diff options
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index cbe0f96ca342..23e3e4a35cc9 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -546,6 +546,16 @@ config REGULATOR_MAX1586 regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX597X + tristate "Maxim 597x power switch and monitor" + depends on I2C + depends on OF + depends on MFD_MAX597X + help + This driver controls a Maxim 5970/5978 switch via I2C bus. + The MAX5970/5978 is a smart switch with no output regulation, but + fault protection and voltage and current monitoring capabilities. + config REGULATOR_MAX77620 tristate "Maxim 77620/MAX20024 voltage regulator" depends on MFD_MAX77620 || COMPILE_TEST @@ -804,6 +814,14 @@ config REGULATOR_MT6360 2-channel buck with Thermal Shutdown and Overload Protection 6-channel High PSRR and Low Dropout LDO. +config REGULATOR_MT6370 + tristate "MT6370 SubPMIC Regulator" + depends on MFD_MT6370 + help + Say Y here to enable MT6370 regulator support. + This driver supports the control for DisplayBias voltages and one + general purpose LDO which is commonly used to drive the vibrator. + config REGULATOR_MT6380 tristate "MediaTek MT6380 PMIC" depends on MTK_PMIC_WRAP @@ -1047,6 +1065,16 @@ config REGULATOR_RT5033 RT5033 PMIC. The device supports multiple regulators like current source, LDO and Buck. +config REGULATOR_RT5120 + tristate "Richtek RT5120 PMIC Regulators" + depends on MFD_RT5120 + help + This adds support for voltage regulator in Richtek RT5120 PMIC. + It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN + to control external power source. Only BUCK1 is adjustable from + 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage + by external hardware circuit. + config REGULATOR_RT5190A tristate "Richtek RT5190A PMIC" depends on I2C |