summaryrefslogtreecommitdiff
path: root/drivers/net/sk98lin/skgeinit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sk98lin/skgeinit.c')
-rw-r--r--drivers/net/sk98lin/skgeinit.c2005
1 files changed, 0 insertions, 2005 deletions
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
deleted file mode 100644
index 67f1d6a5c15d..000000000000
--- a/drivers/net/sk98lin/skgeinit.c
+++ /dev/null
@@ -1,2005 +0,0 @@
-/******************************************************************************
- *
- * Name: skgeinit.c
- * Project: Gigabit Ethernet Adapters, Common Modules
- * Version: $Revision: 1.97 $
- * Date: $Date: 2003/10/02 16:45:31 $
- * Purpose: Contains functions to initialize the adapter
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2002 SysKonnect.
- * (C)Copyright 2002-2003 Marvell.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skdrv2nd.h"
-
-/* global variables ***********************************************************/
-
-/* local variables ************************************************************/
-
-#if (defined(DEBUG) || ((!defined(LINT)) && (!defined(SK_SLIM))))
-static const char SysKonnectFileId[] =
- "@(#) $Id: skgeinit.c,v 1.97 2003/10/02 16:45:31 rschmidt Exp $ (C) Marvell.";
-#endif
-
-struct s_QOffTab {
- int RxQOff; /* Receive Queue Address Offset */
- int XsQOff; /* Sync Tx Queue Address Offset */
- int XaQOff; /* Async Tx Queue Address Offset */
-};
-static struct s_QOffTab QOffTab[] = {
- {Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
-};
-
-struct s_Config {
- char ScanString[8];
- SK_U32 Value;
-};
-
-static struct s_Config OemConfig = {
- {'O','E','M','_','C','o','n','f'},
-#ifdef SK_OEM_CONFIG
- OEM_CONFIG_VALUE,
-#else
- 0,
-#endif
-};
-
-/******************************************************************************
- *
- * SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
- *
- * Description:
- * Enable or disable the descriptor polling of the transmit descriptor
- * ring(s) (TxD) for port 'Port'.
- * The new configuration is *not* saved over any SkGeStopPort() and
- * SkGeInitPort() calls.
- *
- * Returns:
- * nothing
- */
-void SkGePollTxD(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
-{
- SK_GEPORT *pPrt;
- SK_U32 DWord;
-
- pPrt = &pAC->GIni.GP[Port];
-
- DWord = (SK_U32)(PollTxD ? CSR_ENA_POL : CSR_DIS_POL);
-
- if (pPrt->PXSQSize != 0) {
- SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
- }
-
- if (pPrt->PXAQSize != 0) {
- SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
- }
-} /* SkGePollTxD */
-
-
-/******************************************************************************
- *
- * SkGeYellowLED() - Switch the yellow LED on or off.
- *
- * Description:
- * Switch the yellow LED on or off.
- *
- * Note:
- * This function may be called any time after SkGeInit(Level 1).
- *
- * Returns:
- * nothing
- */
-void SkGeYellowLED(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int State) /* yellow LED state, 0 = OFF, 0 != ON */
-{
- if (State == 0) {
- /* Switch yellow LED OFF */
- SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
- }
- else {
- /* Switch yellow LED ON */
- SK_OUT8(IoC, B0_LED, LED_STAT_ON);
- }
-} /* SkGeYellowLED */
-
-
-#if (!defined(SK_SLIM) || defined(GENESIS))
-/******************************************************************************
- *
- * SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
- *
- * Description:
- * The Rx or Tx LED which is specified by 'Led' will be
- * enabled, disabled or switched on in test mode.
- *
- * Note:
- * 'Led' must contain the address offset of the LEDs INI register.
- *
- * Usage:
- * SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
- *
- * Returns:
- * nothing
- */
-void SkGeXmitLED(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Led, /* offset to the LED Init Value register */
-int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
-{
- SK_U32 LedIni;
-
- switch (Mode) {
- case SK_LED_ENA:
- LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
- SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
- SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
- break;
- case SK_LED_TST:
- SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
- SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
- SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
- break;
- case SK_LED_DIS:
- default:
- /*
- * Do NOT stop the LED Timer here. The LED might be
- * in on state. But it needs to go off.
- */
- SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
- SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
- break;
- }
-
- /*
- * 1000BT: The Transmit LED is driven by the PHY.
- * But the default LED configuration is used for
- * Level One and Broadcom PHYs.
- * (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
- * (In this case it has to be added here. But we will see. XXX)
- */
-} /* SkGeXmitLED */
-#endif /* !SK_SLIM || GENESIS */
-
-
-/******************************************************************************
- *
- * DoCalcAddr() - Calculates the start and the end address of a queue.
- *
- * Description:
- * This function calculates the start and the end address of a queue.
- * Afterwards the 'StartVal' is incremented to the next start position.
- * If the port is already initialized the calculated values
- * will be checked against the configured values and an
- * error will be returned, if they are not equal.
- * If the port is not initialized the values will be written to
- * *StartAdr and *EndAddr.
- *
- * Returns:
- * 0: success
- * 1: configuration error
- */
-static int DoCalcAddr(
-SK_AC *pAC, /* adapter context */
-SK_GEPORT SK_FAR *pPrt, /* port index */
-int QuSize, /* size of the queue to configure in kB */
-SK_U32 SK_FAR *StartVal, /* start value for address calculation */
-SK_U32 SK_FAR *QuStartAddr,/* start addr to calculate */
-SK_U32 SK_FAR *QuEndAddr) /* end address to calculate */
-{
- SK_U32 EndVal;
- SK_U32 NextStart;
- int Rtv;
-
- Rtv = 0;
- if (QuSize == 0) {
- EndVal = *StartVal;
- NextStart = EndVal;
- }
- else {
- EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
- NextStart = EndVal + 1;
- }
-
- if (pPrt->PState >= SK_PRT_INIT) {
- if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
- Rtv = 1;
- }
- }
- else {
- *QuStartAddr = *StartVal;
- *QuEndAddr = EndVal;
- }
-
- *StartVal = NextStart;
- return(Rtv);
-} /* DoCalcAddr */
-
-/******************************************************************************
- *
- * SkGeInitAssignRamToQueues() - allocate default queue sizes
- *
- * Description:
- * This function assigns the memory to the different queues and ports.
- * When DualNet is set to SK_TRUE all ports get the same amount of memory.
- * Otherwise the first port gets most of the memory and all the
- * other ports just the required minimum.
