diff options
Diffstat (limited to 'drivers/staging/iio/magnetometer/hmc5843.c')
-rw-r--r-- | drivers/staging/iio/magnetometer/hmc5843.c | 522 |
1 files changed, 327 insertions, 195 deletions
diff --git a/drivers/staging/iio/magnetometer/hmc5843.c b/drivers/staging/iio/magnetometer/hmc5843.c index e00b416c4d33..c1fa09f07625 100644 --- a/drivers/staging/iio/magnetometer/hmc5843.c +++ b/drivers/staging/iio/magnetometer/hmc5843.c @@ -2,6 +2,8 @@ Author: Shubhrajyoti Datta <shubhrajyoti@ti.com> Acknowledgement: Jonathan Cameron <jic23@cam.ac.uk> for valuable inputs. + Support for HMC5883 and HMC5883L by Peter Meerwald <pmeerw@pmeerw.net>. + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -22,10 +24,8 @@ #include <linux/i2c.h> #include <linux/slab.h> #include <linux/types.h> -#include "../iio.h" -#include "../sysfs.h" - -#define HMC5843_I2C_ADDRESS 0x1E +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> #define HMC5843_CONFIG_REG_A 0x00 #define HMC5843_CONFIG_REG_B 0x01 @@ -36,110 +36,185 @@ #define HMC5843_DATA_OUT_Y_LSB_REG 0x06 #define HMC5843_DATA_OUT_Z_MSB_REG 0x07 #define HMC5843_DATA_OUT_Z_LSB_REG 0x08 +/* Beware: Y and Z are exchanged on HMC5883 */ +#define HMC5883_DATA_OUT_Z_MSB_REG 0x05 +#define HMC5883_DATA_OUT_Z_LSB_REG 0x06 +#define HMC5883_DATA_OUT_Y_MSB_REG 0x07 +#define HMC5883_DATA_OUT_Y_LSB_REG 0x08 #define HMC5843_STATUS_REG 0x09 #define HMC5843_ID_REG_A 0x0A #define HMC5843_ID_REG_B 0x0B #define HMC5843_ID_REG_C 0x0C +enum hmc5843_ids { + HMC5843_ID, + HMC5883_ID, + HMC5883L_ID, +}; + +/* + * Beware: identification of the HMC5883 is still "H43"; + * I2C address is also unchanged + */ #define HMC5843_ID_REG_LENGTH 0x03 #define HMC5843_ID_STRING "H43" +#define HMC5843_I2C_ADDRESS 0x1E /* - * Range settings in (+-)Ga - * */ -#define RANGE_GAIN_OFFSET 0x05 - -#define RANGE_0_7 0x00 -#define RANGE_1_0 0x01 /* default */ -#define RANGE_1_5 0x02 -#define RANGE_2_0 0x03 -#define RANGE_3_2 0x04 -#define RANGE_3_8 0x05 -#define RANGE_4_5 0x06 -#define RANGE_6_5 0x07 /* Not recommended */ + * Range gain settings in (+-)Ga + * Beware: HMC5843 and HMC5883 have different recommended sensor field + * ranges; default corresponds to +-1.0 Ga and +-1.3 Ga, respectively + */ +#define HMC5843_RANGE_GAIN_OFFSET 0x05 +#define HMC5843_RANGE_GAIN_DEFAULT 0x01 +#define HMC5843_RANGE_GAIN_MAX 0x07 /* * Device status */ -#define DATA_READY 0x01 -#define DATA_OUTPUT_LOCK 0x02 -#define VOLTAGE_REGULATOR_ENABLED 0x04 +#define HMC5843_DATA_READY 0x01 +#define HMC5843_DATA_OUTPUT_LOCK 0x02 +/* Does not exist on HMC5883, not used */ +#define HMC5843_VOLTAGE_REGULATOR_ENABLED 0x04 /* * Mode register configuration */ -#define MODE_CONVERSION_CONTINUOUS 0x00 -#define MODE_CONVERSION_SINGLE 0x01 -#define MODE_IDLE 0x02 -#define MODE_SLEEP 0x03 - -/* Minimum Data Output Rate in 1/10 Hz */ -#define RATE_OFFSET 0x02 -#define RATE_BITMASK 0x1C -#define RATE_5 0x00 -#define RATE_10 0x01 -#define RATE_20 0x02 -#define RATE_50 0x03 -#define RATE_100 0x04 -#define RATE_200 0x05 -#define RATE_500 0x06 -#define RATE_NOT_USED 0x07 +#define HMC5843_MODE_CONVERSION_CONTINUOUS 0x00 +#define HMC5843_MODE_CONVERSION_SINGLE 0x01 +#define HMC5843_MODE_IDLE 0x02 +#define HMC5843_MODE_SLEEP 0x03 +#define HMC5843_MODE_MASK 0x03 + +/* + * HMC5843: Minimum data output rate + * HMC5883: Typical data output rate + */ +#define HMC5843_RATE_OFFSET 0x02 +#define HMC5843_RATE_BITMASK 0x1C +#define HMC5843_RATE_NOT_USED 0x07 /* - * Device Configuration + * Device measurement configuration */ -#define CONF_NORMAL 0x00 -#define CONF_POSITIVE_BIAS 0x01 -#define CONF_NEGATIVE_BIAS 0x02 -#define CONF_NOT_USED 0x03 -#define MEAS_CONF_MASK 0x03 +#define HMC5843_MEAS_CONF_NORMAL 0x00 +#define HMC5843_MEAS_CONF_POSITIVE_BIAS 0x01 +#define HMC5843_MEAS_CONF_NEGATIVE_BIAS 0x02 +#define HMC5843_MEAS_CONF_NOT_USED 0x03 +#define HMC5843_MEAS_CONF_MASK 0x03 -static int hmc5843_regval_to_nanoscale[] = { +/* + * Scaling factors: 10000000/Gain + */ +static const int hmc5843_regval_to_nanoscale[] = { 6173, 7692, 10309, 12821, 18868, 21739, 25641, 35714 }; -static const int regval_to_input_field_mg[] = { - 700, - 1000, - 1500, - 2000, - 3200, - 3800, - 4500, - 6500 +static const int hmc5883_regval_to_nanoscale[] = { + 7812, 9766, 13021, 16287, 24096, 27701, 32573, 45662 }; -static const char * const regval_to_samp_freq[] = { - "0.5", - "1", - "2", - "5", - "10", - "20", - "50", + +static const int hmc5883l_regval_to_nanoscale[] = { + 7299, 9174, 12195, 15152, 22727, 25641, 30303, 43478 +}; + +/* + * From the HMC5843 datasheet: + * Value | Sensor input field range (Ga) | Gain (counts/milli-Gauss) + * 0 | (+-)0.7 | 1620 + * 1 | (+-)1.0 | 1300 + * 2 | (+-)1.5 | 970 + * 3 | (+-)2.0 | 780 + * 4 | (+-)3.2 | 530 + * 5 | (+-)3.8 | 460 + * 6 | (+-)4.5 | 390 + * 7 | (+-)6.5 | 280 + * + * From the HMC5883 datasheet: + * Value | Recommended sensor field range (Ga) | Gain (counts/Gauss) + * 0 | (+-)0.9 | 1280 + * 1 | (+-)1.2 | 1024 + * 2 | (+-)1.9 | 768 + * 3 | (+-)2.5 | 614 + * 4 | (+-)4.0 | 415 + * 5 | (+-)4.6 | 361 + * 6 | (+-)5.5 | 307 + * 7 | (+-)7.9 | 219 + * + * From the HMC5883L datasheet: + * Value | Recommended sensor field range (Ga) | Gain (LSB/Gauss) + * 0 | (+-)0.88 | 1370 + * 1 | (+-)1.3 | 1090 + * 2 | (+-)1.9 | 820 + * 3 | (+-)2.5 | 660 + * 4 | (+-)4.0 | 440 + * 5 | (+-)4.7 | 390 + * 6 | (+-)5.6 | 330 + * 7 | (+-)8.1 | 230 + */ +static const int hmc5843_regval_to_input_field_mga[] = { + 700, 1000, 1500, 2000, 3200, 3800, 4500, 6500 +}; + +static const int hmc5883_regval_to_input_field_mga[] = { + 900, 1200, 1900, 2500, 4000, 4600, 5500, 7900 +}; + +static const int hmc5883l_regval_to_input_field_mga[] = { + 880, 1300, 1900, 2500, 4000, 4700, 5600, 8100 +}; + +/* + * From the datasheet: + * Value | HMC5843 | HMC5883/HMC5883L + * | Data output rate (Hz) | Data output rate (Hz) + * 0 | 0.5 | 0.75 + * 1 | 1 | 1.5 + * 2 | 2 | 3 + * 3 | 5 | 7.5 + * 4 | 10 (default) | 15 + * 5 | 20 | 30 + * 6 | 50 | 75 + * 7 | Not used | Not used + */ +static const char * const hmc5843_regval_to_sample_freq[] = { + "0.5", "1", "2", "5", "10", "20", "50", +}; + +static const char * const hmc5883_regval_to_sample_freq[] = { + "0.75", "1.5", "3", "7.5", "15", "30", "75", }; /* Addresses to scan: 0x1E */ static const unsigned short normal_i2c[] = { HMC5843_I2C_ADDRESS, - I2C_CLIENT_END }; + I2C_CLIENT_END }; + +/* Describe chip variants */ +struct hmc5843_chip_info { + const struct iio_chan_spec *channels; + int num_channels; + const char * const *regval_to_sample_freq; + const int *regval_to_input_field_mga; + const int *regval_to_nanoscale; +}; /* Each client has this additional data */ struct hmc5843_data { struct mutex lock; - u8 rate; - u8 meas_conf; - u8 operating_mode; - u8 range; + u8 rate; + u8 meas_conf; + u8 operating_mode; + u8 range; + const struct hmc5843_chip_info *variant; }; -static void hmc5843_init_client(struct i2c_client *client); - +/* The lower two bits contain the current conversion mode */ static s32 hmc5843_configure(struct i2c_client *client, u8 operating_mode) { - /* The lower two bits contain the current conversion mode */ return i2c_smbus_write_byte_data(client, HMC5843_MODE_REG, - (operating_mode & 0x03)); + operating_mode & HMC5843_MODE_MASK); } /* Return the measurement value from the specified channel */ @@ -153,7 +228,7 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev, mutex_lock(&data->lock); result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); - while (!