summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlegacy/4965.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlegacy/4965.h')
-rw-r--r--drivers/net/wireless/iwlegacy/4965.h1301
1 files changed, 1301 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlegacy/4965.h b/drivers/net/wireless/iwlegacy/4965.h
new file mode 100644
index 000000000000..f280e0161b17
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/4965.h
@@ -0,0 +1,1301 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __il_4965_h__
+#define __il_4965_h__
+
+struct il_rx_queue;
+struct il_rx_buf;
+struct il_rx_pkt;
+struct il_tx_queue;
+struct il_rxon_context;
+
+/* configuration for the _4965 devices */
+extern struct il_cfg il4965_cfg;
+
+extern struct il_mod_params il4965_mod_params;
+
+extern struct ieee80211_ops il4965_hw_ops;
+
+/* tx queue */
+void il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid,
+ int freed);
+
+/* RXON */
+void il4965_set_rxon_chain(struct il_priv *il, struct il_rxon_context *ctx);
+
+/* uCode */
+int il4965_verify_ucode(struct il_priv *il);
+
+/* lib */
+void il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status);
+
+void il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq);
+int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq);
+int il4965_hw_nic_init(struct il_priv *il);
+int il4965_dump_fh(struct il_priv *il, char **buf, bool display);
+
+/* rx */
+void il4965_rx_queue_restock(struct il_priv *il);
+void il4965_rx_replenish(struct il_priv *il);
+void il4965_rx_replenish_now(struct il_priv *il);
+void il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq);
+int il4965_rxq_stop(struct il_priv *il);
+int il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band);
+void il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb);
+void il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb);
+void il4965_rx_handle(struct il_priv *il);
+
+/* tx */
+void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq);
+int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
+ dma_addr_t addr, u16 len, u8 reset, u8 pad);
+int il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq);
+void il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags,
+ struct ieee80211_tx_info *info);
+int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb);
+int il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u16 tid, u16 * ssn);
+int il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u16 tid);
+int il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id);
+void il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb);
+int il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx);
+void il4965_hw_txq_ctx_free(struct il_priv *il);
+int il4965_txq_ctx_alloc(struct il_priv *il);
+void il4965_txq_ctx_reset(struct il_priv *il);
+void il4965_txq_ctx_stop(struct il_priv *il);
+void il4965_txq_set_sched(struct il_priv *il, u32 mask);
+
+/*
+ * Acquire il->lock before calling this function !
+ */
+void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx);
+/**
+ * il4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
+ * @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
+ * @scd_retry: (1) Indicates queue will be used in aggregation mode
+ *
+ * NOTE: Acquire il->lock before calling this function !
+ */
+void il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq,
+ int tx_fifo_id, int scd_retry);
+
+/* rx */
+void il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb);
+bool il4965_good_plcp_health(struct il_priv *il, struct il_rx_pkt *pkt);
+void il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb);
+void il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb);
+
+/* scan */
+int il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif);
+
+/* station mgmt */
+int il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
+ bool add);
+
+/* hcmd */
+int il4965_send_beacon_cmd(struct il_priv *il);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+const char *il4965_get_tx_fail_reason(u32 status);
+#else
+static inline const char *
+il4965_get_tx_fail_reason(u32 status)
+{
+ return "";
+}
+#endif
+
+/* station management */
+int il4965_alloc_bcast_station(struct il_priv *il, struct il_rxon_context *ctx);
+int il4965_add_bssid_station(struct il_priv *il, struct il_rxon_context *ctx,
+ const u8 *addr, u8 *sta_id_r);
+int il4965_remove_default_wep_key(struct il_priv *il,
+ struct il_rxon_context *ctx,
+ struct ieee80211_key_conf *key);
+int il4965_set_default_wep_key(struct il_priv *il, struct il_rxon_context *ctx,
+ struct ieee80211_key_conf *key);
+int il4965_restore_default_wep_keys(struct il_priv *il,
+ struct il_rxon_context *ctx);
+int il4965_set_dynamic_key(struct il_priv *il, struct il_rxon_context *ctx,
+ struct ieee80211_key_conf *key, u8 sta_id);
+int il4965_remove_dynamic_key(struct il_priv *il, struct il_rxon_context *ctx,
+ struct ieee80211_key_conf *key, u8 sta_id);
+void il4965_update_tkip_key(struct il_priv *il, struct il_rxon_context *ctx,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta, u32 iv32,
+ u16 *phase1key);
+int il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid);
+int il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta,
+ int tid, u16 ssn);
+int il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta,
+ int tid);
+void il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt);
+int il4965_update_bcast_stations(struct il_priv *il);
+
+/* rate */
+static inline u8
+il4965_hw_get_rate(__le32 rate_n_flags)
+{
+ return le32_to_cpu(rate_n_flags) & 0xFF;
+}
+
+/* eeprom */
+void il4965_eeprom_get_mac(const struct il_priv *il, u8 * mac);
+int il4965_eeprom_acquire_semaphore(struct il_priv *il);
+void il4965_eeprom_release_semaphore(struct il_priv *il);
+int il4965_eeprom_check_version(struct il_priv *il);
+
+/* mac80211 handlers (for 4965) */
+void il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
+int il4965_mac_start(struct ieee80211_hw *hw);
+void il4965_mac_stop(struct ieee80211_hw *hw);
+void il4965_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags, u64 multicast);
+int il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key);
+void il4965_mac_update_tkip_key(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta, u32 iv32,
+ u16 *phase1key);
+int il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 * ssn,
+ u8 buf_size);
+int il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta);
+void il4965_mac_channel_switch(struct ieee80211_hw *hw,
+ struct ieee80211_channel_switch *ch_switch);
+
+void il4965_led_enable(struct il_priv *il);
+
+/* EEPROM */
+#define IL4965_EEPROM_IMG_SIZE 1024
+
+/*
+ * uCode queue management definitions ...
+ * The first queue used for block-ack aggregation is #7 (4965 only).
+ * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
+ */
+#define IL49_FIRST_AMPDU_QUEUE 7
+
+/* Sizes and addresses for instruction and data memory (SRAM) in
+ * 4965's embedded processor. Driver access is via HBUS_TARG_MEM_* regs. */
+#define IL49_RTC_INST_LOWER_BOUND (0x000000)
+#define IL49_RTC_INST_UPPER_BOUND (0x018000)
+
+#define IL49_RTC_DATA_LOWER_BOUND (0x800000)
+#define IL49_RTC_DATA_UPPER_BOUND (0x80A000)
+
+#define IL49_RTC_INST_SIZE (IL49_RTC_INST_UPPER_BOUND - \
+ IL49_RTC_INST_LOWER_BOUND)
+#define IL49_RTC_DATA_SIZE (IL49_RTC_DATA_UPPER_BOUND - \
+ IL49_RTC_DATA_LOWER_BOUND)
+
+#define IL49_MAX_INST_SIZE IL49_RTC_INST_SIZE
+#define IL49_MAX_DATA_SIZE IL49_RTC_DATA_SIZE
+
+/* Size of uCode instruction memory in bootstrap state machine */
+#define IL49_MAX_BSM_SIZE BSM_SRAM_SIZE
+
+static inline int
+il4965_hw_valid_rtc_data_addr(u32 addr)
+{
+ return (addr >= IL49_RTC_DATA_LOWER_BOUND &&
+ addr < IL49_RTC_DATA_UPPER_BOUND);
+}
+
+/********************* START TEMPERATURE *************************************/
+
+/**
+ * 4965 temperature calculation.
+ *
+ * The driver must calculate the device temperature before calculating
+ * a txpower setting (amplifier gain is temperature dependent). The
+ * calculation uses 4 measurements, 3 of which (R1, R2, R3) are calibration
+ * values used for the life of the driver, and one of which (R4) is the
+ * real-time temperature indicator.
+ *
+ * uCode provides all 4 values to the driver via the "initialize alive"
+ * notification (see struct il4965_init_alive_resp). After the runtime uCode
+ * image loads, uCode updates the R4 value via stats notifications
+ * (see N_STATS), which occur after each received beacon
+ * when associated, or can be requested via C_STATS.
+ *
+ * NOTE: uCode provides the R4 value as a 23-bit signed value. Driver
+ * must sign-extend to 32 bits before applying formula below.
+ *
+ * Formula:
+ *
+ * degrees Kelvin = ((97 * 259 * (R4 - R2) / (R3 - R1)) / 100) + 8
+ *
+ * NOTE: The basic formula is 259 * (R4-R2) / (R3-R1). The 97/100 is
+ * an additional correction, which should be centered around 0 degrees
+ * Celsius (273 degrees Kelvin). The 8 (3 percent of 273) compensates for
+ * centering the 97/100 correction around 0 degrees K.
+ *
+ * Add 273 to Kelvin value to find degrees Celsius, for comparing current
+ * temperature with factory-measured temperatures when calculating txpower
+ * settings.
+ */
+#define TEMPERATURE_CALIB_KELVIN_OFFSET 8
+#define TEMPERATURE_CALIB_A_VAL 259
+
+/* Limit range of calculated temperature to be between these Kelvin values */
+#define IL_TX_POWER_TEMPERATURE_MIN (263)
+#define IL_TX_POWER_TEMPERATURE_MAX (410)
+
+#define IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(t) \
+ ((t) < IL_TX_POWER_TEMPERATURE_MIN || \
+ (t) > IL_TX_POWER_TEMPERATURE_MAX)
+
+/********************* END TEMPERATURE ***************************************/
+
+/********************* START TXPOWER *****************************************/
+
+/**
+ * 4965 txpower calculations rely on information from three sources:
+ *
+ * 1) EEPROM
+ * 2) "initialize" alive notification
+ * 3) stats notifications
+ *
+ * EEPROM data consists of:
+ *
+ * 1) Regulatory information (max txpower and channel usage flags) is provided
+ * separately for each channel that can possibly supported by 4965.
+ * 40 MHz wide (.11n HT40) channels are listed separately from 20 MHz
+ * (legacy) channels.
+ *
+ * See struct il4965_eeprom_channel for format, and struct il4965_eeprom
+ * for locations in EEPROM.
+ *
+ * 2) Factory txpower calibration information is provided separately for
+ * sub-bands of contiguous channels. 2.4GHz has just one sub-band,
+ * but 5 GHz has several sub-bands.
+ *
+ * In addition, per-band (2.4 and 5 Ghz) saturation txpowers are provided.
+ *
+ * See struct il4965_eeprom_calib_info (and the tree of structures
+ * contained within it) for format, and struct il4965_eeprom for
+ * locations in EEPROM.
+ *
+ * "Initialization alive" notification (see struct il4965_init_alive_resp)
+ * consists of:
+ *
+ * 1) Temperature calculation parameters.
+ *
+ * 2) Power supply voltage measurement.
+ *
+ * 3) Tx gain compensation to balance 2 transmitters for MIMO use.
+ *
+ * Statistics notifications deliver:
+ *
+ * 1) Current values for temperature param R4.
+ */
+
+/**
+ * To calculate a txpower setting for a given desired target txpower, channel,
+ * modulation bit rate, and transmitter chain (4965 has 2 transmitters to
+ * support MIMO and transmit diversity), driver must do the following:
+ *
+ * 1) Compare desired txpower vs. (EEPROM) regulatory limit for this channel.
+ * Do not exceed regulatory limit; reduce target txpower if necessary.
+ *
+ * If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31),
+ * 2 transmitters will be used simultaneously; driver must reduce the
+ * regulatory limit by 3 dB (half-power) for each transmitter, so the
+ * combined total output of the 2 transmitters is within regulatory limits.
+ *
+ *
+ * 2) Compare target txpower vs. (EEPROM) saturation txpower *reduced by
+ * backoff for this bit rate*. Do not exceed (saturation - backoff[rate]);
+ * reduce target txpower if necessary.
+ *
+ * Backoff values below are in 1/2 dB units (equivalent to steps in
+ * txpower gain tables):
+ *
+ * OFDM 6 - 36 MBit: 10 steps (5 dB)
+ * OFDM 48 MBit: 15 steps (7.5 dB)
+ * OFDM 54 MBit: 17 steps (8.5 dB)
+ * OFDM 60 MBit: 20 steps (10 dB)
+ * CCK all rates: 10 steps (5 dB)
+ *
+ * Backoff values apply to saturation txpower on a per-transmitter basis;
+ * when using MIMO (2 transmitters), each transmitter uses the same
+ * saturation level provided in EEPROM, and the same backoff values;
+ * no reduction (such as with regulatory txpower limits) is required.
