summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-3945.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-3945.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-3945.c2290
1 files changed, 2290 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
new file mode 100644
index 000000000000..26f03a0b878d
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -0,0 +1,2290 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+#include <net/mac80211.h>
+
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+
+#include "iwlwifi.h"
+#include "iwl-helpers.h"
+#include "iwl-3945.h"
+#include "iwl-3945-rs.h"
+
+#define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
+ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
+ IWL_RATE_##r##M_IEEE, \
+ IWL_RATE_##ip##M_INDEX, \
+ IWL_RATE_##in##M_INDEX, \
+ IWL_RATE_##rp##M_INDEX, \
+ IWL_RATE_##rn##M_INDEX, \
+ IWL_RATE_##pp##M_INDEX, \
+ IWL_RATE_##np##M_INDEX }
+
+/*
+ * Parameter order:
+ * rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to IWL_RATE_INVALID
+ *
+ */
+const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
+ IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
+ IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
+ IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
+ IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
+ IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
+ IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
+ IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
+ IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
+ IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
+ IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
+ IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
+ IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
+};
+
+/* 1 = enable the iwl_disable_events() function */
+#define IWL_EVT_DISABLE (0)
+#define IWL_EVT_DISABLE_SIZE (1532/32)
+
+/**
+ * iwl_disable_events - Disable selected events in uCode event log
+ *
+ * Disable an event by writing "1"s into "disable"
+ * bitmap in SRAM. Bit position corresponds to Event # (id/type).
+ * Default values of 0 enable uCode events to be logged.
+ * Use for only special debugging. This function is just a placeholder as-is,
+ * you'll need to provide the special bits! ...
+ * ... and set IWL_EVT_DISABLE to 1. */
+void iwl_disable_events(struct iwl_priv *priv)
+{
+ int rc;
+ int i;
+ u32 base; /* SRAM address of event log header */
+ u32 disable_ptr; /* SRAM address of event-disable bitmap array */
+ u32 array_size; /* # of u32 entries in array */
+ u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
+ 0x00000000, /* 31 - 0 Event id numbers */
+ 0x00000000, /* 63 - 32 */
+ 0x00000000, /* 95 - 64 */
+ 0x00000000, /* 127 - 96 */
+ 0x00000000, /* 159 - 128 */
+ 0x00000000, /* 191 - 160 */
+ 0x00000000, /* 223 - 192 */
+ 0x00000000, /* 255 - 224 */
+ 0x00000000, /* 287 - 256 */
+ 0x00000000, /* 319 - 288 */
+ 0x00000000, /* 351 - 320 */
+ 0x00000000, /* 383 - 352 */
+ 0x00000000, /* 415 - 384 */
+ 0x00000000, /* 447 - 416 */
+ 0x00000000, /* 479 - 448 */
+ 0x00000000, /* 511 - 480 */
+ 0x00000000, /* 543 - 512 */
+ 0x00000000, /* 575 - 544 */
+ 0x00000000, /* 607 - 576 */
+ 0x00000000, /* 639 - 608 */
+ 0x00000000, /* 671 - 640 */
+ 0x00000000, /* 703 - 672 */
+ 0x00000000, /* 735 - 704 */
+ 0x00000000, /* 767 - 736 */
+ 0x00000000, /* 799 - 768 */
+ 0x00000000, /* 831 - 800 */
+ 0x00000000, /* 863 - 832 */
+ 0x00000000, /* 895 - 864 */
+ 0x00000000, /* 927 - 896 */
+ 0x00000000, /* 959 - 928 */
+ 0x00000000, /* 991 - 960 */
+ 0x00000000, /* 1023 - 992 */
+ 0x00000000, /* 1055 - 1024 */
+ 0x00000000, /* 1087 - 1056 */
+ 0x00000000, /* 1119 - 1088 */
+ 0x00000000, /* 1151 - 1120 */
+ 0x00000000, /* 1183 - 1152 */
+ 0x00000000, /* 1215 - 1184 */
+ 0x00000000, /* 1247 - 1216 */
+ 0x00000000, /* 1279 - 1248 */
+ 0x00000000, /* 1311 - 1280 */
+ 0x00000000, /* 1343 - 1312 */
+ 0x00000000, /* 1375 - 1344 */
+ 0x00000000, /* 1407 - 1376 */
+ 0x00000000, /* 1439 - 1408 */
+ 0x00000000, /* 1471 - 1440 */
+ 0x00000000, /* 1503 - 1472 */
+ };
+
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+ if (!iwl_hw_valid_rtc_data_addr(base)) {
+ IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
+ return;
+ }
+
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ IWL_WARNING("Can not read from adapter at this time.\n");
+ return;
+ }
+
+ disable_ptr = iwl_read_restricted_mem(priv, base + (4 * sizeof(u32)));
+ array_size = iwl_read_restricted_mem(priv, base + (5 * sizeof(u32)));
+ iwl_release_restricted_access(priv);
+
+ if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
+ IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n",
+ disable_ptr);
+ rc = iwl_grab_restricted_access(priv);
+ for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
+ iwl_write_restricted_mem(priv,
+ disable_ptr +
+ (i * sizeof(u32)),
+ evt_disable[i]);
+
+ iwl_release_restricted_access(priv);
+ } else {
+ IWL_DEBUG_INFO("Selected uCode log events may be disabled\n");
+ IWL_DEBUG_INFO(" by writing \"1\"s into disable bitmap\n");
+ IWL_DEBUG_INFO(" in SRAM at 0x%x, size %d u32s\n",
+ disable_ptr, array_size);
+ }
+
+}
+
+/**
+ * iwl3945_get_antenna_flags - Get antenna flags for RXON command
+ * @priv: eeprom and antenna fields are used to determine antenna flags
+ *
+ * priv->eeprom is used to determine if antenna AUX/MAIN are reversed
+ * priv->antenna specifies the antenna diversity mode:
+ *
+ * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself
+ * IWL_ANTENNA_MAIN - Force MAIN antenna
+ * IWL_ANTENNA_AUX - Force AUX antenna
+ */
+__le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv)
+{
+ switch (priv->antenna) {
+ case IWL_ANTENNA_DIVERSITY:
+ return 0;
+
+ case IWL_ANTENNA_MAIN:
+ if (priv->eeprom.antenna_switch_type)
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+
+ case IWL_ANTENNA_AUX:
+ if (priv->eeprom.antenna_switch_type)
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+ }
+
+ /* bad antenna selector value */
+ IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna);
+ return 0; /* "diversity" is default if error */
+}
+
+/*****************************************************************************
+ *
+ * Intel PRO/Wireless 3945ABG/BG Network Connection
+ *
+ * RX handler implementations
+ *
+ * Used by iwl-base.c
+ *
+ *****************************************************************************/
+
+void iwl_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+ IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
+ (int)sizeof(struct iwl_notif_statistics),
+ le32_to_cpu(pkt->len));
+
+ memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics));
+
+ priv->last_statistics_time = jiffies;
+}
+
+static void iwl3945_handle_data_packet(struct iwl_priv *priv, int is_data,
+ struct iwl_rx_mem_buffer *rxb,
+ struct ieee80211_rx_status *stats,
+ u16 phy_flags)
+{
+ struct ieee80211_hdr *hdr;
+ struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+ struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
+ struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt);
+ short len = le16_to_cpu(rx_hdr->len);
+
+ /* We received data from the HW, so stop the watchdog */
+ if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
+ IWL_DEBUG_DROP("Corruption detected!\n");
+ return;
+ }
+
+ /* We only process data packets if the interface is open */
+ if (unlikely(!priv->is_open)) {
+ IWL_DEBUG_DROP_LIMIT
+ ("Dropping packet while interface is not open.\n");
+ return;
+ }
+ if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+ if (iwl_param_hwcrypto)
+ iwl_set_decrypted_flag(priv, rxb->skb,
+ le32_to_cpu(rx_end->status),
+ stats);
+ iwl_handle_data_packet_monitor(priv, rxb, IWL_RX_DATA(pkt),
+ len, stats, phy_flags);
+ return;
+ }
+
+ skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
+ /* Set the size of the skb to the size of the frame */
+ skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
+
+ hdr = (void *)rxb->skb->data;
+
+ if (iwl_param_hwcrypto)
+ iwl_set_decrypted_flag(priv, rxb->skb,
+ le32_to_cpu(rx_end->status), stats);
+
+ ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
+ rxb->skb = NULL;
+}
+
+static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
+ struct iwl_rx_mem_buffer *rxb)
+{
+ struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+ struct iwl_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
+ struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
+ struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt);
+ struct ieee80211_hdr *header;
+ u16 phy_flags = le16_to_cpu(rx_hdr->phy_flags);
+ u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg);
+ u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff);
+ struct ieee80211_rx_status stats = {
+ .mactime = le64_to_cpu(rx_end->timestamp),
+ .freq = ieee80211chan2mhz(le16_to_cpu(rx_hdr->channel)),
+ .channel = le16_to_cpu(rx_hdr->channel),
+ .phymode = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+ MODE_IEEE80211G : MODE_IEEE80211A,
+ .antenna = 0,
+ .rate = rx_hdr->rate,
+ .flag = 0,
+ };
+ u8 network_packet;
+ int snr;
+
+ if ((unlikely(rx_stats->phy_count > 20))) {
+ IWL_DEBUG_DROP
+ ("dsp size out of range [0,20]: "
+ "%d/n", rx_stats->phy_count);
+ return;
+ }
+
+ if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
+ || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
+ return;
+ }
+
+ if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
+ iwl3945_handle_data_packet(priv, 1, rxb, &stats, phy_flags);
+ return;
+ }
+
+ /* Convert 3945's rssi indicator to dBm */
+ stats.ssi = rx_stats->rssi - IWL_RSSI_OFFSET;
+
+ /* Set default noise value to -127 */
+ if (priv->last_rx_noise == 0)
+ priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
+
+ /* 3945 provides noise info for OFDM frames only.
