summaryrefslogtreecommitdiff
path: root/drivers/net/tg3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/tg3.c')
-rw-r--r--drivers/net/tg3.c88
1 files changed, 53 insertions, 35 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index afb79db5327e..5faa87d86c66 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -32,6 +32,7 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/ethtool.h>
+#include <linux/mdio.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/brcmphy.h>
@@ -69,10 +70,10 @@
#define DRV_MODULE_NAME "tg3"
#define TG3_MAJ_NUM 3
-#define TG3_MIN_NUM 115
+#define TG3_MIN_NUM 116
#define DRV_MODULE_VERSION \
__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE "October 14, 2010"
+#define DRV_MODULE_RELDATE "December 3, 2010"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1769,9 +1770,9 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
if (tp->link_config.autoneg == AUTONEG_ENABLE &&
current_link_up == 1 &&
- (tp->link_config.active_speed == SPEED_1000 ||
- (tp->link_config.active_speed == SPEED_100 &&
- tp->link_config.active_duplex == DUPLEX_FULL))) {
+ tp->link_config.active_duplex == DUPLEX_FULL &&
+ (tp->link_config.active_speed == SPEED_100 ||
+ tp->link_config.active_speed == SPEED_1000)) {
u32 eeectl;
if (tp->link_config.active_speed == SPEED_1000)
@@ -1781,7 +1782,8 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
tw32(TG3_CPMU_EEE_CTRL, eeectl);
- tg3_phy_cl45_read(tp, 0x7, TG3_CL45_D7_EEERES_STAT, &val);
+ tg3_phy_cl45_read(tp, MDIO_MMD_AN,
+ TG3_CL45_D7_EEERES_STAT, &val);
if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
@@ -2967,7 +2969,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
}
if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
- u32 val = 0;
+ u32 val;
tw32(TG3_CPMU_EEE_MODE,
tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
@@ -2984,19 +2986,18 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
tg3_phydsp_write(tp, MII_TG3_DSP_CH34TP2,
val | MII_TG3_DSP_CH34TP2_HIBW01);
+ val = 0;
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
/* Advertise 100-BaseTX EEE ability */
if (tp->link_config.advertising &
- (ADVERTISED_100baseT_Half |
- ADVERTISED_100baseT_Full))
- val |= TG3_CL45_D7_EEEADV_CAP_100TX;
+ ADVERTISED_100baseT_Full)
+ val |= MDIO_AN_EEE_ADV_100TX;
/* Advertise 1000-BaseT EEE ability */
if (tp->link_config.advertising &
- (ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full))
- val |= TG3_CL45_D7_EEEADV_CAP_1000T;
+ ADVERTISED_1000baseT_Full)
+ val |= MDIO_AN_EEE_ADV_1000T;
}
- tg3_phy_cl45_write(tp, 0x7, TG3_CL45_D7_EEEADV_CAP, val);
+ tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
/* Turn off SM_DSP clock. */
val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
@@ -5761,7 +5762,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping, mapping);
if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
- !mss && skb->len > ETH_DATA_LEN)
+ !mss && skb->len > VLAN_ETH_FRAME_LEN)
base_flags |= TXD_FLAG_JMB_PKT;
tg3_set_txd(tnapi, entry, mapping, len, base_flags,
@@ -5995,7 +5996,7 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
#endif
if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
- !mss && skb->len > ETH_DATA_LEN)
+ !mss && skb->len > VLAN_ETH_FRAME_LEN)
base_flags |= TXD_FLAG_JMB_PKT;
len = skb_headlen(skb);
@@ -7809,6 +7810,37 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)
tg3_abort_hw(tp, 1);
+ /* Enable MAC control of LPI */
+ if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
+ tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
+ TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
+ TG3_CPMU_EEE_LNKIDL_UART_IDL);
+
+ tw32_f(TG3_CPMU_EEE_CTRL,
+ TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
+
+ val = TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
+ TG3_CPMU_EEEMD_LPI_IN_TX |
+ TG3_CPMU_EEEMD_LPI_IN_RX |
+ TG3_CPMU_EEEMD_EEE_ENABLE;
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
+ val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN;
+
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ val |= TG3_CPMU_EEEMD_APE_TX_DET_EN;
+
+ tw32_f(TG3_CPMU_EEE_MODE, val);
+
+ tw32_f(TG3_CPMU_EEE_DBTMR1,
+ TG3_CPMU_DBTMR1_PCIEXIT_2047US |
+ TG3_CPMU_DBTMR1_LNKIDLE_2047US);
+
+ tw32_f(TG3_CPMU_EEE_DBTMR2,
+ TG3_CPMU_DBTMR1_APE_TX_2047US |
+ TG3_CPMU_DBTMR2_TXIDXEQ_2047US);
+ }
+
if (reset_phy)
tg3_phy_reset(tp);
@@ -7890,22 +7922,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32(TG3_CPMU_LSPD_10MB_CLK, val);
}
- /* Enable MAC control of LPI */
- if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
- tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
- TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
- TG3_CPMU_EEE_LNKIDL_UART_IDL);
-
- tw32_f(TG3_CPMU_EEE_CTRL,
- TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
-
- tw32_f(TG3_CPMU_EEE_MODE,
- TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
- TG3_CPMU_EEEMD_LPI_IN_TX |
- TG3_CPMU_EEEMD_LPI_IN_RX |
- TG3_CPMU_EEEMD_EEE_ENABLE);
- }
-
/* This works around an issue with Athlon chipsets on
* B3 tigon3 silicon. This bit has no effect on any
* other revision. But do not set this on PCI Express
@@ -12569,9 +12585,11 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
}
}
- if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 ||
- (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
- tp->pci_chip_rev_id != CHIPREV_ID_57765_A0))
+ if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
+ ((tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 &&
+ tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) ||
+ (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+ tp->pci_chip_rev_id != CHIPREV_ID_57765_A0)))
tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-15 15:35:42 +0000