diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00queue.h')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00queue.h | 68 |
1 files changed, 57 insertions, 11 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index f79170849add..d81d85f34866 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -213,9 +213,16 @@ struct rxdone_entry_desc { /** * enum txdone_entry_desc_flags: Flags for &struct txdone_entry_desc * + * Every txdone report has to contain the basic result of the + * transmission, either &TXDONE_UNKNOWN, &TXDONE_SUCCESS or + * &TXDONE_FAILURE. The flag &TXDONE_FALLBACK can be used in + * conjunction with all of these flags but should only be set + * if retires > 0. The flag &TXDONE_EXCESSIVE_RETRY can only be used + * in conjunction with &TXDONE_FAILURE. + * * @TXDONE_UNKNOWN: Hardware could not determine success of transmission. * @TXDONE_SUCCESS: Frame was successfully send - * @TXDONE_FALLBACK: Frame was successfully send using a fallback rate. + * @TXDONE_FALLBACK: Hardware used fallback rates for retries * @TXDONE_FAILURE: Frame was not successfully send * @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the * frame transmission failed due to excessive retries. @@ -261,6 +268,7 @@ struct txdone_entry_desc { * @ENTRY_TXD_HT_AMPDU: This frame is part of an AMPDU. * @ENTRY_TXD_HT_BW_40: Use 40MHz Bandwidth. * @ENTRY_TXD_HT_SHORT_GI: Use short GI. + * @ENTRY_TXD_HT_MIMO_PS: The receiving STA is in dynamic SM PS mode. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, @@ -279,6 +287,7 @@ enum txentry_desc_flags { ENTRY_TXD_HT_AMPDU, ENTRY_TXD_HT_BW_40, ENTRY_TXD_HT_SHORT_GI, + ENTRY_TXD_HT_MIMO_PS, }; /** @@ -287,7 +296,7 @@ enum txentry_desc_flags { * Summary of information for the frame descriptor before sending a TX frame. * * @flags: Descriptor flags (See &enum queue_entry_flags). - * @queue: Queue identification (See &enum data_queue_qid). + * @qid: Queue identification (See &enum data_queue_qid). * @length: Length of the entire frame. * @header_length: Length of 802.11 header. * @length_high: PLCP length high word. @@ -313,7 +322,7 @@ enum txentry_desc_flags { struct txentry_desc { unsigned long flags; - enum data_queue_qid queue; + enum data_queue_qid qid; u16 length; u16 header_length; @@ -351,17 +360,17 @@ struct txentry_desc { * @ENTRY_OWNER_DEVICE_DATA: This entry is owned by the device for data * transfer (either TX or RX depending on the queue). The entry should * only be touched after the device has signaled it is done with it. - * @ENTRY_OWNER_DEVICE_CRYPTO: This entry is owned by the device for data - * encryption or decryption. The entry should only be touched after - * the device has signaled it is done with it. * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting * for the signal to start sending. + * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured + * while transfering the data to the hardware. No TX status report will + * be expected from the hardware. */ enum queue_entry_flags { ENTRY_BCN_ASSIGNED, ENTRY_OWNER_DEVICE_DATA, - ENTRY_OWNER_DEVICE_CRYPTO, ENTRY_DATA_PENDING, + ENTRY_DATA_IO_FAILED }; /** @@ -392,18 +401,18 @@ struct queue_entry { * * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is * owned by the hardware then the queue is considered to be full. + * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been + * transfered to the hardware. * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by * the hardware and for which we need to run the txdone handler. If this * entry is not owned by the hardware the queue is considered to be empty. - * @Q_INDEX_CRYPTO: Index pointer to the next entry which encryption/decription - * will be completed by the hardware next. * @Q_INDEX_MAX: Keep last, used in &struct data_queue to determine the size * of the index array. */ enum queue_index { Q_INDEX, + Q_INDEX_DMA_DONE, Q_INDEX_DONE, - Q_INDEX_CRYPTO, Q_INDEX_MAX, }; @@ -444,6 +453,7 @@ struct data_queue { unsigned short threshold; unsigned short length; unsigned short index[Q_INDEX_MAX]; + unsigned long last_action[Q_INDEX_MAX]; unsigned short txop; unsigned short aifs; @@ -556,6 +566,22 @@ struct data_queue_desc { queue_loop(__entry, (__dev)->tx, queue_end(__dev)) /** + * rt2x00queue_for_each_entry - Loop through all entries in the queue + * @queue: Pointer to @data_queue + * @start: &enum queue_index Pointer to start index + * @end: &enum queue_index Pointer to end index + * @fn: The function to call for each &struct queue_entry + * + * This will walk through all entries in the queue, in chronological + * order. This means it will start at the current @start pointer + * and will walk through the queue until it reaches the @end pointer. + */ +void rt2x00queue_for_each_entry(struct data_queue *queue, + enum queue_index start, + enum queue_index end, + void (*fn)(struct queue_entry *entry)); + +/** * rt2x00queue_empty - Check if the queue is empty. * @queue: Queue to check if empty. */ @@ -592,6 +618,26 @@ static inline int rt2x00queue_threshold(struct data_queue *queue) } /** + * rt2x00queue_timeout - Check if a timeout occured for STATUS reorts + * @queue: Queue to check. + */ +static inline int rt2x00queue_timeout(struct data_queue *queue) +{ + return time_after(queue->last_action[Q_INDEX_DMA_DONE], + queue->last_action[Q_INDEX_DONE] + (HZ / 10)); +} + +/** + * rt2x00queue_timeout - Check if a timeout occured for DMA transfers + * @queue: Queue to check. + */ +static inline int rt2x00queue_dma_timeout(struct data_queue *queue) +{ + return time_after(queue->last_action[Q_INDEX], + queue->last_action[Q_INDEX_DMA_DONE] + (HZ / 10)); +} + +/** * _rt2x00_desc_read - Read a word from the hardware descriptor. * @desc: Base descriptor address * @word: Word index from where the descriptor should be read. |