+ * sig_avg and noise_diff are measured by the 3945's digital signal
+ * processor (DSP), and indicate linear levels of signal level and
+ * distortion/noise within the packet preamble after
+ * automatic gain control (AGC). sig_avg should stay fairly
+ * constant if the radio's AGC is working well.
+ * Since these values are linear (not dB or dBm), linear
+ * signal-to-noise ratio (SNR) is (sig_avg / noise_diff).
+ * Convert linear SNR to dB SNR, then subtract that from rssi dBm
+ * to obtain noise level in dBm.
+ * Calculate stats.signal (quality indicator in %) based on SNR. */
+ if (rx_stats_noise_diff) {
+ snr = rx_stats_sig_avg / rx_stats_noise_diff;
+ stats.noise = stats.ssi - iwl_calc_db_from_ratio(snr);
+ stats.signal = iwl_calc_sig_qual(stats.ssi, stats.noise);
+
+ /* If noise info not available, calculate signal quality indicator (%)
+ * using just the dBm signal level. */
+ } else {
+ stats.noise = priv->last_rx_noise;
+ stats.signal = iwl_calc_sig_qual(stats.ssi, 0);
+ }
+
+
+ IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
+ stats.ssi, stats.noise, stats.signal,
+ rx_stats_sig_avg, rx_stats_noise_diff);
+
+ stats.freq = ieee80211chan2mhz(stats.channel);
+
+ /* can be covered by iwl_report_frame() in most cases */
+/* IWL_DEBUG_RX("RX status: 0x%08X\n", rx_end->status); */
+
+ header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
+
+ network_packet = iwl_is_network_packet(priv, header);
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_debug_level & IWL_DL_STATS && net_ratelimit())
+ IWL_DEBUG_STATS
+ ("[%c] %d RSSI: %d Signal: %u, Noise: %u, Rate: %u\n",
+ network_packet ? '*' : ' ',
+ stats.channel, stats.ssi, stats.ssi,
+ stats.ssi, stats.rate);
+
+ if (iwl_debug_level & (IWL_DL_RX))
+ /* Set "1" to report good data frames in groups of 100 */
+ iwl_report_frame(priv, pkt, header, 1);
+#endif
+
+ if (network_packet) {
+ priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp);
+ priv->last_tsf = le64_to_cpu(rx_end->timestamp);
+ priv->last_rx_rssi = stats.ssi;
+ priv->last_rx_noise = stats.noise;
+ }
+
+ switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) {
+ case IEEE80211_FTYPE_MGMT:
+ switch (le16_to_cpu(header->frame_control) &
+ IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_PROBE_RESP:
+ case IEEE80211_STYPE_BEACON:{
+ /* If this is a beacon or probe response for
+ * our network then cache the beacon
+ * timestamp */
+ if ((((priv->iw_mode == IEEE80211_IF_TYPE_STA)
+ && !compare_ether_addr(header->addr2,
+ priv->bssid)) ||
+ ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
+ && !compare_ether_addr(header->addr3,
+ priv->bssid)))) {
+ struct ieee80211_mgmt *mgmt =
+ (struct ieee80211_mgmt *)header;
+ __le32 *pos;
+ pos =
+ (__le32 *) & mgmt->u.beacon.
+ timestamp;
+ priv->timestamp0 = le32_to_cpu(pos[0]);
+ priv->timestamp1 = le32_to_cpu(pos[1]);
+ priv->beacon_int = le16_to_cpu(
+ mgmt->u.beacon.beacon_int);
+ if (priv->call_post_assoc_from_beacon &&
+ (priv->iw_mode ==
+ IEEE80211_IF_TYPE_STA))
+ queue_work(priv->workqueue,
+ &priv->post_associate.work);
+
+ priv->call_post_assoc_from_beacon = 0;
+ }
+
+ break;
+ }
+
+ case IEEE80211_STYPE_ACTION:
+ /* TODO: Parse 802.11h frames for CSA... */
+ break;
+
+ /*
+ * TODO: There is no callback function from upper
+ * stack to inform us when associated status. this
+ * work around to sniff assoc_resp management frame
+ * and finish the association process.
+ */
+ case IEEE80211_STYPE_ASSOC_RESP:
+ case IEEE80211_STYPE_REASSOC_RESP:{
+ struct ieee80211_mgmt *mgnt =
+ (struct ieee80211_mgmt *)header;
+ priv->assoc_id = (~((1 << 15) | (1 << 14)) &
+ le16_to_cpu(mgnt->u.
+ assoc_resp.aid));
+ priv->assoc_capability =
+ le16_to_cpu(mgnt->u.assoc_resp.capab_info);
+ if (priv->beacon_int)
+ queue_work(priv->workqueue,
+ &priv->post_associate.work);
+ else
+ priv->call_post_assoc_from_beacon = 1;
+ break;
+ }
+
+ case IEEE80211_STYPE_PROBE_REQ:{
+ if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
+ IWL_DEBUG_DROP
+ ("Dropping (non network): " MAC_FMT
+ ", " MAC_FMT ", " MAC_FMT "\n",
+ MAC_ARG(header->addr1),
+ MAC_ARG(header->addr2),
+ MAC_ARG(header->addr3));
+ return;
+ }
+ }
+
+ iwl3945_handle_data_packet(priv, 0, rxb, &stats, phy_flags);
+ break;
+
+ case IEEE80211_FTYPE_CTL:
+ break;
+
+ case IEEE80211_FTYPE_DATA:
+ if (unlikely(is_duplicate_packet(priv, header)))
+ IWL_DEBUG_DROP("Dropping (dup): " MAC_FMT ", "
+ MAC_FMT ", " MAC_FMT "\n",
+ MAC_ARG(header->addr1),
+ MAC_ARG(header->addr2),
+ MAC_ARG(header->addr3));
+ else
+ iwl3945_handle_data_packet(priv, 1, rxb, &stats,
+ phy_flags);
+ break;
+ }
+}
+
+int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr,
+ dma_addr_t addr, u16 len)
+{
+ int count;
+ u32 pad;
+ struct iwl_tfd_frame *tfd = (struct iwl_tfd_frame *)ptr;
+
+ count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
+ pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags));
+
+ if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
+ IWL_ERROR("Error can not send more than %d chunks\n",
+ NUM_TFD_CHUNKS);
+ return -EINVAL;
+ }
+
+ tfd->pa[count].addr = cpu_to_le32(addr);
+ tfd->pa[count].len = cpu_to_le32(len);
+
+ count++;
+
+ tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
+ TFD_CTL_PAD_SET(pad));
+
+ return 0;
+}
+
+/**
+ * iwl_hw_txq_free_tfd - Free one TFD, those at index [txq->q.last_used]
+ *
+ * Does NOT advance any indexes
+ */
+int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
+{
+ struct iwl_tfd_frame *bd_tmp = (struct iwl_tfd_frame *)&txq->bd[0];
+ struct iwl_tfd_frame *bd = &bd_tmp[txq->q.last_used];
+ struct pci_dev *dev = priv->pci_dev;
+ int i;
+ int counter;
+
+ /* classify bd */
+ if (txq->q.id == IWL_CMD_QUEUE_NUM)
+ /* nothing to cleanup after for host commands */
+ return 0;
+
+ /* sanity check */
+ counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags));
+ if (counter > NUM_TFD_CHUNKS) {
+ IWL_ERROR("Too many chunks: %i\n", counter);
+ /* @todo issue fatal error, it is quite serious situation */
+ return 0;
+ }
+
+ /* unmap chunks if any */
+
+ for (i = 1; i < counter; i++) {
+ pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr),
+ le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE);
+ if (txq->txb[txq->q.last_used].skb[0]) {
+ struct sk_buff *skb = txq->txb[txq->q.last_used].skb[0];
+ if (txq->txb[txq->q.last_used].skb[0]) {
+ /* Can be called from interrupt context */
+ dev_kfree_skb_any(skb);
+ txq->txb[txq->q.last_used].skb[0] = NULL;
+ }
+ }
+ }
+ return 0;
+}
+
+u8 iwl_hw_find_station(struct iwl_priv *priv, const u8 *addr)
+{
+ int i;
+ int ret = IWL_INVALID_STATION;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->sta_lock, flags);
+ for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++)
+ if ((priv->stations[i].used) &&
+ (!compare_ether_addr
+ (priv->stations[i].sta.sta.addr, addr))) {
+ ret = i;
+ goto out;
+ }
+
+ IWL_DEBUG_INFO("can not find STA " MAC_FMT " (total %d)\n",
+ MAC_ARG(addr), priv->num_stations);
+ out:
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return ret;
+}
+
+/**
+ * iwl_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
+ *
+*/
+void iwl_hw_build_tx_cmd_rate(struct iwl_priv *priv,
+ struct iwl_cmd *cmd,
+ struct ieee80211_tx_control *ctrl,
+ struct ieee80211_hdr *hdr, int sta_id, int tx_id)
+{
+ unsigned long flags;
+ u16 rate_index = min(ctrl->tx_rate & 0xffff, IWL_RATE_COUNT - 1);
+ u16 rate_mask;
+ int rate;
