summaryrefslogtreecommitdiff
path: root/drivers/net/tc35815.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tc35815.c')
-rw-r--r--drivers/net/tc35815.c1701
1 files changed, 601 insertions, 1100 deletions
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index 370d329d15d9..10e4e85da3fc 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -23,9 +23,9 @@
*/
#ifdef TC35815_NAPI
-#define DRV_VERSION "1.36-NAPI"
+#define DRV_VERSION "1.37-NAPI"
#else
-#define DRV_VERSION "1.36"
+#define DRV_VERSION "1.37"
#endif
static const char *version = "tc35815.c:v" DRV_VERSION "\n";
#define MODNAME "tc35815"
@@ -47,8 +47,8 @@ static const char *version = "tc35815.c:v" DRV_VERSION "\n";
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/byteorder.h>
@@ -60,16 +60,16 @@ static const char *version = "tc35815.c:v" DRV_VERSION "\n";
#define WORKAROUND_100HALF_PROMISC
/* #define TC35815_USE_PACKEDBUFFER */
-typedef enum {
+enum tc35815_chiptype {
TC35815CF = 0,
TC35815_NWU,
TC35815_TX4939,
-} board_t;
+};
-/* indexed by board_t, above */
+/* indexed by tc35815_chiptype, above */
static const struct {
const char *name;
-} board_info[] __devinitdata = {
+} chip_info[] __devinitdata = {
{ "TOSHIBA TC35815CF 10/100BaseTX" },
{ "TOSHIBA TC35815 with Wake on LAN" },
{ "TOSHIBA TC35815/TX4939" },
@@ -81,209 +81,208 @@ static const struct pci_device_id tc35815_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939), .driver_data = TC35815_TX4939 },
{0,}
};
-MODULE_DEVICE_TABLE (pci, tc35815_pci_tbl);
+MODULE_DEVICE_TABLE(pci, tc35815_pci_tbl);
/* see MODULE_PARM_DESC */
static struct tc35815_options {
int speed;
int duplex;
- int doforce;
} options;
/*
* Registers
*/
struct tc35815_regs {
- volatile __u32 DMA_Ctl; /* 0x00 */
- volatile __u32 TxFrmPtr;
- volatile __u32 TxThrsh;
- volatile __u32 TxPollCtr;
- volatile __u32 BLFrmPtr;
- volatile __u32 RxFragSize;
- volatile __u32 Int_En;
- volatile __u32 FDA_Bas;
- volatile __u32 FDA_Lim; /* 0x20 */
- volatile __u32 Int_Src;
- volatile __u32 unused0[2];
- volatile __u32 PauseCnt;
- volatile __u32 RemPauCnt;
- volatile __u32 TxCtlFrmStat;
- volatile __u32 unused1;
- volatile __u32 MAC_Ctl; /* 0x40 */
- volatile __u32 CAM_Ctl;
- volatile __u32 Tx_Ctl;
- volatile __u32 Tx_Stat;
- volatile __u32 Rx_Ctl;
- volatile __u32 Rx_Stat;
- volatile __u32 MD_Data;
- volatile __u32 MD_CA;
- volatile __u32 CAM_Adr; /* 0x60 */
- volatile __u32 CAM_Data;
- volatile __u32 CAM_Ena;
- volatile __u32 PROM_Ctl;
- volatile __u32 PROM_Data;
- volatile __u32 Algn_Cnt;
- volatile __u32 CRC_Cnt;
- volatile __u32 Miss_Cnt;
+ __u32 DMA_Ctl; /* 0x00 */
+ __u32 TxFrmPtr;
+ __u32 TxThrsh;
+ __u32 TxPollCtr;
+ __u32 BLFrmPtr;
+ __u32 RxFragSize;
+ __u32 Int_En;
+ __u32 FDA_Bas;
+ __u32 FDA_Lim; /* 0x20 */
+ __u32 Int_Src;
+ __u32 unused0[2];
+ __u32 PauseCnt;
+ __u32 RemPauCnt;
+ __u32 TxCtlFrmStat;
+ __u32 unused1;
+ __u32 MAC_Ctl; /* 0x40 */
+ __u32 CAM_Ctl;
+ __u32 Tx_Ctl;
+ __u32 Tx_Stat;
+ __u32 Rx_Ctl;
+ __u32 Rx_Stat;
+ __u32 MD_Data;
+ __u32 MD_CA;
+ __u32 CAM_Adr; /* 0x60 */
+ __u32 CAM_Data;
+ __u32 CAM_Ena;
+ __u32 PROM_Ctl;
+ __u32 PROM_Data;
+ __u32 Algn_Cnt;
+ __u32 CRC_Cnt;
+ __u32 Miss_Cnt;
};
/*
* Bit assignments
*/
/* DMA_Ctl bit asign ------------------------------------------------------- */
-#define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
-#define DMA_RxAlign_1 0x00400000
-#define DMA_RxAlign_2 0x00800000
-#define DMA_RxAlign_3 0x00c00000
-#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
-#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
-#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
-#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
-#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
-#define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */
-#define DMA_TestMode 0x00002000 /* 1:Test Mode */
-#define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
-#define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
+#define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
+#define DMA_RxAlign_1 0x00400000
+#define DMA_RxAlign_2 0x00800000
+#define DMA_RxAlign_3 0x00c00000
+#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
+#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
+#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
+#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
+#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
+#define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */
+#define DMA_TestMode 0x00002000 /* 1:Test Mode */
+#define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
+#define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
/* RxFragSize bit asign ---------------------------------------------------- */
-#define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
-#define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
+#define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
+#define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
/* MAC_Ctl bit asign ------------------------------------------------------- */
-#define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
-#define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
-#define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
-#define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */
-#define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */
-#define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/
-#define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */
-#define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */
-#define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */
-#define MAC_Reset 0x00000004 /* 1:Software Reset */
-#define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
-#define MAC_HaltReq 0x00000001 /* 1:Halt request */
+#define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
+#define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
+#define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
+#define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */
+#define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */
+#define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/
+#define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */
+#define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */
+#define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */
+#define MAC_Reset 0x00000004 /* 1:Software Reset */
+#define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
+#define MAC_HaltReq 0x00000001 /* 1:Halt request */
/* PROM_Ctl bit asign ------------------------------------------------------ */
-#define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
-#define PROM_Read 0x00004000 /*10:Read operation */
-#define PROM_Write 0x00002000 /*01:Write operation */
-#define PROM_Erase 0x00006000 /*11:Erase operation */
- /*00:Enable or Disable Writting, */
- /* as specified in PROM_Addr. */
-#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
- /*00xxxx: disable */
+#define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
+#define PROM_Read 0x00004000 /*10:Read operation */
+#define PROM_Write 0x00002000 /*01:Write operation */
+#define PROM_Erase 0x00006000 /*11:Erase operation */
+ /*00:Enable or Disable Writting, */
+ /* as specified in PROM_Addr. */
+#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
+ /*00xxxx: disable */
/* CAM_Ctl bit asign ------------------------------------------------------- */
-#define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
-#define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
- /* accept other */
-#define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */
-#define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
-#define CAM_StationAcc 0x00000001 /* 1:unicast accept */
+#define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
+#define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
+ /* accept other */
+#define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */
+#define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
+#define CAM_StationAcc 0x00000001 /* 1:unicast accept */
/* CAM_Ena bit asign ------------------------------------------------------- */
-#define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
+#define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
#define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */
-#define CAM_Ena_Bit(index) (1<<(index))
+#define CAM_Ena_Bit(index) (1 << (index))
#define CAM_ENTRY_DESTINATION 0
#define CAM_ENTRY_SOURCE 1
#define CAM_ENTRY_MACCTL 20
/* Tx_Ctl bit asign -------------------------------------------------------- */
-#define Tx_En 0x00000001 /* 1:Transmit enable */
-#define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
-#define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
-#define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */
-#define Tx_FBack 0x00000010 /* 1:Fast Back-off */
-#define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */
-#define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */
-#define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */
-#define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */
-#define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */
-#define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
-#define Tx_EnComp 0x00004000 /* 1:Enable Completion */
+#define Tx_En 0x00000001 /* 1:Transmit enable */
+#define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
+#define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
+#define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */
+#define Tx_FBack 0x00000010 /* 1:Fast Back-off */
+#define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */
+#define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */
+#define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */
+#define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */
+#define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */
+#define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
+#define Tx_EnComp 0x00004000 /* 1:Enable Completion */
/* Tx_Stat bit asign ------------------------------------------------------- */
-#define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
-#define Tx_ExColl 0x00000010 /* Excessive Collision */
-#define Tx_TXDefer 0x00000020 /* Transmit Defered */
-#define Tx_Paused 0x00000040 /* Transmit Paused */
-#define Tx_IntTx 0x00000080 /* Interrupt on Tx */
-#define Tx_Under 0x00000100 /* Underrun */
-#define Tx_Defer 0x00000200 /* Deferral */
-#define Tx_NCarr 0x00000400 /* No Carrier */
-#define Tx_10Stat 0x00000800 /* 10Mbps Status */
-#define Tx_LateColl 0x00001000 /* Late Collision */
-#define Tx_TxPar 0x00002000 /* Tx Parity Error */
-#define Tx_Comp 0x00004000 /* Completion */
-#define Tx_Halted 0x00008000 /* Tx Halted */
-#define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
+#define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
+#define Tx_ExColl 0x00000010 /* Excessive Collision */
+#define Tx_TXDefer 0x00000020 /* Transmit Defered */
+#define Tx_Paused 0x00000040 /* Transmit Paused */
+#define Tx_IntTx 0x00000080 /* Interrupt on Tx */
+#define Tx_Under 0x00000100 /* Underrun */
+#define Tx_Defer 0x00000200 /* Deferral */
+#define Tx_NCarr 0x00000400 /* No Carrier */
