diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath12k/reg.c')
-rw-r--r-- | drivers/net/wireless/ath/ath12k/reg.c | 177 |
1 files changed, 147 insertions, 30 deletions
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c index 439d61f284d8..7048834e0d14 100644 --- a/drivers/net/wireless/ath/ath12k/reg.c +++ b/drivers/net/wireless/ath/ath12k/reg.c @@ -1,11 +1,12 @@ // SPDX-License-Identifier: BSD-3-Clause-Clear /* * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2021-2025 Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/rtnetlink.h> #include "core.h" #include "debug.h" +#include "mac.h" /* World regdom to be used in case default regd from fw is unavailable */ #define ATH12K_2GHZ_CH01_11 REG_RULE(2412 - 10, 2462 + 10, 40, 0, 20, 0) @@ -48,6 +49,7 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath12k_wmi_init_country_arg arg; + struct wmi_set_current_country_arg current_arg = {}; struct ath12k_hw *ah = ath12k_hw_to_ah(hw); struct ath12k *ar = ath12k_ah_to_ar(ah, 0); int ret, i; @@ -55,6 +57,24 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) ath12k_dbg(ar->ab, ATH12K_DBG_REG, "Regulatory Notification received for %s\n", wiphy_name(wiphy)); + if (request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { + ath12k_dbg(ar->ab, ATH12K_DBG_REG, + "driver initiated regd update\n"); + if (ah->state != ATH12K_HW_STATE_ON) + return; + + for_each_ar(ah, ar, i) { + ret = ath12k_reg_update_chan_list(ar, true); + if (ret) { + ath12k_warn(ar->ab, + "failed to update chan list for pdev %u, ret %d\n", + i, ret); + break; + } + } + return; + } + /* Currently supporting only General User Hints. Cell base user * hints to be handled later. * Hints from other sources like Core, Beacons are not expected for @@ -77,27 +97,38 @@ ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) return; } - /* Set the country code to the firmware and wait for - * the WMI_REG_CHAN_LIST_CC EVENT for updating the - * reg info - */ - arg.flags = ALPHA_IS_SET; - memcpy(&arg.cc_info.alpha2, request->alpha2, 2); - arg.cc_info.alpha2[2] = 0; - /* Allow fresh updates to wiphy regd */ ah->regd_updated = false; /* Send the reg change request to all the radios */ for_each_ar(ah, ar, i) { - ret = ath12k_wmi_send_init_country_cmd(ar, &arg); - if (ret) - ath12k_warn(ar->ab, - "INIT Country code set to fw failed : %d\n", ret); + if (ar->ab->hw_params->current_cc_support) { + memcpy(¤t_arg.alpha2, request->alpha2, 2); + memcpy(&ar->alpha2, ¤t_arg.alpha2, 2); + ret = ath12k_wmi_send_set_current_country_cmd(ar, ¤t_arg); + if (ret) + ath12k_warn(ar->ab, + "failed set current country code: %d\n", ret); + } else { + arg.flags = ALPHA_IS_SET; + memcpy(&arg.cc_info.alpha2, request->alpha2, 2); + arg.cc_info.alpha2[2] = 0; + + ret = ath12k_wmi_send_init_country_cmd(ar, &arg); + if (ret) + ath12k_warn(ar->ab, + "failed set INIT Country code: %d\n", ret); + } + + wiphy_lock(wiphy); + ath12k_mac_11d_scan_stop(ar); + wiphy_unlock(wiphy); + + ar->regdom_set_by_user = true; } } -int ath12k_reg_update_chan_list(struct ath12k *ar) +int ath12k_reg_update_chan_list(struct ath12k *ar, bool wait) { struct ieee80211_supported_band **bands; struct ath12k_wmi_scan_chan_list_arg *arg; @@ -106,7 +137,35 @@ int ath12k_reg_update_chan_list(struct ath12k *ar) struct ath12k_wmi_channel_arg *ch; enum nl80211_band band; int num_channels = 0; - int i, ret; + int i, ret, left; + + if (wait && ar->state_11d != ATH12K_11D_IDLE) { + left = wait_for_completion_timeout(&ar->completed_11d_scan, + ATH12K_SCAN_TIMEOUT_HZ); + if (!left) { + ath12k_dbg(ar->ab, ATH12K_DBG_REG, + "failed to receive 11d scan complete: timed out\n"); + ar->state_11d = ATH12K_11D_IDLE; + } + ath12k_dbg(ar->ab, ATH12K_DBG_REG, + "reg 11d scan wait left time %d\n", left); + } + + if (wait && + (ar->scan.state == ATH12K_SCAN_STARTING || + ar->scan.state == ATH12K_SCAN_RUNNING)) { + left = wait_for_completion_timeout(&ar->scan.completed, + ATH12K_SCAN_TIMEOUT_HZ); + if (!left) + ath12k_dbg(ar->ab, ATH12K_DBG_REG, + "failed to receive hw scan complete: timed out\n"); + + ath12k_dbg(ar->ab, ATH12K_DBG_REG, + "reg hw scan wait left time %d\n", left); + } + + if (ar->ah->state == ATH12K_HW_STATE_RESTARTING) + return 0; bands = hw->wiphy->bands; for (band = 0; band < NUM_NL80211_BANDS; band++) { @@ -206,15 +265,57 @@ static void ath12k_copy_regd(struct ieee80211_regdomain *regd_orig, int ath12k_regd_update(struct ath12k *ar, bool init) { + u32 phy_id, freq_low = 0, freq_high = 0, supported_bands, band; + struct ath12k_wmi_hal_reg_capabilities_ext_arg *reg_cap; struct ath12k_hw *ah = ath12k_ar_to_ah(ar); struct ieee80211_hw *hw = ah->hw; struct ieee80211_regdomain *regd, *regd_copy = NULL; int ret, regd_len, pdev_id; struct ath12k_base *ab; - int i; ab = ar->ab; + supported_bands = ar->pdev->cap.supported_bands; + if (supported_bands & WMI_HOST_WLAN_2GHZ_CAP) { + band = NL80211_BAND_2GHZ; + } else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && !ar->supports_6ghz) { + band = NL80211_BAND_5GHZ; + } else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && ar->supports_6ghz) { + band = NL80211_BAND_6GHZ; + } else { + /* This condition is not expected. + */ + WARN_ON(1); + ret = -EINVAL; + goto err; + } + + reg_cap = &ab->hal_reg_cap[ar->pdev_idx]; + + if (ab->hw_params->single_pdev_only && !ar->supports_6ghz) { + phy_id = ar->pdev->cap.band[band].phy_id; + reg_cap = &ab->hal_reg_cap[phy_id]; + } + + /* Possible that due to reg change, current limits for supported + * frequency changed. Update that + */ + if (supported_bands & WMI_HOST_WLAN_2GHZ_CAP) { + freq_low = max(reg_cap->low_2ghz_chan, ab->reg_freq_2ghz.start_freq); + freq_high = min(reg_cap->high_2ghz_chan, ab->reg_freq_2ghz.end_freq); + } else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && !ar->supports_6ghz) { + freq_low = max(reg_cap->low_5ghz_chan, ab->reg_freq_5ghz.start_freq); + freq_high = min(reg_cap->high_5ghz_chan, ab->reg_freq_5ghz.end_freq); + } else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && ar->supports_6ghz) { + freq_low = max(reg_cap->low_5ghz_chan, ab->reg_freq_6ghz.start_freq); + freq_high = min(reg_cap->high_5ghz_chan, ab->reg_freq_6ghz.end_freq); + } + + ath12k_mac_update_freq_range(ar, freq_low, freq_high); + + ath12k_dbg(ab, ATH12K_DBG_REG, "pdev %u reg updated freq limits %u->%u MHz\n", + ar->pdev->pdev_id, freq_low, freq_high); + /* If one of the radios within ah has already updated the regd for * the wiphy, then avoid setting regd again */ @@ -275,11 +376,7 @@ int ath12k_regd_update(struct ath12k *ar, bool init) goto err; } - rtnl_lock(); - wiphy_lock(hw->wiphy); - ret = regulatory_set_wiphy_regd_sync(hw->wiphy, regd_copy); - wiphy_unlock(hw->wiphy); - rtnl_unlock(); + ret = regulatory_set_wiphy_regd(hw->wiphy, regd_copy); kfree(regd_copy); @@ -290,15 +387,7 @@ int ath12k_regd_update(struct ath12k *ar, bool init) goto skip; ah->regd_updated = true; - /* Apply the new regd to all the radios, this is expected to be received only once - * since we check for ah->regd_updated and allow here only once. - */ - for_each_ar(ah, ar, i) { - ab = ar->ab; - ret = ath12k_reg_update_chan_list(ar); - if (ret) - goto err; - } + skip: return 0; err: @@ -611,6 +700,16 @@ ath12k_reg_update_weather_radar_band(struct ath12k_base *ab, *rule_idx = i; } +static void ath12k_reg_update_freq_range(struct ath12k_reg_freq *reg_freq, + struct ath12k_reg_rule *reg_rule) +{ + if (reg_freq->start_freq > reg_rule->start_freq) + reg_freq->start_freq = reg_rule->start_freq; + + if (reg_freq->end_freq < reg_rule->end_freq) + reg_freq->end_freq = reg_rule->end_freq; +} + struct ieee80211_regdomain * ath12k_reg_build_regd(struct ath12k_base *ab, struct ath12k_reg_info *reg_info, bool intersect) @@ -654,6 +753,16 @@ ath12k_reg_build_regd(struct ath12k_base *ab, "\r\nCountry %s, CFG Regdomain %s FW Regdomain %d, num_reg_rules %d\n", alpha2, ath12k_reg_get_regdom_str(tmp_regd->dfs_region), reg_info->dfs_region, num_rules); + + /* Reset start and end frequency for each band + */ + ab->reg_freq_5ghz.start_freq = INT_MAX; + ab->reg_freq_5ghz.end_freq = 0; + ab->reg_freq_2ghz.start_freq = INT_MAX; + ab->reg_freq_2ghz.end_freq = 0; + ab->reg_freq_6ghz.start_freq = INT_MAX; + ab->reg_freq_6ghz.end_freq = 0; + /* Update reg_rules[] below. Firmware is expected to * send these rules in order(2G rules first and then 5G) */ @@ -664,6 +773,7 @@ ath12k_reg_build_regd(struct ath12k_base *ab, max_bw = min_t(u16, reg_rule->max_bw, reg_info->max_bw_2g); flags = 0; + ath12k_reg_update_freq_range(&ab->reg_freq_2ghz, reg_rule); } else if (reg_info->num_5g_reg_rules && (j < reg_info->num_5g_reg_rules)) { reg_rule = reg_info->reg_rules_5g_ptr + j++; @@ -677,6 +787,7 @@ ath12k_reg_build_regd(struct ath12k_base *ab, * per other BW rule flags we pass from here */ flags = NL80211_RRF_AUTO_BW; + ath12k_reg_update_freq_range(&ab->reg_freq_5ghz, reg_rule); } else if (reg_info->is_ext_reg_event && reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP] && (k < reg_info->num_6g_reg_rules_ap[WMI_REG_INDOOR_AP])) { @@ -684,6 +795,7 @@ ath12k_reg_build_regd(struct ath12k_base *ab, max_bw = min_t(u16, reg_rule->max_bw, reg_info->max_bw_6g_ap[WMI_REG_INDOOR_AP]); flags = NL80211_RRF_AUTO_BW; + ath12k_reg_update_freq_range(&ab->reg_freq_6ghz, reg_rule); } else { break; } @@ -770,6 +882,7 @@ void ath12k_regd_update_work(struct work_struct *work) void ath12k_reg_init(struct ieee80211_hw *hw) { hw->wiphy->regulatory_flags = REGULATORY_WIPHY_SELF_MANAGED; + hw->wiphy->flags |= WIPHY_FLAG_NOTIFY_REGDOM_BY_DRIVER; hw->wiphy->reg_notifier = ath12k_reg_notifier; } @@ -777,8 +890,12 @@ void ath12k_reg_free(struct ath12k_base *ab) { int i; + mutex_lock(&ab->core_lock); for (i = 0; i < ab->hw_params->max_radios; i++) { kfree(ab->default_regd[i]); kfree(ab->new_regd[i]); + ab->default_regd[i] = NULL; + ab->new_regd[i] = NULL; } + mutex_unlock(&ab->core_lock); } |