+ u8 rts_retry_limit;
+ u8 data_retry_limit;
+ __le32 tx_flags;
+ u16 fc = le16_to_cpu(hdr->frame_control);
+
+ rate = iwl_rates[rate_index].plcp;
+ tx_flags = cmd->cmd.tx.tx_flags;
+
+ /* We need to figure out how to get the sta->supp_rates while
+ * in this running context; perhaps encoding into ctrl->tx_rate? */
+ rate_mask = IWL_RATES_MASK;
+
+ spin_lock_irqsave(&priv->sta_lock, flags);
+
+ priv->stations[sta_id].current_rate.rate_n_flags = rate;
+
+ if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
+ (sta_id != IWL3945_BROADCAST_ID) &&
+ (sta_id != IWL_MULTICAST_ID))
+ priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate;
+
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+ if (tx_id >= IWL_CMD_QUEUE_NUM)
+ rts_retry_limit = 3;
+ else
+ rts_retry_limit = 7;
+
+ if (ieee80211_is_probe_response(fc)) {
+ data_retry_limit = 3;
+ if (data_retry_limit < rts_retry_limit)
+ rts_retry_limit = data_retry_limit;
+ } else
+ data_retry_limit = IWL_DEFAULT_TX_RETRY;
+
+ if (priv->data_retry_limit != -1)
+ data_retry_limit = priv->data_retry_limit;
+
+ if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
+ switch (fc & IEEE80211_FCTL_STYPE) {
+ case IEEE80211_STYPE_AUTH:
+ case IEEE80211_STYPE_DEAUTH:
+ case IEEE80211_STYPE_ASSOC_REQ:
+ case IEEE80211_STYPE_REASSOC_REQ:
+ if (tx_flags & TX_CMD_FLG_RTS_MSK) {
+ tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+ tx_flags |= TX_CMD_FLG_CTS_MSK;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+ cmd->cmd.tx.rts_retry_limit = rts_retry_limit;
+ cmd->cmd.tx.data_retry_limit = data_retry_limit;
+ cmd->cmd.tx.rate = rate;
+ cmd->cmd.tx.tx_flags = tx_flags;
+
+ /* OFDM */
+ cmd->cmd.tx.supp_rates[0] = rate_mask & IWL_OFDM_RATES_MASK;
+
+ /* CCK */
+ cmd->cmd.tx.supp_rates[1] = (rate_mask >> 8) & 0xF;
+
+ IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
+ "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
+ cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags),
+ cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]);
+}
+
+u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
+{
+ unsigned long flags_spin;
+ struct iwl_station_entry *station;
+
+ if (sta_id == IWL_INVALID_STATION)
+ return IWL_INVALID_STATION;
+
+ spin_lock_irqsave(&priv->sta_lock, flags_spin);
+ station = &priv->stations[sta_id];
+
+ station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
+ station->sta.rate_n_flags = cpu_to_le16(tx_rate);
+ station->current_rate.rate_n_flags = tx_rate;
+ station->sta.mode = STA_CONTROL_MODIFY_MSK;
+
+ spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+
+ iwl_send_add_station(priv, &station->sta, flags);
+ IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n",
+ sta_id, tx_rate);
+ return sta_id;
+}
+
+void iwl_hw_card_show_info(struct iwl_priv *priv)
+{
+ IWL_DEBUG_INFO("3945ABG HW Version %u.%u.%u\n",
+ ((priv->eeprom.board_revision >> 8) & 0x0F),
+ ((priv->eeprom.board_revision >> 8) >> 4),
+ (priv->eeprom.board_revision & 0x00FF));
+
+ IWL_DEBUG_INFO("3945ABG PBA Number %.*s\n",
+ (int)sizeof(priv->eeprom.board_pba_number),
+ priv->eeprom.board_pba_number);
+
+ IWL_DEBUG_INFO("EEPROM_ANTENNA_SWITCH_TYPE is 0x%02X\n",
+ priv->eeprom.antenna_switch_type);
+}
+
+static int iwl3945_nic_set_pwr_src(struct iwl_priv *priv, int pwr_max)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+
+ if (!pwr_max) {
+ u32 val;
+
+ rc = pci_read_config_dword(priv->pci_dev,
+ PCI_POWER_SOURCE, &val);
+ if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) {
+ iwl_set_bits_mask_restricted_reg(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+ iwl_release_restricted_access(priv);
+
+ iwl_poll_bit(priv, CSR_GPIO_IN,
+ CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
+ CSR_GPIO_IN_BIT_AUX_POWER, 5000);
+ } else
+ iwl_release_restricted_access(priv);
+ } else {
+ iwl_set_bits_mask_restricted_reg(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+
+ iwl_release_restricted_access(priv);
+ iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
+ CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return rc;
+}
+
+static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+
+ iwl_write_restricted(priv, FH_RCSR_RBD_BASE(0), rxq->dma_addr);
+ iwl_write_restricted(priv, FH_RCSR_RPTR_ADDR(0),
+ priv->hw_setting.shared_phys +
+ offsetof(struct iwl_shared, rx_read_ptr[0]));
+ iwl_write_restricted(priv, FH_RCSR_WPTR(0), 0);
+ iwl_write_restricted(priv, FH_RCSR_CONFIG(0),
+ ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
+ ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
+ ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
+ ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
+ (RX_QUEUE_SIZE_LOG << ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
+ ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
+ (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
+ ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
+
+ /* fake read to flush all prev I/O */
+ iwl_read_restricted(priv, FH_RSSR_CTRL);
+
+ iwl_release_restricted_access(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int iwl3945_tx_reset(struct iwl_priv *priv)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+
+ /* bypass mode */
+ iwl_write_restricted_reg(priv, SCD_MODE_REG, 0x2);
+
+ /* RA 0 is active */
+ iwl_write_restricted_reg(priv, SCD_ARASTAT_REG, 0x01);
+
+ /* all 6 fifo are active */
+ iwl_write_restricted_reg(priv, SCD_TXFACT_REG, 0x3f);
+
+ iwl_write_restricted_reg(priv, SCD_SBYP_MODE_1_REG, 0x010000);
+ iwl_write_restricted_reg(priv, SCD_SBYP_MODE_2_REG, 0x030002);
+ iwl_write_restricted_reg(priv, SCD_TXF4MF_REG, 0x000004);
+ iwl_write_restricted_reg(priv, SCD_TXF5MF_REG, 0x000005);
+
+ iwl_write_restricted(priv, FH_TSSR_CBB_BASE,
+ priv->hw_setting.shared_phys);
+
+ iwl_write_restricted(priv, FH_TSSR_MSG_CONFIG,
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
+ ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
+
+ iwl_release_restricted_access(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+/**
+ * iwl3945_txq_ctx_reset - Reset TX queue context
+ *
+ * Destroys all DMA structures and initialize them again
+ */
+static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
+{
+ int rc;
+ int txq_id, slots_num;
+
+ iwl_hw_txq_ctx_free(priv);
+
+ /* Tx CMD queue */
+ rc = iwl3945_tx_reset(priv);
+ if (rc)
+ goto error;
+
+ /* Tx queue(s) */
+ for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) {
+ slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
+ TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
+ rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
+ txq_id);
+ if (rc) {
+ IWL_ERROR("Tx %d queue init failed\n", txq_id);
+ goto error;
+ }
+ }
+
+ return rc;
+
+ error:
+ iwl_hw_txq_ctx_free(priv);
+ return rc;
+}
+
+int iwl_hw_nic_init(struct iwl_priv *priv)
+{
+ u8 rev_id;
+ int rc;
+ unsigned long flags;
+ struct iwl_rx_queue *rxq = &priv->rxq;
+
+ iwl_power_init_handle(priv);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl_set_bit(priv, CSR_ANA_PLL_CFG, (1 << 24));
+ iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
+ iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ rc = iwl_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+ if (rc < 0) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ IWL_DEBUG_INFO("Failed to init the card\n");
+ return rc;
+ }
+
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+ iwl_write_restricted_reg(priv, APMG_CLK_EN_REG,