(result & DATA_READY)) + while (!(result & HMC5843_DATA_READY)) result = i2c_smbus_read_byte_data(client, HMC5843_STATUS_REG); result = i2c_smbus_read_word_data(client, address); @@ -161,30 +236,29 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev, if (result < 0) return -EINVAL; - *val = (s16)swab16((u16)result); + *val = (s16)swab16((u16)result); return IIO_VAL_INT; } - /* - * From the datasheet + * From the datasheet: * 0 - Continuous-Conversion Mode: In continuous-conversion mode, the - * device continuously performs conversions and places the result in the - * data register. + * device continuously performs conversions and places the result in + * the data register. * - * 1 - Single-Conversion Mode : device performs a single measurement, - * sets RDY high and returned to sleep mode + * 1 - Single-Conversion Mode : Device performs a single measurement, + * sets RDY high and returns to sleep mode. * - * 2 - Idle Mode : Device is placed in idle mode. + * 2 - Idle Mode : Device is placed in idle mode. * - * 3 - Sleep Mode. Device is placed in sleep mode. + * 3 - Sleep Mode : Device is placed in sleep mode. * */ static ssize_t hmc5843_show_operating_mode(struct device *dev, struct device_attribute *attr, char *buf) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct hmc5843_data *data = iio_priv(indio_dev); return sprintf(buf, "%d\n", data->operating_mode); } @@ -194,21 +268,22 @@ static ssize_t hmc5843_set_operating_mode(struct device *dev, const char *buf, size_t count) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct i2c_client *client = to_i2c_client(indio_dev->dev.parent); struct hmc5843_data *data = iio_priv(indio_dev); struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); unsigned long operating_mode = 0; s32 status; int error; + mutex_lock(&data->lock); - error = strict_strtoul(buf, 10, &operating_mode); + error = kstrtoul(buf, 10, &operating_mode); if (error) { count = error; goto exit; } - dev_dbg(dev, "set Conversion mode to %lu\n", operating_mode); - if (operating_mode > MODE_SLEEP) { + dev_dbg(dev, "set conversion mode to %lu\n", operating_mode); + if (operating_mode > HMC5843_MODE_SLEEP) { count = -EINVAL; goto exit; } @@ -225,6 +300,7 @@ exit: mutex_unlock(&data->lock); return count; } + static IIO_DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO, hmc5843_show_operating_mode, @@ -234,25 +310,29 @@ static IIO_DEVICE_ATTR(operating_mode, /* * API for setting the measurement configuration to * Normal, Positive bias and Negative bias - * From the datasheet * - * Normal measurement configuration (default): In normal measurement - * configuration the device follows normal measurement flow. Pins BP and BN - * are left floating and high impedance. + * From the datasheet: + * 0 - Normal measurement configuration (default): In normal measurement + * configuration the device follows normal measurement flow. Pins BP + * and BN are left floating and high impedance. * - * Positive bias configuration: In positive bias configuration, a positive - * current is forced across