- * This function can only be called when pAC->GIni.GIRamSize and
- * pAC->GIni.GIMacsFound have been initialized, usually this happens
- * at init level 1
- *
- * Returns:
- * 0 - ok
- * 1 - invalid input values
- * 2 - not enough memory
- */
-
-int SkGeInitAssignRamToQueues(
-SK_AC *pAC, /* Adapter context */
-int ActivePort, /* Active Port in RLMT mode */
-SK_BOOL DualNet) /* adapter context */
-{
- int i;
- int UsedKilobytes; /* memory already assigned */
- int ActivePortKilobytes; /* memory available for active port */
- SK_GEPORT *pGePort;
-
- UsedKilobytes = 0;
-
- if (ActivePort >= pAC->GIni.GIMacsFound) {
- SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
- ("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
- ActivePort));
- return(1);
- }
- if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
- ((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
- SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
- ("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
- pAC->GIni.GIRamSize));
- return(2);
- }
-
- if (DualNet) {
- /* every port gets the same amount of memory */
- ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
- pGePort = &pAC->GIni.GP[i];
-
- /* take away the minimum memory for active queues */
- ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
-
- /* receive queue gets the minimum + 80% of the rest */
- pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
- ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
- + SK_MIN_RXQ_SIZE;
-
- ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
-
- /* synchronous transmit queue */
- pGePort->PXSQSize = 0;
-
- /* asynchronous transmit queue */
- pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
- SK_MIN_TXQ_SIZE);
- }
- }
- else {
- /* Rlmt Mode or single link adapter */
-
- /* Set standby queue size defaults for all standby ports */
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
- if (i != ActivePort) {
- pGePort = &pAC->GIni.GP[i];
-
- pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
- pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
- pGePort->PXSQSize = 0;
-
- /* Count used RAM */
- UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
- }
- }
- /* what's left? */
- ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
-
- /* assign it to the active port */
- /* first take away the minimum memory */
- ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
- pGePort = &pAC->GIni.GP[ActivePort];
-
- /* receive queue get's the minimum + 80% of the rest */
- pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
- (unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
-
- ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
-
- /* synchronous transmit queue */
- pGePort->PXSQSize = 0;
-
- /* asynchronous transmit queue */
- pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
- SK_MIN_TXQ_SIZE;
- }
-#ifdef VCPU
- VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
- pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
-#endif /* VCPU */
-
- return(0);
-} /* SkGeInitAssignRamToQueues */
-
-/******************************************************************************
- *
- * SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
- *
- * Description:
- * This function verifies the Queue Size Configuration specified
- * in the variables PRxQSize, PXSQSize, and PXAQSize of all
- * used ports.
- * This requirements must be fullfilled to have a valid configuration:
- * - The size of all queues must not exceed GIRamSize.
- * - The queue sizes must be specified in units of 8 kB.
- * - The size of Rx queues of available ports must not be
- * smaller than 16 kB.
- * - The size of at least one Tx queue (synch. or asynch.)
- * of available ports must not be smaller than 16 kB
- * when Jumbo Frames are used.
- * - The RAM start and end addresses must not be changed
- * for ports which are already initialized.
- * Furthermore SkGeCheckQSize() defines the Start and End Addresses
- * of all ports and stores them into the HWAC port structure.
- *
- * Returns:
- * 0: Queue Size Configuration valid
- * 1: Queue Size Configuration invalid
- */
-static int SkGeCheckQSize(
-SK_AC *pAC, /* adapter context */
-int Port) /* port index */
-{
- SK_GEPORT *pPrt;
- int i;
- int Rtv;
- int Rtv2;
- SK_U32 StartAddr;
-#ifndef SK_SLIM
- int UsedMem; /* total memory used (max. found ports) */
-#endif
-
- Rtv = 0;
-
-#ifndef SK_SLIM
-
- UsedMem = 0;
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
- pPrt = &pAC->GIni.GP[i];
-
- if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
- (pPrt->PXSQSize & QZ_UNITS) != 0 ||
- (pPrt->PXAQSize & QZ_UNITS) != 0) {
-
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
- return(1);
- }
-
- if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
- return(1);
- }
-
- /*
- * the size of at least one Tx queue (synch. or asynch.) has to be > 0.
- * if Jumbo Frames are used, this size has to be >= 16 kB.
- */
- if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
- (pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
- ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
- (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
- return(1);
- }
-
- UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
- }
-
- if (UsedMem > pAC->GIni.GIRamSize) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
- return(1);
- }
-#endif /* !SK_SLIM */
-
- /* Now start address calculation */
- StartAddr = pAC->GIni.GIRamOffs;
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
- pPrt = &pAC->GIni.GP[i];
-
- /* Calculate/Check values for the receive queue */
- Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
- &pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
- Rtv |= Rtv2;
-
- /* Calculate/Check values for the synchronous Tx queue */
- Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
- &pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
- Rtv |= Rtv2;
-
- /* Calculate/Check values for the asynchronous Tx queue */
- Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
- &pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
- Rtv |= Rtv2;
-
- if (Rtv) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
- return(1);
- }
- }
-
- return(0);
-} /* SkGeCheckQSize */
-
-
-#ifdef GENESIS
-/******************************************************************************
- *
- * SkGeInitMacArb() - Initialize the MAC Arbiter
- *
- * Description:
- * This function initializes the MAC Arbiter.
- * It must not be called if there is still an
- * initialized or active port.
- *
- * Returns:
- * nothing
- */
-static void SkGeInitMacArb(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- /* release local reset */
- SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
-
- /* configure timeout values */
- SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
- SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
- SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
- SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
-
- SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
- SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
- SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
- SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
-
- /* recovery values are needed for XMAC II Rev. B2 only */
- /* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
-
- /*
- * There is no start or enable button to push, therefore
- * the MAC arbiter is configured and enabled now.
- */
-} /* SkGeInitMacArb */
-
-
-/******************************************************************************
- *
- * SkGeInitPktArb() - Initialize the Packet Arbiter
- *
- * Description:
- * This function initializes the Packet Arbiter.
- * It must not be called if there is still an
- * initialized or active port.
