diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800pci.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800pci.c | 65 |
1 files changed, 33 insertions, 32 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index b26739535986..433c7f3ef837 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -84,20 +84,22 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } -#ifdef CONFIG_RT2800PCI_SOC +#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { - u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */ + void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); + + iounmap(base_addr); } #else static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { } -#endif /* CONFIG_RT2800PCI_SOC */ +#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */ -#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_PCI static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { struct rt2x00_dev *rt2x00dev = eeprom->data; @@ -181,7 +183,7 @@ static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { } -#endif /* CONFIG_RT2800PCI_PCI */ +#endif /* CONFIG_PCI */ /* * Firmware functions @@ -328,8 +330,7 @@ static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, - (state == STATE_RADIO_RX_ON) || - (state == STATE_RADIO_RX_ON_LINK)); + (state == STATE_RADIO_RX_ON)); rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); } @@ -442,7 +443,7 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, * if the device is booting and wasn't asleep it will return * failure when attempting to wakeup. */ - rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2); + rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2); if (state == STATE_AWAKE) { rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0); @@ -477,9 +478,7 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, rt2800pci_set_state(rt2x00dev, STATE_SLEEP); break; case STATE_RADIO_RX_ON: - case STATE_RADIO_RX_ON_LINK: case STATE_RADIO_RX_OFF: - case STATE_RADIO_RX_OFF_LINK: rt2800pci_toggle_rx(rt2x00dev, state); break; case STATE_RADIO_IRQ_ON: @@ -777,7 +776,7 @@ static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev) * Since we have only one producer and one consumer we don't * need to lock the kfifo. */ - for (i = 0; i < TX_ENTRIES; i++) { + for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) { rt2800_register_read(rt2x00dev, TX_STA_FIFO, &status); if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID)) @@ -943,6 +942,7 @@ static const struct ieee80211_ops rt2800pci_mac80211_ops = { .get_tsf = rt2800_get_tsf, .rfkill_poll = rt2x00mac_rfkill_poll, .ampdu_action = rt2800_ampdu_action, + .flush = rt2x00mac_flush, }; static const struct rt2800_ops rt2800pci_rt2800_ops = { @@ -991,21 +991,21 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { }; static const struct data_queue_desc rt2800pci_queue_rx = { - .entry_num = RX_ENTRIES, + .entry_num = 128, .data_size = AGGREGATION_SIZE, .desc_size = RXD_DESC_SIZE, .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2800pci_queue_tx = { - .entry_num = TX_ENTRIES, + .entry_num = 64, .data_size = AGGREGATION_SIZE, .desc_size = TXD_DESC_SIZE, .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2800pci_queue_bcn = { - .entry_num = 8 * BEACON_ENTRIES, + .entry_num = 8, .data_size = 0, /* No DMA required for beacons */ .desc_size = TXWI_DESC_SIZE, .priv_size = sizeof(struct queue_entry_priv_pci), @@ -1033,12 +1033,15 @@ static const struct rt2x00_ops rt2800pci_ops = { /* * RT2800pci module information. */ -#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_PCI static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) }, @@ -1046,12 +1049,10 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) }, - { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, -#ifdef CONFIG_RT2800PCI_RT30XX - { PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) }, - { PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) }, - { PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) }, { PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, +#ifdef CONFIG_RT2800PCI_RT33XX + { PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) }, #endif #ifdef CONFIG_RT2800PCI_RT35XX { PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) }, @@ -1062,19 +1063,19 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { #endif { 0, } }; -#endif /* CONFIG_RT2800PCI_PCI */ +#endif /* CONFIG_PCI */ MODULE_AUTHOR(DRV_PROJECT); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); -#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_PCI MODULE_FIRMWARE(FIRMWARE_RT2860); MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); -#endif /* CONFIG_RT2800PCI_PCI */ +#endif /* CONFIG_PCI */ MODULE_LICENSE("GPL"); -#ifdef CONFIG_RT2800PCI_SOC +#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) static int rt2800soc_probe(struct platform_device *pdev) { return rt2x00soc_probe(pdev, &rt2800pci_ops); @@ -1091,9 +1092,9 @@ static struct platform_driver rt2800soc_driver = { .suspend = rt2x00soc_suspend, .resume = rt2x00soc_resume, }; -#endif /* CONFIG_RT2800PCI_SOC */ +#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */ -#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_PCI static struct pci_driver rt2800pci_driver = { .name = KBUILD_MODNAME, .id_table = rt2800pci_device_table, @@ -1102,21 +1103,21 @@ static struct pci_driver rt2800pci_driver = { .suspend = rt2x00pci_suspend, .resume = rt2x00pci_resume, }; -#endif /* CONFIG_RT2800PCI_PCI */ +#endif /* CONFIG_PCI */ static int __init rt2800pci_init(void) { int ret = 0; -#ifdef CONFIG_RT2800PCI_SOC +#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) ret = platform_driver_register(&rt2800soc_driver); if (ret) return ret; #endif -#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_PCI ret = pci_register_driver(&rt2800pci_driver); if (ret) { -#ifdef CONFIG_RT2800PCI_SOC +#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) platform_driver_unregister(&rt2800soc_driver); #endif return ret; @@ -1128,10 +1129,10 @@ static int __init rt2800pci_init(void) static void __exit rt2800pci_exit(void) { -#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_PCI pci_unregister_driver(&rt2800pci_driver); #endif -#ifdef CONFIG_RT2800PCI_SOC +#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) platform_driver_unregister(&rt2800soc_driver); #endif } |