+ APMG_CLK_VAL_DMA_CLK_RQT |
+ APMG_CLK_VAL_BSM_CLK_RQT);
+ udelay(20);
+ iwl_set_bits_restricted_reg(priv, APMG_PCIDEV_STT_REG,
+ APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+ iwl_release_restricted_access(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* Determine HW type */
+ rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
+ if (rc)
+ return rc;
+ IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id);
+
+ iwl3945_nic_set_pwr_src(priv, 1);
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
+ IWL_DEBUG_INFO("RTP type \n");
+ else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
+ IWL_DEBUG_INFO("ALM-MB type\n");
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MB);
+ } else {
+ IWL_DEBUG_INFO("ALM-MM type\n");
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MM);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* Initialize the EEPROM */
+ rc = iwl_eeprom_init(priv);
+ if (rc)
+ return rc;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) {
+ IWL_DEBUG_INFO("SKU OP mode is mrc\n");
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_SKU_MRC);
+ } else
+ IWL_DEBUG_INFO("SKU OP mode is basic\n");
+
+ if ((priv->eeprom.board_revision & 0xF0) == 0xD0) {
+ IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
+ priv->eeprom.board_revision);
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
+ } else {
+ IWL_DEBUG_INFO("3945ABG revision is 0x%X\n",
+ priv->eeprom.board_revision);
+ iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
+ }
+
+ if (priv->eeprom.almgor_m_version <= 1) {
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
+ IWL_DEBUG_INFO("Card M type A version is 0x%X\n",
+ priv->eeprom.almgor_m_version);
+ } else {
+ IWL_DEBUG_INFO("Card M type B version is 0x%X\n",
+ priv->eeprom.almgor_m_version);
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
+ IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
+
+ if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
+ IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ if (!rxq->bd) {
+ rc = iwl_rx_queue_alloc(priv);
+ if (rc) {
+ IWL_ERROR("Unable to initialize Rx queue\n");
+ return -ENOMEM;
+ }
+ } else
+ iwl_rx_queue_reset(priv, rxq);
+
+ iwl_rx_replenish(priv);
+
+ iwl3945_rx_init(priv, rxq);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Look at using this instead:
+ rxq->need_update = 1;
+ iwl_rx_queue_update_write_ptr(priv, rxq);
+ */
+
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+ iwl_write_restricted(priv, FH_RCSR_WPTR(0), rxq->write & ~7);
+ iwl_release_restricted_access(priv);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ rc = iwl3945_txq_ctx_reset(priv);
+ if (rc)
+ return rc;
+
+ set_bit(STATUS_INIT, &priv->status);
+
+ return 0;
+}
+
+/**
+ * iwl_hw_txq_ctx_free - Free TXQ Context
+ *
+ * Destroy all TX DMA queues and structures
+ */
+void iwl_hw_txq_ctx_free(struct iwl_priv *priv)
+{
+ int txq_id;
+
+ /* Tx queues */
+ for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++)
+ iwl_tx_queue_free(priv, &priv->txq[txq_id]);
+}
+
+void iwl_hw_txq_ctx_stop(struct iwl_priv *priv)
+{
+ int queue;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (iwl_grab_restricted_access(priv)) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ iwl_hw_txq_ctx_free(priv);
+ return;
+ }
+
+ /* stop SCD */
+ iwl_write_restricted_reg(priv, SCD_MODE_REG, 0);
+
+ /* reset TFD queues */
+ for (queue = TFD_QUEUE_MIN; queue < TFD_QUEUE_MAX; queue++) {
+ iwl_write_restricted(priv, FH_TCSR_CONFIG(queue), 0x0);
+ iwl_poll_restricted_bit(priv, FH_TSSR_TX_STATUS,
+ ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue),
+ 1000);
+ }
+
+ iwl_release_restricted_access(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ iwl_hw_txq_ctx_free(priv);
+}
+
+int iwl_hw_nic_stop_master(struct iwl_priv *priv)
+{
+ int rc = 0;
+ u32 reg_val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* set stop master bit */
+ iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
+
+ reg_val = iwl_read32(priv, CSR_GP_CNTRL);
+
+ if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE ==
+ (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE))
+ IWL_DEBUG_INFO("Card in power save, master is already "
+ "stopped\n");
+ else {
+ rc = iwl_poll_bit(priv, CSR_RESET,
+ CSR_RESET_REG_FLAG_MASTER_DISABLED,
+ CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
+ if (rc < 0) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ IWL_DEBUG_INFO("stop master\n");
+
+ return rc;
+}
+
+int iwl_hw_nic_reset(struct iwl_priv *priv)
+{
+ int rc;
+ unsigned long flags;
+
+ iwl_hw_nic_stop_master(priv);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+ rc = iwl_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+
+ rc = iwl_grab_restricted_access(priv);
+ if (!rc) {
+ iwl_write_restricted_reg(priv, APMG_CLK_CTRL_REG,
+ APMG_CLK_VAL_BSM_CLK_RQT);
+
+ udelay(10);
+
+ iwl_set_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+ iwl_write_restricted_reg(priv, APMG_RTC_INT_MSK_REG, 0x0);
+ iwl_write_restricted_reg(priv, APMG_RTC_INT_STT_REG,
+ 0xFFFFFFFF);
+
+ /* enable DMA */
+ iwl_write_restricted_reg(priv, APMG_CLK_EN_REG,
+ APMG_CLK_VAL_DMA_CLK_RQT |
+ APMG_CLK_VAL_BSM_CLK_RQT);
+ udelay(10);
+
+ iwl_set_bits_restricted_reg(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+ udelay(5);
+ iwl_clear_bits_restricted_reg(priv, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+ iwl_release_restricted_access(priv);
+ }
+
+ /* Clear the 'host command active' bit... */
+ clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
+
+ wake_up_interruptible(&priv->wait_command_queue);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return rc;
+}
+
+/**
+ * iwl_hw_reg_adjust_power_by_temp - return index delta into power gain settings table
+ */
+static int iwl_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
+{
+ return (new_reading - old_reading) * (-11) / 100;
+}
+
+/**
+ * iwl_hw_reg_temp_out_of_range - Keep temperature in sane range
+ */
+static inline int iwl_hw_reg_temp_out_of_range(int temperature)
+{
+ return (((temperature < -260) || (temperature > 25)) ? 1 : 0);
+}
+
+int iwl_hw_get_temperature(struct iwl_priv *priv)
+{
+ return iwl_read32(priv, CSR_UCODE_DRV_GP2);
+}
+
+/**
+ * iwl_hw_reg_txpower_get_temperature - get current temperature by reading from NIC
+ */
+static int iwl_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
+{
+ int temperature;
+
+ temperature = iwl_hw_get_temperature(priv);
+
+ /* driver's okay range is -260 to +25.
+ * human readable okay range is 0 to +285 */
+ IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
+
+ /* handle insane temp reading */
+ if (iwl_hw_reg_temp_out_of_range(temperature)) {
+ IWL_ERROR("Error bad temperature value %d\n", temperature);
+
+ /* if really really hot(?),
+ * substitute the 3rd band/group's temp measured at factory */
+ if (priv->last_temperature > 100)
+ temperature = priv->eeprom.groups[2].temperature;
+ else /* else use most recent "sane" value from driver */
+ temperature = priv->last_temperature;
+ }
+
+ return temperature; /* raw, not "human readable" */
+}
+
+/* Adjust Txpower only if temperature variance is greater than threshold.
+ *
+ * Both are lower than older versions' 9 degrees */
+#define IWL_TEMPERATURE_LIMIT_TIMER 6
+
+/**
+ * is_temp_calib_needed - determines if new calibration is needed
+ *
+ * records new temperature in tx_mgr->temperature.
