diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_init.c')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_init.c | 403 |
1 files changed, 376 insertions, 27 deletions
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 4229bb483c5e..55540d2d4e38 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -328,6 +328,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) if (rval) return (rval); } + if (IS_QLA84XX(ha)) { ha->cs84xx = qla84xx_get_chip(vha); if (!ha->cs84xx) { @@ -340,7 +341,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) ha->flags.chip_reset_done = 1; if (rval == QLA_SUCCESS && IS_QLA84XX(ha)) { - /* Issue verify 84xx FW IOCB to complete 84xx initialization */ + /* Issue verify 84xx FW IOCB to complete 84xx initialization */ rval = qla84xx_init_chip(vha); if (rval != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, @@ -349,6 +350,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha) } } + if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) { + if (qla24xx_read_fcp_prio_cfg(vha)) + qla_printk(KERN_ERR, ha, + "Unable to read FCP priority data.\n"); + } + return (rval); } @@ -955,6 +962,9 @@ qla24xx_chip_diag(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + if (IS_QLA82XX(ha)) + return QLA_SUCCESS; + ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length; rval = qla2x00_mbx_reg_test(vha); @@ -1177,6 +1187,12 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) unsigned long flags; uint16_t fw_major_version; + if (IS_QLA82XX(ha)) { + rval = ha->isp_ops->load_risc(vha, &srisc_address); + if (rval == QLA_SUCCESS) + goto enable_82xx_npiv; + } + if (!IS_FWI2_CAPABLE(ha) && !IS_QLA2100(ha) && !IS_QLA2200(ha)) { /* Disable SRAM, Instruction RAM and GP RAM parity. */ spin_lock_irqsave(&ha->hardware_lock, flags); @@ -1202,6 +1218,7 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) rval = qla2x00_execute_fw(vha, srisc_address); /* Retrieve firmware information. */ if (rval == QLA_SUCCESS) { +enable_82xx_npiv: fw_major_version = ha->fw_major_version; rval = qla2x00_get_fw_version(vha, &ha->fw_major_version, @@ -1226,8 +1243,10 @@ qla2x00_setup_chip(scsi_qla_host_t *vha) &ha->fw_xcb_count, NULL, NULL, &ha->max_npiv_vports, NULL); - if (!fw_major_version && ql2xallocfwdump) - qla2x00_alloc_fw_dump(vha); + if (!fw_major_version && ql2xallocfwdump) { + if (!IS_QLA82XX(ha)) + qla2x00_alloc_fw_dump(vha); + } } } else { DEBUG2(printk(KERN_INFO @@ -1384,6 +1403,9 @@ qla24xx_update_fw_options(scsi_qla_host_t *vha) int rval; struct qla_hw_data *ha = vha->hw; + if (IS_QLA82XX(ha)) + return; + /* Update Serial Link options. */ if ((le16_to_cpu(ha->fw_seriallink_options24[0]) & BIT_0) == 0) return; @@ -1818,7 +1840,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha) return(rval); } -static inline void +inline void qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, char *def) { @@ -1826,7 +1848,7 @@ qla2x00_set_model_info(scsi_qla_host_t *vha, uint8_t *model, size_t len, uint16_t index; struct qla_hw_data *ha = vha->hw; int use_tbl = !IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha) && - !IS_QLA81XX(ha); + !IS_QLA8XXX_TYPE(ha); if (memcmp(model, BINZERO, len) != 0) { strncpy(ha->model_number, model, len); @@ -3546,6 +3568,45 @@ qla2x00_update_fcports(scsi_qla_host_t *base_vha) qla2x00_rport_del(fcport); } +void +qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev); + struct scsi_qla_host *tvp; + + vha->flags.online = 0; + ha->flags.chip_reset_done = 0; + clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); + ha->qla_stats.total_isp_aborts++; + + qla_printk(KERN_INFO, ha, + "Performing ISP error recovery - ha= %p.\n", ha); + + /* Chip reset does not apply to 82XX */ + if (!IS_QLA82XX(ha)) + ha->isp_ops->reset_chip(vha); + + atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); + if (atomic_read(&vha->loop_state) != LOOP_DOWN) { + atomic_set(&vha->loop_state, LOOP_DOWN); + qla2x00_mark_all_devices_lost(vha, 0); + list_for_each_entry_safe(vp, tvp, &base_vha->hw->vp_list, list) + qla2x00_mark_all_devices_lost(vp, 0); + } else { + if (!atomic_read(&vha->loop_down_timer)) + atomic_set(&vha->loop_down_timer, + LOOP_DOWN_TIME); + } + + /* Make sure for ISP 82XX IO DMA is complete */ + if (IS_QLA82XX(ha)) + qla82xx_wait_for_pending_commands(vha); + + /* Requeue all commands in outstanding command list. */ + qla2x00_abort_all_cmds(vha, DID_RESET << 16); +} + /* * qla2x00_abort_isp * Resets ISP and aborts all outstanding commands. @@ -3567,27 +3628,7 @@ qla2x00_abort_isp(scsi_qla_host_t *vha) struct req_que *req = ha->req_q_map[0]; if (vha->flags.online) { - vha->flags.online = 0; - ha->flags.chip_reset_done = 0; - clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); - ha->qla_stats.total_isp_aborts++; - - qla_printk(KERN_INFO, ha, - "Performing ISP error recovery - ha= %p.