summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/phy.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/phy.c32
1 files changed, 16 insertions, 16 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 0fce1c76638e..641b13a279e1 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -75,13 +75,13 @@
/**
* ath5k_hw_radio_revision() - Get the PHY Chip revision
* @ah: The &struct ath5k_hw
- * @band: One of enum ieee80211_band
+ * @band: One of enum nl80211_band
*
* Returns the revision number of a 2GHz, 5GHz or single chip
* radio.
*/
u16
-ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
+ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band)
{
unsigned int i;
u32 srev;
@@ -91,10 +91,10 @@ ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
* Set the radio chip access register
*/
switch (band) {
- case IEEE80211_BAND_2GHZ:
+ case NL80211_BAND_2GHZ:
ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0));
break;
- case IEEE80211_BAND_5GHZ:
+ case NL80211_BAND_5GHZ:
ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
break;
default:
@@ -138,11 +138,11 @@ ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
u16 freq = channel->center_freq;
/* Check if the channel is in our supported range */
- if (channel->band == IEEE80211_BAND_2GHZ) {
+ if (channel->band == NL80211_BAND_2GHZ) {
if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) &&
(freq <= ah->ah_capabilities.cap_range.range_2ghz_max))
return true;
- } else if (channel->band == IEEE80211_BAND_5GHZ)
+ } else if (channel->band == NL80211_BAND_5GHZ)
if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) &&
(freq <= ah->ah_capabilities.cap_range.range_5ghz_max))
return true;
@@ -743,7 +743,7 @@ done:
/**
* ath5k_hw_rfgain_init() - Write initial RF gain settings to hw
* @ah: The &struct ath5k_hw
- * @band: One of enum ieee80211_band
+ * @band: One of enum nl80211_band
*
* Write initial RF gain table to set the RF sensitivity.
*
@@ -751,7 +751,7 @@ done:
* with Gain_F calibration
*/
static int
-ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
+ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum nl80211_band band)
{
const struct ath5k_ini_rfgain *ath5k_rfg;
unsigned int i, size, index;
@@ -786,7 +786,7 @@ ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
return -EINVAL;
}
- index = (band == IEEE80211_BAND_2GHZ) ? 1 : 0;
+ index = (band == NL80211_BAND_2GHZ) ? 1 : 0;
for (i = 0; i < size; i++) {
AR5K_REG_WAIT(i);
@@ -917,7 +917,7 @@ ath5k_hw_rfregs_init(struct ath5k_hw *ah,
}
/* Set Output and Driver bias current (OB/DB) */
- if (channel->band == IEEE80211_BAND_2GHZ) {
+ if (channel->band == NL80211_BAND_2GHZ) {
if (channel->hw_value == AR5K_MODE_11B)
ee_mode = AR5K_EEPROM_MODE_11B;
@@ -944,7 +944,7 @@ ath5k_hw_rfregs_init(struct ath5k_hw *ah,
AR5K_RF_DB_2GHZ, true);
/* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */
- } else if ((channel->band == IEEE80211_BAND_5GHZ) ||
+ } else if ((channel->band == NL80211_BAND_5GHZ) ||
(ah->ah_radio == AR5K_RF5111)) {
/* For 11a, Turbo and XR we need to choose
@@ -1145,7 +1145,7 @@ ath5k_hw_rfregs_init(struct ath5k_hw *ah,
}
if (ah->ah_radio == AR5K_RF5413 &&
- channel->band == IEEE80211_BAND_2GHZ) {
+ channel->band == NL80211_BAND_2GHZ) {
ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE,
true);
@@ -1270,7 +1270,7 @@ ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
*/
data0 = data1 = 0;
- if (channel->band == IEEE80211_BAND_2GHZ) {
+ if (channel->band == NL80211_BAND_2GHZ) {
/* Map 2GHz channel to 5GHz Atheros channel ID */
ret = ath5k_hw_rf5111_chan2athchan(
ieee80211_frequency_to_channel(channel->center_freq),
@@ -1446,7 +1446,7 @@ ath5k_hw_channel(struct ath5k_hw *ah,
"channel frequency (%u MHz) out of supported "
"band range\n",
channel->center_freq);
- return -EINVAL;
+ return -EINVAL;
}
/*
@@ -1919,7 +1919,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
/* Convert current frequency to fbin value (the same way channels
* are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale
* up by 2 so we can compare it later */
- if (channel->band == IEEE80211_BAND_2GHZ) {
+ if (channel->band == NL80211_BAND_2GHZ) {
chan_fbin = (channel->center_freq - 2300) * 10;
freq_band = AR5K_EEPROM_BAND_2GHZ;
} else {
@@ -1983,7 +1983,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4;
break;
default:
- if (channel->band == IEEE80211_BAND_5GHZ) {
+ if (channel->band == NL80211_BAND_5GHZ) {
/* Both sample_freq and chip_freq are 40MHz */
spur_delta_phase = (spur_offset << 17) / 25;
spur_freq_sigma_delta =