+#define Tx_10Stat 0x00000800 /* 10Mbps Status */
+#define Tx_LateColl 0x00001000 /* Late Collision */
+#define Tx_TxPar 0x00002000 /* Tx Parity Error */
+#define Tx_Comp 0x00004000 /* Completion */
+#define Tx_Halted 0x00008000 /* Tx Halted */
+#define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
/* Rx_Ctl bit asign -------------------------------------------------------- */
-#define Rx_EnGood 0x00004000 /* 1:Enable Good */
-#define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
-#define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
-#define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */
-#define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */
-#define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */
-#define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */
-#define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */
-#define Rx_ShortEn 0x00000008 /* 1:Short Enable */
-#define Rx_LongEn 0x00000004 /* 1:Long Enable */
-#define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
-#define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
+#define Rx_EnGood 0x00004000 /* 1:Enable Good */
+#define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
+#define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
+#define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */
+#define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */
+#define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */
+#define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */
+#define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */
+#define Rx_ShortEn 0x00000008 /* 1:Short Enable */
+#define Rx_LongEn 0x00000004 /* 1:Long Enable */
+#define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
+#define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
/* Rx_Stat bit asign ------------------------------------------------------- */
-#define Rx_Halted 0x00008000 /* Rx Halted */
-#define Rx_Good 0x00004000 /* Rx Good */
-#define Rx_RxPar 0x00002000 /* Rx Parity Error */
- /* 0x00001000 not use */
-#define Rx_LongErr 0x00000800 /* Rx Long Error */
-#define Rx_Over 0x00000400 /* Rx Overflow */
-#define Rx_CRCErr 0x00000200 /* Rx CRC Error */
-#define Rx_Align 0x00000100 /* Rx Alignment Error */
-#define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */
-#define Rx_IntRx 0x00000040 /* Rx Interrupt */
-#define Rx_CtlRecd 0x00000020 /* Rx Control Receive */
-
-#define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */
+#define Rx_Halted 0x00008000 /* Rx Halted */
+#define Rx_Good 0x00004000 /* Rx Good */
+#define Rx_RxPar 0x00002000 /* Rx Parity Error */
+ /* 0x00001000 not use */
+#define Rx_LongErr 0x00000800 /* Rx Long Error */
+#define Rx_Over 0x00000400 /* Rx Overflow */
+#define Rx_CRCErr 0x00000200 /* Rx CRC Error */
+#define Rx_Align 0x00000100 /* Rx Alignment Error */
+#define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */
+#define Rx_IntRx 0x00000040 /* Rx Interrupt */
+#define Rx_CtlRecd 0x00000020 /* Rx Control Receive */
+
+#define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */
/* Int_En bit asign -------------------------------------------------------- */
-#define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
-#define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Control Complete Enable */
-#define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
-#define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */
-#define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */
-#define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */
-#define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */
-#define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */
-#define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */
-#define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */
-#define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */
-#define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
- /* Exhausted Enable */
+#define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
+#define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Ctl Complete Enable */
+#define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
+#define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */
+#define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */
+#define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */
+#define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */
+#define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */
+#define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */
+#define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */
+#define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */
+#define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
+ /* Exhausted Enable */
/* Int_Src bit asign ------------------------------------------------------- */
-#define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
-#define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
-#define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
-#define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */
-#define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */
-#define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */
-#define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */
-#define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */
-#define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */
-#define Int_SWInt 0x00000020 /* 1:Software request & Clear */
-#define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */
-#define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */
-#define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */
-#define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
-#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
+#define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
+#define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
+#define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
+#define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */
+#define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */
+#define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */
+#define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */
+#define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */
+#define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */
+#define Int_SWInt 0x00000020 /* 1:Software request & Clear */
+#define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */
+#define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */
+#define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */
+#define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
+#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
-#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
-#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
+#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
+#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
+#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
/*
@@ -307,24 +306,24 @@ struct BDesc {
#define FD_ALIGN 16
/* Frame Descripter bit asign ---------------------------------------------- */
-#define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
-#define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
-#define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
+#define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
+#define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
+#define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
#define FD_FrmOpt_BigEndian 0x40000000 /* Tx/Rx */
-#define FD_FrmOpt_IntTx 0x20000000 /* Tx only */
-#define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */
+#define FD_FrmOpt_IntTx 0x20000000 /* Tx only */
+#define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */
#define FD_FrmOpt_NoPadding 0x08000000 /* Tx only */
#define FD_FrmOpt_Packing 0x04000000 /* Rx only */
-#define FD_CownsFD 0x80000000 /* FD Controller owner bit */
-#define FD_Next_EOL 0x00000001 /* FD EOL indicator */
-#define FD_BDCnt_SHIFT 16
+#define FD_CownsFD 0x80000000 /* FD Controller owner bit */
+#define FD_Next_EOL 0x00000001 /* FD EOL indicator */
+#define FD_BDCnt_SHIFT 16
/* Buffer Descripter bit asign --------------------------------------------- */
-#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
-#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
-#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
-#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
-#define BD_RxBDID_SHIFT 16
+#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
+#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
+#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
+#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
+#define BD_RxBDID_SHIFT 16
#define BD_RxBDSeqN_SHIFT 24
@@ -348,13 +347,15 @@ struct BDesc {
Int_STargAbtEn | \
Int_BLExEn | Int_FDAExEn) /* maybe 0xb7f*/
#define DMA_CTL_CMD DMA_BURST_SIZE
-#define HAVE_DMA_RXALIGN(lp) likely((lp)->boardtype != TC35815CF)
+#define HAVE_DMA_RXALIGN(lp) likely((lp)->chiptype != TC35815CF)
/* Tuning parameters */
#define DMA_BURST_SIZE 32
#define TX_THRESHOLD 1024
-#define TX_THRESHOLD_MAX 1536 /* used threshold with packet max byte for low pci transfer ability.*/
-#define TX_THRESHOLD_KEEP_LIMIT 10 /* setting threshold max value when overrun error occured this count. */
+/* used threshold with packet max byte for low pci transfer ability.*/
+#define TX_THRESHOLD_MAX 1536
+/* setting threshold max value when overrun error occured this count. */
+#define TX_THRESHOLD_KEEP_LIMIT 10
/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
#ifdef TC35815_USE_PACKEDBUFFER
@@ -396,21 +397,12 @@ struct FrFD {
};
-#define tc_readl(addr) readl(addr)
-#define tc_writel(d, addr) writel(d, addr)
+#define tc_readl(addr) ioread32(addr)
+#define tc_writel(d, addr) iowrite32(d, addr)
#define TC35815_TX_TIMEOUT msecs_to_jiffies(400)
-/* Timer state engine. */
-enum tc35815_timer_state {
- arbwait = 0, /* Waiting for auto negotiation to complete. */
- lupwait = 1, /* Auto-neg complete, awaiting link-up status. */
- ltrywait = 2, /* Forcing try of all modes, from fastest to slowest. */
- asleep = 3, /* Time inactive. */
- lcheck = 4, /* Check link status. */
-};
-
-/* Information that need to be kept for each board. */
+/* Information that need to be kept for each controller. */
struct tc35815_local {
struct pci_dev *pci_dev;
@@ -418,12 +410,11 @@ struct tc35815_local {
struct napi_struct napi;
/* statistics */
- struct net_device_stats stats;
struct {
int max_tx_qlen;
int tx_ints;
int rx_ints;
- int tx_underrun;
+ int tx_underrun;
} lstats;
/* Tx control lock. This protects the transmit buffer ring
@@ -433,12 +424,12 @@ struct tc35815_local {
*/
spinlock_t lock;
- int phy_addr;
- int fullduplex;
- unsigned short saved_lpa;
- struct timer_list timer;
- enum tc35815_timer_state timer_state; /* State of auto-neg timer. */
- unsigned int timer_ticks; /* Number of clicks at each state */
+ struct mii_bus mii_bus;
+ struct phy_device *phy_dev;
+ int duplex;
+ int speed;
+ int link;
+ struct work_struct restart_work;
/*
* Transmitting: Batch Mode.
@@ -452,7 +443,7 @@ struct tc35815_local {
* RX_BUF_NUM BD in Free Buffer FD.
* One Free Buffer BD has ETH_FRAME_LEN data buffer.
