summaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/pcmcia/3c574_cs.c7
-rw-r--r--drivers/net/pcmcia/3c589_cs.c7
-rw-r--r--drivers/net/pcmcia/axnet_cs.c80
-rw-r--r--drivers/net/pcmcia/com20020_cs.c8
-rw-r--r--drivers/net/pcmcia/fmvj18x_cs.c21
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c2
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c2
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c86
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c151
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c79
-rw-r--r--drivers/net/wireless/airo_cs.c222
-rw-r--r--drivers/net/wireless/atmel_cs.c119
-rw-r--r--drivers/net/wireless/b43/pcmcia.c16
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c237
-rw-r--r--drivers/net/wireless/libertas/if_cs.c2
-rw-r--r--drivers/net/wireless/netwave_cs.c5
-rw-r--r--drivers/net/wireless/orinoco_cs.c165
-rw-r--r--drivers/net/wireless/ray_cs.c4
-rw-r--r--drivers/net/wireless/spectrum_cs.c162
-rw-r--r--drivers/net/wireless/wavelan_cs.c16
-rw-r--r--drivers/net/wireless/wl3501_cs.c4
21 files changed, 644 insertions, 751 deletions
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 7112fd5e0e1b..08c4dd896077 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -355,9 +355,10 @@ static int tc574_config(struct pcmcia_device *link)
for (i = j = 0; j < 0x400; j += 0x20) {
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
@@ -377,7 +378,7 @@ static int tc574_config(struct pcmcia_device *link)
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
tuple.DesiredTuple = 0x88;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i]));
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 549a64558420..0b28d0d8ffa8 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -278,9 +278,10 @@ static int tc589_config(struct pcmcia_device *link)
if (multi && (j & 0x80)) continue;
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
@@ -295,7 +296,7 @@ static int tc589_config(struct pcmcia_device *link)
/* The 3c589 has an extra EEPROM for configuration info, including
the hardware address. The 3c562 puts the address in the CIS. */
tuple.DesiredTuple = 0x88;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i]));
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 52bf11b73c6e..b37a498939ae 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -262,7 +262,7 @@ static int try_io_port(struct pcmcia_device *link)
if (link->io.NumPorts2 > 0) {
/* for master/slave multifunction cards */
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes =
+ link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
}
} else {
@@ -276,7 +276,8 @@ static int try_io_port(struct pcmcia_device *link)
link->io.BasePort1 = j ^ 0x300;
link->io.BasePort2 = (j ^ 0x300) + 0x10;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
} else {
@@ -284,59 +285,50 @@ static int try_io_port(struct pcmcia_device *link)
}
}
+static int axnet_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -ENODEV;
+
+ p_dev->conf.ConfigIndex = 0x05;
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return -ENODEV;
+}
+
static int axnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
axnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
int i, j, last_ret, last_fn;
- u_short buf[64];
DECLARE_MAC_BUF(mac);
DEBUG(0, "axnet_config(0x%p)\n", link);
- tuple.Attributes = 0;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
/* don't trust the CIS on this; Linksys got it wrong */
link->conf.Present = 0x63;
-
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = 0x05;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
- if (last_ret != CS_SUCCESS) {
+ last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
+ if (last_ret != 0) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index ea9414c4d900..831090c75622 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -260,21 +260,21 @@ static int com20020_config(struct pcmcia_device *link)
DEBUG(0, "com20020_config(0x%p)\n", link);
DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
- i = !CS_SUCCESS;
+ i = -ENODEV;
if (!link->io.BasePort1)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
link->io.BasePort1 = ioaddr;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
}
else
i = pcmcia_request_io(link, &link->io);
- if (i != CS_SUCCESS)
+ if (i != 0)
{
DEBUG(1,"arcnet: requestIO failed totally!\n");
goto failed;
@@ -287,7 +287,7 @@ static int com20020_config(struct pcmcia_device *link)
link->irq.AssignedIRQ,
link->irq.IRQInfo1, link->irq.IRQInfo2);
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS)
+ if (i != 0)
{
DEBUG(1,"arcnet: requestIRQ failed totally!\n");
goto failed;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index a550c9bd126f..69d916daa7bb 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -309,7 +309,8 @@ static int mfc_try_io_port(struct pcmcia_device *link)
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
}
@@ -325,7 +326,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link)
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
link->io.BasePort1 = ioaddr;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) {