the resistive load on pins BP and BN. + * 1 - Positive bias configuration: In positive bias configuration, a + * positive current is forced across the resistive load on pins BP + * and BN. * - * Negative bias configuration. In negative bias configuration, a negative - * current is forced across the resistive load on pins BP and BN. + * 2 - Negative bias configuration. In negative bias configuration, a + * negative current is forced across the resistive load on pins BP + * and BN. * */ static s32 hmc5843_set_meas_conf(struct i2c_client *client, u8 meas_conf) { - struct hmc5843_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hmc5843_data *data = iio_priv(indio_dev); u8 reg_val; - reg_val = (meas_conf & MEAS_CONF_MASK) | (data->rate << RATE_OFFSET); + reg_val = (meas_conf & HMC5843_MEAS_CONF_MASK) | + (data->rate << HMC5843_RATE_OFFSET); return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); } @@ -260,7 +340,7 @@ static ssize_t hmc5843_show_measurement_configuration(struct device *dev, struct device_attribute *attr, char *buf) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct hmc5843_data *data = iio_priv(indio_dev); return sprintf(buf, "%d\n", data->meas_conf); } @@ -270,16 +350,20 @@ static ssize_t hmc5843_set_measurement_configuration(struct device *dev, const char *buf, size_t count) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct i2c_client *client = to_i2c_client(indio_dev->dev.parent); - struct hmc5843_data *data = i2c_get_clientdata(client); + struct hmc5843_data *data = iio_priv(indio_dev); unsigned long meas_conf = 0; - int error = strict_strtoul(buf, 10, &meas_conf); + int error; + + error = kstrtoul(buf, 10, &meas_conf); if (error) return error; - mutex_lock(&data->lock); + if (meas_conf >= HMC5843_MEAS_CONF_NOT_USED) + return -EINVAL; - dev_dbg(dev, "set mode to %lu\n", meas_conf); + mutex_lock(&data->lock); + dev_dbg(dev, "set measurement configuration to %lu\n", meas_conf); if (hmc5843_set_meas_conf(client, meas_conf)) { count = -EINVAL; goto exit; @@ -290,71 +374,85 @@ exit: mutex_unlock(&data->lock); return count; } + static IIO_DEVICE_ATTR(meas_conf, S_IWUSR | S_IRUGO, hmc5843_show_measurement_configuration, hmc5843_set_measurement_configuration, 0); -/* - * From Datasheet - * The table shows the minimum data output - * Value | Minimum data output rate(Hz) - * 0 | 0.5 - * 1 | 1 - * 2 | 2 - * 3 | 5 - * 4 | 10 (default) - * 5 | 20 - * 6 | 50 - * 7 | Not used - */ -static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("0.5 1 2 5 10 20 50"); +static ssize_t hmc5843_show_sampling_frequencies_available(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct hmc5843_data *data = iio_priv(indio_dev); + ssize_t total_n = 0; + int i; + + for (i = 0; i < HMC5843_RATE_NOT_USED; i++) { + ssize_t n = sprintf(buf, "%s ", data->variant->regval_to_sample_freq[i]); + buf += n; + total_n += n; + } + /* replace trailing space by newline */ + buf[-1] = '\n'; + + return total_n; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(hmc5843_show_sampling_frequencies_available); static s32 hmc5843_set_rate(struct i2c_client *client, u8 rate) { - struct hmc5843_data *data = i2c_get_clientdata(client); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hmc5843_data *data = iio_priv(indio_dev); u8 reg_val; - reg_val = (data->meas_conf) | (rate << RATE_OFFSET); - if (rate >= RATE_NOT_USED) { + if (rate >= HMC5843_RATE_NOT_USED) { dev_err(&client->dev, - "This data output rate is not supported\n"); + "data output rate is not