+ *
+ * Saturation and Backoff values apply equally to 20 Mhz (legacy) channel
+ * widths and 40 Mhz (.11n HT40) channel widths; there is no separate
+ * factory measurement for ht40 channels.
+ *
+ * The result of this step is the final target txpower. The rest of
+ * the steps figure out the proper settings for the device to achieve
+ * that target txpower.
+ *
+ *
+ * 3) Determine (EEPROM) calibration sub band for the target channel, by
+ * comparing against first and last channels in each sub band
+ * (see struct il4965_eeprom_calib_subband_info).
+ *
+ *
+ * 4) Linearly interpolate (EEPROM) factory calibration measurement sets,
+ * referencing the 2 factory-measured (sample) channels within the sub band.
+ *
+ * Interpolation is based on difference between target channel's frequency
+ * and the sample channels' frequencies. Since channel numbers are based
+ * on frequency (5 MHz between each channel number), this is equivalent
+ * to interpolating based on channel number differences.
+ *
+ * Note that the sample channels may or may not be the channels at the
+ * edges of the sub band. The target channel may be "outside" of the
+ * span of the sampled channels.
+ *
+ * Driver may choose the pair (for 2 Tx chains) of measurements (see
+ * struct il4965_eeprom_calib_ch_info) for which the actual measured
+ * txpower comes closest to the desired txpower. Usually, though,
+ * the middle set of measurements is closest to the regulatory limits,
+ * and is therefore a good choice for all txpower calculations (this
+ * assumes that high accuracy is needed for maximizing legal txpower,
+ * while lower txpower configurations do not need as much accuracy).
+ *
+ * Driver should interpolate both members of the chosen measurement pair,
+ * i.e. for both Tx chains (radio transmitters), unless the driver knows
+ * that only one of the chains will be used (e.g. only one tx antenna
+ * connected, but this should be unusual). The rate scaling algorithm
+ * switches antennas to find best performance, so both Tx chains will
+ * be used (although only one at a time) even for non-MIMO transmissions.
+ *
+ * Driver should interpolate factory values for temperature, gain table
+ * idx, and actual power. The power amplifier detector values are
+ * not used by the driver.
+ *
+ * Sanity check: If the target channel happens to be one of the sample
+ * channels, the results should agree with the sample channel's
+ * measurements!
+ *
+ *
+ * 5) Find difference between desired txpower and (interpolated)
+ * factory-measured txpower. Using (interpolated) factory gain table idx
+ * (shown elsewhere) as a starting point, adjust this idx lower to
+ * increase txpower, or higher to decrease txpower, until the target
+ * txpower is reached. Each step in the gain table is 1/2 dB.
+ *
+ * For example, if factory measured txpower is 16 dBm, and target txpower
+ * is 13 dBm, add 6 steps to the factory gain idx to reduce txpower
+ * by 3 dB.
+ *
+ *
+ * 6) Find difference between current device temperature and (interpolated)
+ * factory-measured temperature for sub-band. Factory values are in
+ * degrees Celsius. To calculate current temperature, see comments for
+ * "4965 temperature calculation".
+ *
+ * If current temperature is higher than factory temperature, driver must
+ * increase gain (lower gain table idx), and vice verse.
+ *
+ * Temperature affects gain differently for different channels:
+ *
+ * 2.4 GHz all channels: 3.5 degrees per half-dB step
+ * 5 GHz channels 34-43: 4.5 degrees per half-dB step
+ * 5 GHz channels >= 44: 4.0 degrees per half-dB step
+ *
+ * NOTE: Temperature can increase rapidly when transmitting, especially
+ * with heavy traffic at high txpowers. Driver should update
+ * temperature calculations often under these conditions to
+ * maintain strong txpower in the face of rising temperature.
+ *
+ *
+ * 7) Find difference between current power supply voltage indicator
+ * (from "initialize alive") and factory-measured power supply voltage
+ * indicator (EEPROM).
+ *
+ * If the current voltage is higher (indicator is lower) than factory
+ * voltage, gain should be reduced (gain table idx increased) by:
+ *
+ * (eeprom - current) / 7
+ *
+ * If the current voltage is lower (indicator is higher) than factory
+ * voltage, gain should be increased (gain table idx decreased) by:
+ *
+ * 2 * (current - eeprom) / 7
+ *
+ * If number of idx steps in either direction turns out to be > 2,
+ * something is wrong ... just use 0.
+ *
+ * NOTE: Voltage compensation is independent of band/channel.
+ *
+ * NOTE: "Initialize" uCode measures current voltage, which is assumed
+ * to be constant after this initial measurement. Voltage
+ * compensation for txpower (number of steps in gain table)
+ * may be calculated once and used until the next uCode bootload.
+ *
+ *
+ * 8) If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31),
+ * adjust txpower for each transmitter chain, so txpower is balanced
+ * between the two chains. There are 5 pairs of tx_atten[group][chain]
+ * values in "initialize alive", one pair for each of 5 channel ranges:
+ *
+ * Group 0: 5 GHz channel 34-43
+ * Group 1: 5 GHz channel 44-70
+ * Group 2: 5 GHz channel 71-124
+ * Group 3: 5 GHz channel 125-200
+ * Group 4: 2.4 GHz all channels
+ *
+ * Add the tx_atten[group][chain] value to the idx for the target chain.
+ * The values are signed, but are in pairs of 0 and a non-negative number,
+ * so as to reduce gain (if necessary) of the "hotter" channel. This
+ * avoids any need to double-check for regulatory compliance after
+ * this step.
+ *
+ *
+ * 9) If setting up for a CCK rate, lower the gain by adding a CCK compensation
+ * value to the idx:
+ *
+ * Hardware rev B: 9 steps (4.5 dB)
+ * Hardware rev C: 5 steps (2.5 dB)
+ *
+ * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
+ * bits [3:2], 1 = B, 2 = C.
+ *
+ * NOTE: This compensation is in addition to any saturation backoff that
+ * might have been applied in an earlier step.
+ *
+ *
+ * 10) Select the gain table, based on band (2.4 vs 5 GHz).
+ *
+ * Limit the adjusted idx to stay within the table!
