diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_scsih.c')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_scsih.c | 74 |
1 files changed, 63 insertions, 11 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 75f3fce1c867..46e866c36c8a 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -51,6 +51,7 @@ #include <linux/workqueue.h> #include <linux/delay.h> #include <linux/pci.h> +#include <linux/pci-aspm.h> #include <linux/interrupt.h> #include <linux/aer.h> #include <linux/raid_class.h> @@ -1074,6 +1075,26 @@ _scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid) } /** + * __scsih_scsi_lookup_get_clear - returns scmd entry without + * holding any lock. + * @ioc: per adapter object + * @smid: system request message index + * + * Returns the smid stored scmd pointer. + * Then will dereference the stored scmd pointer. + */ +static inline struct scsi_cmnd * +__scsih_scsi_lookup_get_clear(struct MPT3SAS_ADAPTER *ioc, + u16 smid) +{ + struct scsi_cmnd *scmd = NULL; + + swap(scmd, ioc->scsi_lookup[smid - 1].scmd); + + return scmd; +} + +/** * _scsih_scsi_lookup_get_clear - returns scmd entry * @ioc: per adapter object * @smid: system request message index @@ -1088,8 +1109,7 @@ _scsih_scsi_lookup_get_clear(struct MPT3SAS_ADAPTER *ioc, u16 smid) struct scsi_cmnd *scmd; spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); - scmd = ioc->scsi_lookup[smid - 1].scmd; - ioc->scsi_lookup[smid - 1].scmd = NULL; + scmd = __scsih_scsi_lookup_get_clear(ioc, smid); spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); return scmd; @@ -4657,9 +4677,16 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) struct MPT3SAS_DEVICE *sas_device_priv_data; u32 response_code = 0; unsigned long flags; + unsigned int sector_sz; mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); - scmd = _scsih_scsi_lookup_get_clear(ioc, smid); + + if (ioc->broadcast_aen_busy || ioc->pci_error_recovery || + ioc->got_task_abort_from_ioctl) + scmd = _scsih_scsi_lookup_get_clear(ioc, smid); + else + scmd = __scsih_scsi_lookup_get_clear(ioc, smid); + if (scmd == NULL) return 1; @@ -4715,6 +4742,20 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) } xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); + + /* In case of bogus fw or device, we could end up having + * unaligned partial completion. We can force alignment here, + * then scsi-ml does not need to handle this misbehavior. + */ + sector_sz = scmd->device->sector_size; + if (unlikely(!blk_rq_is_passthrough(scmd->request) && sector_sz && + xfer_cnt % sector_sz)) { + sdev_printk(KERN_INFO, scmd->device, + "unaligned partial completion avoided (xfer_cnt=%u, sector_sz=%u)\n", + xfer_cnt, sector_sz); + xfer_cnt = round_down(xfer_cnt, sector_sz); + } + scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt); if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) log_info = le32_to_cpu(mpi_reply->IOCLogInfo); @@ -8028,15 +8069,24 @@ mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION: ActiveCableEventData = (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData; - if (ActiveCableEventData->ReasonCode == - MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) { - pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d", - ioc->name, ActiveCableEventData->ReceptacleID); - pr_info("cannot be powered and devices connected to this active cable"); - pr_info("will not be seen. This active cable"); - pr_info("requires %d mW of power", - ActiveCableEventData->ActiveCablePowerRequirement); + switch (ActiveCableEventData->ReasonCode) { + case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER: + pr_notice(MPT3SAS_FMT "Receptacle ID %d: This active cable" + " requires %d mW of power\n", ioc->name, + ActiveCableEventData->ReceptacleID, + ActiveCableEventData->ActiveCablePowerRequirement); + pr_notice(MPT3SAS_FMT "Receptacle ID %d: Devices connected" + " to this active cable will not be seen\n", + ioc->name, ActiveCableEventData->ReceptacleID); + break; + + case MPI26_EVENT_ACTIVE_CABLE_DEGRADED: + pr_notice(MPT3SAS_FMT "ReceptacleID %d: This cable", + ioc->name, ActiveCableEventData->ReceptacleID); + pr_notice(" is not running at an optimal speed(12 Gb/s)\n"); + break; } + break; default: /* ignore the rest */ @@ -8746,6 +8796,8 @@ _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id) switch (hba_mpi_version) { case MPI2_VERSION: + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | + PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM); /* Use mpt2sas driver host template for SAS 2.0 HBA's */ shost = scsi_host_alloc(&mpt2sas_driver_template, sizeof(struct MPT3SAS_ADAPTER)); |