- *
- * Returns:
- * nothing
- */
-static void SkGeInitPktArb(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- /* release local reset */
- SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
-
- /* configure timeout values */
- SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
- SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
- SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
- SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
-
- /*
- * enable timeout timers if jumbo frames not used
- * NOTE: the packet arbiter timeout interrupt is needed for
- * half duplex hangup workaround
- */
- if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
- if (pAC->GIni.GIMacsFound == 1) {
- SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
- }
- else {
- SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
- }
- }
-} /* SkGeInitPktArb */
-#endif /* GENESIS */
-
-
-/******************************************************************************
- *
- * SkGeInitMacFifo() - Initialize the MAC FIFOs
- *
- * Description:
- * Initialize all MAC FIFOs of the specified port
- *
- * Returns:
- * nothing
- */
-static void SkGeInitMacFifo(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (MAC_1 + n) */
-{
- SK_U16 Word;
-#ifdef VCPU
- SK_U32 DWord;
-#endif /* VCPU */
- /*
- * For each FIFO:
- * - release local reset
- * - use default value for MAC FIFO size
- * - setup defaults for the control register
- * - enable the FIFO
- */
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- /* Configure Rx MAC FIFO */
- SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
- SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
- SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
-
- /* Configure Tx MAC FIFO */
- SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
- SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
- SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
-
- /* Enable frame flushing if jumbo frames used */
- if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
- SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
- }
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
- /* set Rx GMAC FIFO Flush Mask */
- SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
-
- Word = (SK_U16)GMF_RX_CTRL_DEF;
-
- /* disable Rx GMAC FIFO Flush for YUKON-Lite Rev. A0 only */
- if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
-
- Word &= ~GMF_RX_F_FL_ON;
- }
-
- /* Configure Rx MAC FIFO */
- SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
- SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
-
- /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
- SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
-
- /* Configure Tx MAC FIFO */
- SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
- SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
-
-#ifdef VCPU
- SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
- SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
-#endif /* VCPU */
-
- /* set Tx GMAC FIFO Almost Empty Threshold */
-/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
- }
-#endif /* YUKON */
-
-} /* SkGeInitMacFifo */
-
-#ifdef SK_LNK_SYNC_CNT
-/******************************************************************************
- *
- * SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
- *
- * Description:
- * This function starts the Link Sync Counter of the specified
- * port and enables the generation of an Link Sync IRQ.
- * The Link Sync Counter may be used to detect an active link,
- * if autonegotiation is not used.
- *
- * Note:
- * o To ensure receiving the Link Sync Event the LinkSyncCounter
- * should be initialized BEFORE clearing the XMAC's reset!
- * o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
- * function.
- *
- * Returns:
- * nothing
- */
-void SkGeLoadLnkSyncCnt(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-SK_U32 CntVal) /* Counter value */
-{
- SK_U32 OrgIMsk;
- SK_U32 NewIMsk;
- SK_U32 ISrc;
- SK_BOOL IrqPend;
-
- /* stop counter */
- SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
-
- /*
- * ASIC problem:
- * Each time starting the Link Sync Counter an IRQ is generated
- * by the adapter. See problem report entry from 21.07.98
- *
- * Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ
- * if no IRQ is already pending.
- */
- IrqPend = SK_FALSE;
- SK_IN32(IoC, B0_ISRC, &ISrc);
- SK_IN32(IoC, B0_IMSK, &OrgIMsk);
- if (Port == MAC_1) {
- NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
- if ((ISrc & IS_LNK_SYNC_M1) != 0) {
- IrqPend = SK_TRUE;
- }
- }
- else {
- NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
- if ((ISrc & IS_LNK_SYNC_M2) != 0) {
- IrqPend = SK_TRUE;
- }
- }
- if (!IrqPend) {
- SK_OUT32(IoC, B0_IMSK, NewIMsk);
- }
-
- /* load counter */
- SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
-
- /* start counter */
- SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
-
- if (!IrqPend) {
- /* clear the unexpected IRQ, and restore the interrupt mask */
- SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
- SK_OUT32(IoC, B0_IMSK, OrgIMsk);
- }
-} /* SkGeLoadLnkSyncCnt*/
-#endif /* SK_LNK_SYNC_CNT */
-
-#if defined(SK_DIAG) || defined(SK_CFG_SYNC)
-/******************************************************************************
- *
- * SkGeCfgSync() - Configure synchronous bandwidth for this port.
- *
- * Description:
- * This function may be used to configure synchronous bandwidth
- * to the specified port. This may be done any time after
- * initializing the port. The configuration values are NOT saved
- * in the HWAC port structure and will be overwritten any
- * time when stopping and starting the port.
- * Any values for the synchronous configuration will be ignored
- * if the size of the synchronous queue is zero!
- *
- * The default configuration for the synchronous service is
- * TXA_ENA_FSYNC. This means if the size of
- * the synchronous queue is unequal zero but no specific
- * synchronous bandwidth is configured, the synchronous queue
- * will always have the 'unlimited' transmit priority!
- *
- * This mode will be restored if the synchronous bandwidth is
- * deallocated ('IntTime' = 0 and 'LimCount' = 0).
- *
- * Returns:
- * 0: success
- * 1: parameter configuration error
- * 2: try to configure quality of service although no
- * synchronous queue is configured
- */
-int SkGeCfgSync(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port, /* Port Index (MAC_1 + n) */
-SK_U32 IntTime, /* Interval Timer Value in units of 8ns */
-SK_U32 LimCount, /* Number of bytes to transfer during IntTime */
-int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
-{
- int Rtv;
-
- Rtv = 0;
-
- /* check the parameters */
- if (LimCount > IntTime ||
- (LimCount == 0 && IntTime != 0) ||
- (LimCount != 0 && IntTime == 0)) {
-
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
- return(1);
- }
-
- if (pAC->GIni.GP[Port].PXSQSize == 0) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
- return(2);
- }
-
- /* calculate register values */
- IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
- LimCount = LimCount / 8;
-
- if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
- return(1);
- }
-
- /*
- * - Enable 'Force Sync' to ensure the synchronous queue
- * has the priority while configuring the new values.
- * - Also 'disable alloc' to ensure the settings complies
- * to the SyncMode parameter.
- * - Disable 'Rate Control' to configure the new values.
- * - write IntTime and LimCount
- * - start 'Rate Control' and disable 'Force Sync'
- * if Interval Timer or Limit Counter not zero.
- */
- SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
- TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-
- SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
- SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
-
- SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
- (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
-
- if (IntTime != 0 || LimCount != 0) {
- SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
- }
-
- return(0);
-} /* SkGeCfgSync */
-#endif /* SK_DIAG || SK_CFG_SYNC*/
-
-
-/******************************************************************************
- *
- * DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
- *
- * Desccription:
- * If the queue is used, enable and initialize it.
- * Make sure the queue is still reset, if it is not used.
