1 files changed, 182 insertions, 73 deletions

diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 29771fbaa42d..23be4dbac7ed 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -100,6 +100,9 @@ s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 
 	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
 		ixgbe_init_mac_link_ops_82599(hw);
+
+		hw->phy.ops.reset = NULL;
+
 		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
 		                                              &data_offset);
 
@@ -146,51 +149,60 @@ u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw)
 static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	struct ixgbe_phy_info *phy = &hw->phy;
-	s32 ret_val;
 
-	/* Set the bus information prior to PHY identification */
-	mac->ops.get_bus_info(hw);
+	ixgbe_init_mac_link_ops_82599(hw);
 
-	/* Call PHY identify routine to get the Cu or SFI phy type */
-	ret_val = phy->ops.identify(hw);
+	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
 
-	if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED)
-		goto get_invariants_out;
+	return 0;
+}
 
-	ixgbe_init_mac_link_ops_82599(hw);
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
 
-	/* Setup SFP module if there is one present. */
-	ret_val = mac->ops.setup_sfp(hw);
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
 
 	/* If copper media, overwrite with copper function pointers */
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
 		mac->ops.setup_link_speed =
-		                  &ixgbe_setup_copper_link_speed_82599;
+		                     &ixgbe_setup_copper_link_speed_82599;
 		mac->ops.get_link_capabilities =
 		                  &ixgbe_get_copper_link_capabilities_82599;
 	}
 
-	/* PHY Init */
+	/* Set necessary function pointers based on phy type */
 	switch (hw->phy.type) {
 	case ixgbe_phy_tn:
 		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 		phy->ops.get_firmware_version =
-		                  &ixgbe_get_phy_firmware_version_tnx;
+		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
 	default:
 		break;
 	}
 
-	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
-	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
-	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
-	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
-	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
-	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw);
-
-get_invariants_out:
 	return ret_val;
 }
 
@@ -207,8 +219,19 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
                                       bool *negotiation)
 {
 	s32 status = 0;
+	u32 autoc = 0;
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 
-	switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
 	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
 		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = false;
@@ -232,22 +255,22 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 	case IXGBE_AUTOC_LMS_KX4_KX_KR:
 	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = true;
 		break;
 
 	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
 		*speed = IXGBE_LINK_SPEED_100_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
 			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 		*negotiation = true;
 		break;
@@ -291,14 +314,13 @@ static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
 	*speed = 0;
 	*autoneg = true;
 
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
-	                              IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
 	                              &speed_ability);
 
 	if (status == 0) {
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		if (speed_ability & MDIO_SPEED_10G)
 		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		if (speed_ability & MDIO_PMA_SPEED_1000)
 		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
 	}
 
@@ -558,6 +580,7 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 	s32 status = 0;
 	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 orig_autoc = 0;
 	u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
 	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
@@ -569,6 +592,13 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 	hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
 	speed &= link_capabilities;
 
+	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+	if (hw->mac.orig_link_settings_stored)
+		orig_autoc = hw->mac.orig_autoc;
+	else
+		orig_autoc = autoc;
+
+
 	if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
 		status = IXGBE_ERR_LINK_SETUP;
 	} else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
@@ -577,9 +607,9 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
 		/* Set KX4/KX/KR support according to speed requested */
 		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
 		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
-			if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
 				autoc |= IXGBE_AUTOC_KX4_SUPP;
-			if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+			if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
 				autoc |= IXGBE_AUTOC_KR_SUPP;
 		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 			autoc |= IXGBE_AUTOC_KX_SUPP;
@@ -705,14 +735,30 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 	/* Call adapter stop to disable tx/rx and clear interrupts */
 	hw->mac.ops.stop_adapter(hw);
 
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Init PHY and function pointers, perform SFP setup */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
 	/* Reset PHY */
-	hw->phy.ops.reset(hw);
+	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+		hw->phy.ops.reset(hw);
 
 	/*
 	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
 	 * access and verify no pending requests before reset
 	 */
-	if (ixgbe_disable_pcie_master(hw) != 0) {
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
 		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
 		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
 	}
@@ -773,6 +819,7 @@ s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 	/* Store the permanent mac address */
 	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
 
+reset_hw_out:
 	return status;
 }
 
@@ -1093,53 +1140,98 @@ s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
 u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 {
 	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
 	u8 comp_codes_10g = 0;
 
-	switch (hw->device_id) {
-	case IXGBE_DEV_ID_82599:
-	case IXGBE_DEV_ID_82599_KX4:
-		/* Default device ID is mezzanine card KX/KX4 */
-		physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
-		                  IXGBE_PHYSICAL_LAYER_1000BASE_KX);
+	hw->phy.ops.identify(hw);
+
+	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_cu_unknown) {
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+				     &ext_ability);
+		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+			goto out;
+		} else
+			/* SFI mode so read SFP module */
+			goto sfp_check;
 		break;
-	case IXGBE_DEV_ID_82599_SFP:
-		hw->phy.ops.identify_sfp(hw);
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		goto out;
+		break;
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+			goto out;
+		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+		goto out;
+		break;
+	default:
+		goto out;
+		break;
+	}
 
-		switch (hw->phy.sfp_type) {
-		case ixgbe_sfp_type_da_cu:
-		case ixgbe_sfp_type_da_cu_core0:
-		case ixgbe_sfp_type_da_cu_core1:
-			physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
-			break;
-		case ixgbe_sfp_type_sr:
+sfp_check:
+	/* SFP check must be done last since DA modules are sometimes used to
+	 * test KR mode -  we need to id KR mode correctly before SFP module.
+	 * Call identify_sfp because the pluggable module may have changed */
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		goto out;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tw_tyco:
+	case ixgbe_phy_tw_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			break;
-		case ixgbe_sfp_type_lr:
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
 			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			break;
-		case ixgbe_sfp_type_srlr_core0:
-		case ixgbe_sfp_type_srlr_core1:
-			hw->phy.ops.read_i2c_eeprom(hw,
-			                            IXGBE_SFF_10GBE_COMP_CODES,
-			                            &comp_codes_10g);
-			if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_SR;
-			else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
-				physical_layer =
-				                IXGBE_PHYSICAL_LAYER_10GBASE_LR;
-			else
-				physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-		default:
-			physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
-			break;
-		}
 		break;
 	default:
-		physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
 		break;
 	}
 
+out:
 	return physical_layer;
 }
 
@@ -1187,6 +1279,21 @@ s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
 	return 0;
 }
 
+/**
+ *  ixgbe_get_device_caps_82599 - Get additional device capabilities
+ *  @hw: pointer to hardware structure
+ *  @device_caps: the EEPROM word with the extra device capabilities
+ *
+ *  This function will read the EEPROM location for the device capabilities,
+ *  and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps)
+{
+	hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+	return 0;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -1196,6 +1303,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
 	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_device_caps        = &ixgbe_get_device_caps_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
@@ -1236,6 +1344,7 @@ static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 static struct ixgbe_phy_operations phy_ops_82599 = {
 	.identify               = &ixgbe_identify_phy_82599,
 	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82599,
 	.reset                  = &ixgbe_reset_phy_generic,
 	.read_reg               = &ixgbe_read_phy_reg_generic,
 	.write_reg              = &ixgbe_write_phy_reg_generic,