (alt_san_mac_blk_offset == 0xFFFF)) - goto wwn_prefix_out; - - /* check capability in alternative san mac address block */ - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; - hw->eeprom.ops.read(hw, offset, &caps); - if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) - goto wwn_prefix_out; - - /* get the corresponding prefix for WWNN/WWPN */ - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwnn_prefix); - - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwpn_prefix); - -wwn_prefix_out: - return 0; -} - static struct ixgbe_mac_operations mac_ops_82599 = { .init_hw = &ixgbe_init_hw_generic, .reset_hw = &ixgbe_reset_hw_82599, @@ -2181,7 +2108,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = { .get_mac_addr = &ixgbe_get_mac_addr_generic, .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, .get_device_caps = &ixgbe_get_device_caps_82599, - .get_wwn_prefix = &ixgbe_get_wwn_prefix_82599, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, .stop_adapter = &ixgbe_stop_adapter_generic, .get_bus_info = &ixgbe_get_bus_info_generic, .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, @@ -2214,6 +2141,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = { .init_params = &ixgbe_init_eeprom_params_generic, .read = &ixgbe_read_eerd_generic, .write = &ixgbe_write_eeprom_generic, + .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, .update_checksum = &ixgbe_update_eeprom_checksum_generic, }; @@ -2240,5 +2168,5 @@ struct ixgbe_info ixgbe_82599_info = { .mac_ops = &mac_ops_82599, .eeprom_ops = &eeprom_ops_82599, .phy_ops = &phy_ops_82599, - .mbx_ops = &mbx_ops_82599, + .mbx_ops = &mbx_ops_generic, }; |