supported\n"); return -EINVAL; } + + reg_val = data->meas_conf | (rate << HMC5843_RATE_OFFSET); return i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_A, reg_val); } -static ssize_t set_sampling_frequency(struct device *dev, +static int hmc5843_check_sampling_frequency(struct hmc5843_data *data, + const char *buf) +{ + const char * const *samp_freq = data->variant->regval_to_sample_freq; + int i; + + for (i = 0; i < HMC5843_RATE_NOT_USED; i++) { + if (sysfs_streq(buf, samp_freq[i])) + return i; + } + + return -EINVAL; +} + +static ssize_t hmc5843_set_sampling_frequency(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct i2c_client *client = to_i2c_client(indio_dev->dev.parent); struct hmc5843_data *data = iio_priv(indio_dev); - unsigned long rate = 0; - - if (strncmp(buf, "0.5" , 3) == 0) - rate = RATE_5; - else if (strncmp(buf, "1" , 1) == 0) - rate = RATE_10; - else if (strncmp(buf, "2", 1) == 0) - rate = RATE_20; - else if (strncmp(buf, "5", 1) == 0) - rate = RATE_50; - else if (strncmp(buf, "10", 2) == 0) - rate = RATE_100; - else if (strncmp(buf, "20" , 2) == 0) - rate = RATE_200; - else if (strncmp(buf, "50" , 2) == 0) - rate = RATE_500; - else - return -EINVAL; + int rate; + + rate = hmc5843_check_sampling_frequency(data, buf); + if (rate < 0) { + dev_err(&client->dev, + "sampling frequency is not supported\n"); + return rate; + } mutex_lock(&data->lock); - dev_dbg(dev, "set rate to %lu\n", rate); + dev_dbg(dev, "set rate to %d\n", rate); if (hmc5843_set_rate(client, rate)) { count = -EINVAL; goto exit; @@ -366,89 +464,79 @@ exit: return count; } -static ssize_t show_sampling_frequency(struct device *dev, +static ssize_t hmc5843_show_sampling_frequency(struct device *dev, struct device_attribute *attr, char *buf) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct i2c_client *client = to_i2c_client(indio_dev->dev.parent); struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + struct hmc5843_data *data = iio_priv(indio_dev); s32 rate; - rate = i2c_smbus_read_byte_data(client, this_attr->address); + rate = i2c_smbus_read_byte_data(client, this_attr->address); if (rate < 0) return rate; - rate = (rate & RATE_BITMASK) >> RATE_OFFSET; - return sprintf(buf, "%s\n", regval_to_samp_freq[rate]); + rate = (rate & HMC5843_RATE_BITMASK) >> HMC5843_RATE_OFFSET; + return sprintf(buf, "%s\n", data->variant->regval_to_sample_freq[rate]); } + static IIO_DEVICE_ATTR(sampling_frequency, S_IWUSR | S_IRUGO, - show_sampling_frequency, - set_sampling_frequency, + hmc5843_show_sampling_frequency, + hmc5843_set_sampling_frequency, HMC5843_CONFIG_REG_A); -/* - * From Datasheet - * Nominal gain settings - * Value | Sensor Input Field Range(Ga) | Gain(counts/ milli-gauss) - *0 |(+-)0.7 |1620 - *1 |(+-)1.0 |1300 - *2 |(+-)1.5 |970 - *3 |(+-)2.0 |780 - *4 |(+-)3.2 |530 - *5 |(+-)3.8 |460 - *6 |(+-)4.5 |390 - *7 |(+-)6.5 |280 - */ -static ssize_t show_range(struct device *dev, +static ssize_t hmc5843_show_range_gain(struct device *dev, struct device_attribute *attr, char *buf) { u8 range; - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct hmc5843_data *data = iio_priv(indio_dev); range = data->range; - return sprintf(buf, "%d\n", regval_to_input_field_mg[range]); + return sprintf(buf, "%d\n", data->variant->regval_to_input_field_mga[range]); } -static ssize_t set_range(struct device *dev, +static ssize_t hmc5843_set_range_gain(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct i2c_client *client = to_i2c_client(indio_dev->dev.parent); struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); struct hmc5843_data *data = iio_priv(indio_dev); unsigned long range = 0; int error; + mutex_lock(&data->lock); - error = strict_strtoul(buf, 10, &range); + error = kstrtoul(buf, 10, &range); if (error) { count = error; goto exit; } dev_dbg(dev, "set range to %lu\n", range); - if (range > RANGE_6_5) { + if (range > HMC5843_RANGE_GAIN_MAX) { count = -EINVAL; goto exit; } data->range = range; - range = range << RANGE_GAIN_OFFSET; + range = range << HMC5843_RANGE_GAIN_OFFSET; if (i2c_smbus_write_byte_data(client, this_attr->address, range)) count = -EINVAL; exit: mutex_unlock(&data->lock); return count; - } + static IIO_DEVICE_ATTR(in_magn_range, S_IWUSR | S_IRUGO, - show_range, - set_range, + hmc5843_show_range_gain, + hmc5843_set_range_gain, HMC5843_CONFIG_REG_B); static int hmc5843_read_raw(struct iio_dev *indio_dev, @@ -459,13 +547,13 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev, struct hmc5843_data *data = iio_priv(indio_dev); switch (mask) { - case 0: + case IIO_CHAN_INFO_RAW: return hmc5843_read_measurement(indio_dev, chan->address, val); case IIO_CHAN_INFO_SCALE: *val = 0; - *val2 = hmc5843_regval_to_nanoscale[data->range]; + *val2 = data->variant->regval_to_nanoscale[data->range]; return IIO_VAL_INT_PLUS_NANO; }; return -EINVAL; @@ -476,7 +564,8 @@ static int hmc5843_read_raw(struct iio_dev *indio_dev, .type = IIO_MAGN, \ .modified = 1, \ .channel2 = IIO_MOD_##axis, \ - .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT, \ .address = add \ } @@ -486,12 +575,18 @@ static const struct iio_chan_spec hmc5843_channels[] = { HMC5843_CHANNEL(Z, HMC5843_DATA_OUT_Z_MSB_REG), }; +static const struct iio_chan_spec hmc5883_channels[] = { + HMC5843_CHANNEL(X, HMC5843_DATA_OUT_X_MSB_REG), + HMC5843_CHANNEL(Y, HMC5883_DATA_OUT_Y_MSB_REG), + HMC5843_CHANNEL(Z, HMC5883_DATA_OUT_Z_MSB_REG), +}; + static struct attribute *hmc5843_attributes[] = { &iio_dev_attr_meas_conf.dev_attr.attr, &iio_dev_attr_operating_mode.dev_attr.attr, &iio_dev_attr_sampling_frequency.dev_attr.attr, &iio_dev_attr_in_magn_range.dev_attr.attr, - &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, NULL }; @@ -499,6 +594,33 @@ static const struct attribute_group hmc5843_group = { .attrs = hmc5843_attributes, }; +static const struct hmc5843_chip_info hmc5843_chip_info_tbl[] = { + [HMC5843_ID] = { + .channels = hmc5843_channels, + .num_channels = ARRAY_SIZE(hmc5843_channels), + .regval_to_sample_freq = hmc5843_regval_to_sample_freq, + .regval_to_input_field_mga = + hmc5843_regval_to_input_field_mga, + .regval_to_nanoscale = hmc5843_regval_to_nanoscale, + }, + [HMC5883_ID] = { + .channels = hmc5883_channels, + .num_channels = ARRAY_SIZE(hmc5883_channels), + .regval_to_sample_freq = hmc5883_regval_to_sample_freq, + .regval_to_input_field_mga = + hmc5883_regval_to_input_field_mga, + .regval_to_nanoscale = hmc5883_regval_to_nanoscale, + }, + [HMC5883L_ID] = { + .channels = hmc5883_channels, + .num_channels = ARRAY_SIZE(hmc5883_channels), + .regval_to_sample_freq = hmc5883_regval_to_sample_freq, + .regval_to_input_field_mga = + hmc5883l_regval_to_input_field_mga, + .regval_to_nanoscale = hmc5883l_regval_to_nanoscale, + }, +}; + static int hmc5843_detect(struct i2c_client *client, struct i2c_board_info *info) { @@ -518,18 +640,23 @@ static int hmc5843_detect(struct i2c_client *client, return 0; } -/* Called when we have found a new HMC5843. */ -static void hmc5843_init_client(struct i2c_client *client) +/* Called