summaryrefslogtreecommitdiff
path: root/drivers/net/phy
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy')
-rw-r--r--drivers/net/phy/mdio_bus.c8
-rw-r--r--drivers/net/phy/phy.c140
-rw-r--r--drivers/net/phy/phy_device.c3
-rw-r--r--drivers/net/phy/sfp.c2
4 files changed, 92 insertions, 61 deletions
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index e37edf70f2f8..6865d9319197 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -538,10 +538,16 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
bus->dev.groups = NULL;
dev_set_name(&bus->dev, "%s", bus->id);
+ /* We need to set state to MDIOBUS_UNREGISTERED to correctly release
+ * the device in mdiobus_free()
+ *
+ * State will be updated later in this function in case of success
+ */
+ bus->state = MDIOBUS_UNREGISTERED;
+
err = device_register(&bus->dev);
if (err) {
pr_err("mii_bus %s failed to register\n", bus->id);
- put_device(&bus->dev);
return -EINVAL;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index f124a8a58bd4..a3bfb156c83d 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -243,62 +243,10 @@ static void phy_sanitize_settings(struct phy_device *phydev)
}
}
-int phy_ethtool_ksettings_set(struct phy_device *phydev,
- const struct ethtool_link_ksettings *cmd)
-{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
- u8 autoneg = cmd->base.autoneg;
- u8 duplex = cmd->base.duplex;
- u32 speed = cmd->base.speed;
-
- if (cmd->base.phy_address != phydev->mdio.addr)
- return -EINVAL;
-
- linkmode_copy(advertising, cmd->link_modes.advertising);
-
- /* We make sure that we don't pass unsupported values in to the PHY */
- linkmode_and(advertising, advertising, phydev->supported);
-
- /* Verify the settings we care about. */
- if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
- return -EINVAL;
-
- if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
- return -EINVAL;
-
- if (autoneg == AUTONEG_DISABLE &&
- ((speed != SPEED_1000 &&
- speed != SPEED_100 &&
- speed != SPEED_10) ||
- (duplex != DUPLEX_HALF &&
- duplex != DUPLEX_FULL)))
- return -EINVAL;
-
- phydev->autoneg = autoneg;
-
- if (autoneg == AUTONEG_DISABLE) {
- phydev->speed = speed;
- phydev->duplex = duplex;
- }
-
- linkmode_copy(phydev->advertising, advertising);
-
- linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
- phydev->advertising, autoneg == AUTONEG_ENABLE);
-
- phydev->master_slave_set = cmd->base.master_slave_cfg;
- phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
-
- /* Restart the PHY */
- phy_start_aneg(phydev);
-
- return 0;
-}
-EXPORT_SYMBOL(phy_ethtool_ksettings_set);
-
void phy_ethtool_ksettings_get(struct phy_device *phydev,
struct ethtool_link_ksettings *cmd)
{
+ mutex_lock(&phydev->lock);
linkmode_copy(cmd->link_modes.supported, phydev->supported);
linkmode_copy(cmd->link_modes.advertising, phydev->advertising);
linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising);
@@ -317,6 +265,7 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev,
cmd->base.autoneg = phydev->autoneg;
cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl;
cmd->base.eth_tp_mdix = phydev->mdix;
+ mutex_unlock(&phydev->lock);
}
EXPORT_SYMBOL(phy_ethtool_ksettings_get);
@@ -751,7 +700,7 @@ static int phy_check_link_status(struct phy_device *phydev)
}
/**
- * phy_start_aneg - start auto-negotiation for this PHY device
+ * _phy_start_aneg - start auto-negotiation for this PHY device
* @phydev: the phy_device struct
*
* Description: Sanitizes the settings (if we're not autonegotiating
@@ -759,25 +708,43 @@ static int phy_check_link_status(struct phy_device *phydev)
* If the PHYCONTROL Layer is operating, we change the state to
* reflect the beginning of Auto-negotiation or forcing.
*/
-int phy_start_aneg(struct phy_device *phydev)
+static int _phy_start_aneg(struct phy_device *phydev)
{
int err;
+ lockdep_assert_held(&phydev->lock);
+
if (!phydev->drv)
return -EIO;
- mutex_lock(&phydev->lock);
-
if (AUTONEG_DISABLE == phydev->autoneg)
phy_sanitize_settings(phydev);
err = phy_config_aneg(phydev);
if (err < 0)
- goto out_unlock;
+ return err;
if (phy_is_started(phydev))
err = phy_check_link_status(phydev);
-out_unlock:
+
+ return err;
+}
+
+/**
+ * phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
+ *
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ * them), and then calls the driver's config_aneg function.
+ * If the PHYCONTROL Layer is operating, we change the state to
+ * reflect the beginning of Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ mutex_lock(&phydev->lock);
+ err = _phy_start_aneg(phydev);
mutex_unlock(&phydev->lock);
return err;
@@ -800,6 +767,61 @@ static int phy_poll_aneg_done(struct phy_device *phydev)
return ret < 0 ? ret : 0;
}
+int phy_ethtool_ksettings_set(struct phy_device *phydev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+ u8 autoneg = cmd->base.autoneg;
+ u8 duplex = cmd->base.duplex;
+ u32 speed = cmd->base.speed;
+
+ if (cmd->base.phy_address != phydev->mdio.addr)
+ return -EINVAL;
+
+ linkmode_copy(advertising, cmd->link_modes.advertising);
+
+ /* We make sure that we don't pass unsupported values in to the PHY */
+ linkmode_and(advertising, advertising, phydev->supported);
+
+ /* Verify the settings we care about. */
+ if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
+ return -EINVAL;
+
+ if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
+ return -EINVAL;
+
+ if (autoneg == AUTONEG_DISABLE &&
+ ((speed != SPEED_1000 &&
+ speed != SPEED_100 &&
+ speed != SPEED_10) ||
+ (duplex != DUPLEX_HALF &&
+ duplex != DUPLEX_FULL)))
+ return -EINVAL;
+
+ mutex_lock(&phydev->lock);
+ phydev->autoneg = autoneg;
+
+ if (autoneg == AUTONEG_DISABLE) {
+ phydev->speed = speed;
+ phydev->duplex = duplex;
+ }
+
+ linkmode_copy(phydev->advertising, advertising);
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->advertising, autoneg == AUTONEG_ENABLE);
+
+ phydev->master_slave_set = cmd->base.master_slave_cfg;
+ phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
+
+ /* Restart the PHY */
+ _phy_start_aneg(phydev);
+
+ mutex_unlock(&phydev->lock);
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_ksettings_set);
+
/**
* phy_speed_down - set speed to lowest speed supported by both link partners
* @phydev: the phy_device struct
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ba5ad86ec826..4f9990b47a37 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3125,6 +3125,9 @@ static void phy_shutdown(struct device *dev)
{
struct phy_device *phydev = to_phy_device(dev);
+ if (phydev->state == PHY_READY || !phydev->attached_dev)
+ return;
+
phy_disable_interrupts(phydev);
}
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 34e90216bd2c..ab77a9f439ef 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -134,7 +134,7 @@ static const char * const sm_state_strings[] = {
[SFP_S_LINK_UP] = "link_up",
[SFP_S_TX_FAULT] = "tx_fault",
[SFP_S_REINIT] = "reinit",
- [SFP_S_TX_DISABLE] = "rx_disable",
+ [SFP_S_TX_DISABLE] = "tx_disable",
};
static const char *sm_state_to_str(unsigned short sm_state)
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-23 21:23:45 +0000