summaryrefslogtreecommitdiff
path: root/drivers/net/sb1000.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sb1000.c')
-rw-r--r--drivers/net/sb1000.c101
1 files changed, 56 insertions, 45 deletions
diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index 487f9d2ac5b4..5986cec17f19 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -88,31 +88,31 @@ static int sb1000_close(struct net_device *dev);
/* SB1000 hardware routines to be used during open/configuration phases */
-static inline int card_wait_for_busy_clear(const int ioaddr[],
+static int card_wait_for_busy_clear(const int ioaddr[],
const char* name);
-static inline int card_wait_for_ready(const int ioaddr[], const char* name,
+static int card_wait_for_ready(const int ioaddr[], const char* name,
unsigned char in[]);
static int card_send_command(const int ioaddr[], const char* name,
const unsigned char out[], unsigned char in[]);
/* SB1000 hardware routines to be used during frame rx interrupt */
-static inline int sb1000_wait_for_ready(const int ioaddr[], const char* name);
-static inline int sb1000_wait_for_ready_clear(const int ioaddr[],
+static int sb1000_wait_for_ready(const int ioaddr[], const char* name);
+static int sb1000_wait_for_ready_clear(const int ioaddr[],
const char* name);
-static inline void sb1000_send_command(const int ioaddr[], const char* name,
+static void sb1000_send_command(const int ioaddr[], const char* name,
const unsigned char out[]);
-static inline void sb1000_read_status(const int ioaddr[], unsigned char in[]);
-static inline void sb1000_issue_read_command(const int ioaddr[],
+static void sb1000_read_status(const int ioaddr[], unsigned char in[]);
+static void sb1000_issue_read_command(const int ioaddr[],
const char* name);
/* SB1000 commands for open/configuration */
-static inline int sb1000_reset(const int ioaddr[], const char* name);
-static inline int sb1000_check_CRC(const int ioaddr[], const char* name);
+static int sb1000_reset(const int ioaddr[], const char* name);
+static int sb1000_check_CRC(const int ioaddr[], const char* name);
static inline int sb1000_start_get_set_command(const int ioaddr[],
const char* name);
-static inline int sb1000_end_get_set_command(const int ioaddr[],
+static int sb1000_end_get_set_command(const int ioaddr[],
const char* name);
-static inline int sb1000_activate(const int ioaddr[], const char* name);
+static int sb1000_activate(const int ioaddr[], const char* name);
static int sb1000_get_firmware_version(const int ioaddr[],
const char* name, unsigned char version[], int do_end);
static int sb1000_get_frequency(const int ioaddr[], const char* name,
@@ -125,8 +125,8 @@ static int sb1000_set_PIDs(const int ioaddr[], const char* name,
const short PID[]);
/* SB1000 commands for frame rx interrupt */
-static inline int sb1000_rx(struct net_device *dev);
-static inline void sb1000_error_dpc(struct net_device *dev);
+static int sb1000_rx(struct net_device *dev);
+static void sb1000_error_dpc(struct net_device *dev);
static const struct pnp_device_id sb1000_pnp_ids[] = {
{ "GIC1000", 0 },
@@ -250,7 +250,7 @@ static struct pnp_driver sb1000_driver = {
static const int TimeOutJiffies = (875 * HZ) / 100;
/* Card Wait For Busy Clear (cannot be used during an interrupt) */
-static inline int
+static int
card_wait_for_busy_clear(const int ioaddr[], const char* name)
{
unsigned char a;
@@ -274,7 +274,7 @@ card_wait_for_busy_clear(const int ioaddr[], const char* name)
}
/* Card Wait For Ready (cannot be used during an interrupt) */
-static inline int
+static int
card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
{
unsigned char a;
@@ -354,7 +354,7 @@ card_send_command(const int ioaddr[], const char* name,
static const int Sb1000TimeOutJiffies = 7 * HZ;
/* Card Wait For Ready (to be used during frame rx) */
-static inline int
+static int
sb1000_wait_for_ready(const int ioaddr[], const char* name)
{
unsigned long timeout;
@@ -380,7 +380,7 @@ sb1000_wait_for_ready(const int ioaddr[], const char* name)
}
/* Card Wait For Ready Clear (to be used during frame rx) */
-static inline int
+static int
sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
{
unsigned long timeout;
@@ -405,7 +405,7 @@ sb1000_wait_for_ready_clear(const int ioaddr[], const char* name)
}
/* Card Send Command (to be used during frame rx) */
-static inline void
+static void
sb1000_send_command(const int ioaddr[], const char* name,
const unsigned char out[])
{
@@ -422,7 +422,7 @@ sb1000_send_command(const int ioaddr[], const char* name,
}
/* Card Read Status (to be used during frame rx) */
-static inline void
+static void
sb1000_read_status(const int ioaddr[], unsigned char in[])
{
in[1] = inb(ioaddr[0] + 1);
@@ -434,10 +434,10 @@ sb1000_read_status(const int ioaddr[], unsigned char in[])
}
/* Issue Read Command (to be used during frame rx) */
-static inline void
+static void
sb1000_issue_read_command(const int ioaddr[], const char* name)
{
- const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
+ static const unsigned char Command0[6] = {0x20, 0x00, 0x00, 0x01, 0x00, 0x00};
sb1000_wait_for_ready_clear(ioaddr, name);
outb(0xa0, ioaddr[0] + 6);
@@ -450,12 +450,13 @@ sb1000_issue_read_command(const int ioaddr[], const char* name)
* SB1000 commands for open/configuration
*/
/* reset SB1000 card */
-static inline int
+static int
sb1000_reset(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int port, status;
- const unsigned char Command0[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
port = ioaddr[1] + 6;