+ * replaces tx_mgr->last_temperature *only* if calib needed
+ * (assumes caller will actually do the calibration!). */
+static int is_temp_calib_needed(struct iwl_priv *priv)
+{
+ int temp_diff;
+
+ priv->temperature = iwl_hw_reg_txpower_get_temperature(priv);
+ temp_diff = priv->temperature - priv->last_temperature;
+
+ /* get absolute value */
+ if (temp_diff < 0) {
+ IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff);
+ temp_diff = -temp_diff;
+ } else if (temp_diff == 0)
+ IWL_DEBUG_POWER("Same temp,\n");
+ else
+ IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff);
+
+ /* if we don't need calibration, *don't* update last_temperature */
+ if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
+ IWL_DEBUG_POWER("Timed thermal calib not needed\n");
+ return 0;
+ }
+
+ IWL_DEBUG_POWER("Timed thermal calib needed\n");
+
+ /* assume that caller will actually do calib ...
+ * update the "last temperature" value */
+ priv->last_temperature = priv->temperature;
+ return 1;
+}
+
+#define IWL_MAX_GAIN_ENTRIES 78
+#define IWL_CCK_FROM_OFDM_POWER_DIFF -5
+#define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
+
+/* radio and DSP power table, each step is 1/2 dB.
+ * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
+static struct iwl_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
+ {
+ {251, 127}, /* 2.4 GHz, highest power */
+ {251, 127},
+ {251, 127},
+ {251, 127},
+ {251, 125},
+ {251, 110},
+ {251, 105},
+ {251, 98},
+ {187, 125},
+ {187, 115},
+ {187, 108},
+ {187, 99},
+ {243, 119},
+ {243, 111},
+ {243, 105},
+ {243, 97},
+ {243, 92},
+ {211, 106},
+ {211, 100},
+ {179, 120},
+ {179, 113},
+ {179, 107},
+ {147, 125},
+ {147, 119},
+ {147, 112},
+ {147, 106},
+ {147, 101},
+ {147, 97},
+ {147, 91},
+ {115, 107},
+ {235, 121},
+ {235, 115},
+ {235, 109},
+ {203, 127},
+ {203, 121},
+ {203, 115},
+ {203, 108},
+ {203, 102},
+ {203, 96},
+ {203, 92},
+ {171, 110},
+ {171, 104},
+ {171, 98},
+ {139, 116},
+ {227, 125},
+ {227, 119},
+ {227, 113},
+ {227, 107},
+ {227, 101},
+ {227, 96},
+ {195, 113},
+ {195, 106},
+ {195, 102},
+ {195, 95},
+ {163, 113},
+ {163, 106},
+ {163, 102},
+ {163, 95},
+ {131, 113},
+ {131, 106},
+ {131, 102},
+ {131, 95},
+ {99, 113},
+ {99, 106},
+ {99, 102},
+ {99, 95},
+ {67, 113},
+ {67, 106},
+ {67, 102},
+ {67, 95},
+ {35, 113},
+ {35, 106},
+ {35, 102},
+ {35, 95},
+ {3, 113},
+ {3, 106},
+ {3, 102},
+ {3, 95} }, /* 2.4 GHz, lowest power */
+ {
+ {251, 127}, /* 5.x GHz, highest power */
+ {251, 120},
+ {251, 114},
+ {219, 119},
+ {219, 101},
+ {187, 113},
+ {187, 102},
+ {155, 114},
+ {155, 103},
+ {123, 117},
+ {123, 107},
+ {123, 99},
+ {123, 92},
+ {91, 108},
+ {59, 125},
+ {59, 118},
+ {59, 109},
+ {59, 102},
+ {59, 96},
+ {59, 90},
+ {27, 104},
+ {27, 98},
+ {27, 92},
+ {115, 118},
+ {115, 111},
+ {115, 104},
+ {83, 126},
+ {83, 121},
+ {83, 113},
+ {83, 105},
+ {83, 99},
+ {51, 118},
+ {51, 111},
+ {51, 104},
+ {51, 98},
+ {19, 116},
+ {19, 109},
+ {19, 102},
+ {19, 98},
+ {19, 93},
+ {171, 113},
+ {171, 107},
+ {171, 99},
+ {139, 120},
+ {139, 113},
+ {139, 107},
+ {139, 99},
+ {107, 120},
+ {107, 113},
+ {107, 107},
+ {107, 99},
+ {75, 120},
+ {75, 113},
+ {75, 107},
+ {75, 99},
+ {43, 120},
+ {43, 113},
+ {43, 107},
+ {43, 99},
+ {11, 120},
+ {11, 113},
+ {11, 107},
+ {11, 99},
+ {131, 107},
+ {131, 99},
+ {99, 120},
+ {99, 113},
+ {99, 107},
+ {99, 99},
+ {67, 120},
+ {67, 113},
+ {67, 107},
+ {67, 99},
+ {35, 120},
+ {35, 113},
+ {35, 107},
+ {35, 99},
+ {3, 120} } /* 5.x GHz, lowest power */
+};
+
+static inline u8 iwl_hw_reg_fix_power_index(int index)
+{
+ if (index < 0)
+ return 0;
+ if (index >= IWL_MAX_GAIN_ENTRIES)
+ return IWL_MAX_GAIN_ENTRIES - 1;
+ return (u8) index;
+}
+
+/* Kick off thermal recalibration check every 60 seconds */
+#define REG_RECALIB_PERIOD (60)
+
+/**
+ * iwl_hw_reg_set_scan_power - Set Tx power for scan probe requests
+ *
+ * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
+ * or 6 Mbit (OFDM) rates.
+ */
+static void iwl_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
+ s32 rate_index, const s8 *clip_pwrs,
+ struct iwl_channel_info *ch_info,
+ int band_index)
+{
+ struct iwl_scan_power_info *scan_power_info;
+ s8 power;
+ u8 power_index;
+
+ scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
+
+ /* use this channel group's 6Mbit clipping/saturation pwr,
+ * but cap at regulatory scan power restriction (set during init
+ * based on eeprom channel data) for this channel. */
+ power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX]);
+
+ /* further limit to user's max power preference.
+ * FIXME: Other spectrum management power limitations do not
+ * seem to apply?? */
+ power = min(power, priv->user_txpower_limit);
+ scan_power_info->requested_power = power;
+
+ /* find difference between new scan *power* and current "normal"
+ * Tx *power* for 6Mb. Use this difference (x2) to adjust the
+ * current "normal" temperature-compensated Tx power *index* for
+ * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
+ * *index*. */
+ power_index = ch_info->power_info[rate_index].power_table_index
+ - (power - ch_info->power_info
+ [IWL_RATE_6M_INDEX].requested_power) * 2;
+
+ /* store reference index that we use when adjusting *all* scan
+ * powers. So we can accommodate user (all channel) or spectrum
+ * management (single channel) power changes "between" temperature
+ * feedback compensation procedures.
+ * don't force fit this reference index into gain table; it may be a
+ * negative number. This will help avoid errors when we're at
+ * the lower bounds (highest gains, for warmest temperatures)
+ * of the table. */
+
+ /* don't exceed table bounds for "real" setting */
+ power_index = iwl_hw_reg_fix_power_index(power_index);
+
+ scan_power_info->power_table_index = power_index;
+ scan_power_info->tpc.tx_gain =
+ power_gain_table[band_index][power_index].tx_gain;
+ scan_power_info->tpc.dsp_atten =
+ power_gain_table[band_index][power_index].dsp_atten;
+}
+
+/**
+ * iwl_hw_reg_send_txpower - fill in Tx Power command with gain settings
+ *
+ * Configures power settings for all rates for the current channel,
+ * using values from channel info struct, and send to NIC
+ */
+int iwl_hw_reg_send_txpower(struct iwl_priv *priv)
+{
+ int rate_idx;
+ const struct iwl_channel_info *ch_info = NULL;
+ struct iwl_txpowertable_cmd txpower = {
+ .channel = priv->active_rxon.channel,
+ };
+
+ txpower.band = (priv->phymode == MODE_IEEE80211A) ? 0 : 1;
+ ch_info = iwl_get_channel_info(priv,
+ priv->phymode,
+ le16_to_cpu(priv->active_rxon.channel));
+ if (!ch_info) {
+ IWL_ERROR
+ ("Failed to get channel info for channel %d [%d]\n",
+ le16_to_cpu(priv->active_rxon.channel), priv->phymode);
+ return -EINVAL;
+ }
+
+ if (!is_channel_valid(ch_info)) {
+ IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on "
+ "non-Tx channel.\n");
+ return 0;
+ }
+
+ /* fill cmd with power settings for all rates for current channel */
+ for (rate_idx = 0; rate_idx < IWL_RATE_COUNT; rate_idx++) {
+ txpower.power[rate_idx].tpc = ch_info->power_info[rate_idx].tpc;
+ txpower.power[rate_idx].rate = iwl_rates[rate_idx].plcp;
+
+ IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+ le16_to_cpu(txpower.channel),
+ txpower.band,
+ txpower.power[rate_idx].tpc.tx_gain,
+ txpower.power[rate_idx].tpc.dsp_atten,
+ txpower.power[rate_idx].rate);
+ }
+
+ return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
+ sizeof(struct iwl_txpowertable_cmd), &txpower);
+
+}
+
+/**
+ * iwl_hw_reg_set_new_power - Configures power tables at new levels
+ * @ch_info: Channel to update. Uses power_info.requested_power.