+ *
+ *
+ * 11) Read gain table entries for DSP and radio gain, place into appropriate
+ * location(s) in command (struct il4965_txpowertable_cmd).
+ */
+
+/**
+ * When MIMO is used (2 transmitters operating simultaneously), driver should
+ * limit each transmitter to deliver a max of 3 dB below the regulatory limit
+ * for the device. That is, use half power for each transmitter, so total
+ * txpower is within regulatory limits.
+ *
+ * The value "6" represents number of steps in gain table to reduce power 3 dB.
+ * Each step is 1/2 dB.
+ */
+#define IL_TX_POWER_MIMO_REGULATORY_COMPENSATION (6)
+
+/**
+ * CCK gain compensation.
+ *
+ * When calculating txpowers for CCK, after making sure that the target power
+ * is within regulatory and saturation limits, driver must additionally
+ * back off gain by adding these values to the gain table idx.
+ *
+ * Hardware rev for 4965 can be determined by reading CSR_HW_REV_WA_REG,
+ * bits [3:2], 1 = B, 2 = C.
+ */
+#define IL_TX_POWER_CCK_COMPENSATION_B_STEP (9)
+#define IL_TX_POWER_CCK_COMPENSATION_C_STEP (5)
+
+/*
+ * 4965 power supply voltage compensation for txpower
+ */
+#define TX_POWER_IL_VOLTAGE_CODES_PER_03V (7)
+
+/**
+ * Gain tables.
+ *
+ * The following tables contain pair of values for setting txpower, i.e.
+ * gain settings for the output of the device's digital signal processor (DSP),
+ * and for the analog gain structure of the transmitter.
+ *
+ * Each entry in the gain tables represents a step of 1/2 dB. Note that these
+ * are *relative* steps, not indications of absolute output power. Output
+ * power varies with temperature, voltage, and channel frequency, and also
+ * requires consideration of average power (to satisfy regulatory constraints),
+ * and peak power (to avoid distortion of the output signal).
+ *
+ * Each entry contains two values:
+ * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
+ * linear value that multiplies the output of the digital signal processor,
+ * before being sent to the analog radio.
+ * 2) Radio gain. This sets the analog gain of the radio Tx path.
+ * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
+ *
+ * EEPROM contains factory calibration data for txpower. This maps actual
+ * measured txpower levels to gain settings in the "well known" tables
+ * below ("well-known" means here that both factory calibration *and* the
+ * driver work with the same table).
+ *
+ * There are separate tables for 2.4 GHz and 5 GHz bands. The 5 GHz table
+ * has an extension (into negative idxes), in case the driver needs to
+ * boost power setting for high device temperatures (higher than would be
+ * present during factory calibration). A 5 Ghz EEPROM idx of "40"
+ * corresponds to the 49th entry in the table used by the driver.
+ */
+#define MIN_TX_GAIN_IDX (0) /* highest gain, lowest idx, 2.4 */
+#define MIN_TX_GAIN_IDX_52GHZ_EXT (-9) /* highest gain, lowest idx, 5 */
+
+/**
+ * 2.4 GHz gain table
+ *
+ * Index Dsp gain Radio gain
+ * 0 110 0x3f (highest gain)
+ * 1 104 0x3f
+ * 2 98 0x3f
+ * 3 110 0x3e
+ * 4 104 0x3e
+ * 5 98 0x3e
+ * 6 110 0x3d
+ * 7 104 0x3d
+ * 8 98 0x3d
+ * 9 110 0x3c
+ * 10 104 0x3c
+ * 11 98 0x3c
+ * 12 110 0x3b
+ * 13 104 0x3b
+ * 14 98 0x3b
+ * 15 110 0x3a
+ * 16 104 0x3a
+ * 17 98 0x3a
+ * 18 110 0x39
+ * 19 104 0x39
+ * 20 98 0x39
+ * 21 110 0x38
+ * 22 104 0x38
+ * 23 98 0x38
+ * 24 110 0x37
+ * 25 104 0x37
+ * 26 98 0x37
+ * 27 110 0x36
+ * 28 104 0x36
+ * 29 98 0x36
+ * 30 110 0x35
+ * 31 104 0x35
+ * 32 98 0x35
+ * 33 110 0x34
+ * 34 104 0x34
+ * 35 98 0x34
+ * 36 110 0x33
+ * 37 104 0x33
+ * 38 98 0x33
+ * 39 110 0x32
+ * 40 104 0x32
+ * 41 98 0x32
+ * 42 110 0x31
+ * 43 104 0x31
+ * 44 98 0x31
+ * 45 110 0x30
+ * 46 104 0x30
+ * 47 98 0x30
+ * 48 110 0x6
+ * 49 104 0x6
+ * 50 98 0x6
+ * 51 110 0x5
+ * 52 104 0x5
+ * 53 98 0x5
+ * 54 110 0x4
+ * 55 104 0x4
+ * 56 98 0x4
+ * 57 110 0x3
+ * 58 104 0x3
+ * 59 98 0x3
+ * 60 110 0x2
+ * 61 104 0x2
+ * 62 98 0x2
+ * 63 110 0x1
+ * 64 104 0x1
+ * 65 98 0x1
+ * 66 110 0x0
+ * 67 104 0x0
+ * 68 98 0x0
+ * 69 97 0
+ * 70 96 0
+ * 71 95 0
+ * 72 94 0
+ * 73 93 0
+ * 74 92 0
+ * 75 91 0
+ * 76 90 0
+ * 77 89 0
+ * 78 88 0
+ * 79 87 0
+ * 80 86 0
+ * 81 85 0
+ * 82 84 0
+ * 83 83 0
+ * 84 82 0
+ * 85 81 0
