diff options
Diffstat (limited to 'drivers/staging/media/atomisp/include/linux/atomisp.h')
| -rw-r--r-- | drivers/staging/media/atomisp/include/linux/atomisp.h | 81 |
1 files changed, 0 insertions, 81 deletions
diff --git a/drivers/staging/media/atomisp/include/linux/atomisp.h b/drivers/staging/media/atomisp/include/linux/atomisp.h index bbbd904b696a..16c9da172c03 100644 --- a/drivers/staging/media/atomisp/include/linux/atomisp.h +++ b/drivers/staging/media/atomisp/include/linux/atomisp.h @@ -614,41 +614,6 @@ enum atomisp_camera_port { ATOMISP_CAMERA_NR_PORTS }; -/* Flash modes. Default is off. - * Setting a flash to TORCH or INDICATOR mode will automatically - * turn it on. Setting it to FLASH mode will not turn on the flash - * until the FLASH_STROBE command is sent. */ -enum atomisp_flash_mode { - ATOMISP_FLASH_MODE_OFF, - ATOMISP_FLASH_MODE_FLASH, - ATOMISP_FLASH_MODE_TORCH, - ATOMISP_FLASH_MODE_INDICATOR, -}; - -/* Flash statuses, used by atomisp driver to check before starting - * flash and after having started flash. */ -enum atomisp_flash_status { - ATOMISP_FLASH_STATUS_OK, - ATOMISP_FLASH_STATUS_HW_ERROR, - ATOMISP_FLASH_STATUS_INTERRUPTED, - ATOMISP_FLASH_STATUS_TIMEOUT, -}; - -/* Frame status. This is used to detect corrupted frames and flash - * exposed frames. Usually, the first 2 frames coming out of the sensor - * are corrupted. When using flash, the frame before and the frame after - * the flash exposed frame may be partially exposed by flash. The ISP - * statistics for these frames should not be used by the 3A library. - * The frame status value can be found in the "reserved" field in the - * v4l2_buffer struct. */ -enum atomisp_frame_status { - ATOMISP_FRAME_STATUS_OK, - ATOMISP_FRAME_STATUS_CORRUPTED, - ATOMISP_FRAME_STATUS_FLASH_EXPOSED, - ATOMISP_FRAME_STATUS_FLASH_PARTIAL, - ATOMISP_FRAME_STATUS_FLASH_FAILED, -}; - enum atomisp_ext_isp_id { EXT_ISP_CID_ISO = 0, EXT_ISP_CID_CAPTURE_HDR, @@ -661,7 +626,6 @@ enum atomisp_ext_isp_id { EXT_ISP_CID_AF_STATUS, EXT_ISP_CID_GET_AF_MODE, EXT_ISP_CID_CAPTURE_BURST, - EXT_ISP_CID_FLASH_MODE, EXT_ISP_CID_ZOOM, EXT_ISP_CID_SHOT_MODE }; @@ -694,12 +658,6 @@ enum atomisp_burst_capture_options { EXT_ISP_BURST_CAPTURE_CTRL_STOP }; -#define EXT_ISP_FLASH_MODE_OFF 0 -#define EXT_ISP_FLASH_MODE_ON 1 -#define EXT_ISP_FLASH_MODE_AUTO 2 -#define EXT_ISP_LED_TORCH_OFF 3 -#define EXT_ISP_LED_TORCH_ON 4 - #define EXT_ISP_SHOT_MODE_AUTO 0 #define EXT_ISP_SHOT_MODE_BEAUTY_FACE 1 #define EXT_ISP_SHOT_MODE_BEST_PHOTO 2 @@ -837,9 +795,6 @@ enum atomisp_burst_capture_options { #define ATOMISP_IOC_S_PARAMETERS \ _IOW('v', BASE_VIDIOC_PRIVATE + 32, struct atomisp_parameters) -#define ATOMISP_IOC_EXT_ISP_CTRL \ - _IOWR('v', BASE_VIDIOC_PRIVATE + 35, struct atomisp_ext_isp_ctrl) - #define ATOMISP_IOC_EXP_ID_UNLOCK \ _IOW('v', BASE_VIDIOC_PRIVATE + 36, int) @@ -897,34 +852,6 @@ enum atomisp_burst_capture_options { * Exposure, Flash and privacy (indicator) light controls, to be upstreamed */ #define V4L2_CID_CAMERA_LASTP1 (V4L2_CID_CAMERA_CLASS_BASE + 1024) -/* Flash related CIDs, see also: - * http://linuxtv.org/downloads/v4l-dvb-apis/extended-controls.html\ - * #flash-controls */ - -/* Request a number of flash-exposed frames. The frame status can be - * found in the reserved field in the v4l2_buffer struct. */ -#define V4L2_CID_REQUEST_FLASH (V4L2_CID_CAMERA_LASTP1 + 3) -/* Query flash driver status. See enum atomisp_flash_status above. */ -#define V4L2_CID_FLASH_STATUS (V4L2_CID_CAMERA_LASTP1 + 5) -/* Set the flash mode (see enum atomisp_flash_mode) */ -#define V4L2_CID_FLASH_MODE (V4L2_CID_CAMERA_LASTP1 + 10) - -/* VCM slew control */ -#define V4L2_CID_VCM_SLEW (V4L2_CID_CAMERA_LASTP1 + 11) -/* VCM step time */ -#define V4L2_CID_VCM_TIMING (V4L2_CID_CAMERA_LASTP1 + 12) - -/* Query Focus Status */ -#define V4L2_CID_FOCUS_STATUS (V4L2_CID_CAMERA_LASTP1 + 14) - -/* number of frames to skip at stream start */ -#define V4L2_CID_G_SKIP_FRAMES (V4L2_CID_CAMERA_LASTP1 + 17) - -/* Query sensor's 2A status */ -#define V4L2_CID_2A_STATUS (V4L2_CID_CAMERA_LASTP1 + 18) -#define V4L2_2A_STATUS_AE_READY BIT(0) -#define V4L2_2A_STATUS_AWB_READY BIT(1) - #define V4L2_CID_RUN_MODE (V4L2_CID_CAMERA_LASTP1 + 20) #define ATOMISP_RUN_MODE_VIDEO 1 #define ATOMISP_RUN_MODE_STILL_CAPTURE 2 @@ -944,9 +871,6 @@ enum atomisp_burst_capture_options { #define ATOMISP_VFPP_DISABLE_SCALER 1 #define ATOMISP_VFPP_DISABLE_LOWLAT 2 -/* Query real flash status register value */ -#define V4L2_CID_FLASH_STATUS_REGISTER (V4L2_CID_CAMERA_LASTP1 + 26) - #define V4L2_CID_START_ZSL_CAPTURE (V4L2_CID_CAMERA_LASTP1 + 28) /* Lock and unlock raw buffer */ #define V4L2_CID_ENABLE_RAW_BUFFER_LOCK (V4L2_CID_CAMERA_LASTP1 + 29) @@ -955,11 +879,6 @@ enum atomisp_burst_capture_options { /* Disable digital zoom */ #define V4L2_CID_DISABLE_DZ (V4L2_CID_CAMERA_LASTP1 + 32) -#define V4L2_CID_TEST_PATTERN_COLOR_R (V4L2_CID_CAMERA_LASTP1 + 33) -#define V4L2_CID_TEST_PATTERN_COLOR_GR (V4L2_CID_CAMERA_LASTP1 + 34) -#define V4L2_CID_TEST_PATTERN_COLOR_GB (V4L2_CID_CAMERA_LASTP1 + 35) -#define V4L2_CID_TEST_PATTERN_COLOR_B (V4L2_CID_CAMERA_LASTP1 + 36) - #define V4L2_CID_ATOMISP_SELECT_ISP_VERSION (V4L2_CID_CAMERA_LASTP1 + 38) #define V4L2_BUF_FLAG_BUFFER_INVALID 0x0400 |