*/
- void * fd_buf; /* for TxFD, RxFD, FrFD */
+ void *fd_buf; /* for TxFD, RxFD, FrFD */
dma_addr_t fd_buf_dma;
struct TxFD *tfd_base;
unsigned int tfd_start;
@@ -463,7 +454,7 @@ struct tc35815_local {
struct FrFD *fbl_ptr;
#ifdef TC35815_USE_PACKEDBUFFER
unsigned char fbl_curid;
- void * data_buf[RX_BUF_NUM]; /* packing */
+ void *data_buf[RX_BUF_NUM]; /* packing */
dma_addr_t data_buf_dma[RX_BUF_NUM];
struct {
struct sk_buff *skb;
@@ -476,10 +467,8 @@ struct tc35815_local {
dma_addr_t skb_dma;
} tx_skbs[TX_FD_NUM], rx_skbs[RX_BUF_NUM];
#endif
- struct mii_if_info mii;
- unsigned short mii_id[2];
u32 msg_enable;
- board_t boardtype;
+ enum tc35815_chiptype chiptype;
};
static inline dma_addr_t fd_virt_to_bus(struct tc35815_local *lp, void *virt)
@@ -506,13 +495,14 @@ static inline void *rxbuf_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus)
}
#define TC35815_DMA_SYNC_ONDEMAND
-static void* alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
+static void *alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
{
#ifdef TC35815_DMA_SYNC_ONDEMAND
void *buf;
/* pci_map + pci_dma_sync will be more effective than
* pci_alloc_consistent on some archs. */
- if ((buf = (void *)__get_free_page(GFP_ATOMIC)) == NULL)
+ buf = (void *)__get_free_page(GFP_ATOMIC);
+ if (!buf)
return NULL;
*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
PCI_DMA_FROMDEVICE);
@@ -577,7 +567,7 @@ static void tc35815_txdone(struct net_device *dev);
static int tc35815_close(struct net_device *dev);
static struct net_device_stats *tc35815_get_stats(struct net_device *dev);
static void tc35815_set_multicast_list(struct net_device *dev);
-static void tc35815_tx_timeout(struct net_device *dev);
+static void tc35815_tx_timeout(struct net_device *dev);
static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void tc35815_poll_controller(struct net_device *dev);
@@ -585,21 +575,225 @@ static void tc35815_poll_controller(struct net_device *dev);
static const struct ethtool_ops tc35815_ethtool_ops;
/* Example routines you must write ;->. */
-static void tc35815_chip_reset(struct net_device *dev);
-static void tc35815_chip_init(struct net_device *dev);
-static void tc35815_find_phy(struct net_device *dev);
-static void tc35815_phy_chip_init(struct net_device *dev);
+static void tc35815_chip_reset(struct net_device *dev);
+static void tc35815_chip_init(struct net_device *dev);
#ifdef DEBUG
static void panic_queues(struct net_device *dev);
#endif
-static void tc35815_timer(unsigned long data);
-static void tc35815_start_auto_negotiation(struct net_device *dev,
- struct ethtool_cmd *ep);
-static int tc_mdio_read(struct net_device *dev, int phy_id, int location);
-static void tc_mdio_write(struct net_device *dev, int phy_id, int location,
- int val);
+static void tc35815_restart_work(struct work_struct *work);
+
+static int tc_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct net_device *dev = bus->priv;
+ struct tc35815_regs __iomem *tr =
+ (struct tc35815_regs __iomem *)dev->base_addr;
+ unsigned long timeout = jiffies + 10;
+
+ tc_writel(MD_CA_Busy | (mii_id << 5) | (regnum & 0x1f), &tr->MD_CA);
+ while (tc_readl(&tr->MD_CA) & MD_CA_Busy) {
+ if (time_after(jiffies, timeout))
+ return -EIO;
+ cpu_relax();
+ }
+ return tc_readl(&tr->MD_Data) & 0xffff;
+}
+
+static int tc_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 val)
+{
+ struct net_device *dev = bus->priv;
+ struct tc35815_regs __iomem *tr =
+ (struct tc35815_regs __iomem *)dev->base_addr;
+ unsigned long timeout = jiffies + 10;
+
+ tc_writel(val, &tr->MD_Data);
+ tc_writel(MD_CA_Busy | MD_CA_Wr | (mii_id << 5) | (regnum & 0x1f),
+ &tr->MD_CA);
+ while (tc_readl(&tr->MD_CA) & MD_CA_Busy) {
+ if (time_after(jiffies, timeout))
+ return -EIO;
+ cpu_relax();
+ }
+ return 0;
+}
+
+static void tc_handle_link_change(struct net_device *dev)
+{
+ struct tc35815_local *lp = netdev_priv(dev);
+ struct phy_device *phydev = lp->phy_dev;
+ unsigned long flags;
+ int status_change = 0;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ if (phydev->link &&
+ (lp->speed != phydev->speed || lp->duplex != phydev->duplex)) {
+ struct tc35815_regs __iomem *tr =
+ (struct tc35815_regs __iomem *)dev->base_addr;
+ u32 reg;
+
+ reg = tc_readl(&tr->MAC_Ctl);
+ reg |= MAC_HaltReq;
+ tc_writel(reg, &tr->MAC_Ctl);
+ if (phydev->duplex == DUPLEX_FULL)
+ reg |= MAC_FullDup;
+ else
+ reg &= ~MAC_FullDup;
+ tc_writel(reg, &tr->MAC_Ctl);
+ reg &= ~MAC_HaltReq;
+ tc_writel(reg, &tr->MAC_Ctl);
+
+ /*
+ * TX4939 PCFG.SPEEDn bit will be changed on
+ * NETDEV_CHANGE event.
+ */
+
+#if !defined(NO_CHECK_CARRIER) && defined(WORKAROUND_LOSTCAR)
+ /*
+ * WORKAROUND: enable LostCrS only if half duplex
+ * operation.
+ * (TX4939 does not have EnLCarr)
+ */
+ if (phydev->duplex == DUPLEX_HALF &&
+ lp->chiptype != TC35815_TX4939)
+ tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr,
+ &tr->Tx_Ctl);
+#endif
+
+ lp->speed = phydev->speed;
+ lp->duplex = phydev->duplex;
+ status_change = 1;
+ }
+
+ if (phydev->link != lp->link) {
+ if (phydev->link) {
+#ifdef WORKAROUND_100HALF_PROMISC
+ /* delayed promiscuous enabling */
+ if (dev->flags & IFF_PROMISC)
+ tc35815_set_multicast_list(dev);
+#endif
+ netif_schedule(dev);
+ } else {
+ lp->speed = 0;
+ lp->duplex = -1;
+ }
+ lp->link = phydev->link;
+
+ status_change = 1;
+ }
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ if (status_change && netif_msg_link(lp)) {
+ phy_print_status(phydev);
+#ifdef DEBUG
+ printk(KERN_DEBUG
+ "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
+ dev->name,
+ phy_read(phydev, MII_BMCR),
+ phy_read(phydev, MII_BMSR),
+ phy_read(phydev, MII_LPA));
+#endif
+ }
+}
+
+static int tc_mii_probe(struct net_device *dev)
+{
+ struct tc35815_local *lp = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+ u32 dropmask;
+
+ /* find the first phy */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ if (lp->mii_bus.phy_map[phy_addr]) {
+ if (phydev) {
+ printk(KERN_ERR "%s: multiple PHYs found\n",
+ dev->name);
+ return -EINVAL;
+ }
+ phydev = lp->mii_bus.phy_map[phy_addr];
+ break;
+ }
+ }
+
+ if (!phydev) {
+ printk(KERN_ERR "%s: no PHY found\n", dev->name);
+ return -ENODEV;
+ }
+
+ /* attach the mac to the phy */
+ phydev = phy_connect(dev, phydev->dev.bus_id,
+ &tc_handle_link_change, 0,
+ lp->chiptype == TC35815_TX4939 ?
+ PHY_INTERFACE_MODE_RMII : PHY_INTERFACE_MODE_MII);
+ if (IS_ERR(phydev)) {
+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+ printk(KERN_INFO "%s: attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, id=%x)\n",
+ dev->name, phydev->drv->name, phydev->dev.bus_id,
+ phydev->phy_id);
+
+ /* mask with MAC supported features */
+ phydev->supported &= PHY_BASIC_FEATURES;
+ dropmask = 0;
+ if (options.speed == 10)
+ dropmask |= SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
+ else if (options.speed == 100)
+ dropmask |= SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full;
+ if (options.duplex == 1)
+ dropmask |= SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full;
+ else if (options.duplex == 2)
+ dropmask |= SUPPORTED_10baseT_Half | SUPPORTED_100baseT_Half;
+ phydev->supported &= ~dropmask;
+ phydev->advertising = phydev->supported;
+
+ lp->link = 0;
+ lp->speed = 0;
+ lp->duplex = -1;
+ lp->phy_dev = phydev;
+
+ return 0;
+}
+
+static int tc_mii_init(struct net_device *dev)
+{
+ struct tc35815_local *lp = netdev_priv(dev);
+ int err;
+ int i;
+
+ lp->mii_bus.name = "tc35815_mii_bus";
+ lp->mii_bus.read = tc_mdio_read;
+ lp->mii_bus.write = tc_mdio_write;
+ snprintf(lp->mii_bus.id, MII_BUS_ID_SIZE, "%x",
+ (lp->pci_dev->bus->number << 8) | lp->pci_dev->devfn);
+ lp->mii_bus.priv = dev;
+ lp->mii_bus.dev = &lp->pci_dev->dev;
+ lp->mii_bus.irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (!lp->mii_bus.irq) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ lp->mii_bus.irq[i] = PHY_POLL;
+
+ err = mdiobus_register(&lp->mii_bus);
+ if (err)
+ goto err_out_free_mdio_irq;
+ err = tc_mii_probe(dev);
+ if (err)
+ goto err_out_unregister_bus;
+ return 0;
+
+err_out_unregister_bus:
+ mdiobus_unregister(&lp->mii_bus);
+err_out_free_mdio_irq:
+ kfree(lp->mii_bus.irq);
+err_out:
+ return err;
+}
#ifdef CONFIG_CPU_TX49XX
/*
@@ -617,7 +811,7 @@ static int __devinit tc35815_mac_match(struct device *dev, void *data)
static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
struct device *pd = bus_find_device(&platform_bus_type, NULL,
lp->pci_dev, tc35815_mac_match);
if (pd) {
@@ -635,7 +829,7 @@ static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
}
#endif
-static int __devinit tc35815_init_dev_addr (struct net_device *dev)
+static int __devinit tc35815_init_dev_addr(struct net_device *dev)
{
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
@@ -657,21 +851,21 @@ static int __devinit tc35815_init_dev_addr (struct net_device *dev)
return 0;
}
-static int __devinit tc35815_init_one (struct pci_dev *pdev,
- const struct pci_device_id *ent)
+static int __devinit tc35815_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
void __iomem *ioaddr = NULL;
struct net_device *dev;
struct tc35815_local *lp;
int rc;
- unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
+ DECLARE_MAC_BUF(mac);
static int printed_version;
if (!printed_version++) {
printk(version);
dev_printk(KERN_DEBUG, &pdev->dev,
- "speed:%d duplex:%d doforce:%d\n",
- options.speed, options.duplex, options.doforce);
+ "speed:%d duplex:%d\n",