+ *
+ * Replace requested_power and base_power_index ch_info fields for
+ * one channel.
+ *
+ * Called if user or spectrum management changes power preferences.
+ * Takes into account h/w and modulation limitations (clip power).
+ *
+ * This does *not* send anything to NIC, just sets up ch_info for one channel.
+ *
+ * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
+ * properly fill out the scan powers, and actual h/w gain settings,
+ * and send changes to NIC
+ */
+static int iwl_hw_reg_set_new_power(struct iwl_priv *priv,
+ struct iwl_channel_info *ch_info)
+{
+ struct iwl_channel_power_info *power_info;
+ int power_changed = 0;
+ int i;
+ const s8 *clip_pwrs;
+ int power;
+
+ /* Get this chnlgrp's rate-to-max/clip-powers table */
+ clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
+
+ /* Get this channel's rate-to-current-power settings table */
+ power_info = ch_info->power_info;
+
+ /* update OFDM Txpower settings */
+ for (i = IWL_FIRST_OFDM_RATE; i <= IWL_LAST_OFDM_RATE;
+ i++, ++power_info) {
+ int delta_idx;
+
+ /* limit new power to be no more than h/w capability */
+ power = min(ch_info->curr_txpow, clip_pwrs[i]);
+ if (power == power_info->requested_power)
+ continue;
+
+ /* find difference between old and new requested powers,
+ * update base (non-temp-compensated) power index */
+ delta_idx = (power - power_info->requested_power) * 2;
+ power_info->base_power_index -= delta_idx;
+
+ /* save new requested power value */
+ power_info->requested_power = power;
+
+ power_changed = 1;
+ }
+
+ /* update CCK Txpower settings, based on OFDM 12M setting ...
+ * ... all CCK power settings for a given channel are the *same*. */
+ if (power_changed) {
+ power =
+ ch_info->power_info[IWL_RATE_12M_INDEX].
+ requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
+
+ /* do all CCK rates' iwl_channel_power_info structures */
+ for (i = IWL_FIRST_CCK_RATE; i <= IWL_LAST_CCK_RATE; i++) {
+ power_info->requested_power = power;
+ power_info->base_power_index =
+ ch_info->power_info[IWL_RATE_12M_INDEX].
+ base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
+ ++power_info;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * iwl_hw_reg_get_ch_txpower_limit - returns new power limit for channel
+ *
+ * NOTE: Returned power limit may be less (but not more) than requested,
+ * based strictly on regulatory (eeprom and spectrum mgt) limitations
+ * (no consideration for h/w clipping limitations).
+ */
+static int iwl_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
+{
+ s8 max_power;
+
+#if 0
+ /* if we're using TGd limits, use lower of TGd or EEPROM */
+ if (ch_info->tgd_data.max_power != 0)
+ max_power = min(ch_info->tgd_data.max_power,
+ ch_info->eeprom.max_power_avg);
+
+ /* else just use EEPROM limits */
+ else
+#endif
+ max_power = ch_info->eeprom.max_power_avg;
+
+ return min(max_power, ch_info->max_power_avg);
+}
+
+/**
+ * iwl_hw_reg_comp_txpower_temp - Compensate for temperature
+ *
+ * Compensate txpower settings of *all* channels for temperature.
+ * This only accounts for the difference between current temperature
+ * and the factory calibration temperatures, and bases the new settings
+ * on the channel's base_power_index.
+ *
+ * If RxOn is "associated", this sends the new Txpower to NIC!
+ */
+static int iwl_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
+{
+ struct iwl_channel_info *ch_info = NULL;
+ int delta_index;
+ const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
+ u8 a_band;
+ u8 rate_index;
+ u8 scan_tbl_index;
+ u8 i;
+ int ref_temp;
+ int temperature = priv->temperature;
+
+ /* set up new Tx power info for each and every channel, 2.4 and 5.x */
+ for (i = 0; i < priv->channel_count; i++) {
+ ch_info = &priv->channel_info[i];
+ a_band = is_channel_a_band(ch_info);
+
+ /* Get this chnlgrp's factory calibration temperature */
+ ref_temp = (s16)priv->eeprom.groups[ch_info->group_index].
+ temperature;
+
+ /* get power index adjustment based on curr and factory
+ * temps */
+ delta_index = iwl_hw_reg_adjust_power_by_temp(temperature,
+ ref_temp);
+
+ /* set tx power value for all rates, OFDM and CCK */
+ for (rate_index = 0; rate_index < IWL_RATE_COUNT;
+ rate_index++) {
+ int power_idx =
+ ch_info->power_info[rate_index].base_power_index;
+
+ /* temperature compensate */
+ power_idx += delta_index;
+
+ /* stay within table range */
+ power_idx = iwl_hw_reg_fix_power_index(power_idx);
+ ch_info->power_info[rate_index].
+ power_table_index = (u8) power_idx;
+ ch_info->power_info[rate_index].tpc =
+ power_gain_table[a_band][power_idx];
+ }
+
+ /* Get this chnlgrp's rate-to-max/clip-powers table */
+ clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
+
+ /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
+ for (scan_tbl_index = 0;
+ scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
+ s32 actual_index = (scan_tbl_index == 0) ?
+ IWL_RATE_1M_INDEX : IWL_RATE_6M_INDEX;
+ iwl_hw_reg_set_scan_power(priv, scan_tbl_index,
+ actual_index, clip_pwrs,
+ ch_info, a_band);
+ }
+ }
+
+ /* send Txpower command for current channel to ucode */
+ return iwl_hw_reg_send_txpower(priv);
+}
+
+int iwl_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
+{
+ struct iwl_channel_info *ch_info;
+ s8 max_power;
+ u8 a_band;
+ u8 i;
+
+ if (priv->user_txpower_limit == power) {
+ IWL_DEBUG_POWER("Requested Tx power same as current "
+ "limit: %ddBm.\n", power);
+ return 0;
+ }
+
+ IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power);
+ priv->user_txpower_limit = power;
+
+ /* set up new Tx powers for each and every channel, 2.4 and 5.x */
+
+ for (i = 0; i < priv->channel_count; i++) {
+ ch_info = &priv->channel_info[i];
+ a_band = is_channel_a_band(ch_info);
+
+ /* find minimum power of all user and regulatory constraints
+ * (does not consider h/w clipping limitations) */
+ max_power = iwl_hw_reg_get_ch_txpower_limit(ch_info);
+ max_power = min(power, max_power);
+ if (max_power != ch_info->curr_txpow) {
+ ch_info->curr_txpow = max_power;
+
+ /* this considers the h/w clipping limitations */
+ iwl_hw_reg_set_new_power(priv, ch_info);
+ }
+ }
+
+ /* update txpower settings for all channels,
+ * send to NIC if associated. */
+ is_temp_calib_needed(priv);
+ iwl_hw_reg_comp_txpower_temp(priv);
+
+ return 0;
+}
+
+/* will add 3945 channel switch cmd handling later */
+int iwl_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+{
+ return 0;
+}
+
+/**
+ * iwl3945_reg_txpower_periodic - called when time to check our temperature.
+ *
+ * -- reset periodic timer
+ * -- see if temp has changed enough to warrant re-calibration ... if so:
+ * -- correct coeffs for temp (can reset temp timer)
+ * -- save this temp as "last",
+ * -- send new set of gain settings to NIC
+ * NOTE: This should continue working, even when we're not associated,
+ * so we can keep our internal table of scan powers current. */
+void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
+{
+ /* This will kick in the "brute force"
+ * iwl_hw_reg_comp_txpower_temp() below */
+ if (!is_temp_calib_needed(priv))
+ goto reschedule;
+
+ /* Set up a new set of temp-adjusted TxPowers, send to NIC.
+ * This is based *only* on current temperature,
+ * ignoring any previous power measurements */
+ iwl_hw_reg_comp_txpower_temp(priv);
+
+ reschedule:
+ queue_delayed_work(priv->workqueue,
+ &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ);
+}
+
+void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
+{
+ struct iwl_priv *priv = container_of(work, struct iwl_priv,
+ thermal_periodic.work);
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ mutex_lock(&priv->mutex);
+ iwl3945_reg_txpower_periodic(priv);
+ mutex_unlock(&priv->mutex);
+}
+
+/**
+ * iwl_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
+ * for the channel.