+ if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
@@ -356,12 +357,12 @@ static int fmvj18x_config(struct pcmcia_device *link)
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_FUNCE;
tuple.TupleOffset = 0;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
link->conf.ConfigIndex = parse.cftable_entry.index;
switch (link->manf_id) {
case MANFID_TDK:
@@ -430,10 +431,10 @@ static int fmvj18x_config(struct pcmcia_device *link)
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
ret = mfc_try_io_port(link);
- if (ret != CS_SUCCESS) goto cs_failed;
+ if (ret != 0) goto cs_failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
- if (ret != CS_SUCCESS) goto cs_failed;
+ if (ret != 0) goto cs_failed;
} else {
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
}
@@ -565,7 +566,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return -1;
}
@@ -599,7 +600,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return (i != 0x200) ? 0 : -1;
@@ -620,7 +621,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return -1;
}
@@ -642,7 +643,7 @@ static int fmvj18x_setup_mfc(struct pcmcia_device *link)
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return 0;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 4eafa4f42cff..cf3cca4642f2 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -238,7 +238,7 @@ static int __devinit ibmtr_config(struct pcmcia_device *link)
/* Try PRIMARY card at 0xA20-0xA23 */
link->io.BasePort1 = 0xA20;
i = pcmcia_request_io(link, &link->io);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
link->io.BasePort1 = 0xA24;
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index cfcbea9b7e2e..54df34f21c5f 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -925,7 +925,7 @@ static void mace_tx_timeout(struct net_device *dev)
printk(KERN_NOTICE "%s: transmit timed out -- ", dev->name);
#if RESET_ON_TIMEOUT
printk("resetting card\n");
- pcmcia_reset_card(link, NULL);
+ pcmcia_reset_card(link->socket);
#else /* #if RESET_ON_TIMEOUT */
printk("NOT resetting card\n");
#endif /* #if RESET_ON_TIMEOUT */
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index ebc1ae6bcbe5..e40d6301aa7a 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -310,7 +310,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return NULL;
}
@@ -333,7 +333,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link)
iounmap(virt);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return (i < NR_INFO) ? hw_info+i : NULL;
} /* get_hwinfo */
@@ -504,7 +504,8 @@ static int try_io_port(struct pcmcia_device *link)
link->io.BasePort1 = j ^ 0x300;
link->io.BasePort2 = (j ^ 0x300) + 0x10;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
} else {
@@ -512,58 +513,53 @@ static int try_io_port(struct pcmcia_device *link)
}
}
+static int pcnet_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *has_shmem = priv_data;
+ int i;
+ cistpl_io_t *io = &cfg->io;
+
+ if (cfg->index == 0 || cfg->io.nwin == 0)
+ return -EINVAL;
+
+ /* For multifunction cards, by convention, we configure the
+ network function with window 0, and serial with window 1 */
+ if (io->nwin > 1) {
+ i = (io->win[1].len > io->win[0].len);
+ p_dev->io.BasePort2 = io->win[1-i].base;
+ p_dev->io.NumPorts2 = io->win[1-i].len;
+ } else {
+ i = p_dev->io.NumPorts2 = 0;
+ }
+
+ *has_shmem = ((cfg->mem.nwin == 1) &&
+ (cfg->mem.win[0].len >= 0x4000));
+ p_dev->io.BasePort1 = io->win[i].base;
+ p_dev->io.NumPorts1 = io->win[i].len;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32)
+ return try_io_port(p_dev);
+
+ return 0;
+}
+
static int pcnet_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
pcnet_dev_t *info = PRIV(dev);
- tuple_t tuple;
- cisparse_t parse;
- int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
+ int last_ret, last_fn, start_pg, stop_pg, cm_offset;
int has_shmem = 0;
- u_short buf[64];
hw_info_t *local_hw_info;
DECLARE_MAC_BUF(mac);
DEBUG(0, "pcnet_config(0x%p)\n", link);
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (last_ret == CS_SUCCESS) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_io_t *io = &(parse.cftable_entry.io);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0 ||
- cfg->index == 0 || cfg->io.nwin == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- link->io.BasePort2 = io->win[1-i].base;
- link->io.NumPorts2 = io->win[1-i].len;
- } else {
- i = link->io.NumPorts2 = 0;
- }
- has_shmem = ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000));
- link->io.BasePort1 = io->win[i].base;
- link->io.NumPorts1 = io->win[i].len;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) {
- last_ret = try_io_port(link);
- if (last_ret == CS_SUCCESS) break;
- }
- next_entry:
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
- if (last_ret != CS_SUCCESS) {
+ last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
+ if (last_ret) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 250eb1954c34..c74d6656d266 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -409,10 +409,13 @@ static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple,