- *
- * Returns:
- * nothing
- */
-static void DoInitRamQueue(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int QuIoOffs, /* Queue IO Address Offset */
-SK_U32 QuStartAddr, /* Queue Start Address */
-SK_U32 QuEndAddr, /* Queue End Address */
-int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
-{
- SK_U32 RxUpThresVal;
- SK_U32 RxLoThresVal;
-
- if (QuStartAddr != QuEndAddr) {
- /* calculate thresholds, assume we have a big Rx queue */
- RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
- RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
-
- /* build HW address format */
- QuStartAddr = QuStartAddr / 8;
- QuEndAddr = QuEndAddr / 8;
-
- /* release local reset */
- SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
-
- /* configure addresses */
- SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
- SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
- SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
- SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
-
- switch (QuType) {
- case SK_RX_SRAM_Q:
- /* configure threshold for small Rx Queue */
- RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
-
- /* continue with SK_RX_BRAM_Q */
- case SK_RX_BRAM_Q:
- /* write threshold for Rx Queue */
-
- SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
- SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
-
- /* the high priority threshold not used */
- break;
- case SK_TX_RAM_Q:
- /*
- * Do NOT use Store & Forward under normal operation due to
- * performance optimization (GENESIS only).
- * But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
- * or YUKON is used ((GMAC Tx FIFO is only 1 kB)
- * we NEED Store & Forward of the RAM buffer.
- */
- if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
- pAC->GIni.GIYukon) {
- /* enable Store & Forward Mode for the Tx Side */
- SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
- }
- break;
- }
-
- /* set queue operational */
- SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
- }
- else {
- /* ensure the queue is still disabled */
- SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
- }
-} /* DoInitRamQueue */
-
-
-/******************************************************************************
- *
- * SkGeInitRamBufs() - Initialize the RAM Buffer Queues
- *
- * Description:
- * Initialize all RAM Buffer Queues of the specified port
- *
- * Returns:
- * nothing
- */
-static void SkGeInitRamBufs(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (MAC_1 + n) */
-{
- SK_GEPORT *pPrt;
- int RxQType;
-
- pPrt = &pAC->GIni.GP[Port];
-
- if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
- RxQType = SK_RX_SRAM_Q; /* small Rx Queue */
- }
- else {
- RxQType = SK_RX_BRAM_Q; /* big Rx Queue */
- }
-
- DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
- pPrt->PRxQRamEnd, RxQType);
-
- DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
- pPrt->PXsQRamEnd, SK_TX_RAM_Q);
-
- DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
- pPrt->PXaQRamEnd, SK_TX_RAM_Q);
-
-} /* SkGeInitRamBufs */
-
-
-/******************************************************************************
- *
- * SkGeInitRamIface() - Initialize the RAM Interface
- *
- * Description:
- * This function initializes the Adapters RAM Interface.
- *
- * Note:
- * This function is used in the diagnostics.
- *
- * Returns:
- * nothing
- */
-static void SkGeInitRamIface(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- /* release local reset */
- SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
-
- /* configure timeout values */
- SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
- SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
-
-} /* SkGeInitRamIface */
-
-
-/******************************************************************************
- *
- * SkGeInitBmu() - Initialize the BMU state machines
- *
- * Description:
- * Initialize all BMU state machines of the specified port
- *
- * Returns:
- * nothing
- */
-static void SkGeInitBmu(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port Index (MAC_1 + n) */
-{
- SK_GEPORT *pPrt;
- SK_U32 RxWm;
- SK_U32 TxWm;
-
- pPrt = &pAC->GIni.GP[Port];
-
- RxWm = SK_BMU_RX_WM;
- TxWm = SK_BMU_TX_WM;
-
- if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
- /* for better performance */
- RxWm /= 2;
- TxWm /= 2;
- }
-
- /* Rx Queue: Release all local resets and set the watermark */
- SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
- SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
-
- /*
- * Tx Queue: Release all local resets if the queue is used !
- * set watermark
- */
- if (pPrt->PXSQSize != 0) {
- SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
- SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
- }
-
- if (pPrt->PXAQSize != 0) {
- SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
- SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
- }
- /*
- * Do NOT enable the descriptor poll timers here, because
- * the descriptor addresses are not specified yet.
- */
-} /* SkGeInitBmu */
-
-
-/******************************************************************************
- *
- * TestStopBit() - Test the stop bit of the queue
- *
- * Description:
- * Stopping a queue is not as simple as it seems to be.
- * If descriptor polling is enabled, it may happen
- * that RX/TX stop is done and SV idle is NOT set.
- * In this case we have to issue another stop command.
- *
- * Returns:
- * The queues control status register
- */
-static SK_U32 TestStopBit(
-SK_AC *pAC, /* Adapter Context */
-SK_IOC IoC, /* IO Context */
-int QuIoOffs) /* Queue IO Address Offset */
-{
- SK_U32 QuCsr; /* CSR contents */
-
- SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
-
- if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
- /* Stop Descriptor overridden by start command */
- SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
-
- SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
- }
-
- return(QuCsr);
-} /* TestStopBit */
-
-
-/******************************************************************************
- *
- * SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
- *
- * Description:
- * After calling this function the descriptor rings and Rx and Tx
- * queues of this port may be reconfigured.
- *
- * It is possible to stop the receive and transmit path separate or
- * both together.
- *
- * Dir = SK_STOP_TX Stops the transmit path only and resets the MAC.
- * The receive queue is still active and
- * the pending Rx frames may be still transferred
- * into the RxD.
- * SK_STOP_RX Stop the receive path. The tansmit path
- * has to be stopped once before.
- * SK_STOP_ALL SK_STOP_TX + SK_STOP_RX
- *
- * RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive.
- * SK_HARD_RST Resets the MAC and the PHY.
- *
- * Example:
- * 1) A Link Down event was signaled for a port. Therefore the activity
- * of this port should be stopped and a hardware reset should be issued
- * to enable the workaround of XMAC Errata #2. But the received frames
- * should not be discarded.
- * ...
- * SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
- * (transfer all pending Rx frames)
- * SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
- * ...
- *
- * 2) An event was issued which request the driver to switch
- * the 'virtual active' link to an other already active port
- * as soon as possible. The frames in the receive queue of this
- * port may be lost. But the PHY must not be reset during this
- * event.
- * ...
- * SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
- * ...
- *
- * Extended Description:
- * If SK_STOP_TX is set,
- * o disable the MAC's receive and transmitter to prevent
- * from sending incomplete frames
- * o stop the port's transmit queues before terminating the
- * BMUs to prevent from performing incomplete PCI cycles
- * on the PCI bus
- * - The network Rx and Tx activity and PCI Tx transfer is
- * disabled now.