\n", ha); - ha->isp_ops->reset_chip(vha); - - atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); - if (atomic_read(&vha->loop_state) != LOOP_DOWN) { - atomic_set(&vha->loop_state, LOOP_DOWN); - qla2x00_mark_all_devices_lost(vha, 0); - } else { - if (!atomic_read(&vha->loop_down_timer)) - atomic_set(&vha->loop_down_timer, - LOOP_DOWN_TIME); - } - - /* Requeue all commands in outstanding command list. */ - qla2x00_abort_all_cmds(vha, DID_RESET << 16); + qla2x00_abort_isp_cleanup(vha); if (unlikely(pci_channel_offline(ha->pdev) && ha->flags.pci_channel_io_perm_failure)) { @@ -3843,6 +3884,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) struct qla_hw_data *ha = vha->hw; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; + if (IS_QLA82XX(ha)) + return; + vha->flags.online = 0; ha->isp_ops->disable_intrs(ha); @@ -3906,6 +3950,8 @@ qla24xx_nvram_config(scsi_qla_host_t *vha) } ha->nvram_size = sizeof(struct nvram_24xx); ha->vpd_size = FA_NVRAM_VPD_SIZE; + if (IS_QLA82XX(ha)) + ha->vpd_size = FA_VPD_SIZE_82XX; /* Get VPD data into cache */ ha->vpd = ha->nvram + VPD_OFFSET; @@ -4769,7 +4815,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) * Setup driver NVRAM options. */ qla2x00_set_model_info(vha, nv->model_name, sizeof(nv->model_name), - "QLE81XX"); + "QLE8XXX"); /* Use alternate WWN? */ if (nv->host_p & __constant_cpu_to_le32(BIT_15)) { @@ -4892,6 +4938,147 @@ qla81xx_nvram_config(scsi_qla_host_t *vha) return (rval); } +int +qla82xx_restart_isp(scsi_qla_host_t *vha) +{ + int status, rval; + uint32_t wait_time; + struct qla_hw_data *ha = vha->hw; + struct req_que *req = ha->req_q_map[0]; + struct rsp_que *rsp = ha->rsp_q_map[0]; + struct scsi_qla_host *vp; + struct scsi_qla_host *tvp; + + status = qla2x00_init_rings(vha); + if (!status) { + clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); + ha->flags.chip_reset_done = 1; + + status = qla2x00_fw_ready(vha); + if (!status) { + qla_printk(KERN_INFO, ha, + "%s(): Start configure loop, " + "status = %d\n", __func__, status); + + /* Issue a marker after FW becomes ready. */ + qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); + + vha->flags.online = 1; + /* Wait at most MAX_TARGET RSCNs for a stable link. */ + wait_time = 256; + do { + clear_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags); + qla2x00_configure_loop(vha); + wait_time--; + } while (!atomic_read(&vha->loop_down_timer) && + !(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) && + wait_time && + (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags))); + } + + /* if no cable then assume it's good */ + if ((vha->device_flags & DFLG_NO_CABLE)) + status = 0; + + qla_printk(KERN_INFO, ha, + "%s(): Configure loop done, status = 0x%x\n", + __func__, status); + } + + if (!status) { + clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags); + + if (!atomic_read(&vha->loop_down_timer)) { + /* + * Issue marker command only when we are going + * to start the I/O . + */ + vha->marker_needed = 1; + } + + vha->flags.online = 1; + + ha->isp_ops->enable_intrs(ha); + + ha->isp_abort_cnt = 0; + clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + + if (ha->fce) { + ha->flags.fce_enabled = 1; + memset(ha->fce, 0, + fce_calc_size(ha->fce_bufs)); + rval = qla2x00_enable_fce_trace(vha, + ha->fce_dma, ha->fce_bufs, ha->fce_mb, + &ha->fce_bufs); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize FCE " + "(%d).\n", rval); + ha->flags.fce_enabled = 0; + } + } + + if (ha->eft) { + memset(ha->eft, 0, EFT_SIZE); + rval = qla2x00_enable_eft_trace(vha, + ha->eft_dma, EFT_NUM_BUFFERS); + if (rval) { + qla_printk(KERN_WARNING, ha, + "Unable to reinitialize EFT " + "(%d).\n", rval); + } + } + } else { /* failed the ISP abort */ + vha->flags.online = 1; + if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { + if (ha->isp_abort_cnt == 0) { + qla_printk(KERN_WARNING, ha, + "ISP error recovery failed - " + "board disabled\n"); + /* + * The next call disables the board + * completely. + */ + ha->isp_ops->reset_adapter(vha); + vha->flags.online = 0; + clear_bit(ISP_ABORT_RETRY, + &vha->dpc_flags); + status = 0; + } else { /* schedule another ISP abort */ + ha->isp_abort_cnt--; + qla_printk(KERN_INFO, ha, + "qla%ld: ISP abort - " + "retry remaining %d\n", + vha->host_no, ha->isp_abort_cnt); + status = 1; + } + } else { + ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; + qla_printk(KERN_INFO, ha, + "(%ld): ISP error recovery " + "- retrying (%d) more times\n", + vha->host_no, ha->isp_abort_cnt); + set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); + status = 1; + } + } + + if (!status) { + DEBUG(printk(KERN_INFO + "qla82xx_restart_isp(%ld): succeeded.