when we have found a new HMC58X3 */ +static void hmc5843_init_client(struct i2c_client *client, + const struct i2c_device_id *id) { struct iio_dev *indio_dev = i2c_get_clientdata(client); struct hmc5843_data *data = iio_priv(indio_dev); + data->variant = &hmc5843_chip_info_tbl[id->driver_data]; + indio_dev->channels = data->variant->channels; + indio_dev->num_channels = data->variant->num_channels; hmc5843_set_meas_conf(client, data->meas_conf); hmc5843_set_rate(client, data->rate); hmc5843_configure(client, data->operating_mode); i2c_smbus_write_byte_data(client, HMC5843_CONFIG_REG_B, data->range); mutex_init(&data->lock); - pr_info("HMC5843 initialized\n"); + + pr_info("%s initialized\n", id->name); } static const struct iio_info hmc5843_info = { @@ -545,35 +672,34 @@ static int hmc5843_probe(struct i2c_client *client, struct iio_dev *indio_dev; int err = 0; - indio_dev = iio_allocate_device(sizeof(*data)); + indio_dev = iio_device_alloc(sizeof(*data)); if (indio_dev == NULL) { err = -ENOMEM; goto exit; } - data = iio_priv(indio_dev); - /* default settings at probe */ - data->meas_conf = CONF_NORMAL; - data->range = RANGE_1_0; - data->operating_mode = MODE_CONVERSION_CONTINUOUS; + /* default settings at probe */ + data = iio_priv(indio_dev); + data->meas_conf = HMC5843_MEAS_CONF_NORMAL; + data->range = HMC5843_RANGE_GAIN_DEFAULT; + data->operating_mode = HMC5843_MODE_CONVERSION_CONTINUOUS; i2c_set_clientdata(client, indio_dev); - - /* Initialize the HMC5843 chip */ - hmc5843_init_client(client); + hmc5843_init_client(client, id); indio_dev->info = &hmc5843_info; indio_dev->name = id->name; - indio_dev->channels = hmc5843_channels; - indio_dev->num_channels = ARRAY_SIZE(hmc5843_channels); indio_dev->dev.parent = &client->dev; indio_dev->modes = INDIO_DIRECT_MODE; + err = iio_device_register(indio_dev); if (err) goto exit_free2; + return 0; + exit_free2: - iio_free_device(indio_dev); + iio_device_free(indio_dev); exit: return err; } @@ -584,8 +710,8 @@ static int hmc5843_remove(struct i2c_client *client) iio_device_unregister(indio_dev); /* sleep mode to save power */ - hmc5843_configure(client, MODE_SLEEP); - iio_free_device(indio_dev); + hmc5843_configure(client, HMC5843_MODE_SLEEP); + iio_device_free(indio_dev); return 0; } @@ -593,14 +719,18 @@ static int hmc5843_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int hmc5843_suspend(struct device *dev) { - hmc5843_configure(to_i2c_client(dev), MODE_SLEEP); + hmc5843_configure(to_i2c_client(dev), HMC5843_MODE_SLEEP); return 0; } static int hmc5843_resume(struct device *dev) { - struct hmc5843_data *data = i2c_get_clientdata(to_i2c_client(dev)); - hmc5843_configure(to_i2c_client(dev), data->operating_mode); + struct i2c_client *client = to_i2c_client(dev); + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct hmc5843_data *data = iio_priv(indio_dev); + + hmc5843_configure(client, data->operating_mode); + return 0; } @@ -611,7 +741,9 @@ static SIMPLE_DEV_PM_OPS(hmc5843_pm_ops, hmc5843_suspend, hmc5843_resume); #endif static const struct i2c_device_id hmc5843_id[] = { - { "hmc5843", 0 }, + { "hmc5843", HMC5843_ID }, + { "hmc5883", HMC5883_ID }, + { "hmc5883l", HMC5883L_ID }, { } }; MODULE_DEVICE_TABLE(i2c, hmc5843_id); @@ -630,5 +762,5 @@ static struct i2c_driver hmc5843_driver = { module_i2c_driver(hmc5843_driver); MODULE_AUTHOR("Shubhrajyoti Datta <shubhrajyoti@ti.com"); -MODULE_DESCRIPTION("HMC5843 driver"); +MODULE_DESCRIPTION("HMC5843/5883/5883L driver"); MODULE_LICENSE("GPL"); |