diff options
Diffstat (limited to 'drivers/staging/et131x/et131x_debug.c')
| -rw-r--r-- | drivers/staging/et131x/et131x_debug.c | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c deleted file mode 100644 index d1dd46e0a9c8..000000000000 --- a/drivers/staging/et131x/et131x_debug.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * Agere Systems Inc. - * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * http://www.agere.com - * - *------------------------------------------------------------------------------ - * - * et131x_debug.c - Routines used for debugging. - * - *------------------------------------------------------------------------------ - * - * SOFTWARE LICENSE - * - * This software is provided subject to the following terms and conditions, - * which you should read carefully before using the software. Using this - * software indicates your acceptance of these terms and conditions. If you do - * not agree with these terms and conditions, do not use the software. - * - * Copyright © 2005 Agere Systems Inc. - * All rights reserved. - * - * Redistribution and use in source or binary forms, with or without - * modifications, are permitted provided that the following conditions are met: - * - * . Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following Disclaimer as comments in the code as - * well as in the documentation and/or other materials provided with the - * distribution. - * - * . Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following Disclaimer in the documentation - * and/or other materials provided with the distribution. - * - * . Neither the name of Agere Systems Inc. nor the names of the contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * Disclaimer - * - * THIS SOFTWARE IS PROVIDED “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY - * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN - * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT - * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH - * DAMAGE. - * - */ - -#ifdef CONFIG_ET131X_DEBUG - -#include "et131x_version.h" -#include "et131x_debug.h" -#include "et131x_defs.h" - -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/sched.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/in.h> -#include <linux/delay.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/bitops.h> - -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/if_arp.h> -#include <linux/ioport.h> -#include <linux/random.h> - -#include "et1310_phy.h" -#include "et1310_pm.h" -#include "et1310_jagcore.h" - -#include "et131x_adapter.h" -#include "et131x_netdev.h" -#include "et131x_config.h" -#include "et131x_isr.h" - -#include "et1310_address_map.h" -#include "et1310_tx.h" -#include "et1310_rx.h" -#include "et1310_mac.h" - -/* Data for debugging facilities */ -extern dbg_info_t *et131x_dbginfo; - -/** - * DumpTxQueueContents - Dump out the tx queue and the shadow pointers - * @pAdapter: pointer to our adapter structure - */ -void DumpTxQueueContents(int dbgLvl, struct et131x_adapter *pAdapter) -{ - MMC_t __iomem *mmc = &pAdapter->CSRAddress->mmc; - uint32_t TxQueueAddr; - - if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { - for (TxQueueAddr = 0x200; TxQueueAddr < 0x3ff; TxQueueAddr++) { - MMC_SRAM_ACCESS_t sram_access; - - sram_access.value = readl(&mmc->sram_access.value); - sram_access.bits.req_addr = TxQueueAddr; - sram_access.bits.req_access = 1; - writel(sram_access.value, &mmc->sram_access.value); - - DBG_PRINT("Addr 0x%x, Access 0x%08x\t" - "Value 1 0x%08x, Value 2 0x%08x, " - "Value 3 0x%08x, Value 4 0x%08x, \n", - TxQueueAddr, - readl(&mmc->sram_access.value), - readl(&mmc->sram_word1), - readl(&mmc->sram_word2), - readl(&mmc->sram_word3), - readl(&mmc->sram_word4)); - } - - DBG_PRINT("Shadow Pointers 0x%08x\n", - readl(&pAdapter->CSRAddress->txmac.shadow_ptr.value)); - } -} - -/** - * DumpDeviceBlock - * @pAdapter: pointer to our adapter - * - * Dumps the first 64 regs of each block of the et-1310 (each block is - * mapped to a new page, each page is 4096 bytes). - */ -#define NUM_BLOCKS 8 -void DumpDeviceBlock(int dbgLvl, struct et131x_adapter *pAdapter, - uint32_t Block) -{ - uint32_t Address1, Address2; - uint32_t __iomem *BigDevicePointer = - (uint32_t __iomem *) pAdapter->CSRAddress; - const char *BlockNames[NUM_BLOCKS] = { - "Global", "Tx DMA", "Rx DMA", "Tx MAC", - "Rx MAC", "MAC", "MAC Stat", "MMC" - }; - - /* Output the debug counters to the debug terminal */ - if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { - DBG_PRINT("%s block\n", BlockNames[Block]); - BigDevicePointer += Block * 1024; - for (Address1 = 0; Address1 < 8; Address1++) { - for (Address2 = 0; Address2 < 8; Address2++) { - if (Block == 0 && - (Address1 * 8 + Address2) == 6) { - DBG_PRINT(" ISR , "); - } else { - DBG_PRINT("0x%08x, ", - readl(BigDevicePointer++)); - } - } - DBG_PRINT("\n"); - } - DBG_PRINT("\n"); - } -} - -/** - * DumpDeviceReg - * @pAdapter: pointer to our adapter - * - * Dumps the first 64 regs of each block of the et-1310 (each block is - * mapped to a new page, each page is 4096 bytes). - */ -void DumpDeviceReg(int dbgLvl, struct et131x_adapter *pAdapter) -{ - uint32_t Address1, Address2; - uint32_t Block; - uint32_t __iomem *BigDevicePointer = - (uint32_t __iomem *) pAdapter->CSRAddress; - uint32_t __iomem *Pointer; - const char *BlockNames[NUM_BLOCKS] = { - "Global", "Tx DMA", "Rx DMA", "Tx MAC", - "Rx MAC", "MAC", "MAC Stat", "MMC" - }; - - /* Output the debug counters to the debug terminal */ - if (DBG_FLAGS(et131x_dbginfo) & dbgLvl) { - for (Block = 0; Block < NUM_BLOCKS; Block++) { - DBG_PRINT("%s block\n", BlockNames[Block]); - Pointer = BigDevicePointer + (Block * 1024); - - for (Address1 = 0; Address1 < 8; Address1++) { - for (Address2 = 0; Address2 < 8; Address2++) { - DBG_PRINT("0x%08x, ", - readl(Pointer++)); - } - DBG_PRINT("\n"); - } - DBG_PRINT("\n"); - } - } -} - -#endif // CONFIG_ET131X_DEBUG |