\n", + vha->host_no)); + list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) { + if (vp->vp_idx) + qla2x00_vp_abort_isp(vp); + } + } else { + qla_printk(KERN_INFO, ha, + "qla82xx_restart_isp: **** FAILED ****\n"); + } + + return status; +} + void qla81xx_update_fw_options(scsi_qla_host_t *vha) { @@ -4905,3 +5092,165 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha) ha->fw_options[2] |= BIT_9; qla2x00_set_fw_options(vha, ha->fw_options); } + +/* + * qla24xx_get_fcp_prio + * Gets the fcp cmd priority value for the logged in port. + * Looks for a match of the port descriptors within + * each of the fcp prio config entries. If a match is found, + * the tag (priority) value is returned. + * + * Input: + * ha = adapter block po + * fcport = port structure pointer. + * + * Return: + * non-zero (if found) + * 0 (if not found) + * + * Context: + * Kernel context + */ +uint8_t +qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport) +{ + int i, entries; + uint8_t pid_match, wwn_match; + uint8_t priority; + uint32_t pid1, pid2; + uint64_t wwn1, wwn2; + struct qla_fcp_prio_entry *pri_entry; + struct qla_hw_data *ha = vha->hw; + + if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled) + return 0; + + priority = 0; + entries = ha->fcp_prio_cfg->num_entries; + pri_entry = &ha->fcp_prio_cfg->entry[0]; + + for (i = 0; i < entries; i++) { + pid_match = wwn_match = 0; + + if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) { + pri_entry++; + continue; + } + + /* check source pid for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) { + pid1 = pri_entry->src_pid & INVALID_PORT_ID; + pid2 = vha->d_id.b24 & INVALID_PORT_ID; + if (pid1 == INVALID_PORT_ID) + pid_match++; + else if (pid1 == pid2) + pid_match++; + } + + /* check destination pid for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) { + pid1 = pri_entry->dst_pid & INVALID_PORT_ID; + pid2 = fcport->d_id.b24 & INVALID_PORT_ID; + if (pid1 == INVALID_PORT_ID) + pid_match++; + else if (pid1 == pid2) + pid_match++; + } + + /* check source WWN for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) { + wwn1 = wwn_to_u64(vha->port_name); + wwn2 = wwn_to_u64(pri_entry->src_wwpn); + if (wwn2 == (uint64_t)-1) + wwn_match++; + else if (wwn1 == wwn2) + wwn_match++; + } + + /* check destination WWN for a match */ + if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) { + wwn1 = wwn_to_u64(fcport->port_name); + wwn2 = wwn_to_u64(pri_entry->dst_wwpn); + if (wwn2 == (uint64_t)-1) + wwn_match++; + else if (wwn1 == wwn2) + wwn_match++; + } + + if (pid_match == 2 || wwn_match == 2) { + /* Found a matching entry */ + if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID) + priority = pri_entry->tag; + break; + } + + pri_entry++; + } + + return priority; +} + +/* + * qla24xx_update_fcport_fcp_prio + * Activates fcp priority for the logged in fc port + * + * Input: + * ha = adapter block pointer. + * fcp = port structure pointer. + * + * Return: + * QLA_SUCCESS or QLA_FUNCTION_FAILED + * + * Context: + * Kernel context. + */ +int +qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *ha, fc_port_t *fcport) +{ + int ret; + uint8_t priority; + uint16_t mb[5]; + + if (atomic_read(&fcport->state) == FCS_UNCONFIGURED || + fcport->port_type != FCT_TARGET || + fcport->loop_id == FC_NO_LOOP_ID) + return QLA_FUNCTION_FAILED; + + priority = qla24xx_get_fcp_prio(ha, fcport); + ret = qla24xx_set_fcp_prio(ha, fcport->loop_id, priority, mb); + if (ret == QLA_SUCCESS) + fcport->fcp_prio = priority; + else + DEBUG2(printk(KERN_WARNING + "scsi(%ld): Unable to activate fcp priority, " + " ret=0x%x\n", ha->host_no, ret)); + + return ret; +} + +/* + * qla24xx_update_all_fcp_prio + * Activates fcp priority for all the logged in ports + * + * Input: + * ha = adapter block pointer. + * + * Return: + * QLA_SUCCESS or QLA_FUNCTION_FAILED + * + * Context: + * Kernel context. + */ +int +qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha) +{ + int ret; + fc_port_t *fcport; + + ret = QLA_FUNCTION_FAILED; + /* We need to set priority for all logged in ports */ + list_for_each_entry(fcport, &vha->vp_fcports, list) + ret = qla24xx_update_fcport_fcp_prio(vha, fcport); + + return ret; +} |