+ * 86 80 0
+ * 87 79 0
+ * 88 78 0
+ * 89 77 0
+ * 90 76 0
+ * 91 75 0
+ * 92 74 0
+ * 93 73 0
+ * 94 72 0
+ * 95 71 0
+ * 96 70 0
+ * 97 69 0
+ * 98 68 0
+ */
+
+/**
+ * 5 GHz gain table
+ *
+ * Index Dsp gain Radio gain
+ * -9 123 0x3F (highest gain)
+ * -8 117 0x3F
+ * -7 110 0x3F
+ * -6 104 0x3F
+ * -5 98 0x3F
+ * -4 110 0x3E
+ * -3 104 0x3E
+ * -2 98 0x3E
+ * -1 110 0x3D
+ * 0 104 0x3D
+ * 1 98 0x3D
+ * 2 110 0x3C
+ * 3 104 0x3C
+ * 4 98 0x3C
+ * 5 110 0x3B
+ * 6 104 0x3B
+ * 7 98 0x3B
+ * 8 110 0x3A
+ * 9 104 0x3A
+ * 10 98 0x3A
+ * 11 110 0x39
+ * 12 104 0x39
+ * 13 98 0x39
+ * 14 110 0x38
+ * 15 104 0x38
+ * 16 98 0x38
+ * 17 110 0x37
+ * 18 104 0x37
+ * 19 98 0x37
+ * 20 110 0x36
+ * 21 104 0x36
+ * 22 98 0x36
+ * 23 110 0x35
+ * 24 104 0x35
+ * 25 98 0x35
+ * 26 110 0x34
+ * 27 104 0x34
+ * 28 98 0x34
+ * 29 110 0x33
+ * 30 104 0x33
+ * 31 98 0x33
+ * 32 110 0x32
+ * 33 104 0x32
+ * 34 98 0x32
+ * 35 110 0x31
+ * 36 104 0x31
+ * 37 98 0x31
+ * 38 110 0x30
+ * 39 104 0x30
+ * 40 98 0x30
+ * 41 110 0x25
+ * 42 104 0x25
+ * 43 98 0x25
+ * 44 110 0x24
+ * 45 104 0x24
+ * 46 98 0x24
+ * 47 110 0x23
+ * 48 104 0x23
+ * 49 98 0x23
+ * 50 110 0x22
+ * 51 104 0x18
+ * 52 98 0x18
+ * 53 110 0x17
+ * 54 104 0x17
+ * 55 98 0x17
+ * 56 110 0x16
+ * 57 104 0x16
+ * 58 98 0x16
+ * 59 110 0x15
+ * 60 104 0x15
+ * 61 98 0x15
+ * 62 110 0x14
+ * 63 104 0x14
+ * 64 98 0x14
+ * 65 110 0x13
+ * 66 104 0x13
+ * 67 98 0x13
+ * 68 110 0x12
+ * 69 104 0x08
+ * 70 98 0x08
+ * 71 110 0x07
+ * 72 104 0x07
+ * 73 98 0x07
+ * 74 110 0x06
+ * 75 104 0x06
+ * 76 98 0x06
+ * 77 110 0x05
+ * 78 104 0x05
+ * 79 98 0x05
+ * 80 110 0x04
+ * 81 104 0x04
+ * 82 98 0x04
+ * 83 110 0x03
+ * 84 104 0x03
+ * 85 98 0x03
+ * 86 110 0x02
+ * 87 104 0x02
+ * 88 98 0x02
+ * 89 110 0x01
+ * 90 104 0x01
+ * 91 98 0x01
+ * 92 110 0x00
+ * 93 104 0x00
+ * 94 98 0x00
+ * 95 93 0x00
+ * 96 88 0x00
+ * 97 83 0x00
+ * 98 78 0x00
+ */
+
+/**
+ * Sanity checks and default values for EEPROM regulatory levels.
+ * If EEPROM values fall outside MIN/MAX range, use default values.
+ *
+ * Regulatory limits refer to the maximum average txpower allowed by
+ * regulatory agencies in the geographies in which the device is meant
+ * to be operated. These limits are SKU-specific (i.e. geography-specific),
+ * and channel-specific; each channel has an individual regulatory limit
+ * listed in the EEPROM.
+ *
+ * Units are in half-dBm (i.e. "34" means 17 dBm).
+ */
+#define IL_TX_POWER_DEFAULT_REGULATORY_24 (34)
+#define IL_TX_POWER_DEFAULT_REGULATORY_52 (34)
+#define IL_TX_POWER_REGULATORY_MIN (0)
+#define IL_TX_POWER_REGULATORY_MAX (34)
+
+/**
+ * Sanity checks and default values for EEPROM saturation levels.
+ * If EEPROM values fall outside MIN/MAX range, use default values.
+ *
+ * Saturation is the highest level that the output power amplifier can produce
+ * without significant clipping distortion. This is a "peak" power level.
+ * Different types of modulation (i.e. various "rates", and OFDM vs. CCK)
+ * require differing amounts of backoff, relative to their average power output,
+ * in order to avoid clipping distortion.
+ *
+ * Driver must make sure that it is violating neither the saturation limit,
+ * nor the regulatory limit, when calculating Tx power settings for various
+ * rates.
+ *
+ * Units are in half-dBm (i.e. "38" means 19 dBm).
+ */
+#define IL_TX_POWER_DEFAULT_SATURATION_24 (38)
+#define IL_TX_POWER_DEFAULT_SATURATION_52 (38)
+#define IL_TX_POWER_SATURATION_MIN (20)
+#define IL_TX_POWER_SATURATION_MAX (50)
+
+/**
+ * Channel groups used for Tx Attenuation calibration (MIMO tx channel balance)
+ * and thermal Txpower calibration.
+ *
+ * When calculating txpower, driver must compensate for current device
+ * temperature; higher temperature requires higher gain. Driver must calculate
+ * current temperature (see "4965 temperature calculation"), then compare vs.
+ * factory calibration temperature in EEPROM; if current temperature is higher
+ * than factory temperature, driver must *increase* gain by proportions shown
+ * in table below. If current temperature is lower than factory, driver must
+ * *decrease* gain.
+ *
+ * Different frequency ranges require different compensation, as shown below.