outb(0x4, port);
@@ -479,12 +480,13 @@ sb1000_reset(const int ioaddr[], const char* name)
}
/* check SB1000 firmware CRC */
-static inline int
+static int
sb1000_check_CRC(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x1f, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int crc, status;
- const unsigned char Command0[6] = {0x80, 0x1f, 0x00, 0x00, 0x00, 0x00};
/* check CRC */
if ((status = card_send_command(ioaddr, name, Command0, st)))
@@ -498,32 +500,35 @@ sb1000_check_CRC(const int ioaddr[], const char* name)
static inline int
sb1000_start_get_set_command(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x1b, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
- const unsigned char Command0[6] = {0x80, 0x1b, 0x00, 0x00, 0x00, 0x00};
return card_send_command(ioaddr, name, Command0, st);
}
-static inline int
+static int
sb1000_end_get_set_command(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x1b, 0x02, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x20, 0x00, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x1b, 0x02, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x20, 0x00, 0x00, 0x00, 0x00, 0x00};
if ((status = card_send_command(ioaddr, name, Command0, st)))
return status;
return card_send_command(ioaddr, name, Command1, st);
}
-static inline int
+static int
sb1000_activate(const int ioaddr[], const char* name)
{
+ static const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x11, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x80, 0x16, 0x00, 0x00, 0x00, 0x00};
ssleep(1);
if ((status = card_send_command(ioaddr, name, Command0, st)))
@@ -544,9 +549,10 @@ static int
sb1000_get_firmware_version(const int ioaddr[], const char* name,
unsigned char version[], int do_end)
{
+ static const unsigned char Command0[6] = {0x80, 0x23, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x23, 0x00, 0x00, 0x00, 0x00};
if ((status = sb1000_start_get_set_command(ioaddr, name)))
return status;
@@ -566,9 +572,10 @@ sb1000_get_firmware_version(const int ioaddr[], const char* name,
static int
sb1000_get_frequency(const int ioaddr[], const char* name, int* frequency)
{
+ static const unsigned char Command0[6] = {0x80, 0x44, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x44, 0x00, 0x00, 0x00, 0x00};
udelay(1000);
if ((status = sb1000_start_get_set_command(ioaddr, name)))
@@ -613,12 +620,13 @@ sb1000_set_frequency(const int ioaddr[], const char* name, int frequency)
static int
sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
{
+ static const unsigned char Command0[6] = {0x80, 0x40, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x80, 0x41, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command2[6] = {0x80, 0x42, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command3[6] = {0x80, 0x43, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
int status;
- const unsigned char Command0[6] = {0x80, 0x40, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x80, 0x41, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command2[6] = {0x80, 0x42, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command3[6] = {0x80, 0x43, 0x00, 0x00, 0x00, 0x00};
udelay(1000);
if ((status = sb1000_start_get_set_command(ioaddr, name)))
@@ -647,6 +655,8 @@ sb1000_get_PIDs(const int ioaddr[], const char* name, short PID[])
static int
sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
{
+ static const unsigned char Command4[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
+
unsigned char st[7];
short p;
int status;
@@ -654,7 +664,6 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
unsigned char Command1[6] = {0x80, 0x32, 0x00, 0x00, 0x00, 0x00};
unsigned char Command2[6] = {0x80, 0x33, 0x00, 0x00, 0x00, 0x00};
unsigned char Command3[6] = {0x80, 0x34, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command4[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
udelay(1000);
if ((status = sb1000_start_get_set_command(ioaddr, name)))
@@ -694,7 +703,7 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
}
-static inline void
+static void
sb1000_print_status_buffer(const char* name, unsigned char st[],
unsigned char buffer[], int size)
{
@@ -725,7 +734,7 @@ sb1000_print_status_buffer(const char* name, unsigned char st[],
/* receive a single frame and assemble datagram
* (this is the heart of the interrupt routine)
*/
-static inline int
+static int
sb1000_rx(struct net_device *dev)
{
@@ -888,14 +897,15 @@ dropped_frame:
return -1;
}
-static inline void
+static void
sb1000_error_dpc(struct net_device *dev)
{
+ static const unsigned char Command0[6] = {0x80, 0x26, 0x00, 0x00, 0x00, 0x00};
+
char *name;
unsigned char st[5];
int ioaddr[2];
struct sb1000_private *lp = netdev_priv(dev);
- const unsigned char Command0[6] = {0x80, 0x26, 0x00, 0x00, 0x00, 0x00};
const int ErrorDpcCounterInitialize = 200;
ioaddr[0] = dev->base_addr;
@@ -1077,14 +1087,15 @@ sb1000_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* SB1000 interrupt handler. */
static irqreturn_t sb1000_interrupt(int irq, void *dev_id)
{
+ static const unsigned char Command0[6] = {0x80, 0x2c, 0x00, 0x00, 0x00, 0x00};
+ static const unsigned char Command1[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
+
char *name;
unsigned char st;
int ioaddr[2];
struct net_device *dev = dev_id;
struct sb1000_private *lp = netdev_priv(dev);
- const unsigned char Command0[6] = {0x80, 0x2c, 0x00, 0x00, 0x00, 0x00};
- const unsigned char Command1[6] = {0x80, 0x2e, 0x00, 0x00, 0x00, 0x00};
const int MaxRxErrorCount = 6;
ioaddr[0] = dev->base_addr;