+ options.speed, options.duplex);
}
if (!pdev->irq) {
@@ -680,55 +874,24 @@ static int __devinit tc35815_init_one (struct pci_dev *pdev,
}
/* dev zeroed in alloc_etherdev */
- dev = alloc_etherdev (sizeof (*lp));
+ dev = alloc_etherdev(sizeof(*lp));
if (dev == NULL) {
dev_err(&pdev->dev, "unable to alloc new ethernet\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
- lp = dev->priv;
+ lp = netdev_priv(dev);
lp->dev = dev;
/* enable device (incl. PCI PM wakeup), and bus-mastering */
- rc = pci_enable_device (pdev);
+ rc = pcim_enable_device(pdev);
if (rc)
goto err_out;
-
- mmio_start = pci_resource_start (pdev, 1);
- mmio_end = pci_resource_end (pdev, 1);
- mmio_flags = pci_resource_flags (pdev, 1);
- mmio_len = pci_resource_len (pdev, 1);
-
- /* set this immediately, we need to know before
- * we talk to the chip directly */
-
- /* make sure PCI base addr 1 is MMIO */
- if (!(mmio_flags & IORESOURCE_MEM)) {
- dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
- rc = -ENODEV;
- goto err_out;
- }
-
- /* check for weird/broken PCI region reporting */
- if ((mmio_len < sizeof(struct tc35815_regs))) {
- dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
- rc = -ENODEV;
- goto err_out;
- }
-
- rc = pci_request_regions (pdev, MODNAME);
+ rc = pcim_iomap_regions(pdev, 1 << 1, MODNAME);
if (rc)
goto err_out;
-
- pci_set_master (pdev);
-
- /* ioremap MMIO region */
- ioaddr = ioremap (mmio_start, mmio_len);
- if (ioaddr == NULL) {
- dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
- rc = -EIO;
- goto err_out_free_res;
- }
+ pci_set_master(pdev);
+ ioaddr = pcim_iomap_table(pdev)[1];
/* Initialize the device structure. */
dev->open = tc35815_open;
@@ -748,11 +911,12 @@ static int __devinit tc35815_init_one (struct pci_dev *pdev,
#endif
dev->irq = pdev->irq;
- dev->base_addr = (unsigned long) ioaddr;
+ dev->base_addr = (unsigned long)ioaddr;
+ INIT_WORK(&lp->restart_work, tc35815_restart_work);
spin_lock_init(&lp->lock);
lp->pci_dev = pdev;
- lp->boardtype = ent->driver_data;
+ lp->chiptype = ent->driver_data;
lp->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | NETIF_MSG_LINK;
pci_set_drvdata(pdev, dev);
@@ -766,68 +930,49 @@ static int __devinit tc35815_init_one (struct pci_dev *pdev,
random_ether_addr(dev->dev_addr);
}
- rc = register_netdev (dev);
+ rc = register_netdev(dev);
if (rc)
- goto err_out_unmap;
+ goto err_out;
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- printk(KERN_INFO "%s: %s at 0x%lx, "
- "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
- "IRQ %d\n",
+ printk(KERN_INFO "%s: %s at 0x%lx, %s, IRQ %d\n",
dev->name,
- board_info[ent->driver_data].name,
+ chip_info[ent->driver_data].name,
dev->base_addr,
- dev->dev_addr[0], dev->dev_addr[1],
- dev->dev_addr[2], dev->dev_addr[3],
- dev->dev_addr[4], dev->dev_addr[5],
+ print_mac(mac, dev->dev_addr),
dev->irq);
- setup_timer(&lp->timer, tc35815_timer, (unsigned long) dev);
- lp->mii.dev = dev;
- lp->mii.mdio_read = tc_mdio_read;
- lp->mii.mdio_write = tc_mdio_write;
- lp->mii.phy_id_mask = 0x1f;
- lp->mii.reg_num_mask = 0x1f;
- tc35815_find_phy(dev);
- lp->mii.phy_id = lp->phy_addr;
- lp->mii.full_duplex = 0;
- lp->mii.force_media = 0;
+ rc = tc_mii_init(dev);
+ if (rc)
+ goto err_out_unregister;
return 0;
-err_out_unmap:
- iounmap(ioaddr);
-err_out_free_res:
- pci_release_regions (pdev);
+err_out_unregister:
+ unregister_netdev(dev);
err_out:
- free_netdev (dev);
+ free_netdev(dev);
return rc;
}
-static void __devexit tc35815_remove_one (struct pci_dev *pdev)
+static void __devexit tc35815_remove_one(struct pci_dev *pdev)
{
- struct net_device *dev = pci_get_drvdata (pdev);
- unsigned long mmio_addr;
-
- mmio_addr = dev->base_addr;
-
- unregister_netdev (dev);
-
- if (mmio_addr) {
- iounmap ((void __iomem *)mmio_addr);
- pci_release_regions (pdev);
- }
-
- free_netdev (dev);
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct tc35815_local *lp = netdev_priv(dev);
- pci_set_drvdata (pdev, NULL);
+ phy_disconnect(lp->phy_dev);
+ mdiobus_unregister(&lp->mii_bus);
+ kfree(lp->mii_bus.irq);
+ unregister_netdev(dev);
+ free_netdev(dev);
+ pci_set_drvdata(pdev, NULL);
}
static int
tc35815_init_queues(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
int i;
unsigned long fd_addr;
@@ -838,11 +983,17 @@ tc35815_init_queues(struct net_device *dev)
sizeof(struct TxFD) * TX_FD_NUM >
PAGE_SIZE * FD_PAGE_NUM);
- if ((lp->fd_buf = pci_alloc_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM, &lp->fd_buf_dma)) == 0)
+ lp->fd_buf = pci_alloc_consistent(lp->pci_dev,
+ PAGE_SIZE * FD_PAGE_NUM,
+ &lp->fd_buf_dma);
+ if (!lp->fd_buf)
return -ENOMEM;
for (i = 0; i < RX_BUF_NUM; i++) {
#ifdef TC35815_USE_PACKEDBUFFER
- if ((lp->data_buf[i] = alloc_rxbuf_page(lp->pci_dev, &lp->data_buf_dma[i])) == NULL) {
+ lp->data_buf[i] =
+ alloc_rxbuf_page(lp->pci_dev,
+ &lp->data_buf_dma[i]);
+ if (!lp->data_buf[i]) {
while (--i >= 0) {
free_rxbuf_page(lp->pci_dev,
lp->data_buf[i],
@@ -885,18 +1036,17 @@ tc35815_init_queues(struct net_device *dev)
#endif
printk("\n");
} else {
- for (i = 0; i < FD_PAGE_NUM; i++) {
- clear_page((void *)((unsigned long)lp->fd_buf + i * PAGE_SIZE));
- }
+ for (i = 0; i < FD_PAGE_NUM; i++)
+ clear_page((void *)((unsigned long)lp->fd_buf +
+ i * PAGE_SIZE));
}
fd_addr = (unsigned long)lp->fd_buf;
/* Free Descriptors (for Receive) */
lp->rfd_base = (struct RxFD *)fd_addr;
fd_addr += sizeof(struct RxFD) * RX_FD_NUM;
- for (i = 0; i < RX_FD_NUM; i++) {
+ for (i = 0; i < RX_FD_NUM; i++)
lp->rfd_base[i].fd.FDCtl = cpu_to_le32(FD_CownsFD);
- }
lp->rfd_cur = lp->rfd_base;
lp->rfd_limit = (struct RxFD *)fd_addr - (RX_FD_RESERVE + 1);
@@ -964,7 +1114,7 @@ tc35815_init_queues(struct net_device *dev)
static void
tc35815_clear_queues(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
int i;
for (i = 0; i < TX_FD_NUM; i++) {
@@ -995,7 +1145,7 @@ tc35815_clear_queues(struct net_device *dev)
static void
tc35815_free_queues(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
int i;
if (lp->tfd_base) {
@@ -1076,7 +1226,7 @@ dump_rxfd(struct RxFD *fd)
le32_to_cpu(fd->fd.FDStat),
le32_to_cpu(fd->fd.FDCtl));
if (le32_to_cpu(fd->fd.FDCtl) & FD_CownsFD)
- return 0;
+ return 0;
printk("BD: ");
for (i = 0; i < bd_count; i++)
printk(" %08x %08x",
@@ -1109,7 +1259,7 @@ dump_frfd(struct FrFD *fd)
static void
panic_queues(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
int i;
printk("TxFD base %p, start %u, end %u\n",
@@ -1128,42 +1278,33 @@ panic_queues(struct net_device *dev)
}
#endif
-static void print_eth(char *add)
+static void print_eth(const u8 *add)
{
- int i;
+ DECLARE_MAC_BUF(mac);
- printk("print_eth(%p)\n", add);
- for (i = 0; i < 6; i++)
- printk(" %2.2X", (unsigned char) add[i + 6]);
- printk(" =>");
- for (i = 0; i < 6; i++)
- printk(" %2.2X", (unsigned char) add[i]);
- printk(" : %2.2X%2.2X\n", (unsigned char) add[12], (unsigned char) add[13]);
+ printk(KERN_DEBUG "print_eth(%p)\n", add);
+ printk(KERN_DEBUG " %s =>", print_mac(mac, add + 6));
+ printk(KERN_CONT " %s : %02x%02x\n",
+ print_mac(mac, add), add[12], add[13]);
}
static int tc35815_tx_full(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
return ((lp->tfd_start + 1) % TX_FD_NUM == lp->tfd_end);
}
static void tc35815_restart(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- int do_phy_reset = 1;
- del_timer(&lp->timer); /* Kill if running */
-
- if (lp->mii_id[0] == 0x0016 && (lp->mii_id[1] & 0xfc00) == 0xf800) {
- /* Resetting PHY cause problem on some chip... (SEEQ 80221) */
- do_phy_reset = 0;
- }
- if (do_phy_reset) {
+ struct tc35815_local *lp = netdev_priv(dev);
+
+ if (lp->phy_dev) {
int timeout;
- tc_mdio_write(dev, pid, MII_BMCR, BMCR_RESET);
+
+ phy_write(lp->phy_dev, MII_BMCR, BMCR_RESET);
timeout = 100;
while (--timeout) {
- if (!(tc_mdio_read(dev, pid, MII_BMCR) & BMCR_RESET))
+ if (!(phy_read(lp->phy_dev, MII_BMCR) & BMCR_RESET))
break;
udelay(1);
}
@@ -1171,16 +1312,40 @@ static void tc35815_restart(struct net_device *dev)
printk(KERN_ERR "%s: BMCR reset failed.\n", dev->name);
}
+ spin_lock_irq(&lp->lock);
tc35815_chip_reset(dev);
tc35815_clear_queues(dev);
tc35815_chip_init(dev);
/* Reconfigure CAM again since tc35815_chip_init() initialize it. */
tc35815_set_multicast_list(dev);
+ spin_unlock_irq(&lp->lock);
+
+ netif_wake_queue(dev);
+}
+
+static void tc35815_restart_work(struct work_struct *work)
+{
+ struct tc35815_local *lp =
+ container_of(work, struct tc35815_local, restart_work);
+ struct net_device *dev = lp->dev;
+
+ tc35815_restart(dev);
+}
+
+static void tc35815_schedule_restart(struct net_device *dev)
+{
+ struct tc35815_local *lp = netdev_priv(dev);
+ struct tc35815_regs __iomem *tr =
+ (struct tc35815_regs __iomem *)dev->base_addr;
+
+ /* disable interrupts */
+ tc_writel(0, &tr->Int_En);
+ tc_writel(tc_readl(&tr->DMA_Ctl) | DMA_IntMask, &tr->DMA_Ctl);
+ schedule_work(&lp->restart_work);
}
static void tc35815_tx_timeout(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
@@ -1188,28 +1353,12 @@ static void tc35815_tx_timeout(struct net_device *dev)
dev->name, tc_readl(&tr->Tx_Stat));
/* Try to restart the adaptor. */
- spin_lock_irq(&lp->lock);
- tc35815_restart(dev);
- spin_unlock_irq(&lp->lock);
-
- lp->stats.tx_errors++;
-
- /* If we have space available to accept new transmit
- * requests, wake up the queueing layer. This would
- * be the case if the chipset_init() call above just
- * flushes out the tx queue and empties it.