+ */
+/* Group 0, 5.2 GHz ch 34-43: 4.5 degrees per 1/2 dB. */
+#define CALIB_IL_TX_ATTEN_GR1_FCH 34
+#define CALIB_IL_TX_ATTEN_GR1_LCH 43
+
+/* Group 1, 5.3 GHz ch 44-70: 4.0 degrees per 1/2 dB. */
+#define CALIB_IL_TX_ATTEN_GR2_FCH 44
+#define CALIB_IL_TX_ATTEN_GR2_LCH 70
+
+/* Group 2, 5.5 GHz ch 71-124: 4.0 degrees per 1/2 dB. */
+#define CALIB_IL_TX_ATTEN_GR3_FCH 71
+#define CALIB_IL_TX_ATTEN_GR3_LCH 124
+
+/* Group 3, 5.7 GHz ch 125-200: 4.0 degrees per 1/2 dB. */
+#define CALIB_IL_TX_ATTEN_GR4_FCH 125
+#define CALIB_IL_TX_ATTEN_GR4_LCH 200
+
+/* Group 4, 2.4 GHz all channels: 3.5 degrees per 1/2 dB. */
+#define CALIB_IL_TX_ATTEN_GR5_FCH 1
+#define CALIB_IL_TX_ATTEN_GR5_LCH 20
+
+enum {
+ CALIB_CH_GROUP_1 = 0,
+ CALIB_CH_GROUP_2 = 1,
+ CALIB_CH_GROUP_3 = 2,
+ CALIB_CH_GROUP_4 = 3,
+ CALIB_CH_GROUP_5 = 4,
+ CALIB_CH_GROUP_MAX
+};
+
+/********************* END TXPOWER *****************************************/
+
+/**
+ * Tx/Rx Queues
+ *
+ * Most communication between driver and 4965 is via queues of data buffers.
+ * For example, all commands that the driver issues to device's embedded
+ * controller (uCode) are via the command queue (one of the Tx queues). All
+ * uCode command responses/replies/notifications, including Rx frames, are
+ * conveyed from uCode to driver via the Rx queue.
+ *
+ * Most support for these queues, including handshake support, resides in
+ * structures in host DRAM, shared between the driver and the device. When
+ * allocating this memory, the driver must make sure that data written by
+ * the host CPU updates DRAM immediately (and does not get "stuck" in CPU's
+ * cache memory), so DRAM and cache are consistent, and the device can
+ * immediately see changes made by the driver.
+ *
+ * 4965 supports up to 16 DRAM-based Tx queues, and services these queues via
+ * up to 7 DMA channels (FIFOs). Each Tx queue is supported by a circular array
+ * in DRAM containing 256 Transmit Frame Descriptors (TFDs).
+ */
+#define IL49_NUM_FIFOS 7
+#define IL49_CMD_FIFO_NUM 4
+#define IL49_NUM_QUEUES 16
+#define IL49_NUM_AMPDU_QUEUES 8
+
+/**
+ * struct il4965_schedq_bc_tbl
+ *
+ * Byte Count table
+ *
+ * Each Tx queue uses a byte-count table containing 320 entries:
+ * one 16-bit entry for each of 256 TFDs, plus an additional 64 entries that
+ * duplicate the first 64 entries (to avoid wrap-around within a Tx win;
+ * max Tx win is 64 TFDs).
+ *
+ * When driver sets up a new TFD, it must also enter the total byte count
+ * of the frame to be transmitted into the corresponding entry in the byte
+ * count table for the chosen Tx queue. If the TFD idx is 0-63, the driver
+ * must duplicate the byte count entry in corresponding idx 256-319.
+ *
+ * padding puts each byte count table on a 1024-byte boundary;
+ * 4965 assumes tables are separated by 1024 bytes.
+ */
+struct il4965_scd_bc_tbl {
+ __le16 tfd_offset[TFD_QUEUE_BC_SIZE];
+ u8 pad[1024 - (TFD_QUEUE_BC_SIZE) * sizeof(__le16)];
+} __packed;
+
+#define IL4965_RTC_INST_LOWER_BOUND (0x000000)
+
+/* RSSI to dBm */
+#define IL4965_RSSI_OFFSET 44
+
+/* PCI registers */
+#define PCI_CFG_RETRY_TIMEOUT 0x041
+
+/* PCI register values */
+#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
+#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
+
+#define IL4965_DEFAULT_TX_RETRY 15
+
+/* EEPROM */
+#define IL4965_FIRST_AMPDU_QUEUE 10
+
+/* Calibration */
+void il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp);
+void il4965_sensitivity_calibration(struct il_priv *il, void *resp);
+void il4965_init_sensitivity(struct il_priv *il);
+void il4965_reset_run_time_calib(struct il_priv *il);
+void il4965_calib_free_results(struct il_priv *il);
+
+/* Debug */
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ssize_t il4965_ucode_rx_stats_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos);
+ssize_t il4965_ucode_tx_stats_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos);
+ssize_t il4965_ucode_general_stats_read(struct file *file,
+ char __user *user_buf, size_t count,
+ loff_t *ppos);
+#endif
+
+/****************************/
+/* Flow Handler Definitions */
+/****************************/
+
+/**
+ * This I/O area is directly read/writable by driver (e.g. Linux uses writel())
+ * Addresses are offsets from device's PCI hardware base address.
+ */
+#define FH49_MEM_LOWER_BOUND (0x1000)
+#define FH49_MEM_UPPER_BOUND (0x2000)
+
+/**
+ * Keep-Warm (KW) buffer base address.
+ *
+ * Driver must allocate a 4KByte buffer that is used by 4965 for keeping the
+ * host DRAM powered on (via dummy accesses to DRAM) to maintain low-latency
+ * DRAM access when 4965 is Txing or Rxing. The dummy accesses prevent host
+ * from going into a power-savings mode that would cause higher DRAM latency,
+ * and possible data over/under-runs, before all Tx/Rx is complete.
+ *
+ * Driver loads FH49_KW_MEM_ADDR_REG with the physical address (bits 35:4)
+ * of the buffer, which must be 4K aligned. Once this is set up, the 4965
+ * automatically invokes keep-warm accesses when normal accesses might not
+ * be sufficient to maintain fast DRAM response.
+ *
+ * Bit fields:
+ * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned
+ */
+#define FH49_KW_MEM_ADDR_REG (FH49_MEM_LOWER_BOUND + 0x97C)
+
+/**
+ * TFD Circular Buffers Base (CBBC) addresses
+ *
+ * 4965 has 16 base pointer registers, one for each of 16 host-DRAM-resident
+ * circular buffers (CBs/queues) containing Transmit Frame Descriptors (TFDs)
+ * (see struct il_tfd_frame). These 16 pointer registers are offset by 0x04
+ * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte
+ * aligned (address bits 0-7 must be 0).