{
int i;
- if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS ||
- (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+ i = pcmcia_get_first_tuple(handle, tuple);
+ if (i != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != 0)
+ return i;
+ return pcmcia_parse_tuple(tuple, parse);
}
static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
@@ -420,10 +423,10 @@ static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple,
{
int i;
- if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS ||
- (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+ if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
+ (i = pcmcia_get_tuple_data(handle, tuple)) != 0)
return i;
- return pcmcia_parse_tuple(handle, tuple, parse);
+ return pcmcia_parse_tuple(tuple, parse);
}
/*======================================================================
@@ -459,27 +462,36 @@ static int mhz_3288_power(struct pcmcia_device *link)
return 0;
}
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int k;
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ for (k = 0; k < 0x400; k += 0x10) {
+ if (k & 0x80)
+ continue;
+ p_dev->io.BasePort1 = k ^ 0x300;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int mhz_mfc_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
struct smc_private *smc = netdev_priv(dev);
struct smc_cfg_mem *cfg_mem;
- tuple_t *tuple;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- u_char *buf;
win_req_t req;
memreq_t mem;
- int i, k;
+ int i;
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
+ return -ENOMEM;
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
@@ -489,27 +501,9 @@ static int mhz_mfc_config(struct pcmcia_device *link)
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts2 = 8;
- tuple->Attributes = tuple->TupleOffset = 0;
- tuple->TupleData = (cisdata_t *)buf;
- tuple->TupleDataMax = 255;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
- i = first_tuple(link, tuple, parse);
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
- while (i == CS_SUCCESS) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort2 = cf->io.win[0].base;
- for (k = 0; k < 0x400; k += 0x10) {
- if (k & 0x80) continue;
- link->io.BasePort1 = k ^ 0x300;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- if (i == CS_SUCCESS) break;
- i = next_tuple(link, tuple, parse);
- }
- if (i != CS_SUCCESS)
+ if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL))
goto free_cfg_mem;
dev->base_addr = link->io.BasePort1;
@@ -518,7 +512,7 @@ static int mhz_mfc_config(struct pcmcia_device *link)
req.Base = req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS)
+ if (i != 0)
goto free_cfg_mem;
smc->base = ioremap(req.Base, req.Size);
mem.CardOffset = mem.Page = 0;
@@ -526,14 +520,14 @@ static int mhz_mfc_config(struct pcmcia_device *link)
mem.CardOffset = link->conf.ConfigBase;
i = pcmcia_map_mem_page(link->win, &mem);
- if ((i == CS_SUCCESS)
+ if ((i == 0)
&& (smc->manfid == MANFID_MEGAHERTZ)
&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
mhz_3288_power(link);
free_cfg_mem:
kfree(cfg_mem);
- return i;
+ return -ENODEV;
}
static int mhz_setup(struct pcmcia_device *link)
@@ -560,12 +554,12 @@ static int mhz_setup(struct pcmcia_device *link)
/* Read the station address from the CIS. It is stored as the last
(fourth) string in the Version 1 Version/ID tuple. */
tuple->DesiredTuple = CISTPL_VERS_1;
- if (first_tuple(link, tuple, parse) != CS_SUCCESS) {
+ if (first_tuple(link, tuple, parse) != 0) {
rc = -1;
goto free_cfg_mem;
}
/* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
- if (next_tuple(link, tuple, parse) != CS_SUCCESS)
+ if (next_tuple(link, tuple, parse) != 0)
first_tuple(link, tuple, parse);
if (parse->version_1.ns > 3) {
station_addr = parse->version_1.str + parse->version_1.ofs[3];
@@ -577,11 +571,11 @@ static int mhz_setup(struct pcmcia_device *link)
/* Another possibility: for the EM3288, in a special tuple */
tuple->DesiredTuple = 0x81;
- if (pcmcia_get_first_tuple(link, tuple) != CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, tuple) != 0) {
rc = -1;
goto free_cfg_mem;
}
- if (pcmcia_get_tuple_data(link, tuple) != CS_SUCCESS) {
+ if (pcmcia_get_tuple_data(link, tuple) != 0) {
rc = -1;
goto free_cfg_mem;
}
@@ -660,46 +654,27 @@ static int mot_setup(struct pcmcia_device *link)
/*====================================================================*/
+static int smc_configcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int smc_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
- struct smc_cfg_mem *cfg_mem;
- tuple_t *tuple;
- cisparse_t *parse;
- cistpl_cftable_entry_t *cf;
- u_char *buf;
int i;
- cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
- if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
-
- tuple = &cfg_mem->tuple;
- parse = &cfg_mem->parse;
- cf = &parse->cftable_entry;
- buf = cfg_mem->buf;
-
- tuple->Attributes = tuple->TupleOffset = 0;
- tuple->TupleData = (cisdata_t *)buf;
- tuple->TupleDataMax = 255;
- tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