- *
- * If instead, the tx queue is retained then the
- * netif_wake_queue() call should be placed in the
- * TX completion interrupt handler of the driver instead
- * of here.
- */
- if (!tc35815_tx_full(dev))
- netif_wake_queue(dev);
+ tc35815_schedule_restart(dev);
+ dev->stats.tx_errors++;
}
/*
- * Open/initialize the board. This is called (in the current kernel)
+ * Open/initialize the controller. This is called (in the current kernel)
* sometime after booting when the 'ifconfig' program is run.
*
* This routine should set everything up anew at each open, even
@@ -1219,17 +1368,16 @@ static void tc35815_tx_timeout(struct net_device *dev)
static int
tc35815_open(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
/*
* This is used if the interrupt line can turned off (shared).
* See 3c503.c for an example of selecting the IRQ at config-time.
*/
- if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED, dev->name, dev)) {
+ if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED,
+ dev->name, dev))
return -EAGAIN;
- }
- del_timer(&lp->timer); /* Kill if running */
tc35815_chip_reset(dev);
if (tc35815_init_queues(dev) != 0) {
@@ -1246,6 +1394,9 @@ tc35815_open(struct net_device *dev)
tc35815_chip_init(dev);
spin_unlock_irq(&lp->lock);
+ /* schedule a link state check */
+ phy_start(lp->phy_dev);
+
/* We are now ready to accept transmit requeusts from
* the queueing layer of the networking.
*/
@@ -1261,7 +1412,7 @@ tc35815_open(struct net_device *dev)
*/
static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
struct TxFD *txfd;
unsigned long flags;
@@ -1366,7 +1517,7 @@ static void tc35815_fatal_error_interrupt(struct net_device *dev, u32 status)
panic("%s: Too many fatal errors.", dev->name);
printk(KERN_WARNING "%s: Resetting ...\n", dev->name);
/* Try to restart the adaptor. */
- tc35815_restart(dev);
+ tc35815_schedule_restart(dev);
}
#ifdef TC35815_NAPI
@@ -1375,7 +1526,7 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
static int tc35815_do_interrupt(struct net_device *dev, u32 status)
#endif
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
int ret = -1;
@@ -1392,7 +1543,7 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status)
printk(KERN_WARNING
"%s: Free Descriptor Area Exhausted (%#x).\n",
dev->name, status);
- lp->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
ret = 0;
}
if (status & Int_IntBLEx) {
@@ -1401,14 +1552,14 @@ static int tc35815_do_interrupt(struct net_device *dev, u32 status)
printk(KERN_WARNING
"%s: Buffer List Exhausted (%#x).\n",
dev->name, status);
- lp->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
ret = 0;
}
if (status & Int_IntExBD) {
printk(KERN_WARNING
"%s: Excessive Buffer Descriptiors (%#x).\n",
dev->name, status);
- lp->stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
ret = 0;
}
@@ -1492,7 +1643,7 @@ static void
tc35815_rx(struct net_device *dev)
#endif
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
unsigned int fdctl;
int i;
int buf_free_count = 0;
@@ -1532,7 +1683,7 @@ tc35815_rx(struct net_device *dev)
if (skb == NULL) {
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
dev->name);
- lp->stats.rx_dropped++;
+ dev->stats.rx_dropped++;
break;
}
skb_reserve(skb, 2); /* 16 bit alignment */
@@ -1602,10 +1753,10 @@ tc35815_rx(struct net_device *dev)
netif_rx(skb);
#endif
dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
} else {
- lp->stats.rx_errors++;
+ dev->stats.rx_errors++;
printk(KERN_DEBUG "%s: Rx error (status %x)\n",
dev->name, status & Rx_Stat_Mask);
/* WORKAROUND: LongErr and CRCErr means Overflow. */
@@ -1613,10 +1764,14 @@ tc35815_rx(struct net_device *dev)
status &= ~(Rx_LongErr|Rx_CRCErr);
status |= Rx_Over;
}
- if (status & Rx_LongErr) lp->stats.rx_length_errors++;
- if (status & Rx_Over) lp->stats.rx_fifo_errors++;
- if (status & Rx_CRCErr) lp->stats.rx_crc_errors++;
- if (status & Rx_Align) lp->stats.rx_frame_errors++;
+ if (status & Rx_LongErr)
+ dev->stats.rx_length_errors++;
+ if (status & Rx_Over)
+ dev->stats.rx_fifo_errors++;
+ if (status & Rx_CRCErr)
+ dev->stats.rx_crc_errors++;
+ if (status & Rx_Align)
+ dev->stats.rx_frame_errors++;
}
if (bd_count > 0) {
@@ -1772,40 +1927,39 @@ static int tc35815_poll(struct napi_struct *napi, int budget)
static void
tc35815_check_tx_stat(struct net_device *dev, int status)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
const char *msg = NULL;
/* count collisions */
if (status & Tx_ExColl)
- lp->stats.collisions += 16;
+ dev->stats.collisions += 16;
if (status & Tx_TxColl_MASK)
- lp->stats.collisions += status & Tx_TxColl_MASK;
+ dev->stats.collisions += status & Tx_TxColl_MASK;
#ifndef NO_CHECK_CARRIER
/* TX4939 does not have NCarr */
- if (lp->boardtype == TC35815_TX4939)
+ if (lp->chiptype == TC35815_TX4939)
status &= ~Tx_NCarr;
#ifdef WORKAROUND_LOSTCAR
/* WORKAROUND: ignore LostCrS in full duplex operation */
- if ((lp->timer_state != asleep && lp->timer_state != lcheck)
- || lp->fullduplex)
+ if (!lp->link || lp->duplex == DUPLEX_FULL)
status &= ~Tx_NCarr;
#endif
#endif
if (!(status & TX_STA_ERR)) {
/* no error. */
- lp->stats.tx_packets++;
+ dev->stats.tx_packets++;
return;
}
- lp->stats.tx_errors++;
+ dev->stats.tx_errors++;
if (status & Tx_ExColl) {
- lp->stats.tx_aborted_errors++;
+ dev->stats.tx_aborted_errors++;
msg = "Excessive Collision.";
}
if (status & Tx_Under) {
- lp->stats.tx_fifo_errors++;
+ dev->stats.tx_fifo_errors++;
msg = "Tx FIFO Underrun.";
if (lp->lstats.tx_underrun < TX_THRESHOLD_KEEP_LIMIT) {
lp->lstats.tx_underrun++;
@@ -1818,25 +1972,25 @@ tc35815_check_tx_stat(struct net_device *dev, int status)
}
}
if (status & Tx_Defer) {
- lp->stats.tx_fifo_errors++;
+ dev->stats.tx_fifo_errors++;
msg = "Excessive Deferral.";
}
#ifndef NO_CHECK_CARRIER
if (status & Tx_NCarr) {
- lp->stats.tx_carrier_errors++;
+ dev->stats.tx_carrier_errors++;
msg = "Lost Carrier Sense.";
}
#endif
if (status & Tx_LateColl) {
- lp->stats.tx_aborted_errors++;
+ dev->stats.tx_aborted_errors++;
msg = "Late Collision.";
}
if (status & Tx_TxPar) {
- lp->stats.tx_fifo_errors++;
+ dev->stats.tx_fifo_errors++;
msg = "Transmit Parity Error.";
}
if (status & Tx_SQErr) {
- lp->stats.tx_heartbeat_errors++;
+ dev->stats.tx_heartbeat_errors++;
msg = "Signal Quality Error.";
}
if (msg && netif_msg_tx_err(lp))
@@ -1849,7 +2003,7 @@ tc35815_check_tx_stat(struct net_device *dev, int status)
static void
tc35815_txdone(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
struct TxFD *txfd;
unsigned int fdctl;
@@ -1878,7 +2032,7 @@ tc35815_txdone(struct net_device *dev)
BUG_ON(lp->tx_skbs[lp->tfd_end].skb != skb);
#endif
if (skb) {
- lp->stats.tx_bytes += skb->len;
+ dev->stats.tx_bytes += skb->len;
pci_unmap_single(lp->pci_dev, lp->tx_skbs[lp->tfd_end].skb_dma, skb->len, PCI_DMA_TODEVICE);
lp->tx_skbs[lp->tfd_end].skb = NULL;
lp->tx_skbs[lp->tfd_end].skb_dma = 0;
@@ -1904,7 +2058,7 @@ tc35815_txdone(struct net_device *dev)
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
int head = (lp->tfd_start + TX_FD_NUM - 1) % TX_FD_NUM;
- struct TxFD* txhead = &lp->tfd_base[head];
+ struct TxFD *txhead = &lp->tfd_base[head];
int qlen = (lp->tfd_start + TX_FD_NUM
- lp->tfd_end) % TX_FD_NUM;
@@ -1939,7 +2093,7 @@ tc35815_txdone(struct net_device *dev)
* condition, and space has now been made available,
* wake up the queue.
