summaryrefslogtreecommitdiff
path: root/drivers/net/phy/micrel.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/micrel.c')
-rw-r--r--drivers/net/phy/micrel.c115
1 files changed, 107 insertions, 8 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 13e30ea7eec5..5aada7cf3da7 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -866,6 +866,17 @@ static int ksz8061_config_init(struct phy_device *phydev)
{
int ret;
+ /* Chip can be powered down by the bootstrap code. */
+ ret = phy_read(phydev, MII_BMCR);
+ if (ret < 0)
+ return ret;
+ if (ret & BMCR_PDOWN) {
+ ret = phy_write(phydev, MII_BMCR, ret & ~BMCR_PDOWN);
+ if (ret < 0)
+ return ret;
+ usleep_range(1000, 2000);
+ }
+
ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
if (ret)
return ret;
@@ -1939,7 +1950,7 @@ static const struct ksz9477_errata_write ksz9477_errata_writes[] = {
{0x1c, 0x20, 0xeeee},
};
-static int ksz9477_config_init(struct phy_device *phydev)
+static int ksz9477_phy_errata(struct phy_device *phydev)
{
int err;
int i;
@@ -1967,16 +1978,30 @@ static int ksz9477_config_init(struct phy_device *phydev)
return err;
}
+ err = genphy_restart_aneg(phydev);
+ if (err)
+ return err;
+
+ return err;
+}
+
+static int ksz9477_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Only KSZ9897 family of switches needs this fix. */
+ if ((phydev->phy_id & 0xf) == 1) {
+ err = ksz9477_phy_errata(phydev);
+ if (err)
+ return err;
+ }
+
/* According to KSZ9477 Errata DS80000754C (Module 4) all EEE modes
* in this switch shall be regarded as broken.
*/
if (phydev->dev_flags & MICREL_NO_EEE)
phydev->eee_broken_modes = -1;
- err = genphy_restart_aneg(phydev);
- if (err)
- return err;
-
return kszphy_config_init(phydev);
}
@@ -2085,6 +2110,71 @@ static int kszphy_resume(struct phy_device *phydev)
return 0;
}
+static int ksz9477_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* No need to initialize registers if not powered down. */
+ ret = phy_read(phydev, MII_BMCR);
+ if (ret < 0)
+ return ret;
+ if (!(ret & BMCR_PDOWN))
+ return 0;
+
+ genphy_resume(phydev);
+
+ /* After switching from power-down to normal mode, an internal global
+ * reset is automatically generated. Wait a minimum of 1 ms before
+ * read/write access to the PHY registers.
+ */
+ usleep_range(1000, 2000);
+
+ /* Only KSZ9897 family of switches needs this fix. */
+ if ((phydev->phy_id & 0xf) == 1) {
+ ret = ksz9477_phy_errata(phydev);
+ if (ret)
+ return ret;
+ }
+
+ /* Enable PHY Interrupts */
+ if (phy_interrupt_is_valid(phydev)) {
+ phydev->interrupts = PHY_INTERRUPT_ENABLED;
+ if (phydev->drv->config_intr)
+ phydev->drv->config_intr(phydev);
+ }
+
+ return 0;
+}
+
+static int ksz8061_resume(struct phy_device *phydev)
+{
+ int ret;
+
+ /* This function can be called twice when the Ethernet device is on. */
+ ret = phy_read(phydev, MII_BMCR);
+ if (ret < 0)
+ return ret;
+ if (!(ret & BMCR_PDOWN))
+ return 0;
+
+ genphy_resume(phydev);
+ usleep_range(1000, 2000);
+
+ /* Re-program the value after chip is reset. */
+ ret = phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_DEVID1, 0xB61A);
+ if (ret)
+ return ret;
+
+ /* Enable PHY Interrupts */
+ if (phy_interrupt_is_valid(phydev)) {
+ phydev->interrupts = PHY_INTERRUPT_ENABLED;
+ if (phydev->drv->config_intr)
+ phydev->drv->config_intr(phydev);
+ }
+
+ return 0;
+}
+
static int kszphy_probe(struct phy_device *phydev)
{
const struct kszphy_type *type = phydev->drv->driver_data;
@@ -4029,7 +4119,7 @@ static int lan8841_config_intr(struct phy_device *phydev)
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
err = phy_read(phydev, LAN8814_INTS);
- if (err)
+ if (err < 0)
return err;
/* Enable / disable interrupts. It is OK to enable PTP interrupt
@@ -4045,6 +4135,14 @@ static int lan8841_config_intr(struct phy_device *phydev)
return err;
err = phy_read(phydev, LAN8814_INTS);
+ if (err < 0)
+ return err;
+
+ /* Getting a positive value doesn't mean that is an error, it
+ * just indicates what was the status. Therefore make sure to
+ * clear the value and say that there is no error.
+ */
+ err = 0;
}
return err;
@@ -5327,10 +5425,11 @@ static struct phy_driver ksphy_driver[] = {
/* PHY_BASIC_FEATURES */
.probe = kszphy_probe,
.config_init = ksz8061_config_init,
+ .soft_reset = genphy_soft_reset,
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = kszphy_suspend,
- .resume = kszphy_resume,
+ .resume = ksz8061_resume,
}, {
.phy_id = PHY_ID_KSZ9021,
.phy_id_mask = 0x000ffffe,
@@ -5484,7 +5583,7 @@ static struct phy_driver ksphy_driver[] = {
.config_intr = kszphy_config_intr,
.handle_interrupt = kszphy_handle_interrupt,
.suspend = genphy_suspend,
- .resume = genphy_resume,
+ .resume = ksz9477_resume,
.get_features = ksz9477_get_features,
} };