link->io.NumPorts1 = 16;
- i = first_tuple(link, tuple, parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i == CS_SUCCESS) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
- }
- i = next_tuple(link, tuple, parse);
- }
- if (i == CS_SUCCESS)
- dev->base_addr = link->io.BasePort1;
+ i = pcmcia_loop_config(link, smc_configcheck, NULL);
+ if (!i)
+ dev->base_addr = link->io.BasePort1;
- kfree(cfg_mem);
return i;
}
@@ -715,7 +690,7 @@ static int smc_setup(struct pcmcia_device *link)
cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
- return CS_OUT_OF_RESOURCE;
+ return -ENOMEM;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
@@ -728,12 +703,12 @@ static int smc_setup(struct pcmcia_device *link)
/* Check for a LAN function extension tuple */
tuple->DesiredTuple = CISTPL_FUNCE;
i = first_tuple(link, tuple, parse);
- while (i == CS_SUCCESS) {
+ while (i == 0) {
if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
break;
i = next_tuple(link, tuple, parse);
}
- if (i == CS_SUCCESS) {
+ if (i == 0) {
node_id = (cistpl_lan_node_id_t *)parse->funce.data;
if (node_id->nb == 6) {
for (i = 0; i < 6; i++)
@@ -780,9 +755,10 @@ static int osi_config(struct pcmcia_device *link)
for (i = j = 0; j < 4; j++) {
link->io.BasePort2 = com[j];
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
link->io.NumPorts2 = 0;
@@ -815,13 +791,13 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid)
/* Read the station address from tuple 0x90, subtuple 0x04 */
tuple->DesiredTuple = 0x90;
i = pcmcia_get_first_tuple(link, tuple);
- while (i == CS_SUCCESS) {
+ while (i == 0) {
i = pcmcia_get_tuple_data(link, tuple);
- if ((i != CS_SUCCESS) || (buf[0] == 0x04))
+ if ((i != 0) || (buf[0] == 0x04))
break;
i = pcmcia_get_next_tuple(link, tuple);
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
rc = -1;
goto free_cfg_mem;
}
@@ -959,8 +935,11 @@ static int check_sig(struct pcmcia_device *link)
======================================================================*/
-#define CS_EXIT_TEST(ret, svc, label) \
-if (ret != CS_SUCCESS) { cs_error(link, svc, ret); goto label; }
+#define CS_EXIT_TEST(ret, svc, label) \
+if (ret != 0) { \
+ cs_error(link, svc, ret); \
+ goto label; \
+}
static int smc91c92_config(struct pcmcia_device *link)
{
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index c33a3d523566..e1fd585e7131 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -377,7 +377,7 @@ first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 &&
(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
- err = pcmcia_parse_tuple(handle, tuple, parse);
+ err = pcmcia_parse_tuple(tuple, parse);
return err;
}
@@ -388,7 +388,7 @@ next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 &&
(err = pcmcia_get_tuple_data(handle, tuple)) == 0)
- err = pcmcia_parse_tuple(handle, tuple, parse);
+ err = pcmcia_parse_tuple(tuple, parse);
return err;
}
@@ -715,6 +715,47 @@ has_ce2_string(struct pcmcia_device * p_dev)
return 0;
}
+static int
+xirc2ps_config_modem(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ unsigned int ioaddr;
+
+ if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+ for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->io.BasePort1 = ioaddr;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
+}
+
+static int
+xirc2ps_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ int *pass = priv_data;
+
+ if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
+ p_dev->io.BasePort2 = cf->io.win[0].base;
+ p_dev->io.BasePort1 = p_dev->io.BasePort2
+ + (*pass ? (cf->index & 0x20 ? -24:8)
+ : (cf->index & 0x20 ? 8:-24));
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
+
+}
+
/****************
* xirc2ps_config() is scheduled to run after a CARD_INSERTION event
* is received, to configure the PCMCIA socket, and to make the
@@ -725,13 +766,12 @@ xirc2ps_config(struct pcmcia_device * link)
{
struct net_device *dev = link->priv;
local_info_t *local = netdev_priv(dev);
+ unsigned int ioaddr;
tuple_t tuple;
cisparse_t parse;
- unsigned int ioaddr;
int err, i;
u_char buf[64];
cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
DECLARE_MAC_BUF(mac);
local->dingo_ccr = NULL;
@@ -846,19 +886,8 @@ xirc2ps_config(struct pcmcia_device * link)
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
link->io.NumPorts1 = 16; /* no Mako stuff anymore */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (err = first_tuple(link, &tuple, &parse); !err;
- err = next_tuple(link, &tuple, &parse)) {
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->conf.ConfigIndex = cf->index ;
- link->io.BasePort2 = cf->io.win[0].base;
- link->io.BasePort1 = ioaddr;
- if (!(err=pcmcia_request_io(link, &link->io)))
- goto port_found;
- }
- }
- }
+ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
+ goto port_found;
} else {
link->io.NumPorts1 = 18;
/* We do 2 passes here: The first one uses the regular mapping and
@@ -866,21 +895,9 @@ xirc2ps_config(struct pcmcia_device * link)
* mirrored every 32 bytes. Actually we use a mirrored port for
* the Mako if (on the first pass) the COR bit 5 is set.