*/
- if (netif_queue_stopped(dev) && ! tc35815_tx_full(dev))
+ if (netif_queue_stopped(dev) && !tc35815_tx_full(dev))
netif_wake_queue(dev);
}
@@ -1947,16 +2101,17 @@ tc35815_txdone(struct net_device *dev)
static int
tc35815_close(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
netif_stop_queue(dev);
#ifdef TC35815_NAPI
napi_disable(&lp->napi);
#endif
+ if (lp->phy_dev)
+ phy_stop(lp->phy_dev);
+ cancel_work_sync(&lp->restart_work);
/* Flush the Tx and disable Rx here. */
-
- del_timer(&lp->timer); /* Kill if running */
tc35815_chip_reset(dev);
free_irq(dev->irq, dev);
@@ -1972,34 +2127,30 @@ tc35815_close(struct net_device *dev)
*/
static struct net_device_stats *tc35815_get_stats(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
- if (netif_running(dev)) {
+ if (netif_running(dev))
/* Update the statistics from the device registers. */
- lp->stats.rx_missed_errors = tc_readl(&tr->Miss_Cnt);
- }
+ dev->stats.rx_missed_errors = tc_readl(&tr->Miss_Cnt);
- return &lp->stats;
+ return &dev->stats;
}
static void tc35815_set_cam_entry(struct net_device *dev, int index, unsigned char *addr)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
int cam_index = index * 6;
u32 cam_data;
u32 saved_addr;
+ DECLARE_MAC_BUF(mac);
+
saved_addr = tc_readl(&tr->CAM_Adr);
- if (netif_msg_hw(lp)) {
- int i;
- printk(KERN_DEBUG "%s: CAM %d:", dev->name, index);
- for (i = 0; i < 6; i++)
- printk(" %02x", addr[i]);
- printk("\n");
- }
+ if (netif_msg_hw(lp))
+ printk(KERN_DEBUG "%s: CAM %d: %s\n",
+ dev->name, index, print_mac(mac, addr));
if (index & 1) {
/* read modify write */
tc_writel(cam_index - 2, &tr->CAM_Adr);
@@ -2039,28 +2190,24 @@ tc35815_set_multicast_list(struct net_device *dev)
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
- if (dev->flags&IFF_PROMISC)
- {
+ if (dev->flags & IFF_PROMISC) {
#ifdef WORKAROUND_100HALF_PROMISC
/* With some (all?) 100MHalf HUB, controller will hang
* if we enabled promiscuous mode before linkup... */
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- if (!(tc_mdio_read(dev, pid, MII_BMSR) & BMSR_LSTATUS))
+ struct tc35815_local *lp = netdev_priv(dev);
+
+ if (!lp->link)
return;
#endif
/* Enable promiscuous mode */
tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
- }
- else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > CAM_ENTRY_MAX - 3)
- {
+ } else if ((dev->flags & IFF_ALLMULTI) ||
+ dev->mc_count > CAM_ENTRY_MAX - 3) {
/* CAM 0, 1, 20 are reserved. */
/* Disable promiscuous mode, use normal mode. */
tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl);
- }
- else if(dev->mc_count)
- {
- struct dev_mc_list* cur_addr = dev->mc_list;
+ } else if (dev->mc_count) {
+ struct dev_mc_list *cur_addr = dev->mc_list;
int i;
int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE);
@@ -2075,8 +2222,7 @@ tc35815_set_multicast_list(struct net_device *dev)
}
tc_writel(ena_bits, &tr->CAM_Ena);
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
- }
- else {
+ } else {
tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena);
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
}
@@ -2084,7 +2230,7 @@ tc35815_set_multicast_list(struct net_device *dev)
static void tc35815_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
strcpy(info->driver, MODNAME);
strcpy(info->version, DRV_VERSION);
strcpy(info->bus_info, pci_name(lp->pci_dev));
@@ -2092,78 +2238,37 @@ static void tc35815_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *
static int tc35815_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct tc35815_local *lp = dev->priv;
- spin_lock_irq(&lp->lock);
- mii_ethtool_gset(&lp->mii, cmd);
- spin_unlock_irq(&lp->lock);
- return 0;
-}
-
-static int tc35815_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct tc35815_local *lp = dev->priv;
- int rc;
-#if 1 /* use our negotiation method... */
- /* Verify the settings we care about. */
- if (cmd->autoneg != AUTONEG_ENABLE &&
- cmd->autoneg != AUTONEG_DISABLE)
- return -EINVAL;
- if (cmd->autoneg == AUTONEG_DISABLE &&
- ((cmd->speed != SPEED_100 &&
- cmd->speed != SPEED_10) ||
- (cmd->duplex != DUPLEX_HALF &&
- cmd->duplex != DUPLEX_FULL)))
- return -EINVAL;
+ struct tc35815_local *lp = netdev_priv(dev);
- /* Ok, do it to it. */
- spin_lock_irq(&lp->lock);
- del_timer(&lp->timer);
- tc35815_start_auto_negotiation(dev, cmd);
- spin_unlock_irq(&lp->lock);
- rc = 0;
-#else
- spin_lock_irq(&lp->lock);
- rc = mii_ethtool_sset(&lp->mii, cmd);
- spin_unlock_irq(&lp->lock);
-#endif
- return rc;
+ if (!lp->phy_dev)
+ return -ENODEV;
+ return phy_ethtool_gset(lp->phy_dev, cmd);
}
-static int tc35815_nway_reset(struct net_device *dev)
+static int tc35815_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct tc35815_local *lp = dev->priv;
- int rc;
- spin_lock_irq(&lp->lock);
- rc = mii_nway_restart(&lp->mii);
- spin_unlock_irq(&lp->lock);
- return rc;
-}
+ struct tc35815_local *lp = netdev_priv(dev);
-static u32 tc35815_get_link(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- int rc;
- spin_lock_irq(&lp->lock);
- rc = mii_link_ok(&lp->mii);
- spin_unlock_irq(&lp->lock);
- return rc;
+ if (!lp->phy_dev)
+ return -ENODEV;
+ return phy_ethtool_sset(lp->phy_dev, cmd);
}
static u32 tc35815_get_msglevel(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
return lp->msg_enable;
}
static void tc35815_set_msglevel(struct net_device *dev, u32 datum)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
lp->msg_enable = datum;
}
static int tc35815_get_sset_count(struct net_device *dev, int sset)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
switch (sset) {
case ETH_SS_STATS:
@@ -2175,7 +2280,7 @@ static int tc35815_get_sset_count(struct net_device *dev, int sset)
static void tc35815_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
data[0] = lp->lstats.max_tx_qlen;
data[1] = lp->lstats.tx_ints;
data[2] = lp->lstats.rx_ints;
@@ -2200,8 +2305,7 @@ static const struct ethtool_ops tc35815_ethtool_ops = {
.get_drvinfo = tc35815_get_drvinfo,
.get_settings = tc35815_get_settings,
.set_settings = tc35815_set_settings,
- .nway_reset = tc35815_nway_reset,
- .get_link = tc35815_get_link,
+ .get_link = ethtool_op_get_link,
.get_msglevel = tc35815_get_msglevel,
.set_msglevel = tc35815_set_msglevel,
.get_strings = tc35815_get_strings,
@@ -2211,611 +2315,13 @@ static const struct ethtool_ops tc35815_ethtool_ops = {
static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- struct tc35815_local *lp = dev->priv;
- int rc;
+ struct tc35815_local *lp = netdev_priv(dev);
if (!netif_running(dev))
return -EINVAL;
-
- spin_lock_irq(&lp->lock);
- rc = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
- spin_unlock_irq(&lp->lock);
-
- return rc;
-}
-
-static int tc_mdio_read(struct net_device *dev, int phy_id, int location)
-{
- struct tc35815_regs __iomem *tr =
- (struct tc35815_regs __iomem *)dev->base_addr;
- u32 data;
- tc_writel(MD_CA_Busy | (phy_id << 5) | location, &tr->MD_CA);
- while (tc_readl(&tr->MD_CA) & MD_CA_Busy)
- ;
- data = tc_readl(&tr->MD_Data);
- return data & 0xffff;
-}
-
-static void tc_mdio_write(struct net_device *dev, int phy_id, int location,
- int val)
-{
- struct tc35815_regs __iomem *tr =
- (struct tc35815_regs __iomem *)dev->base_addr;
- tc_writel(val, &tr->MD_Data);
- tc_writel(MD_CA_Busy | MD_CA_Wr | (phy_id << 5) | location, &tr->MD_CA);
- while (tc_readl(&tr->MD_CA) & MD_CA_Busy)
- ;
-}
-
-/* Auto negotiation. The scheme is very simple. We have a timer routine
- * that keeps watching the auto negotiation process as it progresses.
- * The DP83840 is first told to start doing it's thing, we set up the time
- * and place the timer state machine in it's initial state.
- *
- * Here the timer peeks at the DP83840 status registers at each click to see
- * if the auto negotiation has completed, we assume here that the DP83840 PHY
- * will time out at some point and just tell us what (didn't) happen. For
- * complete coverage we only allow so many of the ticks at this level to run,
- * when this has expired we print a warning message and try another strategy.
- * This "other" strategy is to force the interface into various speed/duplex
- * configurations and we stop when we see a link-up condition before the
- * maximum number of "peek" ticks have occurred.
- *
- * Once a valid link status has been detected we configure the BigMAC and
- * the rest of the Happy Meal to speak the most efficient protocol we could
- * get a clean link for. The priority for link configurations, highest first
- * is:
- * 100 Base-T Full Duplex
- * 100 Base-T Half Duplex
- * 10 Base-T Full Duplex
- * 10 Base-T Half Duplex
- *
- * We start a new timer now, after a successful auto negotiation status has
- * been detected. This timer just waits for the link-up bit to get set in
- * the BMCR of the DP83840. When this occurs we print a kernel log message
- * describing the link type in use and the fact that it is up.
- *
- * If a fatal error of some sort is signalled and detected in the interrupt
- * service routine, and the chip is reset, or the link is ifconfig'd down
- * and then back up, this entire process repeats itself all over again.
