diff options
Diffstat (limited to 'drivers/staging/r8188eu/hal/HalPwrSeqCmd.c')
| -rw-r--r-- | drivers/staging/r8188eu/hal/HalPwrSeqCmd.c | 118 |
1 files changed, 101 insertions, 17 deletions
diff --git a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c index 150ea380c39e..6c0b1368383d 100644 --- a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c +++ b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c @@ -3,25 +3,116 @@ #include "../include/HalPwrSeqCmd.h" -u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[]) +#define PWR_CMD_WRITE 0x01 + /* offset: the read register offset */ + /* msk: the mask of the write bits */ + /* value: write value */ + /* note: driver shall implement this cmd by read & msk after write */ + +#define PWR_CMD_POLLING 0x02 + /* offset: the read register offset */ + /* msk: the mask of the polled value */ + /* value: the value to be polled, masked by the msd field. */ + /* note: driver shall implement this cmd by */ + /* do{ */ + /* if ( (Read(offset) & msk) == (value & msk) ) */ + /* break; */ + /* } while (not timeout); */ + +#define PWR_CMD_DELAY 0x03 + /* offset: the value to delay (in us) */ + /* msk: N/A */ + /* value: N/A */ + +struct wl_pwr_cfg { + u16 offset; + u8 cmd:4; + u8 msk; + u8 value; +}; + +#define GET_PWR_CFG_OFFSET(__PWR_CMD) __PWR_CMD.offset +#define GET_PWR_CFG_CMD(__PWR_CMD) __PWR_CMD.cmd +#define GET_PWR_CFG_MASK(__PWR_CMD) __PWR_CMD.msk +#define GET_PWR_CFG_VALUE(__PWR_CMD) __PWR_CMD.value + +static struct wl_pwr_cfg rtl8188E_power_on_flow[] = { + { 0x0006, PWR_CMD_POLLING, BIT(1), BIT(1) }, + { 0x0002, PWR_CMD_WRITE, BIT(0) | BIT(1), 0 }, /* reset BB */ + { 0x0026, PWR_CMD_WRITE, BIT(7), BIT(7) }, /* schmitt trigger */ + { 0x0005, PWR_CMD_WRITE, BIT(7), 0 }, /* disable HWPDN (control by DRV)*/ + { 0x0005, PWR_CMD_WRITE, BIT(4) | BIT(3), 0 }, /* disable WL suspend*/ + { 0x0005, PWR_CMD_WRITE, BIT(0), BIT(0) }, + { 0x0005, PWR_CMD_POLLING, BIT(0), 0 }, + { 0x0023, PWR_CMD_WRITE, BIT(4), 0 }, +}; + +static struct wl_pwr_cfg rtl8188E_card_disable_flow[] = { + { 0x001F, PWR_CMD_WRITE, 0xFF, 0 }, /* turn off RF */ + { 0x0023, PWR_CMD_WRITE, BIT(4), BIT(4) }, /* LDO Sleep mode */ + { 0x0005, PWR_CMD_WRITE, BIT(1), BIT(1) }, /* turn off MAC by HW state machine */ + { 0x0005, PWR_CMD_POLLING, BIT(1), 0 }, + { 0x0026, PWR_CMD_WRITE, BIT(7), BIT(7) }, /* schmitt trigger */ + { 0x0005, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) }, /* enable WL suspend */ + { 0x0007, PWR_CMD_WRITE, 0xFF, 0 }, /* enable bandgap mbias in suspend */ + { 0x0041, PWR_CMD_WRITE, BIT(4), 0 }, /* Clear SIC_EN register */ + { 0xfe10, PWR_CMD_WRITE, BIT(4), BIT(4) }, /* Set USB suspend enable local register */ +}; + +/* This is used by driver for LPSRadioOff Procedure, not for FW LPS Step */ +static struct wl_pwr_cfg rtl8188E_enter_lps_flow[] = { + { 0x0522, PWR_CMD_WRITE, 0xFF, 0x7F },/* Tx Pause */ + { 0x05F8, PWR_CMD_POLLING, 0xFF, 0 }, /* Should be zero if no packet is transmitted */ + { 0x05F9, PWR_CMD_POLLING, 0xFF, 0 }, /* Should be zero if no packet is transmitted */ + { 0x05FA, PWR_CMD_POLLING, 0xFF, 0 }, /* Should be zero if no packet is transmitted */ + { 0x05FB, PWR_CMD_POLLING, 0xFF, 0 }, /* Should be zero if no packet is transmitted */ + { 0x0002, PWR_CMD_WRITE, BIT(0), 0 }, /* CCK and OFDM are disabled, clocks are gated */ + { 0x0002, PWR_CMD_DELAY, 0, 0 }, + { 0x0100, PWR_CMD_WRITE, 0xFF, 0x3F }, /* Reset MAC TRX */ + { 0x0101, PWR_CMD_WRITE, BIT(1), 0 }, /* check if removed later */ + { 0x0553, PWR_CMD_WRITE, BIT(5), BIT(5) }, /* Respond TxOK to scheduler */ +}; + +u8 HalPwrSeqCmdParsing(struct adapter *padapter, enum r8188eu_pwr_seq seq) { struct wl_pwr_cfg pwrcfgcmd = {0}; + struct wl_pwr_cfg *pwrseqcmd; u8 poll_bit = false; - u32 aryidx = 0; + u8 idx, num_steps; u8 value = 0; u32 offset = 0; u32 poll_count = 0; /* polling autoload done. */ u32 max_poll_count = 5000; + int res; + + switch (seq) { + case PWR_ON_FLOW: + pwrseqcmd = rtl8188E_power_on_flow; + num_steps = ARRAY_SIZE(rtl8188E_power_on_flow); + break; + case DISABLE_FLOW: + pwrseqcmd = rtl8188E_card_disable_flow; + num_steps = ARRAY_SIZE(rtl8188E_card_disable_flow); + break; + case LPS_ENTER_FLOW: + pwrseqcmd = rtl8188E_enter_lps_flow; + num_steps = ARRAY_SIZE(rtl8188E_enter_lps_flow); + break; + default: + return false; + } - do { - pwrcfgcmd = pwrseqcmd[aryidx]; + for (idx = 0; idx < num_steps; idx++) { + pwrcfgcmd = pwrseqcmd[idx]; switch (GET_PWR_CFG_CMD(pwrcfgcmd)) { case PWR_CMD_WRITE: offset = GET_PWR_CFG_OFFSET(pwrcfgcmd); /* Read the value from system register */ - value = rtw_read8(padapter, offset); + res = rtw_read8(padapter, offset, &value); + if (res) + return false; value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd)); value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd)); @@ -33,7 +124,9 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[]) poll_bit = false; offset = GET_PWR_CFG_OFFSET(pwrcfgcmd); do { - value = rtw_read8(padapter, offset); + res = rtw_read8(padapter, offset, &value); + if (res) + return false; value &= GET_PWR_CFG_MASK(pwrcfgcmd); if (value == (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd))) @@ -46,20 +139,11 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[]) } while (!poll_bit); break; case PWR_CMD_DELAY: - if (GET_PWR_CFG_VALUE(pwrcfgcmd) == PWRSEQ_DELAY_US) - udelay(GET_PWR_CFG_OFFSET(pwrcfgcmd)); - else - udelay(GET_PWR_CFG_OFFSET(pwrcfgcmd) * 1000); - break; - case PWR_CMD_END: - /* When this command is parsed, end the process */ - return true; + udelay(GET_PWR_CFG_OFFSET(pwrcfgcmd)); break; default: break; } - - aryidx++;/* Add Array Index */ - } while (1); + } return true; } |