- * o reset the MAC depending on the RstMode
- * o Stop Interval Timer and Limit Counter of Tx Arbiter,
- * also disable Force Sync bit and Enable Alloc bit.
- * o perform a local reset of the port's Tx path
- * - reset the PCI FIFO of the async Tx queue
- * - reset the PCI FIFO of the sync Tx queue
- * - reset the RAM Buffer async Tx queue
- * - reset the RAM Buffer sync Tx queue
- * - reset the MAC Tx FIFO
- * o switch Link and Tx LED off, stop the LED counters
- *
- * If SK_STOP_RX is set,
- * o stop the port's receive queue
- * - The path data transfer activity is fully stopped now.
- * o perform a local reset of the port's Rx path
- * - reset the PCI FIFO of the Rx queue
- * - reset the RAM Buffer receive queue
- * - reset the MAC Rx FIFO
- * o switch Rx LED off, stop the LED counter
- *
- * If all ports are stopped,
- * o reset the RAM Interface.
- *
- * Notes:
- * o This function may be called during the driver states RESET_PORT and
- * SWITCH_PORT.
- */
-void SkGeStopPort(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* I/O context */
-int Port, /* port to stop (MAC_1 + n) */
-int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
-int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
-{
-#ifndef SK_DIAG
- SK_EVPARA Para;
-#endif /* !SK_DIAG */
- SK_GEPORT *pPrt;
- SK_U32 DWord;
- SK_U32 XsCsr;
- SK_U32 XaCsr;
- SK_U64 ToutStart;
- int i;
- int ToutCnt;
-
- pPrt = &pAC->GIni.GP[Port];
-
- if ((Dir & SK_STOP_TX) != 0) {
- /* disable receiver and transmitter */
- SkMacRxTxDisable(pAC, IoC, Port);
-
- /* stop both transmit queues */
- /*
- * If the BMU is in the reset state CSR_STOP will terminate
- * immediately.
- */
- SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
- SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
-
- ToutStart = SkOsGetTime(pAC);
- ToutCnt = 0;
- do {
- /*
- * Clear packet arbiter timeout to make sure
- * this loop will terminate.
- */
- SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ?
- PA_CLR_TO_TX1 : PA_CLR_TO_TX2));
-
- /*
- * If the transfer stucks at the MAC the STOP command will not
- * terminate if we don't flush the XMAC's transmit FIFO !
- */
- SkMacFlushTxFifo(pAC, IoC, Port);
-
- XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
- XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
-
- if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
- /*
- * Timeout of 1/18 second reached.
- * This needs to be checked at 1/18 sec only.
- */
- ToutCnt++;
- if (ToutCnt > 1) {
- /* Might be a problem when the driver event handler
- * calls StopPort again. XXX.
- */
-
- /* Fatal Error, Loop aborted */
- SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
- SKERR_HWI_E018MSG);
-#ifndef SK_DIAG
- Para.Para64 = Port;
- SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
-#endif /* !SK_DIAG */
- return;
- }
- /*
- * Cache incoherency workaround: Assume a start command
- * has been lost while sending the frame.
- */
- ToutStart = SkOsGetTime(pAC);
-
- if ((XsCsr & CSR_STOP) != 0) {
- SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
- }
- if ((XaCsr & CSR_STOP) != 0) {
- SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
- }
- }
-
- /*
- * Because of the ASIC problem report entry from 21.08.1998 it is
- * required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
- */
- } while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
- (XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
-
- /* Reset the MAC depending on the RstMode */
- if (RstMode == SK_SOFT_RST) {
- SkMacSoftRst(pAC, IoC, Port);
- }
- else {
- SkMacHardRst(pAC, IoC, Port);
- }
-
- /* Disable Force Sync bit and Enable Alloc bit */
- SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
- TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
-
- /* Stop Interval Timer and Limit Counter of Tx Arbiter */
- SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
- SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
-
- /* Perform a local reset of the port's Tx path */
-
- /* Reset the PCI FIFO of the async Tx queue */
- SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
- /* Reset the PCI FIFO of the sync Tx queue */
- SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
- /* Reset the RAM Buffer async Tx queue */
- SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
- /* Reset the RAM Buffer sync Tx queue */
- SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
-
- /* Reset Tx MAC FIFO */
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- /* Note: MFF_RST_SET does NOT reset the XMAC ! */
- SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
-
- /* switch Link and Tx LED off, stop the LED counters */
- /* Link LED is switched off by the RLMT and the Diag itself */
- SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
- /* Reset TX MAC FIFO */
- SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
- }
-#endif /* YUKON */
- }
-
- if ((Dir & SK_STOP_RX) != 0) {
- /*
- * The RX Stop Command will not terminate if no buffers
- * are queued in the RxD ring. But it will always reach
- * the Idle state. Therefore we can use this feature to
- * stop the transfer of received packets.
- */
- /* stop the port's receive queue */
- SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
-
- i = 100;
- do {
- /*
- * Clear packet arbiter timeout to make sure
- * this loop will terminate
- */
- SK_OUT16(IoC, B3_PA_CTRL, (SK_U16)((Port == MAC_1) ?
- PA_CLR_TO_RX1 : PA_CLR_TO_RX2));
-
- DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
-
- /* timeout if i==0 (bug fix for #10748) */
- if (--i == 0) {
- SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
- SKERR_HWI_E024MSG);
- break;
- }
- /*
- * because of the ASIC problem report entry from 21.08.98
- * it is required to wait until CSR_STOP is reset and
- * CSR_SV_IDLE is set.
