diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/aacraid/linit.c | 2 | ||||
-rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_core.c | 2 | ||||
-rw-r--r-- | drivers/scsi/bfa/bfi_ms.h | 2 | ||||
-rw-r--r-- | drivers/scsi/fcoe/fcoe_ctlr.c | 2 | ||||
-rw-r--r-- | drivers/scsi/ipr.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 2 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 18 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 | ||||
-rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_ctl.h | 2 | ||||
-rw-r--r-- | drivers/scsi/osd/osd_initiator.c | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_transport_sas.c | 2 | ||||
-rw-r--r-- | drivers/scsi/storvsc_drv.c | 2 |
12 files changed, 20 insertions, 20 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 3ecbf20ca29f..cc66a1568799 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -1418,7 +1418,7 @@ static int aac_acquire_resources(struct aac_dev *dev) if (!dev->sync_mode) { /* After EEH recovery or suspend resume, max_msix count - * may change, therfore updating in init as well. + * may change, therefore updating in init as well. */ dev->init->Sa_MSIXVectors = cpu_to_le32(dev->max_msix); aac_adapter_start(dev); diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 109e2c99e6c1..95d8f25cbcca 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -6278,7 +6278,7 @@ ahd_reset(struct ahd_softc *ahd, int reinit) * does not disable its parity logic prior to * the start of the reset. This may cause a * parity error to be detected and thus a - * spurious SERR or PERR assertion. Disble + * spurious SERR or PERR assertion. Disable * PERR and SERR responses during the CHIPRST. */ mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN); diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h index ae5bfe039fcc..ccbd9e31a5de 100644 --- a/drivers/scsi/bfa/bfi_ms.h +++ b/drivers/scsi/bfa/bfi_ms.h @@ -680,7 +680,7 @@ struct bfi_ioim_req_s { /* * SG elements array within the IO request must be double word - * aligned. This aligment is required to optimize SGM setup for the IO. + * aligned. This alignment is required to optimize SGM setup for the IO. */ struct bfi_sge_s sges[BFI_SGE_INLINE_MAX]; u8 io_timeout; diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index cea57e27e713..656463ff9ccb 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1387,7 +1387,7 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, /* * Actually need to subtract 'sizeof(*mp) - sizeof(*wp)' from 'rlen' * before determining max Vx_Port descriptor but a buggy FCF could have - * omited either or both MAC Address and Name Identifier descriptors + * omitted either or both MAC Address and Name Identifier descriptors */ num_vlink_desc = rlen / sizeof(*vp); if (num_vlink_desc) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 835c59c777f2..b29afafc2885 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -9330,7 +9330,7 @@ static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev, * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..) * @ioa_cfg: ioa cfg struct * - * Description: This is the second phase of adapter intialization + * Description: This is the second phase of adapter initialization * This function takes care of initilizing the adapter to the point * where it can accept new commands. diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8301c08b8768..9f60a284c84e 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -3111,7 +3111,7 @@ static DEVICE_ATTR(lpfc_static_vport, S_IRUGO, * @buf: Data buffer. * @count: Size of the data buffer. * - * This function get called when an user write to the lpfc_stat_data_ctrl + * This function get called when a user write to the lpfc_stat_data_ctrl * sysfs file. This function parse the command written to the sysfs file * and take appropriate action. These commands are used for controlling * driver statistical data collection. diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 3a8470d55af5..326a55e29fb8 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4510,7 +4510,7 @@ lpfc_sli4_rb_setup(struct lpfc_hba *phba) * @phba: Pointer to HBA context object. * @sli_mode: sli mode - 2/3 * - * This function is called by the sli intialization code path + * This function is called by the sli initialization code path * to issue config_port mailbox command. This function restarts the * HBA firmware and issues a config_port mailbox command to configure * the SLI interface in the sli mode specified by sli_mode @@ -4650,11 +4650,11 @@ do_prep_failed: /** - * lpfc_sli_hba_setup - SLI intialization function + * lpfc_sli_hba_setup - SLI initialization function * @phba: Pointer to HBA context object. * - * This function is the main SLI intialization function. This function - * is called by the HBA intialization code, HBA reset code and HBA + * This function is the main SLI initialization function. This function + * is called by the HBA initialization code, HBA reset code and HBA * error attention handler code. Caller is not required to hold any * locks. This function issues config_port mailbox command to configure * the SLI, setup iocb rings and HBQ rings. In the end the function @@ -6317,11 +6317,11 @@ lpfc_set_host_data(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox) } /** - * lpfc_sli4_hba_setup - SLI4 device intialization PCI function + * lpfc_sli4_hba_setup - SLI4 device initialization PCI function * @phba: Pointer to HBA context object. * - * This function is the main SLI4 device intialization PCI function. This - * function is called by the HBA intialization code, HBA reset code and + * This function is the main SLI4 device initialization PCI function. This + * function is called by the HBA initialization code, HBA reset code and * HBA error attention handler code. Caller is not required to hold any * locks. **/ @@ -12072,7 +12072,7 @@ lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq, * @phba: Pointer to HBA context object. * @wcqe: Pointer to work-queue completion queue entry. * - * This routine handles slow-path WQ entry comsumed event by invoking the + * This routine handles slow-path WQ entry consumed event by invoking the * proper WQ release routine to the slow-path WQ. **/ static void @@ -12444,7 +12444,7 @@ lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq, * @cq: Pointer to completion queue. * @wcqe: Pointer to work-queue completion queue entry. * - * This routine handles an fast-path WQ entry comsumed event by invoking the + * This routine handles an fast-path WQ entry consumed event by invoking the * proper WQ release routine to the slow-path WQ. **/ static void diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c index 95f0f24bac05..c7e1aac01172 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c @@ -1923,7 +1923,7 @@ mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type, * * This allows ownership of the specified buffer to returned to the driver, * allowing an application to read the buffer without fear that firmware is - * overwritting information in the buffer. + * overwriting information in the buffer. */ static long _ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg) diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.h b/drivers/scsi/mpt3sas/mpt3sas_ctl.h index f3e17a8c1b07..a44046cff0f3 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_ctl.h +++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.h @@ -390,7 +390,7 @@ struct mpt3_diag_query { * * This allows ownership of the specified buffer to returned to the driver, * allowing an application to read the buffer without fear that firmware is - * overwritting information in the buffer. + * overwriting information in the buffer. */ struct mpt3_diag_release { struct mpt3_ioctl_header hdr; diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index ef99f62831fb..2d2db99dc28c 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -1675,7 +1675,7 @@ int osd_finalize_request(struct osd_request *or, } } else { /* TODO: I think that for the GET_ATTR command these 2 should - * be reversed to keep them in execution order (for embeded + * be reversed to keep them in execution order (for embedded * targets with low memory footprint) */ ret = _osd_req_finalize_set_attr_list(or); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 60b651bfaa01..7b53ad0e9e0e 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -1462,7 +1462,7 @@ static void sas_end_device_release(struct device *dev) } /** - * sas_rphy_initialize - common rphy intialization + * sas_rphy_initialize - common rphy initialization * @rphy: rphy to initialise * * Used by both sas_end_device_alloc() and sas_expander_alloc() to diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 888e16ec8554..5c42cb32588c 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -280,7 +280,7 @@ static const struct vmstor_protocol vmstor_protocols[] = { /* - * This structure is sent during the intialization phase to get the different + * This structure is sent during the initialization phase to get the different * properties of the channel. */ |