+ *
+ * Bit fields in each pointer register:
+ * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned
+ */
+#define FH49_MEM_CBBC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0)
+#define FH49_MEM_CBBC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xA10)
+
+/* Find TFD CB base pointer for given queue (range 0-15). */
+#define FH49_MEM_CBBC_QUEUE(x) (FH49_MEM_CBBC_LOWER_BOUND + (x) * 0x4)
+
+/**
+ * Rx SRAM Control and Status Registers (RSCSR)
+ *
+ * These registers provide handshake between driver and 4965 for the Rx queue
+ * (this queue handles *all* command responses, notifications, Rx data, etc.
+ * sent from 4965 uCode to host driver). Unlike Tx, there is only one Rx
+ * queue, and only one Rx DMA/FIFO channel. Also unlike Tx, which can
+ * concatenate up to 20 DRAM buffers to form a Tx frame, each Receive Buffer
+ * Descriptor (RBD) points to only one Rx Buffer (RB); there is a 1:1
+ * mapping between RBDs and RBs.
+ *
+ * Driver must allocate host DRAM memory for the following, and set the
+ * physical address of each into 4965 registers:
+ *
+ * 1) Receive Buffer Descriptor (RBD) circular buffer (CB), typically with 256
+ * entries (although any power of 2, up to 4096, is selectable by driver).
+ * Each entry (1 dword) points to a receive buffer (RB) of consistent size
+ * (typically 4K, although 8K or 16K are also selectable by driver).
+ * Driver sets up RB size and number of RBDs in the CB via Rx config
+ * register FH49_MEM_RCSR_CHNL0_CONFIG_REG.
+ *
+ * Bit fields within one RBD:
+ * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned
+ *
+ * Driver sets physical address [35:8] of base of RBD circular buffer
+ * into FH49_RSCSR_CHNL0_RBDCB_BASE_REG [27:0].
+ *
+ * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers
+ * (RBs) have been filled, via a "write pointer", actually the idx of
+ * the RB's corresponding RBD within the circular buffer. Driver sets
+ * physical address [35:4] into FH49_RSCSR_CHNL0_STTS_WPTR_REG [31:0].
+ *
+ * Bit fields in lower dword of Rx status buffer (upper dword not used
+ * by driver; see struct il4965_shared, val0):
+ * 31-12: Not used by driver
+ * 11- 0: Index of last filled Rx buffer descriptor
+ * (4965 writes, driver reads this value)
+ *
+ * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must
+ * enter pointers to these RBs into contiguous RBD circular buffer entries,
+ * and update the 4965's "write" idx register,
+ * FH49_RSCSR_CHNL0_RBDCB_WPTR_REG.
+ *
+ * This "write" idx corresponds to the *next* RBD that the driver will make
+ * available, i.e. one RBD past the tail of the ready-to-fill RBDs within
+ * the circular buffer. This value should initially be 0 (before preparing any
+ * RBs), should be 8 after preparing the first 8 RBs (for example), and must
+ * wrap back to 0 at the end of the circular buffer (but don't wrap before
+ * "read" idx has advanced past 1! See below).
+ * NOTE: 4965 EXPECTS THE WRITE IDX TO BE INCREMENTED IN MULTIPLES OF 8.
+ *
+ * As the 4965 fills RBs (referenced from contiguous RBDs within the circular
+ * buffer), it updates the Rx status buffer in host DRAM, 2) described above,
+ * to tell the driver the idx of the latest filled RBD. The driver must
+ * read this "read" idx from DRAM after receiving an Rx interrupt from 4965.
+ *
+ * The driver must also internally keep track of a third idx, which is the
+ * next RBD to process. When receiving an Rx interrupt, driver should process
+ * all filled but unprocessed RBs up to, but not including, the RB
+ * corresponding to the "read" idx. For example, if "read" idx becomes "1",
+ * driver may process the RB pointed to by RBD 0. Depending on volume of
+ * traffic, there may be many RBs to process.
+ *
+ * If read idx == write idx, 4965 thinks there is no room to put new data.
+ * Due to this, the maximum number of filled RBs is 255, instead of 256. To
+ * be safe, make sure that there is a gap of at least 2 RBDs between "write"
+ * and "read" idxes; that is, make sure that there are no more than 254
+ * buffers waiting to be filled.
+ */
+#define FH49_MEM_RSCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xBC0)
+#define FH49_MEM_RSCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00)
+#define FH49_MEM_RSCSR_CHNL0 (FH49_MEM_RSCSR_LOWER_BOUND)
+
+/**
+ * Physical base address of 8-byte Rx Status buffer.
+ * Bit fields:
+ * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned.
+ */
+#define FH49_RSCSR_CHNL0_STTS_WPTR_REG (FH49_MEM_RSCSR_CHNL0)
+
+/**
+ * Physical base address of Rx Buffer Descriptor Circular Buffer.
+ * Bit fields:
+ * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned.
+ */
+#define FH49_RSCSR_CHNL0_RBDCB_BASE_REG (FH49_MEM_RSCSR_CHNL0 + 0x004)
+
+/**
+ * Rx write pointer (idx, really!).
+ * Bit fields:
+ * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1.
+ * NOTE: For 256-entry circular buffer, use only bits [7:0].
+ */
+#define FH49_RSCSR_CHNL0_RBDCB_WPTR_REG (FH49_MEM_RSCSR_CHNL0 + 0x008)
+#define FH49_RSCSR_CHNL0_WPTR (FH49_RSCSR_CHNL0_RBDCB_WPTR_REG)
+
+/**
+ * Rx Config/Status Registers (RCSR)
+ * Rx Config Reg for channel 0 (only channel used)
+ *
+ * Driver must initialize FH49_MEM_RCSR_CHNL0_CONFIG_REG as follows for
+ * normal operation (see bit fields).
+ *
+ * Clearing FH49_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA.
+ * Driver should poll FH49_MEM_RSSR_RX_STATUS_REG for
+ * FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing.
+ *
+ * Bit fields:
+ * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame,
+ * '10' operate normally
+ * 29-24: reserved
+ * 23-20: # RBDs in circular buffer = 2^value; use "8" for 256 RBDs (normal),
+ * min "5" for 32 RBDs, max "12" for 4096 RBDs.
+ * 19-18: reserved
+ * 17-16: size of each receive buffer; '00' 4K (normal), '01' 8K,
+ * '10' 12K, '11' 16K.