+ *
+ * This function is used when initializing channel-info structs.
+ *
+ * NOTE: These channel groups do *NOT* match the bands above!
+ * These channel groups are based on factory-tested channels;
+ * on A-band, EEPROM's "group frequency" entries represent the top
+ * channel in each group 1-4. Group 5 All B/G channels are in group 0.
+ */
+static u16 iwl_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
+ const struct iwl_channel_info *ch_info)
+{
+ struct iwl_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0];
+ u8 group;
+ u16 group_index = 0; /* based on factory calib frequencies */
+ u8 grp_channel;
+
+ /* Find the group index for the channel ... don't use index 1(?) */
+ if (is_channel_a_band(ch_info)) {
+ for (group = 1; group < 5; group++) {
+ grp_channel = ch_grp[group].group_channel;
+ if (ch_info->channel <= grp_channel) {
+ group_index = group;
+ break;
+ }
+ }
+ /* group 4 has a few channels *above* its factory cal freq */
+ if (group == 5)
+ group_index = 4;
+ } else
+ group_index = 0; /* 2.4 GHz, group 0 */
+
+ IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
+ group_index);
+ return group_index;
+}
+
+/**
+ * iwl_hw_reg_get_matched_power_index - Interpolate to get nominal index
+ *
+ * Interpolate to get nominal (i.e. at factory calibration temperature) index
+ * into radio/DSP gain settings table for requested power.
+ */
+static int iwl_hw_reg_get_matched_power_index(struct iwl_priv *priv,
+ s8 requested_power,
+ s32 setting_index, s32 *new_index)
+{
+ const struct iwl_eeprom_txpower_group *chnl_grp = NULL;
+ s32 index0, index1;
+ s32 power = 2 * requested_power;
+ s32 i;
+ const struct iwl_eeprom_txpower_sample *samples;
+ s32 gains0, gains1;
+ s32 res;
+ s32 denominator;
+
+ chnl_grp = &priv->eeprom.groups[setting_index];
+ samples = chnl_grp->samples;
+ for (i = 0; i < 5; i++) {
+ if (power == samples[i].power) {
+ *new_index = samples[i].gain_index;
+ return 0;
+ }
+ }
+
+ if (power > samples[1].power) {
+ index0 = 0;
+ index1 = 1;
+ } else if (power > samples[2].power) {
+ index0 = 1;
+ index1 = 2;
+ } else if (power > samples[3].power) {
+ index0 = 2;
+ index1 = 3;
+ } else {
+ index0 = 3;
+ index1 = 4;
+ }
+
+ denominator = (s32) samples[index1].power - (s32) samples[index0].power;
+ if (denominator == 0)
+ return -EINVAL;
+ gains0 = (s32) samples[index0].gain_index * (1 << 19);
+ gains1 = (s32) samples[index1].gain_index * (1 << 19);
+ res = gains0 + (gains1 - gains0) *
+ ((s32) power - (s32) samples[index0].power) / denominator +
+ (1 << 18);
+ *new_index = res >> 19;
+ return 0;
+}
+
+static void iwl_hw_reg_init_channel_groups(struct iwl_priv *priv)
+{
+ u32 i;
+ s32 rate_index;
+ const struct iwl_eeprom_txpower_group *group;
+
+ IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n");
+
+ for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
+ s8 *clip_pwrs; /* table of power levels for each rate */
+ s8 satur_pwr; /* saturation power for each chnl group */
+ group = &priv->eeprom.groups[i];
+
+ /* sanity check on factory saturation power value */
+ if (group->saturation_power < 40) {
+ IWL_WARNING("Error: saturation power is %d, "
+ "less than minimum expected 40\n",
+ group->saturation_power);
+ return;
+ }
+
+ /*
+ * Derive requested power levels for each rate, based on
+ * hardware capabilities (saturation power for band).
+ * Basic value is 3dB down from saturation, with further
+ * power reductions for highest 3 data rates. These
+ * backoffs provide headroom for high rate modulation
+ * power peaks, without too much distortion (clipping).
+ */
+ /* we'll fill in this array with h/w max power levels */
+ clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers;
+
+ /* divide factory saturation power by 2 to find -3dB level */
+ satur_pwr = (s8) (group->saturation_power >> 1);
+
+ /* fill in channel group's nominal powers for each rate */
+ for (rate_index = 0;
+ rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) {
+ switch (rate_index) {
+ case IWL_RATE_36M_INDEX:
+ if (i == 0) /* B/G */
+ *clip_pwrs = satur_pwr;
+ else /* A */
+ *clip_pwrs = satur_pwr - 5;
+ break;
+ case IWL_RATE_48M_INDEX:
+ if (i == 0)
+ *clip_pwrs = satur_pwr - 7;
+ else
+ *clip_pwrs = satur_pwr - 10;
+ break;
+ case IWL_RATE_54M_INDEX:
+ if (i == 0)
+ *clip_pwrs = satur_pwr - 9;
+ else
+ *clip_pwrs = satur_pwr - 12;
+ break;
+ default:
+ *clip_pwrs = satur_pwr;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
+ *
+ * Second pass (during init) to set up priv->channel_info
+ *
+ * Set up Tx-power settings in our channel info database for each VALID
+ * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
+ * and current temperature.
+ *
+ * Since this is based on current temperature (at init time), these values may
+ * not be valid for very long, but it gives us a starting/default point,
+ * and allows us to active (i.e. using Tx) scan.
+ *
+ * This does *not* write values to NIC, just sets up our internal table.
+ */
+int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
+{
+ struct iwl_channel_info *ch_info = NULL;
+ struct iwl_channel_power_info *pwr_info;
+ int delta_index;
+ u8 rate_index;
+ u8 scan_tbl_index;
+ const s8 *clip_pwrs; /* array of power levels for each rate */
+ u8 gain, dsp_atten;
+ s8 power;
+ u8 pwr_index, base_pwr_index, a_band;
+ u8 i;
+ int temperature;
+
+ /* save temperature reference,
+ * so we can determine next time to calibrate */
+ temperature = iwl_hw_reg_txpower_get_temperature(priv);
+ priv->last_temperature = temperature;
+
+ iwl_hw_reg_init_channel_groups(priv);
+
+ /* initialize Tx power info for each and every channel, 2.4 and 5.x */
+ for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
+ i++, ch_info++) {
+ a_band = is_channel_a_band(ch_info);
+ if (!is_channel_valid(ch_info))
+ continue;
+
+ /* find this channel's channel group (*not* "band") index */
+ ch_info->group_index =
+ iwl_hw_reg_get_ch_grp_index(priv, ch_info);
+
+ /* Get this chnlgrp's rate->max/clip-powers table */
+ clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers;
+
+ /* calculate power index *adjustment* value according to
+ * diff between current temperature and factory temperature */
+ delta_index = iwl_hw_reg_adjust_power_by_temp(temperature,
+ priv->eeprom.groups[ch_info->group_index].
+ temperature);
+
+ IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n",
+ ch_info->channel, delta_index, temperature +
+ IWL_TEMP_CONVERT);
+
+ /* set tx power value for all OFDM rates */
+ for (rate_index = 0; rate_index < IWL_OFDM_RATES;
+ rate_index++) {
+ s32 power_idx;
+ int rc;
+
+ /* use channel group's clip-power table,
+ * but don't exceed channel's max power */
+ s8 pwr = min(ch_info->max_power_avg,
+ clip_pwrs[rate_index]);
+
+ pwr_info = &ch_info->power_info[rate_index];
+
+ /* get base (i.e. at factory-measured temperature)
+ * power table index for this rate's power */
+ rc = iwl_hw_reg_get_matched_power_index(priv, pwr,
+ ch_info->group_index,
+ &power_idx);
+ if (rc) {
+ IWL_ERROR("Invalid power index\n");
+ return rc;
+ }
+ pwr_info->base_power_index = (u8) power_idx;
+
+ /* temperature compensate */
+ power_idx += delta_index;
+
+ /* stay within range of gain table */
+ power_idx = iwl_hw_reg_fix_power_index(power_idx);
+
+ /* fill 1 OFDM rate's iwl_channel_power_info struct */
+ pwr_info->requested_power = pwr;
+ pwr_info->power_table_index = (u8) power_idx;
+ pwr_info->tpc.tx_gain =
+ power_gain_table[a_band][power_idx].tx_gain;
+ pwr_info->tpc.dsp_atten =
+ power_gain_table[a_band][power_idx].dsp_atten;
+ }
+
+ /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
+ pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX];
+ power = pwr_info->requested_power +
+ IWL_CCK_FROM_OFDM_POWER_DIFF;
+ pwr_index = pwr_info->power_table_index +
+ IWL_CCK_FROM_OFDM_INDEX_DIFF;
+ base_pwr_index = pwr_info->base_power_index +
+ IWL_CCK_FROM_OFDM_INDEX_DIFF;
+
+ /* stay within table range */
+ pwr_index = iwl_hw_reg_fix_power_index(pwr_index);
+ gain = power_gain_table[a_band][pwr_index].tx_gain;
+ dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
+
+ /* fill each CCK rate's iwl_channel_power_info structure
+ * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
+ * NOTE: CCK rates start at end of OFDM rates! */
+ for (rate_index = IWL_OFDM_RATES;
+ rate_index < IWL_RATE_COUNT; rate_index++) {
+ pwr_info = &ch_info->power_info[rate_index];
+ pwr_info->requested_power = power;
+ pwr_info->power_table_index = pwr_index;
+ pwr_info->base_power_index = base_pwr_index;
+ pwr_info->tpc.tx_gain = gain;
+ pwr_info->tpc.dsp_atten = dsp_atten;
+ }
+
+ /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
+ for (scan_tbl_index = 0;
+ scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
+ s32 actual_index = (scan_tbl_index == 0) ?
