diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00.h | 133 |
1 files changed, 54 insertions, 79 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 86e4624a63ea..7b67f9666c3b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -27,7 +27,6 @@ #define RT2X00_H #include <linux/bitops.h> -#include <linux/prefetch.h> #include <linux/skbuff.h> #include <linux/workqueue.h> #include <linux/firmware.h> @@ -38,7 +37,7 @@ #include "rt2x00debug.h" #include "rt2x00reg.h" -#include "rt2x00ring.h" +#include "rt2x00queue.h" /* * Module information. @@ -91,26 +90,6 @@ DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args) /* - * Ring sizes. - * Ralink PCI devices demand the Frame size to be a multiple of 128 bytes. - * DATA_FRAME_SIZE is used for TX, RX, ATIM and PRIO rings. - * MGMT_FRAME_SIZE is used for the BEACON ring. - */ -#define DATA_FRAME_SIZE 2432 -#define MGMT_FRAME_SIZE 256 - -/* - * Number of entries in a packet ring. - * PCI devices only need 1 Beacon entry, - * but USB devices require a second because they - * have to send a Guardian byte first. - */ -#define RX_ENTRIES 12 -#define TX_ENTRIES 12 -#define ATIM_ENTRIES 1 -#define BEACON_ENTRIES 2 - -/* * Standard timing and size defines. * These values should follow the ieee80211 specifications. */ @@ -474,12 +453,12 @@ struct rt2x00lib_ops { void (*uninitialize) (struct rt2x00_dev *rt2x00dev); /* - * Ring initialization handlers + * queue initialization handlers */ void (*init_rxentry) (struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); void (*init_txentry) (struct rt2x00_dev *rt2x00dev, - struct data_entry *entry); + struct queue_entry *entry); /* * Radio control handlers. @@ -497,10 +476,10 @@ struct rt2x00lib_ops { */ void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txdata_entry_desc *desc, + struct txentry_desc *txdesc, struct ieee80211_tx_control *control); int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, - struct data_ring *ring, struct sk_buff *skb, + struct data_queue *queue, struct sk_buff *skb, struct ieee80211_tx_control *control); int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); @@ -510,8 +489,8 @@ struct rt2x00lib_ops { /* * RX control handlers */ - void (*fill_rxdone) (struct data_entry *entry, - struct rxdata_entry_desc *desc); + void (*fill_rxdone) (struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc); /* * Configuration handlers. @@ -540,10 +519,12 @@ struct rt2x00lib_ops { */ struct rt2x00_ops { const char *name; - const unsigned int rxd_size; - const unsigned int txd_size; const unsigned int eeprom_size; const unsigned int rf_size; + const struct data_queue_desc *rx; + const struct data_queue_desc *tx; + const struct data_queue_desc *bcn; + const struct data_queue_desc *atim; const struct rt2x00lib_ops *lib; const struct ieee80211_ops *hw; #ifdef CONFIG_RT2X00_LIB_DEBUGFS @@ -570,7 +551,8 @@ enum rt2x00_flags { * Driver features */ DRIVER_REQUIRE_FIRMWARE, - DRIVER_REQUIRE_BEACON_RING, + DRIVER_REQUIRE_BEACON_GUARD, + DRIVER_REQUIRE_ATIM_QUEUE, /* * Driver configuration @@ -597,8 +579,10 @@ struct rt2x00_dev { * macro's should be used for correct typecasting. */ void *dev; -#define rt2x00dev_pci(__dev) ( (struct pci_dev*)(__dev)->dev ) -#define rt2x00dev_usb(__dev) ( (struct usb_interface*)(__dev)->dev ) +#define rt2x00dev_pci(__dev) ( (struct pci_dev *)(__dev)->dev ) +#define rt2x00dev_usb(__dev) ( (struct usb_interface *)(__dev)->dev ) +#define rt2x00dev_usb_dev(__dev)\ + ( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) ) /* * Callback functions. @@ -757,14 +741,14 @@ struct rt2x00_dev { struct work_struct config_work; /* - * Data ring arrays for RX, TX and Beacon. - * The Beacon array also contains the Atim ring + * Data queue arrays for RX, TX and Beacon. + * The Beacon array also contains the Atim queue * if that is supported by the device. */ - int data_rings; - struct data_ring *rx; - struct data_ring *tx; - struct data_ring *bcn; + int data_queues; + struct data_queue *rx; + struct data_queue *tx; + struct data_queue *bcn; /* * Firmware image. @@ -773,37 +757,6 @@ struct rt2x00_dev { }; /* - * For-each loop for the ring array. - * All rings have been allocated as a single array, - * this means we can create a very simply loop macro - * that is capable of looping through all rings. - * ring_end(), txring_end() and ring_loop() are helper macro's which - * should not be used directly. Instead the following should be used: - * ring_for_each() - Loops through all rings (RX, TX, Beacon & Atim) - * txring_for_each() - Loops through TX data rings (TX only) - * txringall_for_each() - Loops through all TX rings (TX, Beacon & Atim) - */ -#define ring_end(__dev) \ - &(__dev)->rx[(__dev)->data_rings] - -#define txring_end(__dev) \ - &(__dev)->tx[(__dev)->hw->queues] - -#define ring_loop(__entry, __start, __end) \ - for ((__entry) = (__start); \ - prefetch(&(__entry)[1]), (__entry) != (__end); \ - (__entry) = &(__entry)[1]) - -#define ring_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->rx, ring_end(__dev)) - -#define txring_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->tx, txring_end(__dev)) - -#define txringall_for_each(__dev, __entry) \ - ring_loop(__entry, (__dev)->tx, ring_end(__dev)) - -/* * Generic RF access. * The RF is being accessed by word index. */ @@ -895,20 +848,42 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) return ((size * 8 * 10) % rate); } -/* - * Library functions. +/** + * rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: mac80211 queue index (see &enum ieee80211_tx_queue). */ -struct data_ring *rt2x00lib_get_ring(struct rt2x00_dev *rt2x00dev, - const unsigned int queue); +struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, + const enum ieee80211_tx_queue queue); + +/** + * rt2x00queue_get_entry - Get queue entry where the given index points to. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @index: Index identifier for obtaining the correct index. + */ +struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, + enum queue_index index); + +/** + * rt2x00queue_index_inc - Index incrementation function + * @queue: Queue (&struct data_queue) to perform the action on. + * @action: Index type (&enum queue_index) to perform the action on. + * + * This function will increase the requested index on the queue, + * it will grab the appropriate locks and handle queue overflow events by + * resetting the index to the start of the queue. + */ +void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); + /* * Interrupt context handlers. */ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); -void rt2x00lib_txdone(struct data_entry *entry, - const int status, const int retry); -void rt2x00lib_rxdone(struct data_entry *entry, struct sk_buff *skb, - struct rxdata_entry_desc *desc); +void rt2x00lib_txdone(struct queue_entry *entry, + struct txdone_entry_desc *txdesc); +void rt2x00lib_rxdone(struct queue_entry *entry, + struct rxdone_entry_desc *rxdesc); /* * TX descriptor initializer |