- */
-/* Note: Above comments are come from sunhme driver. */
-
-static int tc35815_try_next_permutation(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short bmcr;
-
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
-
- /* Downgrade from full to half duplex. Only possible via ethtool. */
- if (bmcr & BMCR_FULLDPLX) {
- bmcr &= ~BMCR_FULLDPLX;
- printk(KERN_DEBUG "%s: try next permutation (BMCR %x)\n", dev->name, bmcr);
- tc_mdio_write(dev, pid, MII_BMCR, bmcr);
- return 0;
- }
-
- /* Downgrade from 100 to 10. */
- if (bmcr & BMCR_SPEED100) {
- bmcr &= ~BMCR_SPEED100;
- printk(KERN_DEBUG "%s: try next permutation (BMCR %x)\n", dev->name, bmcr);
- tc_mdio_write(dev, pid, MII_BMCR, bmcr);
- return 0;
- }
-
- /* We've tried everything. */
- return -1;
-}
-
-static void
-tc35815_display_link_mode(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short lpa, bmcr;
- char *speed = "", *duplex = "";
-
- lpa = tc_mdio_read(dev, pid, MII_LPA);
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- if (options.speed ? (bmcr & BMCR_SPEED100) : (lpa & (LPA_100HALF | LPA_100FULL)))
- speed = "100Mb/s";
- else
- speed = "10Mb/s";
- if (options.duplex ? (bmcr & BMCR_FULLDPLX) : (lpa & (LPA_100FULL | LPA_10FULL)))
- duplex = "Full Duplex";
- else
- duplex = "Half Duplex";
-
- if (netif_msg_link(lp))
- printk(KERN_INFO "%s: Link is up at %s, %s.\n",
- dev->name, speed, duplex);
- printk(KERN_DEBUG "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
- dev->name,
- bmcr, tc_mdio_read(dev, pid, MII_BMSR), lpa);
-}
-
-static void tc35815_display_forced_link_mode(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short bmcr;
- char *speed = "", *duplex = "";
-
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- if (bmcr & BMCR_SPEED100)
- speed = "100Mb/s";
- else
- speed = "10Mb/s";
- if (bmcr & BMCR_FULLDPLX)
- duplex = "Full Duplex.\n";
- else
- duplex = "Half Duplex.\n";
-
- if (netif_msg_link(lp))
- printk(KERN_INFO "%s: Link has been forced up at %s, %s",
- dev->name, speed, duplex);
-}
-
-static void tc35815_set_link_modes(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- struct tc35815_regs __iomem *tr =
- (struct tc35815_regs __iomem *)dev->base_addr;
- int pid = lp->phy_addr;
- unsigned short bmcr, lpa;
- int speed;
-
- if (lp->timer_state == arbwait) {
- lpa = tc_mdio_read(dev, pid, MII_LPA);
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- printk(KERN_DEBUG "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
- dev->name,
- bmcr, tc_mdio_read(dev, pid, MII_BMSR), lpa);
- if (!(lpa & (LPA_10HALF | LPA_10FULL |
- LPA_100HALF | LPA_100FULL))) {
- /* fall back to 10HALF */
- printk(KERN_INFO "%s: bad ability %04x - falling back to 10HD.\n",
- dev->name, lpa);
- lpa = LPA_10HALF;
- }
- if (options.duplex ? (bmcr & BMCR_FULLDPLX) : (lpa & (LPA_100FULL | LPA_10FULL)))
- lp->fullduplex = 1;
- else
- lp->fullduplex = 0;
- if (options.speed ? (bmcr & BMCR_SPEED100) : (lpa & (LPA_100HALF | LPA_100FULL)))
- speed = 100;
- else
- speed = 10;
- } else {
- /* Forcing a link mode. */
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- if (bmcr & BMCR_FULLDPLX)
- lp->fullduplex = 1;
- else
- lp->fullduplex = 0;
- if (bmcr & BMCR_SPEED100)
- speed = 100;
- else
- speed = 10;
- }
-
- tc_writel(tc_readl(&tr->MAC_Ctl) | MAC_HaltReq, &tr->MAC_Ctl);
- if (lp->fullduplex) {
- tc_writel(tc_readl(&tr->MAC_Ctl) | MAC_FullDup, &tr->MAC_Ctl);
- } else {
- tc_writel(tc_readl(&tr->MAC_Ctl) & ~MAC_FullDup, &tr->MAC_Ctl);
- }
- tc_writel(tc_readl(&tr->MAC_Ctl) & ~MAC_HaltReq, &tr->MAC_Ctl);
-
- /* TX4939 PCFG.SPEEDn bit will be changed on NETDEV_CHANGE event. */
-
-#ifndef NO_CHECK_CARRIER
- /* TX4939 does not have EnLCarr */
- if (lp->boardtype != TC35815_TX4939) {
-#ifdef WORKAROUND_LOSTCAR
- /* WORKAROUND: enable LostCrS only if half duplex operation */
- if (!lp->fullduplex && lp->boardtype != TC35815_TX4939)
- tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr, &tr->Tx_Ctl);
-#endif
- }
-#endif
- lp->mii.full_duplex = lp->fullduplex;
-}
-
-static void tc35815_timer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short bmsr, bmcr, lpa;
- int restart_timer = 0;
-
- spin_lock_irq(&lp->lock);
-
- lp->timer_ticks++;
- switch (lp->timer_state) {
- case arbwait:
- /*
- * Only allow for 5 ticks, thats 10 seconds and much too
- * long to wait for arbitration to complete.
- */
- /* TC35815 need more times... */
- if (lp->timer_ticks >= 10) {
- /* Enter force mode. */
- if (!options.doforce) {
- printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful,"
- " cable probblem?\n", dev->name);
- /* Try to restart the adaptor. */
- tc35815_restart(dev);
- goto out;
- }
- printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful,"
- " trying force link mode\n", dev->name);
- printk(KERN_DEBUG "%s: BMCR %x BMSR %x\n", dev->name,
- tc_mdio_read(dev, pid, MII_BMCR),
- tc_mdio_read(dev, pid, MII_BMSR));
- bmcr = BMCR_SPEED100;
- tc_mdio_write(dev, pid, MII_BMCR, bmcr);
-
- /*
- * OK, seems we need do disable the transceiver
- * for the first tick to make sure we get an
- * accurate link state at the second tick.
- */
-
- lp->timer_state = ltrywait;
- lp->timer_ticks = 0;
- restart_timer = 1;
- } else {
- /* Anything interesting happen? */
- bmsr = tc_mdio_read(dev, pid, MII_BMSR);
- if (bmsr & BMSR_ANEGCOMPLETE) {
- /* Just what we've been waiting for... */
- tc35815_set_link_modes(dev);
-
- /*
- * Success, at least so far, advance our state
- * engine.
- */
- lp->timer_state = lupwait;
- restart_timer = 1;
- } else {
- restart_timer = 1;
- }
- }
- break;
-
- case lupwait:
- /*
- * Auto negotiation was successful and we are awaiting a
- * link up status. I have decided to let this timer run
- * forever until some sort of error is signalled, reporting
- * a message to the user at 10 second intervals.
- */
- bmsr = tc_mdio_read(dev, pid, MII_BMSR);
- if (bmsr & BMSR_LSTATUS) {
- /*
- * Wheee, it's up, display the link mode in use and put
- * the timer to sleep.
- */
- tc35815_display_link_mode(dev);
- netif_carrier_on(dev);
-#ifdef WORKAROUND_100HALF_PROMISC
- /* delayed promiscuous enabling */
- if (dev->flags & IFF_PROMISC)
- tc35815_set_multicast_list(dev);
-#endif
-#if 1
- lp->saved_lpa = tc_mdio_read(dev, pid, MII_LPA);
- lp->timer_state = lcheck;
- restart_timer = 1;
-#else
- lp->timer_state = asleep;
- restart_timer = 0;
-#endif
- } else {
- if (lp->timer_ticks >= 10) {
- printk(KERN_NOTICE "%s: Auto negotiation successful, link still "
- "not completely up.\n", dev->name);
- lp->timer_ticks = 0;
- restart_timer = 1;
- } else {
- restart_timer = 1;
- }
- }
- break;
-
- case ltrywait:
- /*
- * Making the timeout here too long can make it take
- * annoyingly long to attempt all of the link mode
- * permutations, but then again this is essentially
- * error recovery code for the most part.
- */
- bmsr = tc_mdio_read(dev, pid, MII_BMSR);
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- if (lp->timer_ticks == 1) {
- /*
- * Re-enable transceiver, we'll re-enable the
- * transceiver next tick, then check link state
- * on the following tick.
- */
- restart_timer = 1;
- break;
- }
- if (lp->timer_ticks == 2) {
- restart_timer = 1;
- break;
- }
- if (bmsr & BMSR_LSTATUS) {
- /* Force mode selection success. */
- tc35815_display_forced_link_mode(dev);
- netif_carrier_on(dev);
- tc35815_set_link_modes(dev);
-#ifdef WORKAROUND_100HALF_PROMISC
- /* delayed promiscuous enabling */
- if (dev->flags & IFF_PROMISC)
- tc35815_set_multicast_list(dev);
-#endif
-#if 1
- lp->saved_lpa = tc_mdio_read(dev, pid, MII_LPA);
- lp->timer_state = lcheck;
- restart_timer = 1;
-#else
- lp->timer_state = asleep;
- restart_timer = 0;
-#endif
- } else {
- if (lp->timer_ticks >= 4) { /* 6 seconds or so... */
- int ret;
-
- ret = tc35815_try_next_permutation(dev);
- if (ret == -1) {
- /*
- * Aieee, tried them all, reset the
- * chip and try all over again.