+ IWL_RATE_1M_INDEX : IWL_RATE_6M_INDEX;
+ iwl_hw_reg_set_scan_power(priv, scan_tbl_index,
+ actual_index, clip_pwrs, ch_info, a_band);
+ }
+ }
+
+ return 0;
+}
+
+int iwl_hw_rxq_stop(struct iwl_priv *priv)
+{
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+
+ iwl_write_restricted(priv, FH_RCSR_CONFIG(0), 0);
+ rc = iwl_poll_restricted_bit(priv, FH_RSSR_STATUS, (1 << 24), 1000);
+ if (rc < 0)
+ IWL_ERROR("Can't stop Rx DMA.\n");
+
+ iwl_release_restricted_access(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+int iwl_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
+{
+ int rc;
+ unsigned long flags;
+ int txq_id = txq->q.id;
+
+ struct iwl_shared *shared_data = priv->hw_setting.shared_virt;
+
+ shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ rc = iwl_grab_restricted_access(priv);
+ if (rc) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return rc;
+ }
+ iwl_write_restricted(priv, FH_CBCC_CTRL(txq_id), 0);
+ iwl_write_restricted(priv, FH_CBCC_BASE(txq_id), 0);
+
+ iwl_write_restricted(priv, FH_TCSR_CONFIG(txq_id),
+ ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
+ ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
+ ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
+ ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
+ ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
+ iwl_release_restricted_access(priv);
+
+ /* fake read to flush all prev. writes */
+ iwl_read32(priv, FH_TSSR_CBB_BASE);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+int iwl_hw_get_rx_read(struct iwl_priv *priv)
+{
+ struct iwl_shared *shared_data = priv->hw_setting.shared_virt;
+
+ return le32_to_cpu(shared_data->rx_read_ptr[0]);
+}
+
+/**
+ * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
+ */
+int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
+{
+ int rc, i;
+ struct iwl_rate_scaling_cmd rate_cmd = {
+ .reserved = {0, 0, 0},
+ };
+ struct iwl_rate_scaling_info *table = rate_cmd.table;
+
+ for (i = 0; i < ARRAY_SIZE(iwl_rates); i++) {
+ table[i].rate_n_flags =
+ iwl_hw_set_rate_n_flags(iwl_rates[i].plcp, 0);
+ table[i].try_cnt = priv->retry_rate;
+ table[i].next_rate_index = iwl_get_prev_ieee_rate(i);
+ }
+
+ switch (priv->phymode) {
+ case MODE_IEEE80211A:
+ IWL_DEBUG_RATE("Select A mode rate scale\n");
+ /* If one of the following CCK rates is used,
+ * have it fall back to the 6M OFDM rate */
+ for (i = IWL_FIRST_CCK_RATE; i <= IWL_LAST_CCK_RATE; i++)
+ table[i].next_rate_index = IWL_FIRST_OFDM_RATE;
+
+ /* Don't fall back to CCK rates */
+ table[IWL_RATE_12M_INDEX].next_rate_index = IWL_RATE_9M_INDEX;
+
+ /* Don't drop out of OFDM rates */
+ table[IWL_FIRST_OFDM_RATE].next_rate_index =
+ IWL_FIRST_OFDM_RATE;
+ break;
+
+ case MODE_IEEE80211B:
+ IWL_DEBUG_RATE("Select B mode rate scale\n");
+ /* If an OFDM rate is used, have it fall back to the
+ * 1M CCK rates */
+ for (i = IWL_FIRST_OFDM_RATE; i <= IWL_LAST_OFDM_RATE; i++)
+ table[i].next_rate_index = IWL_FIRST_CCK_RATE;
+
+ /* CCK shouldn't fall back to OFDM... */
+ table[IWL_RATE_11M_INDEX].next_rate_index = IWL_RATE_5M_INDEX;
+ break;
+
+ default:
+ IWL_DEBUG_RATE("Select G mode rate scale\n");
+ break;
+ }
+
+ /* Update the rate scaling for control frame Tx */
+ rate_cmd.table_id = 0;
+ rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
+ &rate_cmd);
+ if (rc)
+ return rc;
+
+ /* Update the rate scaling for data frame Tx */
+ rate_cmd.table_id = 1;
+ return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
+ &rate_cmd);
+}
+
+int iwl_hw_set_hw_setting(struct iwl_priv *priv)
+{
+ memset((void *)&priv->hw_setting, 0,
+ sizeof(struct iwl_driver_hw_info));
+
+ priv->hw_setting.shared_virt =
+ pci_alloc_consistent(priv->pci_dev,
+ sizeof(struct iwl_shared),
+ &priv->hw_setting.shared_phys);
+
+ if (!priv->hw_setting.shared_virt) {
+ IWL_ERROR("failed to allocate pci memory\n");
+ mutex_unlock(&priv->mutex);
+ return -ENOMEM;
+ }
+
+ priv->hw_setting.ac_queue_count = AC_NUM;
+ priv->hw_setting.rx_buffer_size = IWL_RX_BUF_SIZE;
+ priv->hw_setting.tx_cmd_len = sizeof(struct iwl_tx_cmd);
+ priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE;
+ priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG;
+ priv->hw_setting.cck_flag = 0;
+ priv->hw_setting.max_stations = IWL3945_STATION_COUNT;
+ priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID;
+ return 0;
+}
+
+unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
+ struct iwl_frame *frame, u8 rate)
+{
+ struct iwl_tx_beacon_cmd *tx_beacon_cmd;
+ unsigned int frame_size;
+
+ tx_beacon_cmd = (struct iwl_tx_beacon_cmd *)&frame->u;
+ memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+ tx_beacon_cmd->tx.sta_id = IWL3945_BROADCAST_ID;
+ tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ frame_size = iwl_fill_beacon_frame(priv,
+ tx_beacon_cmd->frame,
+ BROADCAST_ADDR,
+ sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+
+ BUG_ON(frame_size > MAX_MPDU_SIZE);
+ tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+
+ tx_beacon_cmd->tx.rate = rate;
+ tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
+ TX_CMD_FLG_TSF_MSK);
+
+ /* supp_rates[0] == OFDM */
+ tx_beacon_cmd->tx.supp_rates[0] = IWL_OFDM_BASIC_RATES_MASK;
+
+ /* supp_rates[1] == CCK
+ *
+ * NOTE: IWL_*_RATES_MASK are not in the order that supp_rates
+ * expects so we have to shift them around.
+ *
+ * supp_rates expects:
+ * CCK rates are bit0..3
+ *
+ * However IWL_*_RATES_MASK has:
+ * CCK rates are bit8..11
+ */
+ tx_beacon_cmd->tx.supp_rates[1] =
+ (IWL_CCK_BASIC_RATES_MASK >> 8) & 0xF;
+
+ return (sizeof(struct iwl_tx_beacon_cmd) + frame_size);
+}
+
+void iwl_hw_rx_handler_setup(struct iwl_priv *priv)
+{
+ priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
+}
+
+void iwl_hw_setup_deferred_work(struct iwl_priv *priv)
+{
+ INIT_DELAYED_WORK(&priv->thermal_periodic,
+ iwl3945_bg_reg_txpower_periodic);
+}
+
+void iwl_hw_cancel_deferred_work(struct iwl_priv *priv)
+{
+ cancel_delayed_work(&priv->thermal_periodic);
+}
+
+struct pci_device_id iwl_hw_card_ids[] = {
+ {0x8086, 0x4222, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0x8086, 0x4227, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {0}
+};
+
+inline int iwl_eeprom_aqcuire_semaphore(struct iwl_priv *priv)
+{
+ _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
+ return 0;
+}
+
+MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);