*/
- for (pass=0; pass < 2; pass++) {
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (err = first_tuple(link, &tuple, &parse); !err;
- err = next_tuple(link, &tuple, &parse)){
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){
- link->conf.ConfigIndex = cf->index ;
- link->io.BasePort2 = cf->io.win[0].base;
- link->io.BasePort1 = link->io.BasePort2
- + (pass ? (cf->index & 0x20 ? -24:8)
- : (cf->index & 0x20 ? 8:-24));
- if (!(err=pcmcia_request_io(link, &link->io)))
+ for (pass=0; pass < 2; pass++)
+ if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass))
goto port_found;
- }
- }
- }
/* if special option:
* try to configure as Ethernet only.
* .... */
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index fd72e427cb28..27696c20f4c2 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,126 +206,123 @@ static void airo_detach(struct pcmcia_device *link)
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+static int airo_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ win_req_t *req = priv_data;
+
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ return -ENODEV;
+
+ /*
+ Now set up a common memory window, if needed. There is room
+ in the struct pcmcia_device structure for one memory window handle,
+ but if the base addresses need to be saved, or if multiple
+ windows are needed, the info should go in the private data
+ structure for this device.
+
+ Note that the memory window base is a physical address, and
+ needs to be mapped to virtual space with ioremap() before it
+ is used.
+ */
+ if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+ cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ memreq_t map;
+ req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req->Base = mem->win[0].host_addr;
+ req->Size = mem->win[0].len;
+ req->AccessSpeed = 0;
+ if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
+ return -ENODEV;
+ map.Page = 0;
+ map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(p_dev->win, &map) != 0)
+ return -ENODEV;
+ }
+ /* If we got this far, we're cool! */
+ return 0;
+}
+
+
static int airo_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
+ win_req_t *req;
int last_fn, last_ret;
- u_char buf[64];
- win_req_t req;
- memreq_t map;
dev = link->priv;
DEBUG(0, "airo_config(0x%p)\n", link);
+ req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ /*
+ * In this loop, we scan the CIS for configuration table
+ * entries, each of which describes a valid card
+ * configuration, including voltage, IO window, memory window,
+ * and interrupt settings.
+ *
+ * We make no assumptions about the card to be configured: we
+ * use just the information available in the CIS. In an ideal
+ * world, this would work for any PCMCIA card, but it requires
+ * a complete and accurate CIS. In practice, a driver usually
+ * "knows" most of these things without consulting the CIS,
+ * and most client drivers will only use the CIS to fill in
+ * implementation-defined details.
+ */
+ last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
+ if (last_ret)
+ goto failed;
+
/*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
+ Allocate an interrupt line. Note that this does not assign a
+ handler to the interrupt, unless the 'Handler' member of the
+ irq structure is initialized.
*/
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
-
- /*
- Now set up a common memory window, if needed. There is room
- in the struct pcmcia_device structure for one memory window handle,
- but if the base addresses need to be saved, or if multiple
- windows are needed, the info should go in the private data
- structure for this device.
-
- Note that the memory window base is a physical address, and
- needs to be mapped to virtual space with ioremap() before it
- is used.
- */
- if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
- req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
- req.Base = mem->win[0].host_addr;
- req.Size = mem->win[0].len;
- req.AccessSpeed = 0;
- if (pcmcia_request_window(&link, &req, &link->win) != 0)
- goto next_entry;
- map.Page = 0; map.CardOffset = mem->win[0].card_addr;
- if (pcmcia_map_mem_page(link->win, &map) != 0)
- goto next_entry;
- }
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
-
- /*
- Allocate an interrupt line. Note that this does not assign a
- handler to the interrupt, unless the 'Handler' member of the
- irq structure is initialized.
