summaryrefslogtreecommitdiff
path: root/drivers/net/pcmcia/axnet_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/pcmcia/axnet_cs.c')
-rw-r--r--drivers/net/pcmcia/axnet_cs.c87
1 files changed, 15 insertions, 72 deletions
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 5f05ffb240cc..9e8b28b271ae 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -39,7 +39,6 @@
#include <linux/mii.h>
#include "../8390.h"
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
@@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*======================================================================
-
- axnet_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
-======================================================================*/
-
static int axnet_probe(struct pcmcia_device *link)
{
axnet_dev_t *info;
@@ -166,8 +157,7 @@ static int axnet_probe(struct pcmcia_device *link)
info = PRIV(dev);
info->p_dev = link;
link->priv = dev;
- link->conf.Attributes = CONF_ENABLE_IRQ;
- link->conf.IntType = INT_MEMORY_AND_IO;
+ link->config_flags |= CONF_ENABLE_IRQ;
dev->netdev_ops = &axnet_netdev_ops;
@@ -177,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link)
return axnet_config(link);
} /* axnet_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
-======================================================================*/
-
static void axnet_detach(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -231,7 +212,7 @@ static int get_prom(struct pcmcia_device *link)
};
/* Not much of a test, but the alternatives are messy */
- if (link->conf.ConfigBase != 0x03c0)
+ if (link->config_base != 0x03c0)
return 0;
axnet_reset_8390(dev);
@@ -248,14 +229,6 @@ static int get_prom(struct pcmcia_device *link)
return 1;
} /* get_prom */
-/*======================================================================
-
- axnet_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-
-======================================================================*/
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
@@ -286,35 +259,16 @@ static int try_io_port(struct pcmcia_device *link)
}
}
-static int axnet_configcheck(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- unsigned int vcc,
- void *priv_data)
+static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
- int i;
- cistpl_io_t *io = &cfg->io;
+ if (p_dev->config_index == 0)
+ return -EINVAL;
- if (cfg->index == 0 || cfg->io.nwin == 0)
+ p_dev->config_index = 0x05;
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
return -ENODEV;
- p_dev->conf.ConfigIndex = 0x05;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- p_dev->resource[1]->start = io->win[1-i].base;
- p_dev->resource[1]->end = io->win[1-i].len;
- } else {
- i = p_dev->resource[1]->end = 0;
- }
- p_dev->resource[0]->start = io->win[i].base;
- p_dev->resource[0]->end = io->win[i].len;
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
- return try_io_port(p_dev);
-
- return -ENODEV;
+ return try_io_port(p_dev);
}
static int axnet_config(struct pcmcia_device *link)
@@ -326,20 +280,19 @@ static int axnet_config(struct pcmcia_device *link)
dev_dbg(&link->dev, "axnet_config(0x%p)\n", link);
/* don't trust the CIS on this; Linksys got it wrong */
- link->conf.Present = 0x63;
+ link->config_regs = 0x63;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
if (ret != 0)
goto failed;
if (!link->irq)
goto failed;
+
+ if (resource_size(link->resource[1]) == 8)
+ link->config_flags |= CONF_ENABLE_SPKR;
- if (resource_size(link->resource[1]) == 8) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -414,14 +367,6 @@ failed:
return -ENODEV;
} /* axnet_config */
-/*======================================================================
-
- After a card is removed, axnet_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
-======================================================================*/
-
static void axnet_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);
@@ -783,9 +728,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids);
static struct pcmcia_driver axnet_cs_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "axnet_cs",
- },
+ .name = "axnet_cs",
.probe = axnet_probe,
.remove = axnet_detach,
.id_table = axnet_ids,