+ * 15-14: reserved
+ * 13-12: IRQ destination; '00' none, '01' host driver (normal operation)
+ * 11- 4: timeout for closing Rx buffer and interrupting host (units 32 usec)
+ * typical value 0x10 (about 1/2 msec)
+ * 3- 0: reserved
+ */
+#define FH49_MEM_RCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00)
+#define FH49_MEM_RCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xCC0)
+#define FH49_MEM_RCSR_CHNL0 (FH49_MEM_RCSR_LOWER_BOUND)
+
+#define FH49_MEM_RCSR_CHNL0_CONFIG_REG (FH49_MEM_RCSR_CHNL0)
+
+#define FH49_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */
+#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */
+#define FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */
+#define FH49_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */
+#define FH49_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
+#define FH49_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31 */
+
+#define FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20)
+#define FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4)
+#define RX_RB_TIMEOUT (0x10)
+
+#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000)
+#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000)
+#define FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000)
+
+#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000)
+#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000)
+#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000)
+#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000)
+
+#define FH49_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004)
+#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
+#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
+
+/**
+ * Rx Shared Status Registers (RSSR)
+ *
+ * After stopping Rx DMA channel (writing 0 to
+ * FH49_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll
+ * FH49_MEM_RSSR_RX_STATUS_REG until Rx channel is idle.
+ *
+ * Bit fields:
+ * 24: 1 = Channel 0 is idle
+ *
+ * FH49_MEM_RSSR_SHARED_CTRL_REG and FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV
+ * contain default values that should not be altered by the driver.
+ */
+#define FH49_MEM_RSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC40)
+#define FH49_MEM_RSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00)
+
+#define FH49_MEM_RSSR_SHARED_CTRL_REG (FH49_MEM_RSSR_LOWER_BOUND)
+#define FH49_MEM_RSSR_RX_STATUS_REG (FH49_MEM_RSSR_LOWER_BOUND + 0x004)
+#define FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\
+ (FH49_MEM_RSSR_LOWER_BOUND + 0x008)
+
+#define FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000)
+
+#define FH49_MEM_TFDIB_REG1_ADDR_BITSHIFT 28
+
+/* TFDB Area - TFDs buffer table */
+#define FH49_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF)
+#define FH49_TFDIB_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x900)
+#define FH49_TFDIB_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x958)
+#define FH49_TFDIB_CTRL0_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl))
+#define FH49_TFDIB_CTRL1_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4)
+
+/**
+ * Transmit DMA Channel Control/Status Registers (TCSR)
+ *
+ * 4965 has one configuration register for each of 8 Tx DMA/FIFO channels
+ * supported in hardware (don't confuse these with the 16 Tx queues in DRAM,
+ * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes.
+ *
+ * To use a Tx DMA channel, driver must initialize its
+ * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl) with:
+ *
+ * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
+ * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL
+ *
+ * All other bits should be 0.
+ *
+ * Bit fields:
+ * 31-30: Tx DMA channel enable: '00' off/pause, '01' pause at end of frame,
+ * '10' operate normally
+ * 29- 4: Reserved, set to "0"
+ * 3: Enable internal DMA requests (1, normal operation), disable (0)
+ * 2- 0: Reserved, set to "0"
+ */
+#define FH49_TCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00)
+#define FH49_TCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xE60)
+
+/* Find Control/Status reg for given Tx DMA/FIFO channel */
+#define FH49_TCSR_CHNL_NUM (7)
+#define FH50_TCSR_CHNL_NUM (8)
+
+/* TCSR: tx_config register values */
+#define FH49_TCSR_CHNL_TX_CONFIG_REG(_chnl) \
+ (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl))
+#define FH49_TCSR_CHNL_TX_CREDIT_REG(_chnl) \
+ (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4)
+#define FH49_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \
+ (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8)
+
+#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001)
+
+#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008)
+
+#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000)
+
+#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000)
+
+#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000)
+#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000)
+
+#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000)
+#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000)
+#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003)
+
+#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20)
+#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12)
+
+/**
+ * Tx Shared Status Registers (TSSR)
+ *
+ * After stopping Tx DMA channel (writing 0 to
+ * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll
+ * FH49_TSSR_TX_STATUS_REG until selected Tx channel is idle
+ * (channel's buffers empty | no pending requests).
+ *
+ * Bit fields:
+ * 31-24: 1 = Channel buffers empty (channel 7:0)
+ * 23-16: 1 = No pending requests (channel 7:0)
+ */
+#define FH49_TSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xEA0)
+#define FH49_TSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xEC0)
+
+#define FH49_TSSR_TX_STATUS_REG (FH49_TSSR_LOWER_BOUND + 0x010)
+
+/**
+ * Bit fields for TSSR(Tx Shared Status & Control) error status register:
+ * 31: Indicates an address error when accessed to internal memory
+ * uCode/driver must write "1" in order to clear this flag
+ * 30: Indicates that Host did not send the expected number of dwords to FH
+ * uCode/driver must write "1" in order to clear this flag
+ * 16-9:Each status bit is for one channel. Indicates that an (Error) ActDMA
+ * command was received from the scheduler while the TRB was already full
+ * with previous command
+ * uCode/driver must write "1" in order to clear this flag
+ * 7-0: Each status bit indicates a channel's TxCredit error. When an error
+ * bit is set, it indicates that the FH has received a full indication
+ * from the RTC TxFIFO and the current value of the TxCredit counter was
+ * not equal to zero. This mean that the credit mechanism was not
+ * synchronized to the TxFIFO status
+ * uCode/driver must write "1" in order to clear this flag
+ */
+#define FH49_TSSR_TX_ERROR_REG (FH49_TSSR_LOWER_BOUND + 0x018)
+
+#define FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16)
+
+/* Tx service channels */
+#define FH49_SRVC_CHNL (9)
+#define FH49_SRVC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9C8)
+#define FH49_SRVC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0)
+#define FH49_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \
+ (FH49_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4)
+
+#define FH49_TX_CHICKEN_BITS_REG (FH49_MEM_LOWER_BOUND + 0xE98)
+/* Instruct FH to increment the retry count of a packet when
+ * it is brought from the memory to TX-FIFO
+ */
+#define FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002)
+
+/* Keep Warm Size */
+#define IL_KW_SIZE 0x1000 /* 4k */
+
+#endif /* __il_4965_h__ */