- */
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
@@ -362,14 +359,17 @@ static int airo_config(struct pcmcia_device *link)
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
if (link->win)
- printk(", mem 0x%06lx-0x%06lx", req.Base,
- req.Base+req.Size-1);
+ printk(", mem 0x%06lx-0x%06lx", req->Base,
+ req->Base+req->Size-1);
printk("\n");
+ kfree(req);
return 0;
cs_failed:
cs_error(link, last_fn, last_ret);
+ failed:
airo_release(link);
+ kfree(req);
return -ENODEV;
} /* airo_config */
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index d2388e8d179a..77406245dc7b 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -224,13 +224,58 @@ static int card_present(void *arg)
return 0;
}
+static int atmel_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int atmel_config(struct pcmcia_device *link)
{
- tuple_t tuple;
- cisparse_t parse;
local_info_t *dev;
int last_fn, last_ret;
- u_char buf[64];
struct pcmcia_device_id *did;
dev = link->priv;
@@ -238,11 +283,6 @@ static int atmel_config(struct pcmcia_device *link)
DEBUG(0, "atmel_config(0x%p)\n", link);
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
@@ -255,66 +295,8 @@ static int atmel_config(struct pcmcia_device *link)
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t dflt = { 0 };
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
- pcmcia_parse_tuple(link, &tuple, &parse) != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
- if (cfg->index == 0) goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
-
- /* If we got this far, we're cool! */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- }
+ if (pcmcia_loop_config(link, atmel_config_check, NULL))
+ goto failed;
/*
Allocate an interrupt line. Note that this does not assign a
@@ -360,6 +342,7 @@ static int atmel_config(struct pcmcia_device *link)
cs_failed:
cs_error(link, last_fn, last_ret);
+ failed:
atmel_release(link);
return -ENODEV;
}
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b8aa16307f79..3cfc30307a27 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -82,13 +82,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
tuple.TupleOffset = 0;
res = pcmcia_get_first_tuple(dev, &tuple);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
res = pcmcia_get_tuple_data(dev, &tuple);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
- res = pcmcia_parse_tuple(dev, &tuple, &parse);
- if (res != CS_SUCCESS)
+ res = pcmcia_parse_tuple(&tuple, &parse);
+ if (res != 0)
goto err_kfree_ssb;
dev->conf.ConfigBase = parse.config.base;
@@ -107,13 +107,13 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
win.Size = SSB_CORE_SIZE;
win.AccessSpeed = 250;
res = pcmcia_request_window(&dev, &win, &dev->win);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
mem.CardOffset = 0;
mem.Page = 0;
res = pcmcia_map_mem_page(dev->win, &mem);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -121,11 +121,11 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
res = pcmcia_request_configuration(dev, &dev->conf);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 3b4e55cf33cd..633740277352 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -234,7 +234,7 @@ static void sandisk_set_iobase(local_info_t *local)
reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
@@ -246,7 +246,7 @@ static void sandisk_set_iobase(local_info_t *local)
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
@@ -305,7 +305,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
- pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
+ pcmcia_parse_tuple(&tuple, parse) ||
parse->longlink_mfc.nfn < 2) {
/* No multi-function links found */
ret = -ENODEV;
@@ -322,7 +322,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
reg.Value = COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
@@ -339,7 +339,7 @@ static int sandisk_enable_wireless(struct net_device *dev)
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
@@ -374,7 +374,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
@@ -386,7 +386,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
@@ -399,7 +399,7 @@ static void prism2_pccard_cor_sreset(local_info_t *local)
reg.Value |= COR_IREQ_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
@@ -433,7 +433,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
@@ -446,7 +446,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
@@ -460,7 +460,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
reg.Offset = CISREG_CCSR;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
@@ -472,7 +472,7 @@ static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
reg.Value = old_cor & ~COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
&reg);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
@@ -532,145 +532,118 @@ static void prism2_detach(struct pcmcia_device *link)
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-#define CFG_CHECK2(fn, retf) \
-do { int _ret = (retf); \
-if (_ret != 0) { \
- PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \
- cs_error(link, fn, _ret); \
- goto next_entry; \
-} \
-} while (0)
-
/* run after a CARD_INSERTION event is received to configure the PCMCIA
* socket and make the device available to the system */
+
+static int prism2_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
+ "(default 0x%02X)\n", cfg->index, dflt->index);
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+ p_dev->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
+ " this entry\n");
+ return -ENODEV;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
+ 10000 && !ignore_cis_vcc) {
+ PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
+ "- skipping this entry\n");
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
+ /* At least Compaq WL200 does not have IRQInfo1 set,
+ * but it does not work without interrupts.. */
+ printk(KERN_WARNING "Config has no IRQ info, but trying to "
+ "enable IRQ anyway..\n");
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+ }
+
+ /* IO window settings */
+ PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
+ "dflt->io.nwin=%d\n",
+ cfg->io.nwin, dflt->io.nwin);
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
+ "io.base=0x%04x, len=%d\n", io->flags,
+ io->win[0].base, io->win[0].len);
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags &
+ CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int prism2_config(struct pcmcia_device *link)
{
struct net_device *dev;
struct hostap_interface *iface;
local_info_t *local;
int ret = 1;
- tuple_t tuple;
- cisparse_t *parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
struct hostap_cs_priv *hw_priv;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
- parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
- if (parse == NULL || hw_priv == NULL) {
+ if (hw_priv == NULL) {
ret = -ENOMEM;
goto failed;
}
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/* Look for an appropriate configuration table entry in the CIS */
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- for (;;) {
- cistpl_cftable_entry_t *cfg = &(parse->cftable_entry);
- CFG_CHECK2(GetTupleData,
- pcmcia_get_tuple_data(link, &tuple));
- CFG_CHECK2(ParseTuple,
- pcmcia_parse_tuple(link, &tuple, parse));
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
- PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
- "(default 0x%02X)\n", cfg->index, dflt.index);
-
- /* Does this card need audio output? */
- if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
- link->conf.Attributes |= CONF_ENABLE_SPKR;
- link->conf.Status = CCSR_AUDIO_ENA;
- }
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
- " this entry\n");
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] /
- 10000 && !ignore_cis_vcc) {
- PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
- "- skipping this entry\n");
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk("Config has no IRQ info, but trying to enable "
- "IRQ anyway..\n");
- link->conf.Attributes |= CONF_ENABLE_IRQ;
- }
-
- /* IO window settings */
- PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
- "dflt.io.nwin=%d\n",
- cfg->io.nwin, dflt.io.nwin);
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
- "io.base=0x%04x, len=%d\n", io->flags,
- io->win[0].base, io->win[0].len);
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags &
- CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 = link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
- }
-
- /* This reserves IO space but doesn't actually enable it */
- CFG_CHECK2(RequestIO,
- pcmcia_request_io(link, &link->io));
-
- /* This configuration table entry is OK */
- break;
-
- next_entry:
- CS_CHECK(GetNextTuple,
- pcmcia_get_next_tuple(link, &tuple));
+ last_ret = pcmcia_loop_config(link, prism2_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
+ printk(KERN_ERR "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/* Need to allocate net_device before requesting IRQ handler */
@@ -738,14 +711,12 @@ static int prism2_config(struct pcmcia_device *link)
if (ret == 0 && local->ddev)
strcpy(hw_priv->node.dev_name, local->ddev->name);
}
- kfree(parse);
return ret;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
- kfree(parse);
kfree(hw_priv);
prism2_release((u_long)link);
return ret;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index e3505c110af6..842a08d1f106 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -791,7 +791,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 ||
(ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 ||
- (ret = pcmcia_parse_tuple(p_dev, &tuple, &parse)) != 0)
+ (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0)
{
lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
goto out1;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 25bae7933aa5..a670f36b5f3f 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -749,9 +749,10 @@ static int netwave_pcmcia_config(struct pcmcia_device *link) {
for (i = j = 0x0; j < 0x400; j += 0x20) {
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 9eaa252c2430..e585684e59a0 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -80,7 +80,7 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
/* We need atomic ops here, because we're not holding the lock */
set_bit(0, &card->hard_reset_in_progress);
- err = pcmcia_reset_card(link, NULL);
+ err = pcmcia_reset_card(link->socket);
if (err)
return err;
@@ -165,6 +165,70 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
} while (0)
+static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
static int
orinoco_cs_config(struct pcmcia_device *link)
{
@@ -173,16 +237,8 @@ orinoco_cs_config(struct pcmcia_device *link)
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- tuple_t tuple;
- cisparse_t parse;
void __iomem *mem;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -197,94 +253,14 @@ orinoco_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_cftable_entry_t dflt = { .index = 0 };
-
- if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
- || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
- if(!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io =
- (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines =
- io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 =
- link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
-
- /* If we got this far, we're cool! */
-
- break;
-
- next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- if (last_ret == CS_NO_MORE_ITEMS) {
+ last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- goto cs_failed;
- }
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/*
@@ -335,7 +311,6 @@ orinoco_cs_config(struct pcmcia_device *link)
"0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
-
return 0;
cs_failed:
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 44da0d19b5c8..1404a5717520 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -798,9 +798,9 @@ static void ray_release(struct pcmcia_device *link)
iounmap(local->amem);
/* Do bother checking to see if these succeed or not */
i = pcmcia_release_window(local->amem_handle);
- if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
+ if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
i = pcmcia_release_window(local->rmem_handle);
- if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
+ if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
pcmcia_disable_device(link);
DEBUG(2,"ray_release ending\n");
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 67b26d3c3cd5..b0c71c3be467 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -235,6 +235,70 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
* device available to the system.
