summaryrefslogtreecommitdiff
path: root/drivers/phy/marvell/phy-pxa-28nm-hsic.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/marvell/phy-pxa-28nm-hsic.c')
-rw-r--r--drivers/phy/marvell/phy-pxa-28nm-hsic.c40
1 files changed, 20 insertions, 20 deletions
diff --git a/drivers/phy/marvell/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
index ae8370af59c0..31b43d2ee39a 100644
--- a/drivers/phy/marvell/phy-pxa-28nm-hsic.c
+++ b/drivers/phy/marvell/phy-pxa-28nm-hsic.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/module.h>
@@ -44,15 +45,12 @@ struct mv_hsic_phy {
struct clk *clk;
};
-static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
+static int wait_for_reg(void __iomem *reg, u32 mask, u32 ms)
{
- timeout += jiffies;
- while (time_is_after_eq_jiffies(timeout)) {
- if ((readl(reg) & mask) == mask)
- return true;
- msleep(1);
- }
- return false;
+ u32 val;
+
+ return readl_poll_timeout(reg, val, ((val & mask) == mask),
+ 1000, 1000 * ms);
}
static int mv_hsic_phy_init(struct phy *phy)
@@ -60,6 +58,7 @@ static int mv_hsic_phy_init(struct phy *phy)
struct mv_hsic_phy *mv_phy = phy_get_drvdata(phy);
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
+ int ret;
clk_prepare_enable(mv_phy->clk);
@@ -75,14 +74,14 @@ static int mv_hsic_phy_init(struct phy *phy)
base + PHY_28NM_HSIC_PLL_CTRL2);
/* Make sure PHY PLL is locked */
- if (!wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2,
- PHY_28NM_HSIC_H2S_PLL_LOCK, HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_HSIC_PLL_CTRL2,
+ PHY_28NM_HSIC_H2S_PLL_LOCK, 100);
+ if (ret) {
dev_err(&pdev->dev, "HSIC PHY PLL not locked after 100mS.");
clk_disable_unprepare(mv_phy->clk);
- return -ETIMEDOUT;
}
- return 0;
+ return ret;
}
static int mv_hsic_phy_power_on(struct phy *phy)
@@ -91,6 +90,7 @@ static int mv_hsic_phy_power_on(struct phy *phy)
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
u32 reg;
+ int ret;
reg = readl(base + PHY_28NM_HSIC_CTRL);
/* Avoid SE0 state when resume for some device will take it as reset */
@@ -108,20 +108,20 @@ static int mv_hsic_phy_power_on(struct phy *phy)
*/
/* Make sure PHY Calibration is ready */
- if (!wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL,
- PHY_28NM_HSIC_H2S_IMPCAL_DONE, HZ / 10)) {
+ ret = wait_for_reg(base + PHY_28NM_HSIC_IMPCAL_CAL,
+ PHY_28NM_HSIC_H2S_IMPCAL_DONE, 100);
+ if (ret) {
dev_warn(&pdev->dev, "HSIC PHY READY not set after 100mS.");
- return -ETIMEDOUT;
+ return ret;
}
/* Waiting for HSIC connect int*/
- if (!wait_for_reg(base + PHY_28NM_HSIC_INT,
- PHY_28NM_HSIC_CONNECT_INT, HZ / 5)) {
+ ret = wait_for_reg(base + PHY_28NM_HSIC_INT,
+ PHY_28NM_HSIC_CONNECT_INT, 200);
+ if (ret)
dev_warn(&pdev->dev, "HSIC wait for connect interrupt timeout.");
- return -ETIMEDOUT;
- }
- return 0;
+ return ret;
}
static int mv_hsic_phy_power_off(struct phy *phy)