- */
- printk(KERN_NOTICE "%s: Link down, "
- "cable problem?\n",
- dev->name);
-
- /* Try to restart the adaptor. */
- tc35815_restart(dev);
- goto out;
- }
- lp->timer_ticks = 0;
- restart_timer = 1;
- } else {
- restart_timer = 1;
- }
- }
- break;
-
- case lcheck:
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- lpa = tc_mdio_read(dev, pid, MII_LPA);
- if (bmcr & (BMCR_PDOWN | BMCR_ISOLATE | BMCR_RESET)) {
- printk(KERN_ERR "%s: PHY down? (BMCR %x)\n", dev->name,
- bmcr);
- } else if ((lp->saved_lpa ^ lpa) &
- (LPA_100FULL|LPA_100HALF|LPA_10FULL|LPA_10HALF)) {
- printk(KERN_NOTICE "%s: link status changed"
- " (BMCR %x LPA %x->%x)\n", dev->name,
- bmcr, lp->saved_lpa, lpa);
- } else {
- /* go on */
- restart_timer = 1;
- break;
- }
- /* Try to restart the adaptor. */
- tc35815_restart(dev);
- goto out;
-
- case asleep:
- default:
- /* Can't happens.... */
- printk(KERN_ERR "%s: Aieee, link timer is asleep but we got "
- "one anyways!\n", dev->name);
- restart_timer = 0;
- lp->timer_ticks = 0;
- lp->timer_state = asleep; /* foo on you */
- break;
- }
-
- if (restart_timer) {
- lp->timer.expires = jiffies + msecs_to_jiffies(1200);
- add_timer(&lp->timer);
- }
-out:
- spin_unlock_irq(&lp->lock);
-}
-
-static void tc35815_start_auto_negotiation(struct net_device *dev,
- struct ethtool_cmd *ep)
-{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short bmsr, bmcr, advertize;
- int timeout;
-
- netif_carrier_off(dev);
- bmsr = tc_mdio_read(dev, pid, MII_BMSR);
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- advertize = tc_mdio_read(dev, pid, MII_ADVERTISE);
-
- if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) {
- if (options.speed || options.duplex) {
- /* Advertise only specified configuration. */
- advertize &= ~(ADVERTISE_10HALF |
- ADVERTISE_10FULL |
- ADVERTISE_100HALF |
- ADVERTISE_100FULL);
- if (options.speed != 10) {
- if (options.duplex != 1)
- advertize |= ADVERTISE_100FULL;
- if (options.duplex != 2)
- advertize |= ADVERTISE_100HALF;
- }
- if (options.speed != 100) {
- if (options.duplex != 1)
- advertize |= ADVERTISE_10FULL;
- if (options.duplex != 2)
- advertize |= ADVERTISE_10HALF;
- }
- if (options.speed == 100)
- bmcr |= BMCR_SPEED100;
- else if (options.speed == 10)
- bmcr &= ~BMCR_SPEED100;
- if (options.duplex == 2)
- bmcr |= BMCR_FULLDPLX;
- else if (options.duplex == 1)
- bmcr &= ~BMCR_FULLDPLX;
- } else {
- /* Advertise everything we can support. */
- if (bmsr & BMSR_10HALF)
- advertize |= ADVERTISE_10HALF;
- else
- advertize &= ~ADVERTISE_10HALF;
- if (bmsr & BMSR_10FULL)
- advertize |= ADVERTISE_10FULL;
- else
- advertize &= ~ADVERTISE_10FULL;
- if (bmsr & BMSR_100HALF)
- advertize |= ADVERTISE_100HALF;
- else
- advertize &= ~ADVERTISE_100HALF;
- if (bmsr & BMSR_100FULL)
- advertize |= ADVERTISE_100FULL;
- else
- advertize &= ~ADVERTISE_100FULL;
- }
-
- tc_mdio_write(dev, pid, MII_ADVERTISE, advertize);
-
- /* Enable Auto-Negotiation, this is usually on already... */
- bmcr |= BMCR_ANENABLE;
- tc_mdio_write(dev, pid, MII_BMCR, bmcr);
-
- /* Restart it to make sure it is going. */
- bmcr |= BMCR_ANRESTART;
- tc_mdio_write(dev, pid, MII_BMCR, bmcr);
- printk(KERN_DEBUG "%s: ADVERTISE %x BMCR %x\n", dev->name, advertize, bmcr);
-
- /* BMCR_ANRESTART self clears when the process has begun. */
- timeout = 64; /* More than enough. */
- while (--timeout) {
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- if (!(bmcr & BMCR_ANRESTART))
- break; /* got it. */
- udelay(10);
- }
- if (!timeout) {
- printk(KERN_ERR "%s: TC35815 would not start auto "
- "negotiation BMCR=0x%04x\n",
- dev->name, bmcr);
- printk(KERN_NOTICE "%s: Performing force link "
- "detection.\n", dev->name);
- goto force_link;
- } else {
- printk(KERN_DEBUG "%s: auto negotiation started.\n", dev->name);
- lp->timer_state = arbwait;
- }
- } else {
-force_link:
- /* Force the link up, trying first a particular mode.
- * Either we are here at the request of ethtool or
- * because the Happy Meal would not start to autoneg.
- */
-
- /* Disable auto-negotiation in BMCR, enable the duplex and
- * speed setting, init the timer state machine, and fire it off.
- */
- if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) {
- bmcr = BMCR_SPEED100;
- } else {
- if (ep->speed == SPEED_100)
- bmcr = BMCR_SPEED100;
- else
- bmcr = 0;
- if (ep->duplex == DUPLEX_FULL)
- bmcr |= BMCR_FULLDPLX;
- }
- tc_mdio_write(dev, pid, MII_BMCR, bmcr);
-
- /* OK, seems we need do disable the transceiver for the first
- * tick to make sure we get an accurate link state at the
- * second tick.
- */
- lp->timer_state = ltrywait;
- }
-
- del_timer(&lp->timer);
- lp->timer_ticks = 0;
- lp->timer.expires = jiffies + msecs_to_jiffies(1200);
- add_timer(&lp->timer);
-}
-
-static void tc35815_find_phy(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short id0;
-
- /* find MII phy */
- for (pid = 31; pid >= 0; pid--) {
- id0 = tc_mdio_read(dev, pid, MII_BMSR);
- if (id0 != 0xffff && id0 != 0x0000 &&
- (id0 & BMSR_RESV) != (0xffff & BMSR_RESV) /* paranoia? */
- ) {
- lp->phy_addr = pid;
- break;
- }
- }
- if (pid < 0) {
- printk(KERN_ERR "%s: No MII Phy found.\n",
- dev->name);
- lp->phy_addr = pid = 0;
- }
-
- lp->mii_id[0] = tc_mdio_read(dev, pid, MII_PHYSID1);
- lp->mii_id[1] = tc_mdio_read(dev, pid, MII_PHYSID2);
- if (netif_msg_hw(lp))
- printk(KERN_INFO "%s: PHY(%02x) ID %04x %04x\n", dev->name,
- pid, lp->mii_id[0], lp->mii_id[1]);
-}
-
-static void tc35815_phy_chip_init(struct net_device *dev)
-{
- struct tc35815_local *lp = dev->priv;
- int pid = lp->phy_addr;
- unsigned short bmcr;
- struct ethtool_cmd ecmd, *ep;
-
- /* dis-isolate if needed. */
- bmcr = tc_mdio_read(dev, pid, MII_BMCR);
- if (bmcr & BMCR_ISOLATE) {
- int count = 32;
- printk(KERN_DEBUG "%s: unisolating...", dev->name);
- tc_mdio_write(dev, pid, MII_BMCR, bmcr & ~BMCR_ISOLATE);
- while (--count) {
- if (!(tc_mdio_read(dev, pid, MII_BMCR) & BMCR_ISOLATE))
- break;
- udelay(20);
- }
- printk(" %s.\n", count ? "done" : "failed");
- }
-
- if (options.speed && options.duplex) {
- ecmd.autoneg = AUTONEG_DISABLE;
- ecmd.speed = options.speed == 10 ? SPEED_10 : SPEED_100;
- ecmd.duplex = options.duplex == 1 ? DUPLEX_HALF : DUPLEX_FULL;
- ep = &ecmd;
- } else {
- ep = NULL;
- }
- tc35815_start_auto_negotiation(dev, ep);
+ if (!lp->phy_dev)
+ return -ENODEV;
+ return phy_mii_ioctl(lp->phy_dev, if_mii(rq), cmd);
}
static void tc35815_chip_reset(struct net_device *dev)
@@ -2862,13 +2368,11 @@ static void tc35815_chip_reset(struct net_device *dev)
static void tc35815_chip_init(struct net_device *dev)
{
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
struct tc35815_regs __iomem *tr =
(struct tc35815_regs __iomem *)dev->base_addr;
unsigned long txctl = TX_CTL_CMD;
- tc35815_phy_chip_init(dev);
-
/* load station address to CAM */
tc35815_set_cam_entry(dev, CAM_ENTRY_SOURCE, dev->dev_addr);
@@ -2905,12 +2409,11 @@ static void tc35815_chip_init(struct net_device *dev)
/* start MAC transmitter */
#ifndef NO_CHECK_CARRIER
/* TX4939 does not have EnLCarr */
- if (lp->boardtype == TC35815_TX4939)
+ if (lp->chiptype == TC35815_TX4939)
txctl &= ~Tx_EnLCarr;
#ifdef WORKAROUND_LOSTCAR
/* WORKAROUND: ignore LostCrS in full duplex operation */
- if ((lp->timer_state != asleep && lp->timer_state != lcheck) ||
- lp->fullduplex)
+ if (!lp->phy_dev || !lp->link || lp->duplex == DUPLEX_FULL)
txctl &= ~Tx_EnLCarr;
#endif
#endif /* !NO_CHECK_CARRIER */
@@ -2924,15 +2427,16 @@ static void tc35815_chip_init(struct net_device *dev)
static int tc35815_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct tc35815_local *lp = dev->priv;
+ struct tc35815_local *lp = netdev_priv(dev);
unsigned long flags;
pci_save_state(pdev);
if (!netif_running(dev))
return 0;
netif_device_detach(dev);
+ if (lp->phy_dev)
+ phy_stop(lp->phy_dev);
spin_lock_irqsave(&lp->lock, flags);
- del_timer(&lp->timer); /* Kill if running */
tc35815_chip_reset(dev);
spin_unlock_irqrestore(&lp->lock, flags);
pci_set_power_state(pdev, PCI_D3hot);
@@ -2942,16 +2446,15 @@ static int tc35815_suspend(struct pci_dev *pdev, pm_message_t state)
static int tc35815_resume(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
- struct tc35815_local *lp = dev->priv;
- unsigned long flags;
+ struct tc35815_local *lp = netdev_priv(dev);
pci_restore_state(pdev);
if (!netif_running(dev))
return 0;
pci_set_power_state(pdev, PCI_D0);
- spin_lock_irqsave(&lp->lock, flags);
tc35815_restart(dev);
- spin_unlock_irqrestore(&lp->lock, flags);
+ if (lp->phy_dev)
+ phy_start(lp->phy_dev);
netif_device_attach(dev);
return 0;
}
@@ -2972,8 +2475,6 @@ module_param_named(speed, options.speed, int, 0);
MODULE_PARM_DESC(speed, "0:auto, 10:10Mbps, 100:100Mbps");
module_param_named(duplex, options.duplex, int, 0);
MODULE_PARM_DESC(duplex, "0:auto, 1:half, 2:full");
-module_param_named(doforce, options.doforce, int, 0);
-MODULE_PARM_DESC(doforce, "try force link mode if auto-negotiation failed");
static int __init tc35815_init_module(void)
{