- */
- } while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
-
- /* The path data transfer activity is fully stopped now */
-
- /* Perform a local reset of the port's Rx path */
-
- /* Reset the PCI FIFO of the Rx queue */
- SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
- /* Reset the RAM Buffer receive queue */
- SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
-
- /* Reset Rx MAC FIFO */
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
-
- SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
-
- /* switch Rx LED off, stop the LED counter */
- SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
- /* Reset Rx MAC FIFO */
- SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
- }
-#endif /* YUKON */
- }
-} /* SkGeStopPort */
-
-
-/******************************************************************************
- *
- * SkGeInit0() - Level 0 Initialization
- *
- * Description:
- * - Initialize the BMU address offsets
- *
- * Returns:
- * nothing
- */
-static void SkGeInit0(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- int i;
- SK_GEPORT *pPrt;
-
- for (i = 0; i < SK_MAX_MACS; i++) {
- pPrt = &pAC->GIni.GP[i];
-
- pPrt->PState = SK_PRT_RESET;
- pPrt->PRxQOff = QOffTab[i].RxQOff;
- pPrt->PXsQOff = QOffTab[i].XsQOff;
- pPrt->PXaQOff = QOffTab[i].XaQOff;
- pPrt->PCheckPar = SK_FALSE;
- pPrt->PIsave = 0;
- pPrt->PPrevShorts = 0;
- pPrt->PLinkResCt = 0;
- pPrt->PAutoNegTOCt = 0;
- pPrt->PPrevRx = 0;
- pPrt->PPrevFcs = 0;
- pPrt->PRxLim = SK_DEF_RX_WA_LIM;
- pPrt->PLinkMode = (SK_U8)SK_LMODE_AUTOFULL;
- pPrt->PLinkSpeedCap = (SK_U8)SK_LSPEED_CAP_1000MBPS;
- pPrt->PLinkSpeed = (SK_U8)SK_LSPEED_1000MBPS;
- pPrt->PLinkSpeedUsed = (SK_U8)SK_LSPEED_STAT_UNKNOWN;
- pPrt->PLinkModeConf = (SK_U8)SK_LMODE_AUTOSENSE;
- pPrt->PFlowCtrlMode = (SK_U8)SK_FLOW_MODE_SYM_OR_REM;
- pPrt->PLinkCap = (SK_U8)(SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
- SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
- pPrt->PLinkModeStatus = (SK_U8)SK_LMODE_STAT_UNKNOWN;
- pPrt->PFlowCtrlCap = (SK_U8)SK_FLOW_MODE_SYM_OR_REM;
- pPrt->PFlowCtrlStatus = (SK_U8)SK_FLOW_STAT_NONE;
- pPrt->PMSCap = 0;
- pPrt->PMSMode = (SK_U8)SK_MS_MODE_AUTO;
- pPrt->PMSStatus = (SK_U8)SK_MS_STAT_UNSET;
- pPrt->PLipaAutoNeg = (SK_U8)SK_LIPA_UNKNOWN;
- pPrt->PAutoNegFail = SK_FALSE;
- pPrt->PHWLinkUp = SK_FALSE;
- pPrt->PLinkBroken = SK_TRUE; /* See WA code */
- pPrt->PPhyPowerState = PHY_PM_OPERATIONAL_MODE;
- pPrt->PMacColThres = TX_COL_DEF;
- pPrt->PMacJamLen = TX_JAM_LEN_DEF;
- pPrt->PMacJamIpgVal = TX_JAM_IPG_DEF;
- pPrt->PMacJamIpgData = TX_IPG_JAM_DEF;
- pPrt->PMacIpgData = IPG_DATA_DEF;
- pPrt->PMacLimit4 = SK_FALSE;
- }
-
- pAC->GIni.GIPortUsage = SK_RED_LINK;
- pAC->GIni.GILedBlinkCtrl = (SK_U16)OemConfig.Value;
- pAC->GIni.GIValIrqMask = IS_ALL_MSK;
-
-} /* SkGeInit0*/
-
-
-/******************************************************************************
- *
- * SkGeInit1() - Level 1 Initialization
- *
- * Description:
- * o Do a software reset.
- * o Clear all reset bits.
- * o Verify that the detected hardware is present.
- * Return an error if not.
- * o Get the hardware configuration
- * + Read the number of MACs/Ports.
- * + Read the RAM size.
- * + Read the PCI Revision Id.
- * + Find out the adapters host clock speed
- * + Read and check the PHY type
- *
- * Returns:
- * 0: success
- * 5: Unexpected PHY type detected
- * 6: HW self test failed
- */
-static int SkGeInit1(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- SK_U8 Byte;
- SK_U16 Word;
- SK_U16 CtrlStat;
- SK_U32 DWord;
- int RetVal;
- int i;
-
- RetVal = 0;
-
- /* save CLK_RUN bits (YUKON-Lite) */
- SK_IN16(IoC, B0_CTST, &CtrlStat);
-
- /* do the SW-reset */
- SK_OUT8(IoC, B0_CTST, CS_RST_SET);
-
- /* release the SW-reset */
- SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
-
- /* reset all error bits in the PCI STATUS register */
- /*
- * Note: PCI Cfg cycles cannot be used, because they are not
- * available on some platforms after 'boot time'.
- */
- SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- /* release Master Reset */
- SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
-
-#ifdef CLK_RUN
- CtrlStat |= CS_CLK_RUN_ENA;
-#endif /* CLK_RUN */
-
- /* restore CLK_RUN bits */
- SK_OUT16(IoC, B0_CTST, (SK_U16)(CtrlStat &
- (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA)));
-
- /* read Chip Identification Number */
- SK_IN8(IoC, B2_CHIP_ID, &Byte);
- pAC->GIni.GIChipId = Byte;
-
- /* read number of MACs */
- SK_IN8(IoC, B2_MAC_CFG, &Byte);
- pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
-
- /* get Chip Revision Number */
- pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
-
- /* get diff. PCI parameters */
- SK_IN16(IoC, B0_CTST, &CtrlStat);
-
- /* read the adapters RAM size */
- SK_IN8(IoC, B2_E_0, &Byte);
-
- pAC->GIni.GIGenesis = SK_FALSE;
- pAC->GIni.GIYukon = SK_FALSE;
- pAC->GIni.GIYukonLite = SK_FALSE;
-
-#ifdef GENESIS
- if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
-
- pAC->GIni.GIGenesis = SK_TRUE;
-
- if (Byte == (SK_U8)3) {
- /* special case: 4 x 64k x 36, offset = 0x80000 */
- pAC->GIni.GIRamSize = 1024;
- pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
- }
- else {
- pAC->GIni.GIRamSize = (int)Byte * 512;
- pAC->GIni.GIRamOffs = 0;
- }
- /* all GE adapters work with 53.125 MHz host clock */
- pAC->GIni.GIHstClkFact = SK_FACT_53;
-
- /* set Descr. Poll Timer Init Value to 250 ms */
- pAC->GIni.GIPollTimerVal =
- SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIChipId != CHIP_ID_GENESIS) {
-
- pAC->GIni.GIYukon = SK_TRUE;
-
- pAC->GIni.GIRamSize = (Byte == (SK_U8)0) ? 128 : (int)Byte * 4;
-
- pAC->GIni.GIRamOffs = 0;
-
- /* WA for chip Rev. A */
- pAC->GIni.GIWolOffs = (pAC->GIni.GIChipId == CHIP_ID_YUKON &&
- pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
-
- /* get PM Capabilities of PCI config space */
- SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
-
- /* check if VAUX is available */
- if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
- /* check also if PME from D3cold is set */
- ((Word & PCI_PME_D3C_SUP) != 0)) {
- /* set entry in GE init struct */
- pAC->GIni.GIVauxAvail = SK_TRUE;
- }
-
- if (pAC->GIni.GIChipId == CHIP_ID_YUKON_LITE) {
- /* this is Rev. A1 */
- pAC->GIni.GIYukonLite = SK_TRUE;
- }