*/
+static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ goto next_entry;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ p_dev->io.Attributes2 = p_dev->io.Attributes1;
+ p_dev->io.BasePort2 = io->win[1].base;
+ p_dev->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
+ goto next_entry;
+ }
+ return 0;
+
+next_entry:
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+};
+
static int
spectrum_cs_config(struct pcmcia_device *link)
{
@@ -243,16 +307,8 @@ spectrum_cs_config(struct pcmcia_device *link)
struct orinoco_pccard *card = priv->card;
hermes_t *hw = &priv->hw;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- tuple_t tuple;
- cisparse_t parse;
void __iomem *mem;
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
/*
* In this loop, we scan the CIS for configuration table
* entries, each of which describes a valid card
@@ -267,94 +323,14 @@ spectrum_cs_config(struct pcmcia_device *link)
* and most client drivers will only use the CIS to fill in
* implementation-defined details.
*/
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
- cistpl_cftable_entry_t dflt = { .index = 0 };
-
- if ( (pcmcia_get_tuple_data(link, &tuple) != 0)
- || (pcmcia_parse_tuple(link, &tuple, &parse) != 0))
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- dflt = *cfg;
- if (cfg->index == 0)
- goto next_entry;
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
- if (!ignore_cis_vcc)
- goto next_entry;
- }
- } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
- DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
- if(!ignore_cis_vcc)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- /* Do we need to allocate an interrupt? */
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io =
- (cfg->io.nwin) ? &cfg->io : &dflt.io;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(io->flags & CISTPL_IO_8BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_16;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 =
- IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines =
- io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
- if (io->nwin > 1) {
- link->io.Attributes2 =
- link->io.Attributes1;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = io->win[1].len;
- }
-
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
-
-
- /* If we got this far, we're cool! */
-
- break;
-
- next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- if (last_ret == CS_NO_MORE_ITEMS) {
+ last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL);
+ if (last_ret) {
+ if (!ignore_cis_vcc)
printk(KERN_ERR PFX "GetNextTuple(): No matching "
"CIS configuration. Maybe you need the "
"ignore_cis_vcc=1 parameter.\n");
- goto cs_failed;
- }
+ cs_error(link, RequestIO, last_ret);
+ goto failed;
}
/*
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index b5de38a9b791..e124b1d6267a 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3702,7 +3702,7 @@ wv_pcmcia_reset(struct net_device * dev)
#endif
i = pcmcia_access_configuration_register(link, &reg);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
@@ -3716,7 +3716,7 @@ wv_pcmcia_reset(struct net_device * dev)
reg.Action = CS_WRITE;
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, &reg);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
@@ -3725,7 +3725,7 @@ wv_pcmcia_reset(struct net_device * dev)
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, &reg);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
@@ -3903,7 +3903,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
do
{
i = pcmcia_request_io(link, &link->io);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestIO, i);
break;
@@ -3914,7 +3914,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
* actually assign a handler to the interrupt.
*/
i = pcmcia_request_irq(link, &link->irq);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestIRQ, i);
break;
@@ -3926,7 +3926,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
*/
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestConfiguration, i);
break;
@@ -3942,7 +3942,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
req.Base = req.Size = 0;
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestWindow, i);
break;
@@ -3954,7 +3954,7 @@ wv_pcmcia_config(struct pcmcia_device * link)
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, MapMemPage, i);
break;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 74a5ad2f1223..68789c6e1ce9 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1977,10 +1977,10 @@ static int wl3501_config(struct pcmcia_device *link)
link->io.BasePort1 = j;
link->io.BasePort2 = link->io.BasePort1 + 0x10;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}