- else {
- /* save Flash-Address Register */
- SK_IN32(IoC, B2_FAR, &DWord);
-
- /* test Flash-Address Register */
- SK_OUT8(IoC, B2_FAR + 3, 0xff);
- SK_IN8(IoC, B2_FAR + 3, &Byte);
-
- if (Byte != 0) {
- /* this is Rev. A0 */
- pAC->GIni.GIYukonLite = SK_TRUE;
-
- /* restore Flash-Address Register */
- SK_OUT32(IoC, B2_FAR, DWord);
- }
- }
-
- /* switch power to VCC (WA for VAUX problem) */
- SK_OUT8(IoC, B0_POWER_CTRL, (SK_U8)(PC_VAUX_ENA | PC_VCC_ENA |
- PC_VAUX_OFF | PC_VCC_ON));
-
- /* read the Interrupt source */
- SK_IN32(IoC, B0_ISRC, &DWord);
-
- if ((DWord & IS_HW_ERR) != 0) {
- /* read the HW Error Interrupt source */
- SK_IN32(IoC, B0_HWE_ISRC, &DWord);
-
- if ((DWord & IS_IRQ_SENSOR) != 0) {
- /* disable HW Error IRQ */
- pAC->GIni.GIValIrqMask &= ~IS_HW_ERR;
- }
- }
-
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
- /* set GMAC Link Control reset */
- SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
-
- /* clear GMAC Link Control reset */
- SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
- }
- /* all YU chips work with 78.125 MHz host clock */
- pAC->GIni.GIHstClkFact = SK_FACT_78;
-
- pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */
- }
-#endif /* YUKON */
-
- /* check if 64-bit PCI Slot is present */
- pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
-
- /* check if 66 MHz PCI Clock is active */
- pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
-
- /* read PCI HW Revision Id. */
- SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
- pAC->GIni.GIPciHwRev = Byte;
-
- /* read the PMD type */
- SK_IN8(IoC, B2_PMD_TYP, &Byte);
- pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
-
- /* read the PHY type */
- SK_IN8(IoC, B2_E_1, &Byte);
-
- Byte &= 0x0f; /* the PHY type is stored in the lower nibble */
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- switch (Byte) {
- case SK_PHY_XMAC:
- pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
- break;
- case SK_PHY_BCOM:
- pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
- pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO |
- SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE);
- break;
-#ifdef OTHER_PHY
- case SK_PHY_LONE:
- pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
- break;
- case SK_PHY_NAT:
- pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
- break;
-#endif /* OTHER_PHY */
- default:
- /* ERROR: unexpected PHY type detected */
- RetVal = 5;
- break;
- }
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- if (Byte < (SK_U8)SK_PHY_MARV_COPPER) {
- /* if this field is not initialized */
- Byte = (SK_U8)SK_PHY_MARV_COPPER;
-
- pAC->GIni.GICopperType = SK_TRUE;
- }
-
- pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
-
- if (pAC->GIni.GICopperType) {
-
- pAC->GIni.GP[i].PLinkSpeedCap = (SK_U8)(SK_LSPEED_CAP_AUTO |
- SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
- SK_LSPEED_CAP_1000MBPS);
-
- pAC->GIni.GP[i].PLinkSpeed = (SK_U8)SK_LSPEED_AUTO;
-
- pAC->GIni.GP[i].PMSCap = (SK_U8)(SK_MS_CAP_AUTO |
- SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE);
- }
- else {
- Byte = (SK_U8)SK_PHY_MARV_FIBER;
- }
- }
-#endif /* YUKON */
-
- pAC->GIni.GP[i].PhyType = (int)Byte;
-
- SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
- ("PHY type: %d PHY addr: %04x\n", Byte,
- pAC->GIni.GP[i].PhyAddr));
- }
-
- /* get MAC Type & set function pointers dependent on */
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
-
- pAC->GIni.GIMacType = SK_MAC_XMAC;
-
- pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats;
- pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic;
- pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter;
- pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus;
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- pAC->GIni.GIMacType = SK_MAC_GMAC;
-
- pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats;
- pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic;
- pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter;
- pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus;
-
-#ifdef SPECIAL_HANDLING
- if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
- /* check HW self test result */
- SK_IN8(IoC, B2_E_3, &Byte);
- if (Byte & B2_E3_RES_MASK) {
- RetVal = 6;
- }
- }
-#endif
- }
-#endif /* YUKON */
-
- return(RetVal);
-} /* SkGeInit1 */
-
-
-/******************************************************************************
- *
- * SkGeInit2() - Level 2 Initialization
- *
- * Description:
- * - start the Blink Source Counter
- * - start the Descriptor Poll Timer
- * - configure the MAC-Arbiter
- * - configure the Packet-Arbiter
- * - enable the Tx Arbiters
- * - enable the RAM Interface Arbiter
- *
- * Returns:
- * nothing
- */
-static void SkGeInit2(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
-#ifdef GENESIS
- SK_U32 DWord;
-#endif /* GENESIS */
- int i;
-
- /* start the Descriptor Poll Timer */
- if (pAC->GIni.GIPollTimerVal != 0) {
- if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
- pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
-
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
- }
- SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
- SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
- }
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- /* start the Blink Source Counter */
- DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
-
- SK_OUT32(IoC, B2_BSC_INI, DWord);
- SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
-
- /*
- * Configure the MAC Arbiter and the Packet Arbiter.
- * They will be started once and never be stopped.
- */
- SkGeInitMacArb(pAC, IoC);
-
- SkGeInitPktArb(pAC, IoC);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
- /* start Time Stamp Timer */
- SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
- }
-#endif /* YUKON */
-
- /* enable the Tx Arbiters */
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
- SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
- }
-
- /* enable the RAM Interface Arbiter */
- SkGeInitRamIface(pAC, IoC);
-
-} /* SkGeInit2 */
-
-/******************************************************************************
- *
- * SkGeInit() - Initialize the GE Adapter with the specified level.
- *
- * Description:
- * Level 0: Initialize the Module structures.
- * Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has
- * to be set before calling this level.
- *
- * o Do a software reset.
- * o Clear all reset bits.
- * o Verify that the detected hardware is present.
- * Return an error if not.
- * o Get the hardware configuration
- * + Set GIMacsFound with the number of MACs.
- * + Store the RAM size in GIRamSize.
- * + Save the PCI Revision ID in GIPciHwRev.
- * o return an error
- * if Number of MACs > SK_MAX_MACS
- *
- * After returning from Level 0 the adapter
- * may be accessed with IO operations.
- *
- * Level 2: start the Blink Source Counter
- *
- * Returns:
- * 0: success
- * 1: Number of MACs exceeds SK_MAX_MACS (after level 1)
- * 2: Adapter not present or not accessible
- * 3: Illegal initialization level
- * 4: Initialization Level 1 Call missing
- * 5: Unexpected PHY type detected
- * 6: HW self test failed
- */
-int SkGeInit(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Level) /* initialization level */
-{
- int RetVal; /* return value */
- SK_U32 DWord;
-
- RetVal = 0;
- SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
- ("SkGeInit(Level %d)\n", Level));
-
- switch (Level) {
- case SK_INIT_DATA:
- /* Initialization Level 0 */
- SkGeInit0(pAC, IoC);
- pAC->GIni.GILevel = SK_INIT_DATA;
- break;
-
- case SK_INIT_IO:
- /* Initialization Level 1 */
- RetVal = SkGeInit1(pAC, IoC);
- if (RetVal != 0) {
- break;
- }
-
- /* check if the adapter seems to be accessible */
- SK_OUT32(IoC, B2_IRQM_INI, SK_TEST_VAL);
- SK_IN32(IoC, B2_IRQM_INI, &DWord);
- SK_OUT32(IoC, B2_IRQM_INI, 0L);
-
- if (DWord != SK_TEST_VAL) {
- RetVal = 2;
- break;
- }
-
- /* check if the number of GIMacsFound matches SK_MAX_MACS */
- if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
- RetVal = 1;
- break;
- }
-
- /* Level 1 successfully passed */
- pAC->GIni.GILevel = SK_INIT_IO;
- break;
-
- case SK_INIT_RUN:
- /* Initialization Level 2 */
- if (pAC->GIni.GILevel != SK_INIT_IO) {
-#ifndef SK_DIAG
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
-#endif /* !SK_DIAG */
- RetVal = 4;
- break;
- }
- SkGeInit2(pAC, IoC);
-
- /* Level 2 successfully passed */
- pAC->GIni.GILevel = SK_INIT_RUN;
- break;
-
- default:
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
- RetVal = 3;
- break;
- }
-
- return(RetVal);
-} /* SkGeInit */
-
-
-/******************************************************************************
- *
- * SkGeDeInit() - Deinitialize the adapter
- *
- * Description:
- * All ports of the adapter will be stopped if not already done.
- * Do a software reset and switch off all LEDs.
- *
- * Returns:
- * nothing
- */
-void SkGeDeInit(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC) /* IO context */
-{
- int i;
- SK_U16 Word;
-
-#if (!defined(SK_SLIM) && !defined(VCPU))
- /* ensure I2C is ready */
- SkI2cWaitIrq(pAC, IoC);
-#endif
-
- /* stop all current transfer activity */
- for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
- if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
- pAC->GIni.GP[i].PState != SK_PRT_RESET) {
-
- SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
- }
- }
-
- /* Reset all bits in the PCI STATUS register */
- /*
- * Note: PCI Cfg cycles cannot be used, because they are not
- * available on some platforms after 'boot time'.
- */
- SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
-
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- SK_OUT16(IoC, PCI_C(PCI_STATUS), (SK_U16)(Word | PCI_ERRBITS));
- SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
-
- /* do the reset, all LEDs are switched off now */
- SK_OUT8(IoC, B0_CTST, CS_RST_SET);
-
- pAC->GIni.GILevel = SK_INIT_DATA;
-} /* SkGeDeInit */
-
-
-/******************************************************************************
- *
- * SkGeInitPort() Initialize the specified port.
- *
- * Description:
- * PRxQSize, PXSQSize, and PXAQSize has to be
- * configured for the specified port before calling this function.
- * The descriptor rings has to be initialized too.
- *
- * o (Re)configure queues of the specified port.
- * o configure the MAC of the specified port.
- * o put ASIC and MAC(s) in operational mode.
- * o initialize Rx/Tx and Sync LED
- * o initialize RAM Buffers and MAC FIFOs
- *
- * The port is ready to connect when returning.
- *
- * Note:
- * The MAC's Rx and Tx state machine is still disabled when returning.
- *
- * Returns:
- * 0: success
- * 1: Queue size initialization error. The configured values
- * for PRxQSize, PXSQSize, or PXAQSize are invalid for one
- * or more queues. The specified port was NOT initialized.
- * An error log entry was generated.
- * 2: The port has to be stopped before it can be initialized again.
- */
-int SkGeInitPort(
-SK_AC *pAC, /* adapter context */
-SK_IOC IoC, /* IO context */
-int Port) /* Port to configure */
-{
- SK_GEPORT *pPrt;
-
- pPrt = &pAC->GIni.GP[Port];
-
- if (SkGeCheckQSize(pAC, Port) != 0) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
- return(1);
- }
-
- if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
- SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
- return(2);
- }
-
- /* configuration ok, initialize the Port now */
-
-#ifdef GENESIS
- if (pAC->GIni.GIGenesis) {
- /* initialize Rx, Tx and Link LED */
- /*
- * If 1000BT Phy needs LED initialization than swap
- * LED and XMAC initialization order
- */
- SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
- SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
- /* The Link LED is initialized by RLMT or Diagnostics itself */
-
- SkXmInitMac(pAC, IoC, Port);
- }
-#endif /* GENESIS */
-
-#ifdef YUKON
- if (pAC->GIni.GIYukon) {
-
- SkGmInitMac(pAC, IoC, Port);
- }
-#endif /* YUKON */
-
- /* do NOT initialize the Link Sync Counter */
-
- SkGeInitMacFifo(pAC, IoC, Port);
-
- SkGeInitRamBufs(pAC, IoC, Port);
-
- if (pPrt->PXSQSize != 0) {
- /* enable Force Sync bit if synchronous queue available */
- SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
- }
-
- SkGeInitBmu(pAC, IoC, Port);
-
- /* mark port as initialized */
- pPrt->PState = SK_PRT_INIT;
-
- return(0);
-} /* SkGeInitPort */